Thanks for view post. I found some problem on step review in-app-purchase. All item in app purchase hold on "Developer Action Needed" then I check issue i found it because all item in section App Store Localization rejected. I don't know why it rejected on board don't show any information that why it was rejected. if who know please suggest me. I try many renew create item but every i resume for submit it every time it was reject aways I attached example my rejected image below thanks.

On iOS 26 I’m seeing a small stutter when dismissing a SwiftUI .sheet with the swipe-down gesture. The same code was smooth on iOS 18. Has anyone else experienced this issue?

I’m seeing a regression in Xcode 26.4 where Interface Builder will not allow connecting IBOutlets or IBActions. Symptoms: The usual gutter circle/dot does not appear next to IBOutlet / IBAction in the code editor Because of this, I cannot: drag from storyboard → code drag from code → storyboard The class is valid and already connected to the storyboard (existing outlets work) Assistant Editor opens the correct view controller file Important: The exact same project, unchanged, works perfectly in Xcode 26.3. I can create and connect outlets/actions normally there. ⸻ Environment Xcode: 26.4 macOS: 26.4 Mac Mini M4 Pro 64G Ram Project: Objective-C UIKit app using Storyboards This is a long-running, ObjC, project (not newly created) ⸻ What I’ve already tried To rule out the usual suspects: Verified View Controller Custom Class is correctly set in Identity Inspector Verified files are in the correct Target Membership Verified outlets are declared correctly in the .h file: @property (weak, nonatomic) IBOutlet UILabel *exampleLabel; Opened correct file manually (not relying on Automatic Assistant) Tried both: storyboard → code drag code → storyboard drag Tried using Connections Inspector Clean Build Folder Deleted entire DerivedData Restarted Xcode Updated macOS to 26.4 Ran: sudo xcodebuild -runFirstLaunch Confirmed required platform components installed Reopened project fresh ⸻ Observations In Xcode 26.4 the outlet “connection circles” are completely missing In Xcode 26.3 they appear immediately for the same code Existing connections still function at runtime — this is purely an Interface Builder issue ⸻ Question The gutter circles appearance has always been flaky in Xcode over the 13+ years I've been using it but now with 26.4 they have completely disappeared. Has anyone else seen this in Xcode 26.4, or found a workaround? At this point it looks like a regression in Interface Builder, but I haven’t found any mention of it yet.

Hi guys, I just joined the dev program, and I am a new coder. I started using swift playground and I am loving it! Is there any other apps that help me to learn coding? Would love to hear some stuff. Thanks.

Hi, we are developing a screen time management app. The app locks the device after it was used for specified amount of time. After updating to iOS 26.2, we noticed a huge issue: the events started to fire (reach the threshold) in the DeviceActivityMonitorExtension prematurely, almost immediately after scheduling. The only solution we've found is to delete the app and reboot the device, but the effect is not lasting long and this does not always help. Before updating to iOS 26, events also used to sometimes fire prematurely, but rescheduling the event often helped. Now the rescheduling happens almost every second and the events keep reaching the threshold prematurely. Can you suggest any workarounds for this issue?

Summary I'm implementing NEURLFilter with the com.apple.developer.networking.networkextension.url-filter-provider entitlement for a system-wide URL filtering feature. The feature works perfectly in development-signed builds (connecting successfully to my PIR server over extended testing) but every production-signed build fails before any network call is made. NEURLFilterManager reports .serverSetupIncomplete (code 9). After installing the NetworkExtension debug profile, the unredacted com.apple.CipherML logs reveal the cause: no privacy proxy is provisioned for this bundle identifier, and the connection is configured proxy fail closed. Environment iOS 26 Entitlement: com.apple.developer.networking.networkextension.url-filter-provider Extension point: com.apple.networkextension.url-filter-control PIR server configured via NEURLFilterManager.setConfiguration(...) Privacy Pass issuer configured Dev-signed builds: working correctly, connecting to the PIR server Production-signed builds (both TestFlight and distribution): failing identically The Error Chain Surfaced to the app via NEURLFilterManager.lastDisconnectError: NEURLFilterManager.Error.serverSetupIncomplete (code 9) ← NEAgentURLFilterErrorDomain Code 3 ← com.apple.CipherML Code 1100 "Unable to query status" ← com.apple.CipherML Code 1800 (error details were logged and redacted) After installing the VPN (NetworkExtension) debug profile, the unredacted com.apple.CipherML subsystem shows: queryStatus(for:options:) threw an error: Error Domain=NSURLErrorDomain Code=-1009 "The Internet connection appears to be offline." UserInfo={ _NSURLErrorNWPathKey = satisfied (Path is satisfied), interface: en0[802.11], ipv4, dns, uses wifi, LQM: good, NSErrorFailingURLKey = https://<my-pir-server>/config, NSUnderlyingError = { Error Domain=NSPOSIXErrorDomain Code=50 "Network is down" }, _NSURLErrorPrivacyProxyFailureKey = true, NSLocalizedDescription = "The Internet connection appears to be offline." } The critical diagnostic line in the com.apple.network subsystem is: nw_endpoint_proxy_handler_should_use_proxy Proxies not present, but required to fail closed And the connection setup shows the proxy fail closed flag is mandatory for the connection: [C... ... Hostname#...:443 quic, bundle id: <my-bundle-id>, attribution: developer, using ephemeral configuration, context: NWURLSession (sensitive), proxy fail closed] start The network path itself is healthy (Wi-Fi good, DNS resolves correctly), but the connection is explicitly configured to fail closed if no proxy is present, and no proxy is provisioned for this bundle identifier. The entire failure happens in approximately 18 ms, far too fast for any network round-trip, confirming no traffic ever leaves the device. What I've Verified The entitlement is present in the distribution build The NEURLFilterControlProvider extension loads and returns a valid Bloom filter prefilter (with a tag that round-trips correctly between extension and framework) NEURLFilterManager.setConfiguration(pirServerURL:pirPrivacyPassIssuerURL:pirAuthenticationToken:controlProviderBundleIdentifier:) accepts all four parameters without error Development-signed builds of the same bundle identifier connect successfully to the same PIR server On production-signed builds, zero requests reach the PIR server — failure is purely client-side, before any network activity The Question How does the OHTTP privacy proxy get provisioned for a bundle identifier so that production builds can successfully use NEURLFilter? Specifically: Is there a Capability Request form I need to submit for url-filter-provider? I cannot find one in the Capability Requests section of my developer portal. Should I be running my own OHTTP gateway (for example using swift-nio-oblivious-http), and if so, does Apple then need to provision routing from their OHTTP relay to my gateway URL? Is the OHTTP relay path meant to be automatic once the entitlement is active, and if so, is there a specific activation step I'm missing? Is there any way to verify the current provisioning state for a specific bundle identifier from the developer portal? I can provide the full sysdiagnose and unredacted bundle/server details privately to an Apple engineer if that would help diagnose. I'd prefer to keep them out of a public post. Thanks!

I’ve had an issue with all of my apps. Where I push my build to TestFlight and then the image pops up. I’ve troubleshooted EVERYTHING. My account has no issues on it, no payment or compliance issues. I’ve looked to reddit for advice, one user says they need there app to get approved by apple, i got a couple apps to have there update approve, still the bug persist. Whether the app is on the App Store or a work in progress nothing works.

I have an issue where I’m pushing out my builds to TestFlight, it goes through. sometimes there’s an error saying that it can’t download but if I try a couple times it goes through. but when I go through and look at my app (That TestFlight says is running the updated version) all I see is the old version

I have submitted my application for one month, but it is still awaiting review. So I resubmitted it for review. I am the owner of this application and I also requested an expedited review. I also consulted Apple and contacted them several times through the "Contact Us" option, but the reply always said that it would take some time. Therefore, we can only seek help from the review staff here. Application ID: 675550806

Hello everyone, I am experiencing a layout issue in a SwiftUI project where an icon inside a button becomes laggy after the keyboard is dismissed. I have a custom input bar designed with an HStack containing a TextField and a Button with a microphone.fill icon. The entire HStack is styled using a .clipShape(.capsule) and a background color and I am using @FocusState to manage the keyboard focus. When the user taps the TextField, the keyboard appears, and the entire view moves up correctly to make room. But when the keyboard is dismissed by the button action isPromptFieldFocused = false, the capsule-shaped background and the text field return to their original position, but the icon on the button (and just the icon) doesn't. The microphone icon inside the button does not follow the movement. It remains stuck at the "keyboard-up" height for a moment until the view is refreshed, breaking the UI. And by the way, the icon correctly returns to its original position with the other UI elements if the user presses the return key on their keyboard. import SwiftUI struct ContentView: View { @State var userText: String = "" @FocusState var isTextFieldFocused: Bool var body: some View { HStack { TextField("Type here...", text: $userText) .focused($isTextFieldFocused) .textInputAutocapitalization(.sentences) .textFieldStyle(PlainTextFieldStyle()) .padding(.leading, 12) .padding(.trailing, 4) Button(action: { print("Microphone pressed") isPromptFieldFocused = false }) { Image(systemName: "microphone.fill") .font(.system(size: 22, weight: .semibold)) .foregroundStyle(.white) .padding(14) } .background(Color.black) .clipShape(Circle()) .padding(.trailing, 14) .padding(.vertical, 14) } .background(Color.lightGray) .clipShape(Capsule()) .padding() } } I've already tried using different animation types (e.g., .default, .spring) and explicitly setting the frame of the button. Has anyone encountered this specific behavior where an Image(systemName:) ignores the parent container's transition during keyboard dismissal? I would appreciate any insights on how to ensure the entire HStack and its children animate back down in sync.

iPhone 14(iOS 26.4) MacBook Air M4 (macOS 26.4) When I mirror with iPhone on Mac, the enter key is always pressed automatically uncontrollably, causing the search bar and other related scenes to fail. And AirPods Pro 2nd generation will switch between Mac and iPhone by mistake, when iPhone and Mac are not playing

[SKStoreReviewController requestReviewInScene:] no longer displays the review prompt in debug/development builds on iOS 26.5 beta (23F5043k and 23F5043g). According to Apple's documentation, the review prompt should always appear in debug builds to facilitate testing. This was working in previous iOS versions (iOS 26.4 and older). Steps to reproduce: Run app from Xcode in debug configuration on a device running iOS 26.5 beta (23F5043k or 23F5043g) Call [SKStoreReviewController requestReviewInScene:windowScene] with a valid, foreground-active UIWindowScene Observe that the method executes without error (scene is valid per NSLog) but no review prompt appears Expected: Review prompt should display in debug builds Actual: No prompt appears, despite the scene being valid and foreground-active This worked correctly on previous iOS versions (26.4) so looks like this bug was introduced in 26.5 Beta versions. I have already filed a bug report in Feedback Assistant with number: FB22445620

Hello, My app, Beezzy - Agenda Digital, had an Expedited Review request approved recently (confirmation received via email). However, the status remains stuck in 'Waiting for Review' for an unusual amount of time, even for an expedited process. This update is critical for our operations and addresses urgent fixes. Has anyone else experienced a delay between the expedited approval and the actual 'In Review' transition lately? Is there any additional step required from the developer side to trigger the priority queue? App ID: 6751509489 Thank you for any guidance.

The assets in the Asset.xcasset lesser than the asset in the Assets.car file. Because of this the iPA file size increased three times as Assets.car file inside the iPA increased. Why do the asset file size increased enormously. How do we prevent this ? I used Version 26.2 (17C52).

StoreKit2 Repro Notes: the latest renewal appears in Transaction.unfinished after restore (2026-04-05) 1. Issue Summary In the current project, during a normal cold launch: Transaction.latest(for:) returns a value for the weekly subscription Transaction.all returns the full subscription history chain Transaction.unfinished is empty However, after tapping Restore Purchases and calling AppStore.sync(), one "latest renewal" transaction appears in Transaction.unfinished. This behavior looks more like a system-side replay triggered by AppStore.sync() than a consistently unfinished transaction during a normal launch. 2. Affected Product Product: do.i.iapc.vip.week Transaction chain characteristics: All transactions belong to the same auto-renewable subscription chain originalTransactionID = 2000001143446796 The transaction that appears in unfinished is usually the latest or last renewal in the chain 3. Current Code Path During app startup: loadProducts() Debug snapshot for Transaction.latest(for:) Debug snapshot for Transaction.all Scan Transaction.unfinished refreshEntitlements() During restore purchases: Call AppStore.sync() Scan Transaction.unfinished refreshEntitlements() 4. Preconditions A Sandbox test account is used The weekly subscription do.i.iapc.vip.week already has multiple historical renewal transactions The subscription is already expired, so entitlements = 0 during a normal launch The issue is easier to reproduce on an iOS 26.4 device The issue was not consistently reproduced on another iOS 18.2 device 5. Reproduction Steps Path A: Normal cold launch Launch the app Observe the logs: LatestTransaction snapshot AllTransaction snapshot summary unfinished processing result Observed result: latest has a value all contains the full history chain unfinishedHandledCount = 0 Path B: Tap Restore Purchases Launch the app Tap Restore Purchases Trigger AppStore.sync() Observe the logs: restore started unfinished processing started unfinished transaction received Observed result: After restore, one "latest renewal" transaction appears in unfinished That same transaction does not necessarily appear during a normal cold launch 6. Expected Result If a transaction has already been successfully finished in the past, it should not appear again as unfinished after Restore Purchases. A stricter expectation is: During a normal cold launch, unfinished = 0 After tapping Restore Purchases, unfinished should still remain 0 7. Actual Result Actual behavior: Normal cold launch: unfinished = 0 After Restore Purchases: one "latest renewal" transaction appears again in unfinished This suggests that AppStore.sync() may replay the most recent historical subscription transaction. 8. Current Assessment Based on the current logs, the issue is more likely to be: Related to AppStore.sync() / StoreKit / Sandbox replay behavior on the system side Easier to reproduce on iOS 26.4 Less likely to be caused by a persistent app-side bug where finish() is missed during a normal startup flow Reasons: During a normal launch, unfinished = 0 The behavior is inconsistent across devices and OS versions, even with the same Sandbox account latest, all, and unfinished can be clearly separated during a normal cold launch 9. Suggested Engineering Position Suggested wording for internal or external communication: In the iOS 26.4 + Sandbox environment, calling AppStore.sync() may cause StoreKit to replay the latest historical subscription transaction into Transaction.unfinished. Since the same transaction does not necessarily appear during a normal cold launch, the issue currently looks more like a system/environment-specific behavior difference than an app-side bug where finish() is consistently missed during the regular startup path. 10. Additional Evidence That Can Be Collected If this needs to be escalated to the team or to Apple, the following would strengthen the report: Full log comparison before and after tapping Restore Purchases The same transactionId compared between normal launch and post-restore behavior Cross-device comparison on different iOS versions A minimal reproducible sample project and Sandbox test record

Hi everyone, I'm building an app in Xcode 16.4 with a minimum deployment target of iOS 12. The last time I built with this configuration was November 2025 — that build worked perfectly fine. I'm aware that builds from Xcode 16.4 will no longer be accepted by Apple after April 28, 2026, so I decided to push one final update before that deadline. Here's what I did: Built the app with no changes to build settings Uploaded to TestFlight Tested on iOS 12, iOS 26, and a few other versions — everything looked good Passed App Review Published to the App Store Now users on iOS 12 are reporting that the app crashes immediately on launch. Users on iOS 13-26 are unaffected. We've effectively lost a significant portion of our users overnight. We'd really like to restore functionality for them before April 28 — after that we plan to raise the minimum deployment target anyway. There are no crash logs available, as the app appears to never reach application code at all. Below are the relevant logs from Console.app: default 16:33:49.012231+0400 SpringBoard Bootstrapping MY_BUNDLE_ID with intent foreground-interactive error 16:33:49.021533+0400 SpringBoard [MY_BUNDLE_ID] Bootstrap failed with error: <NSError: 0x280f59aa0; domain: BKSProcessErrorDomain; code: 1 (bootstrap-failed); reason: "Failed to start job"> error 16:33:49.021748+0400 SpringBoard Bootstrapping failed for <FBApplicationProcess: 0x101cb4070; MY_BUNDLE_ID; pid: -1> with error: Error Domain=BKSProcessErrorDomain Code=1 "Unable to bootstrap process with bundleID MY_BUNDLE_ID" UserInfo={NSLocalizedDescription=Unable to bootstrap process with bundleID MY_BUNDLE_ID, BKSProcessExitReason=0, NSLocalizedFailureReason=Failed to start job, NSUnderlyingError=0x280f58780 {Error Domain=NSPOSIXErrorDomain Code=3 "No such process" UserInfo={NSLocalizedFailureReason=The process failed to exec, NSLocalizedRecoverySuggestion=Consult /var/log/com.apple.xpc.launchd/launchd.log for more information, NSLocalizedDescription=Unable to get valid task name port right for pid 241}}, BSErrorCodeDescription=bootstrap-failed} default 16:33:49.021934+0400 SpringBoard Adding: <FBApplicationProcess: 0x101cb4070; MY_BUNDLE_ID; pid: -1> default 16:33:49.022111+0400 SpringBoard <FBApplicationProcess: 0x101cb4070; MY_BUNDLE_ID; pid: -1> exited. default 16:33:49.023325+0400 SpringBoard Removing: <FBApplicationProcess: 0x101cb4070; MY_BUNDLE_ID; pid: -1> default 16:33:49.039576+0400 assertiond Submitting new job for "MY_BUNDLE_ID" on behalf of <BKProcess: 0x100d119f0; SpringBoard; com.apple.springboard; pid: 48; agency: SystemShell; visibility: foreground; task: running> default 16:33:49.039982+0400 assertiond Submitted job with label: UIKitApplication:MY_BUNDLE_ID[0xed03][58] error 16:33:49.040128+0400 assertiond Unable to obtain a task name port right for pid 241: (os/kern) failure (0x5) error 16:33:49.040286+0400 assertiond Failed to start job with error <NSError: 0x100c3f180; domain: NSPOSIXErrorDomain; code: 3; reason: "The process failed to exec"> { description = "Unable to get valid task name port right for pid 241"; failureReason = "The process failed to exec"; recoverySuggestion = "Consult /var/log/com.apple.xpc.launchd/launchd.log for more information"; Has anyone encountered this recently? Any help would be greatly appreciated. P.S. I tried rebuilding from scratch without any code changes and uploading a fresh build to TestFlight — but now it won't even launch from TestFlight on iOS 12.

I’m developing an iOS application and aiming to install a PKCS#12 (.p12) certificate into the com.apple.token keychain access group so that Microsoft Edge for iOS, managed via MDM/Intune, can read and use it for client certificate authentication. I’m attempting to save to the com.apple.token keychain access group, but I’m getting error -34018 (errSecMissingEntitlement) and the item isn’t saved. This occurs on both a physical device and the simulator. I’m using SecItemAdd from the Security framework to store it. Is this the correct approach? https://developer.apple.com/documentation/security/secitemadd(::) I have added com.apple.token to Keychain Sharing. I have also added com.apple.token to the app’s entitlements. Here is the code I’m using to observe this behavior: public static func installToTokenGroup(p12Data: Data, password: String) throws -> SecIdentity { // First, import the P12 to get the identity let options: [String: Any] = [ kSecImportExportPassphrase as String: password ] var items: CFArray? let importStatus = SecPKCS12Import(p12Data as CFData, options as CFDictionary, &items) guard importStatus == errSecSuccess, let array = items as? [[String: Any]], let dict = array.first else { throw NSError(domain: NSOSStatusErrorDomain, code: Int(importStatus), userInfo: [NSLocalizedDescriptionKey: "Failed to import P12: \(importStatus)"]) } let identity = dict[kSecImportItemIdentity as String] as! SecIdentity let addQuery: [String: Any] = [ kSecClass as String: kSecClassIdentity, kSecValueRef as String: identity, kSecAttrLabel as String: kSecAttrAccessGroupToken, kSecAttrAccessible as String: kSecAttrAccessibleAfterFirstUnlock, kSecAttrAccessGroup as String: kSecAttrAccessGroupToken ] let status = SecItemAdd(addQuery as CFDictionary, nil) if status != errSecSuccess && status != errSecDuplicateItem { throw NSError(domain: NSOSStatusErrorDomain, code: Int(status), userInfo: [NSLocalizedDescriptionKey: "Failed to add to token group: \(status)"]) } return identity }

Hello, I released a new build for my app but it fails to run on iOS 12.5.8 (tested on iPad Air, iPhone 6, iPhone 5s). The launch storybard is shown, then the app stops abruptly. There is no crash log. It runs fine on iOS 13 or higher. Xcode 26.3 was showing a call stack (something with UIView) that did not include any app code. Now with Xcode 26.4 (and its new command line tools) there is an info popup with a debug metadata dump. However, I don’t intend to focus on Xcode here because it officially does not support iOS 12. It’s ok if I cannot debug, I just want the app to run on the device like the previous build did. Since there is no crash log, and the console is showing a bootstrap error, I believe my app code has not been executed and is therefore not at fault. Build 674 released on 23-Mar-2026: worked fine on iOS 12, built with Xcode 26.3 Build 675 released on 29-Mar-2026: Bootstrap error as described, with both Xcode 26.3 and 26.4 Deployment target = 12.4 Tried Instruments but it fails as soon as I hit record. In the console I found BKSProcessErrorDomain code 1. Here on the forum I found a post where the cause was no internet access but my device does have internet access. I made only very little code changes to my app between 674 and 675, no storyboard updates. I get the impression the loader does not even begin to execute my code. At this point I wonder if: some certificate has expired (see release dates above), or if something is incompatible in my main storyboard (though I did not change anything there), or the device ran out of memory (1 GB) Note: The app has 4 targets: main app target framework AU app extension intents app extension Thanks, Sven PS: Misclicked subtopic which should have been General (sorry). Here’s the redacted console excerpt: standard 22:21:13.187990+0200 SpringBoard Evaluate: making new window key: <SBMainSwitcherWindow: 0x159e5f640>, for reason: push standard 22:21:13.188303+0200 SpringBoard Removed: <FBUIApplicationSceneDeactivationAssertion: 0x283c9dfe0; reason: systemAnimation; all scene levels; hasPredicate: NO> standard 22:21:13.198299+0200 assertiond Submitting new job for "com.example.app" on behalf of <BKProcess: 0x141d15d50; SpringBoard; com.apple.springboard; pid: 48; agency: SystemShell; visibility: foreground; task: running> standard 22:21:13.198867+0200 SpringBoard Bootstrapping com.example.app with intent foreground-interactive standard 22:21:13.201136+0200 assertiond Submitted job with label: UIKitApplication:com.example.app[0x1d9f][58] standard 22:21:13.201244+0200 SpringBoard Icon touch canceled (tap gesture may still succeed): <private> fehler 22:21:13.201329+0200 SpringBoard [com.example.app] Bootstrap failed with error: <NSError: 0x283e4cd80; domain: BKSProcessErrorDomain; code: 1 (bootstrap-failed); reason: "Failed to start job"> fehler 22:21:13.201421+0200 SpringBoard Bootstrapping failed for <FBApplicationProcess: 0x15d13b3e0; com.example.app; pid: -1> with error: Error Domain=BKSProcessErrorDomain Code=1 "Unable to bootstrap process with bundleID com.example.app" UserInfo={NSLocalizedDescription=Unable to bootstrap process with bundleID com.example.app, BKSProcessExitReason=0, NSLocalizedFailureReason=Failed to start job, NSUnderlyingError=0x283e4c5d0 {Error Domain=NSPOSIXErrorDomain Code=3 "No such process" UserInfo={BKLaunchdOperation=launch_get_running_pid_4SB, NSLocalizedDescription=Unable to get pid for label UIKitApplication:com.example.app[0x1d9f][58], BKLaunchdJobLabel=UIKitApplication:com.example.app[0x1d9f][58], NSLocalizedFailureReason=No such process}}, BKSProcessJobLabel=UIKitApplication:com.example.app[0x1d9f][58], BSErrorCodeDescription=bootstrap-failed} standard 22:21:13.201507+0200 SpringBoard Adding: <FBApplicationProcess: 0x15d13b3e0; com.example.app; pid: -1> standard 22:21:13.201606+0200 SpringBoard <FBApplicationProcess: 0x15d13b3e0; com.example.app; pid: -1> exited. standard 22:21:13.202002+0200 assertiond Unable to get pid for 'UIKitApplication:com.example.app[0x1d9f][58]': No such process (3) fehler 22:21:13.202145+0200 assertiond Failed to start job with error <NSError: 0x141e1aba0; domain: NSPOSIXErrorDomain; code: 3; reason: "No such process"> { description = "Unable to get pid for label UIKitApplication:com.example.app[0x1d9f][58]"; failureReason = "No such process"; userInfo = { BKLaunchdJobLabel = UIKitApplication:com.example.app[0x1d9f][58]; BKLaunchdOperation = launch_get_running_pid_4SB; } } standard 22:21:13.202238+0200 assertiond Deleted job with label: UIKitApplication:com.example.app[0x1d9f][58] standard 22:21:13.202804+0200 SpringBoard Removing: <FBApplicationProcess: 0x15d13b3e0; com.example.app; pid: -1> standard 22:21:13.221231+0200 SpringBoard Application process state changed for com.example.app: <SBApplicationProcessState: 0x28336f0a0; pid: -1; taskState: Not Running; visibility: Unknown> standard 22:21:13.221566+0200 SpringBoard Process exited: <FBApplicationProcess: 0x15d13b3e0; com.example.app; pid: -1> -> <FBApplicationProcessExitContext: 0x283e37b10; exitReason: (none); terminationReason: (none)> { stateAtExit = <FBProcessState: 0x28337c760; pid: -1; taskState: Unknown; visibility: Unknown>; }

My app has the phrase GPT in it as it is an app that runs private open source offline AI models (for free) on the iPhone. The app is called LiberaGPT. I have released my first version without issue and it was distributed to the Mainland China store. I made some small updates including accessibility features etc and released my next version. The reviewer is now accusing my app of using OpenAI's ChatGPT even though they can see the source code and my app is entirely offline using local AI inference rather than cloud inference. It is now a back and forth of me explaining over and over that my app is nothing to do with ChatGPT that GPT is a term used in the field of AI to describe certain types of LLM's and is nothing to do with 'ChatGPT' which is a brand. It is like saying you can't say 'AI' because of 'OpenAI' this makes no sense. I am literally at my witts end as I've poured so much time and energy into developing this app and it is now available on the app store but they won't let me update it and are essentially gaslighting me by saying that the term GPT cannot be used because it belongs to ChatGPT when it doesn't. There are numerous apps (including my previous version which ironically is live in the store that contain GPT in the app name without issue. GPT stands for 'Generative Pre-trained Transformer' and is a description of a technology not a brand. Is there anything I can do? No matter how many times I clarify, provide evidence, try to explain my position, they keep just copy and pasting the same response over and over that my app cannot be published in mainland China as OpenAI's ChatGPT is banned there and that my app is using OpenAI's ChatGPT in the software WHICH IT ISNT!!! THERE IS NO CLOUD DATA CONNECTION. Any help would be greatly appreciated, hopefully I don't pull all my hair out. Thanks, Stephen

‌Using Xcode 26, the built package encounters device compatibility issues — while it installs successfully on supported iPhone devices, but it crashes immediately upon launch and cannot run normally.‌‌In previous versions of Xcode, the same "minimum deployment" setting in the project did not cause such compatibility issues.‌ The app built with Xcode 26 shows the following behavior when installed and tested on various devices:‌ iPhone6p iOS12.5.8 fails to run 2.iPhone6 iOS11 fails to run 3.Iphone6 iOS12.5.7 fails to run 4.iPhone7 iOS12.1.3 ok 5.iPhoneX iOS 12.2 ok 6.iphone6s plus iOS10.3.1 ok 7.iphoneXS. iOS 12.1.4 ok 8.iPhone11 iOS 13.6.1 ok 9.iPhone7. iOS 13.7 ok We have tested and found that an iPhone 6s Plus running iOS 10.3.1 can normally run the app. We would like to know whether apps built with Xcode 26 are inherently incompatible with iPhone 6 and older devices. Has Xcode 26’s underlying build environment removed full support for the A8 chip, resulting in binary files containing instructions or memory models that older devices cannot parse? ‌Looking forward to your reply‌.