Hello I need help with my Apple Developer account access. I am trying to run an iOS build through EAS/Expo, but the login to the Apple Developer Portal fails with this error: “Authentication with Apple Developer Portal failed! Apple Service Error -20209. This Apple Account has been locked for security reasons. Visit iForgot to reset your account.” I have already gone through the iForgot recovery flow and changed my password successfully. I can access my Apple account and Apple Developer site in the browser using the new password. Even after that, I still receive the same error when the build process tries to authenticate with the Apple Developer Portal. Could you please confirm whether there is still a security lock, restriction, or other issue on my Apple Developer account that is preventing access through developer services? Thank you.

I am currently developing an app for MacOS that needs to control HomeKit devices like lights. However, it seems like MacOS is supported on the official documentation, but not when I try to create an app ID on developer.apple.com. On the link https://developer.apple.com/apple-home/, MacOS is clearly showed as supported for MacOS. But when I try to create an app ID, it shows that it is only compatible for iOS, VisionOS and WatchOS. Could this be clarified? Best regards, orangeidle25

我是开发者，日常工作会同时打开大量终端（tmux、多项目、自动化脚本、node‑pty 等）。在这种现代开发场景下，511 的 PTY 上限明显过低，而且这个默认值对顶配机器（128GB RAM）和低配机器是一样的，没有随硬件规格调整，这不合理。 我尝试过使用 tmux control mode 来减少 PTY 占用，但它会导致终端输出对齐错乱，影响可用性，所以必须继续使用 PTY 模式。这意味着只要终端数量稍多，就很容易触及 511 上限，导致系统层面无法创建新终端，影响全局稳定性。 总结： 511 作为默认值在过去或许合理，但对现代开发者明显不足； 顶配机器和低配机器同一上限不合理； control mode 有输出对齐问题，无法作为现实替代方案。 谢谢！ Apple 支持社区工作人员

This is not exactly a feedback about the forums but I couldn't find a better location to ask this question. The macos release notes are hosted at developer.apple.com. For example, the macos 26.4 release note is here https://developer.apple.com/documentation/macos-release-notes/macos-26_4-release-notes. Would it be possible to include the release date in those release notes? Right now, it's hard to locate that information. It would also be useful to even include the sw_vers of that particular release in those release notes. For example: ProductName: macOS ProductVersion: 26.4 BuildVersion: 25E246 Having the sw_vers and the release date in the first few lines of the release note would be handy. The reason I went looking for the release date was because the corresponding sources for macos 26.4 hasn't yet been listed at https://opensource.apple.com/releases/. It usually takes a few days for that to happen, so I wanted to see how long it has been since 26.4 was released.

Hello, I am facing a critical issue where the Family Controls (Distribution) entitlement is not being applied to my app extensions, despite the main app ID being approved. Main App ID: com.hayashikento.focuspact (Approved on March 13) Extension ID 1: com.hayashikento.focuspact.ShieldActionExtension (Pending/Not visible) Extension ID 2: com.hayashikento.focuspact.ShieldConfigurationExtension (Pending/Not visible) I have submitted requests multiple times, but the entitlement does not appear in the "Capability Requests" for these extensions in the Certificates, Identifiers & Profiles portal. Furthermore, I am unable to contact Developer Support because the "Contact Us" form on the developer website consistently shows a "Request error" or freezes on the submission page. Since I am completely blocked from TestFlight distribution, could someone from Apple please look into my account (Team ID: UHG4J7F7NH) and manually sync these entitlements? Thank you for your help.

Hi, We are trying to integrate Metric Kit into our MacOS Application. Our application is a background process. We are interested in getting CPU and Memory metrics for our process. MXMetricPayload is the one we are looking at. We tried to integrate metric Kit and left the background app for 24 hours, we did not get any callback. So, does metric kit work for background app in MacOS? Also does it for Network Extension?

The assets in the Asset.xcasset lesser than the asset in the Assets.car file. Because of this the iPA file size increased three times as Assets.car file inside the iPA increased. Why do the asset file size increased enormously. How do we prevent this ? I used Version 26.2 (17C52).

Hello there everyone. I've got numerous support projects using old school development. Things from Objective-C to RxSwift and UIKit. I've tried the LLM/Agents and they just destroy the codebase over time, so I have given up. The final straw was trying to get it to fix a POSTCODE validation issue which was using some novel ways to provide validation in place using RxSwift. Has anyone had any luck with these LLMs on Legacy codebases? Would love to hear tips.

Starting yesterday, the API is returning 302 Moved Temporarily" redirecting the API to Location: https://developer.apple.com/weatherkit/ Is this happening for anyone else? This is incorrect, it should be giving an API JSON response as specified by: https://developer.apple.com/documentation/weatherkitrestapi/get-api-v1-weather-_language_-_latitude_-_longitude_

We're experiencing an issue where the CarPlay Simulator (from Apple Developer Additional Tools) stopped connecting to our iPhones as of March 4th, 2025. The simulator gets stuck indefinitely on "Connecting to phone" and never completes the pairing. Environment App: Oracle Field Service iOS app (with CarPlay support) Tool: CarPlay Simulator from Apple Developer Additional Tools (developer.apple.com/download/all/) Issue start date: Wednesday, March 4th, 2025 Tested on: Multiple Mac machines, multiple iPhones Multiple CarPlay Simulator versions tested What's happening The CarPlay Simulator launches but displays "Connecting to phone" indefinitely. It was working correctly prior to March 4th with no changes on our end. What still works CarPlay functions correctly when the same iPhone is connected to a real car, confirming the issue is specific to the simulator. Troubleshooting steps already attempted Reset permissions and re-added the simulator Forgot the simulator and re-paired it Changed the USB cable Tested on multiple Mac machines Tested on multiple iPhones Tried multiple versions of the CarPlay Simulator Confirmed no VPN is in use Confirmed with IT, no OS updates or enterprise restrictions were applied Questions Has anyone else experienced this since March 4th? Was there a change in CarPlay Simulator behavior or a requirement on the Apple side (certificate, entitlement, protocol) around that date? Is there a known workaround or fix?

Device: iPhone 13 OS Version: iOS 26.4, iOS 26.5 Summary: The Settings app crashes when accessing the Sandbox account management screen in Developer Settings while the device is offline. Steps to Reproduce: Enable Developer Mode on the device Disconnect from the internet (Wi-Fi and cellular off) Go to Settings → Developer Ensure a Sandbox account is signed in Tap on "Sandbox" Tap on "Manage" Expected Result: The system should either: Open the Sandbox management screen, or Show an error indicating no internet connection Actual Result: The Settings app crashes immediately after tapping "Manage". Reproducibility: Always (100%) when offline Additional Notes: Issue observed on iOS 26.4 and iOS 26.5 Does not occur on iOS 18 May also be present in other iOS 26.x versions Does not occur when the device has an active internet connection

Hello, From what I have heard, macOS will soon phase out Rosetta. I was wondering if Rosetta will still be available to install separately (instead of being preinstalled). I don't use Rosetta to run applications, because all the applications I use are ARM. However, for my YouTube channel, I often use the -arch x86_64 flag with clang. I do this so I can show the result from objdump and teach x86_64 Assembly, while also running the program through Rosetta. This may be a very niche use case, however I was still curious. Thank you!

pkgbuild on Tahoe (26.3.1) fails to build packages if any directory name contains non-ascii characters. pkgbuild is able to build successfully with the same source data on previous versions on macOS, so this is a regression and prevents us from build able to build our products on macOS 26. Example that demonstrates the issue: mkdir -p MyAppData/Taishōgoto echo "Testing" >> MyAppData/Taishōgoto/Content.txt pkgbuild --identifier com.example.MyAppData --install-location '/Library/Application Support/MyAppData' --root MyAppData myappdata.pkg Error messages: parent directory ./Taishōgoto does not exist pkgbuild: error: Cannot write package to "myappdata.pkg". (The file “package.bom” couldn’t be saved in the folder “NSIRD_pkgbuild_52fPuN”.) I have submitted this via Feedback Assistant (FB22312299). I have not found a workaround. Tried copying pkgbuild from Sequoia but the problem persisted, probably because the buggy code is in PackageKit rather than the tool itself.

Hi, Some crashes downloaded from TestFlight aren't symbolicated by Xcode and I don't know why, here's an example: Although all uploaded builds contain debug symbols (Symbols directory with .symbols files) and other crashlogs in the same version are symbolicated just fine (also visible on the above SS). I have access only to the .symbols files but not to the original dSYMs and I wonder how to perform symbolication manually. I tried pointing atos and symbolicatecrash utilities to respective .symbols file, but they are unable to work with it. I'm sure it's possible as TestFlight symbolicates crashlogs using only .symbols files somehow. Could you give a hint?

Hello, I was told from Developer engineers to post an Xcode issue on Feedback Assistant. It has been 6 weeks and I have yet to receive a single reply or acknowledgement on my feedback post. I would just like to at least get some sort of acknowledgement from Feedback Assistant that my post is being tracked or if a resolution is in work please. Here's the post: https://feedbackassistant.apple.com/feedback/21824703

Hi, Problem When playing videos on the Developer app on the Mac, there is no full screen button for the video. So it is not possible to play the video in full screen. Note I am not referring to the app going into full screen, the issue is with there is no option to play the video in full screen. Environment OS: macOS 26.2 (25C56) Developer app: Version 10.8.3 (1083.3.1) Feedback FB21343934 Recording Question Are others also facing this issue? Is there a workaround? Suggestion This seems to be recurring problem that seems get broken with app / OS releases. Please write some UI tests to ensure the full screen button is present. Would really appreciate if this gets fixed.

A user of my app sent me a crash report. I have never seen one like this before. All of my app's symbols are replaced with three question marks (???) Thread 0 Crashed:: Dispatch queue: com.apple.main-thread 0 ??? 0x10844eb40 ??? 1 CoreFoundation 0x7ff80f155518 __CFNOTIFICATIONCENTER_IS_CALLING_OUT_TO_AN_OBSERVER__ + 137 and the binary image as 0x0 - 0xffffffffffffffff ??? (*) <00000000-0000-0000-0000-000000000000> ??? so I cannot find out where exactly the crash happened. What can cause this kind of crash report and can I do anything with it? crash.ips

As it has already been reported elsewehere, I also face the problem of endless waiting time for my submissions to be notarized. This prevents me from shipping a new release. A waiting/processing time of multiple days is simply unacceptable. I kindly request to fix this.

I used to develop iPhone apps about a decade ago and am now back at it with an iPhone and companion Apple Watch app. Why does it suck so bad? I a must be doing something wrong, but what I am doing is out of the box. The majority of the time when I go to build on the watch I get: Previous preparation error: A connection to this device could not be established.; Timed out while attempting to establish tunnel using negotiated network parameters. Which I then first try to force quit the app on the watch and if that does not work, reboot the watch (which is pretty ridiculous). I tried Gemini and it gave me the following explanation: This is arguably the single most frustrating error in the entire watchOS development ecosystem. As an expert, I can tell you that you are not doing anything wrong; you are fighting a fragile architecture. Here is the technical breakdown of why this happens and a workflow to mitigate it without constant reboots. The Technical "Why" This error message reveals that the issue lies in the CoreDevice (and formerly usbmuxd) infrastructure, specifically in the secure transport layer. The "Tunnel" Failure: Xcode attempts to establish a secure, encrypted tunnel (DTXConnection) to the Apple Watch to push the debugger and the app binary. Unlike the iPhone, which can sustain a high-bandwidth connection easily, the Watch aggressively manages its radios (Bluetooth vs. WiFi vs. AWDL) to save battery. The "Handshake" Timeout: If the Watch is on Bluetooth (Low Energy) when Xcode initiates the tunnel, the bandwidth is insufficient. The system tries to escalate the connection to WiFi (or Apple Wireless Direct Link). If this negotiation takes even a few milliseconds too long—due to 2.4GHz interference, router mDNS configuration, or the Watch CPU being throttled—the handshake times out. The "Previous Preparation Error": This is the insidious part. Once the handshake fails once, Xcode’s device service caches that failure state for the device UUID. It marks the device as "unreachable" to prevent the IDE from hanging indefinitely on subsequent tries. Why you see it constantly: You aren't actually triggering a new connection attempt; you are hitting the cached "failed" state immediately. Unfortunately, the solutions it gives me are: The "Wired Proxy" Method (Most Reliable) This is the gold standard for watchOS debugging. Do not rely on "Connect via Network" for the Watch directly if you can avoid it. Disable WiFi on your Mac (temporarily) or ensure the Mac and iPhone are on the exact same SSID. Plug your iPhone into the Mac via USB. Ensure the Watch is paired to that iPhone. Result: Xcode will tunnel the instructions through the USB connection to the Phone, and the Phone acts as a high-bandwidth proxy to the Watch. This eliminates the "Mac-to-Watch" WiFi negotiation failure point. Do you hit this regularly? What do you do to make for a smooth development and deployment process? Or is it really this fragile? Thanks for any help! Bryan

Objective: Downloading and running an old Swift iOS App on iPhone 5s with iOS 12.5.8. Development System and Tools: Apple macBook, M4 Pro, running macOS Tahoe 26.3.1 (25D2128). Xcode Version 26.3 (17C529)