General: Forums subtopic: App & System Services > Networking TN3151 Choosing the right networking API Networking Overview document — Despite the fact that this is in the archive, this is still really useful. TLS for App Developers forums post Choosing a Network Debugging Tool documentation WWDC 2019 Session 712 Advances in Networking, Part 1 — This explains the concept of constrained networking, which is Apple’s preferred solution to questions like How do I check whether I’m on Wi-Fi? TN3135 Low-level networking on watchOS TN3179 Understanding local network privacy Adapt to changing network conditions tech talk Understanding Also-Ran Connections forums post Extra-ordinary Networking forums post Foundation networking: Forums tags: Foundation, CFNetwork URL Loading System documentation — NSURLSession, or URLSession in Swift, is the recommended API for HTTP[S] on Apple platforms. Moving to Fewer, Larger Transfers forums post Testing Background Session Code forums post Network framework: Forums tag: Network Network framework documentation — Network framework is the recommended API for TCP, UDP, and QUIC on Apple platforms. Building a custom peer-to-peer protocol sample code (aka TicTacToe) Implementing netcat with Network Framework sample code (aka nwcat) Configuring a Wi-Fi accessory to join a network sample code Moving from Multipeer Connectivity to Network Framework forums post NWEndpoint History and Advice forums post Wi-Fi (general): How to modernize your captive network developer news post Wi-Fi Fundamentals forums post Filing a Wi-Fi Bug Report forums post Working with a Wi-Fi Accessory forums post — This is part of the Extra-ordinary Networking series. Wi-Fi (iOS): TN3111 iOS Wi-Fi API overview technote Wi-Fi Aware framework documentation WirelessInsights framework documentation iOS Network Signal Strength forums post Network Extension Resources Wi-Fi on macOS: Forums tag: Core WLAN Core WLAN framework documentation Secure networking: Forums tags: Security Apple Platform Security support document Preventing Insecure Network Connections documentation — This is all about App Transport Security (ATS). WWDC 2017 Session 701 Your Apps and Evolving Network Security Standards [1] — This is generally interesting, but the section starting at 17:40 is, AFAIK, the best information from Apple about how certificate revocation works on modern systems. Available trusted root certificates for Apple operating systems support article Requirements for trusted certificates in iOS 13 and macOS 10.15 support article About upcoming limits on trusted certificates support article Apple’s Certificate Transparency policy support article What’s new for enterprise in iOS 18 support article — This discusses new key usage requirements. Technote 2232 HTTPS Server Trust Evaluation Technote 2326 Creating Certificates for TLS Testing QA1948 HTTPS and Test Servers Miscellaneous: More network-related forums tags: 5G, QUIC, Bonjour On FTP forums post Using the Multicast Networking Additional Capability forums post Investigating Network Latency Problems forums post Share and Enjoy — Quinn “The Eskimo!” @ Developer Technical Support @ Apple let myEmail = "eskimo" + "1" + "@" + "apple.com" [1] This video is no longer available from Apple, but the URL should help you locate other sources of this info.

I'm building a macOS network monitor using NEFilterDataProvider as a system extension, distributed with Developer ID signing. On macOS 26.3 (Tahoe), sysextd consistently rejects the activation request with "no policy, cannot allow apps outside /Applications" — despite the app being in /Applications and passing every verification check. I'm aware of the known Xcode NE signing bug (r. 108838909) and have followed the manual signing process from Exporting a Developer ID Network Extension. I've also tried both xcodebuild build and xcodebuild archive workflows — identical failure. Environment macOS 26.3 (25D125), SIP enabled Xcode 26.3 (17C529) Hardware Apple M2 Pro Certificate Developer ID Application (issued Jan 30, 2026 — 27 days old) MDM/Profiles None installed Signing & Verification (all pass) $ spctl -a -vv /Applications/Chakshu.app /Applications/Chakshu.app: accepted source=Notarized Developer ID origin=Developer ID Application: ROBIN SHARMA (R65679C4F3) $ codesign --verify --deep --strict -vv /Applications/Chakshu.app /Applications/Chakshu.app: valid on disk /Applications/Chakshu.app: satisfies its Designated Requirement $ xcrun stapler validate /Applications/Chakshu.app The validate action worked! App signing: Authority=Developer ID Application: ROBIN SHARMA (R65679C4F3) Authority=Developer ID Certification Authority Authority=Apple Root CA TeamIdentifier=R65679C4F3 Runtime Version=26.2.0 Notarization Ticket=stapled App entitlements: com.apple.application-identifier = R65679C4F3.dev.indrasvat.chakshu com.apple.developer.team-identifier = R65679C4F3 com.apple.developer.system-extension.install = true com.apple.developer.networking.networkextension = [content-filter-provider-systemextension] keychain-access-groups = [R65679C4F3.*] Extension signing: Same Developer ID authority, same team, same timestamp. Extension entitlements match (minus system-extension.install). Developer ID provisioning profiles are embedded in both app and extension. What sysextd logs Captured Feb 26, 2026 from log stream --predicate 'process == "sysextd"': sysextd [com.apple.sx:XPC] client activation request for dev.indrasvat.chakshu.filter sysextd attempting to realize extension with identifier dev.indrasvat.chakshu.filter sysextd (Security) SecKeyVerifySignature ← pass (×2) sysextd (Security) SecTrustEvaluateIfNecessary ← pass (×2) sysextd [com.apple.xpc:connection] activating connection: name=com.apple.CodeSigningHelper sysextd [com.apple.xpc:connection] invalidated after the last release sysextd no policy, cannot allow apps outside /Applications sysextd [com.apple.sx:XPC] client connection invalidated Signature and trust evaluation pass. CodeSigningHelper completes. Then the policy check fails. The app receives OSSystemExtensionError code 4 (extensionNotFound). What I've tried and ruled out Build process: Approach Result xcodebuild build -configuration Release + manual re-sign Same failure xcodebuild archive + export from archive + manual re-sign (per thread/737894) Same failure Minimal hand-crafted Xcode project (no xcodegen, trivial code) Same failure Both workflows follow Quinn's process exactly: build with Apple Development → copy app → embed Developer ID provisioning profiles → re-sign inside-out (extension first, then app) with -systemextension suffix entitlements → notarize → staple → install to /Applications. System-level checks: Rebooting — no change Killing sysextd — no change Removing com.apple.quarantine xattr — no change chown root:wheel on app bundle — no change lsregister -r (reset Launch Services) — no change Waiting 27 days for certificate propagation — no change Reinstalling via Finder drag-to-Applications — no change No MDM or configuration profiles installed /Library/SystemExtensions/db.plist shows extensionPolicies: [] (empty) Key observation Pre-existing network extensions activated before macOS 26 work fine on this machine. For example, Tailscale's NEPacketTunnelProvider shows state: activated_enabled in the system extensions database — it was activated on a prior macOS version and is still running. Only new system extension activations fail. I've seen similar Tahoe-specific reports from LuLu (same NEFilterDataProvider type, Developer ID distribution): LuLu #825 LuLu #831 Questions Is this a known regression in macOS 26's sysextd policy evaluation for new Developer ID system extension activations? sysextd's policy check fails after all signature and trust evaluation succeeds. Is there a separate trust/policy path that sysextd consults beyond what spctl, codesign, and CodeSigningHelper verify? Is there anything else I should be checking? I have a sysdiagnose captured immediately after the failure, a minimal reproducer project, and full raw sysextd logs available on request.

Summary On macOS 26.4.1 (25E253), iCloud Drive file uploads can enter a silent deadlock where every upload attempt fails at the transport layer. No error is surfaced anywhere — not in Finder, not in System Settings, not in the iCloud status panel. The upload queue simply stops. Other iCloud services (Photos, Mail, App Store) continue to work normally through the same networking infrastructure at the same time. Root Cause The issue is a stale HTTP/3 (QUIC) session cached in the user-level nsurlsessiond process's BackgroundConnectionPool. The deadlock cycle: cloudd requests an upload to the GCS storage endpoint nsurlsessiond provides the cached (broken) HTTP/3 session The TLS handshake succeeds, but the body upload dies mid-transfer (err=T, requestDuration=-1.000, responseHeaderBytes=0) cloudd retries with a new connectionUUID — but nsurlsessiond still routes through the same poisoned QUIC session This repeats indefinitely Killing cloudd alone does not help — nsurlsessiond retains the poisoned pool. Only killing both the user-level cloudd and nsurlsessiond clears the pool and forces a fresh protocol negotiation. The Smoking Gun After killing both daemons, the system falls back to HTTP/1.1 for the stuck uploads — and they complete instantly: Before Kill After Kill Protocol h3 (QUIC) http/1.1 (TCP) Largest upload Failed at partial offsets 26 MB in 1.6 seconds Server response 0 bytes 596 bytes (normal) Same endpoint, same files, same network interface (en5), same power state. The only change was the protocol negotiation after a fresh nsurlsessiond. Reproduction Reproduced 3 times on April 11, 2026 using a standardized set of 8 test files (8 bytes to 20 MB) in a non-shared iCloud Drive folder. Each run showed the identical pattern: Small files (<100 KB) squeeze through before the QUIC session stalls Larger files trigger the deadlock every time 5–6 retries with fresh connectionUUIDs, all failing over protocol=h3 After kill cloudd + nsurlsessiond: immediate flush via protocol=http/1.1 An automated evidence-collection script (collect_h3_deadlock_evidence.sh) captures paired before-kill / after-kill logs. Included in the Feedback report. Symptom Check (for others hitting this) /usr/bin/log show --predicate 'process == "cloudd"' --last 5m 2>&1 \ | grep "putContainer.*err=T.*requestDuration=-1.000.*protocol=h3" | wc -l Output > 0 = this deadlock. Output = 0 = different issue. Recovery (one-liner) kill $(ps -axo user,pid,command | awk -v u="$USER" \ '($1==u && /CloudKitDaemon.framework.*cloudd/ && !/--system/) \ || ($1==u && /\/usr\/libexec\/nsurlsessiond/ && !/--privileged/) \ {print $2}') Both daemons respawn within 1–2 seconds. Do not use killall nsurlsessiond — it would also kill the privileged system instance. What was ruled out Network connectivity (Photos uploaded 8 MB through the same pool simultaneously) iCloud account (metadata operations succeeding, only body uploads failing) File type/content (random data, correlation is with size, not type) Storage quota (1.65 TB free) CFNetworkHTTP3Enabled=false (key is ineffective in 26.4.1) Suggested fixes (from the Feedback report) CFNetwork: Invalidate the QUIC session after N consecutive requestDuration=-1.000 failures CloudKit/NSURLSession: Expose a pool invalidation API like [NSURLSession invalidatePoolEntryForEndpoint:] cloudd: Self-healing retry — create a fresh NSURLSession after M consecutive deadlock-signature failures Finder: At minimum, surface the stuck state to the user instead of failing silently Filed as FB22476701 — includes full reproduction timelines, request/connection UUIDs, sysdiagnose, and a 12-page investigation PDF with architecture diagrams and protocol comparison tables. If you're experiencing the same issue, please file a duplicate referencing FB22476701 — Apple prioritizes by duplicate count. System MacBook Air, macOS 26.4.1 (25E253) iCloud Drive with Desktop & Documents sync en0 (WLAN) + en5 (USB-LAN via Studio Display)

I'm developing a spatial tracking app using a Qorvo DWM3001CDK (MFi-certified UWB accessory) with NINearbyAccessoryConfiguration. On iPhone 15 (iOS 26.3.1, second-generation UWB chip): supportsDirectionMeasurement = false NINearbyObject.direction is always nil NINearbyObject.distance works correctly (~63Hz) Camera Assistance (isCameraAssistanceEnabled=true) provides horizontalAngle only after ARKit convergence (~10s), and only while the phone is moving On iPhone 12/13 (first-generation UWB chip), direction works correctly with the same accessory. My questions: Is the removal of instantaneous direction measurement for third-party accessories on second-generation UWB devices intentional? Or is this a regression that will be fixed in a future iOS update? If intentional, what is the recommended approach for apps that need real-time direction to a UWB accessory on iPhone 15/16? Camera Assistance requires phone movement and only works with stationary targets, which doesn't work for our use case (tracking a moving object with the phone mounted on a gimbal). Are there any plans to provide instantaneous direction measurement for NINearbyAccessoryConfiguration on second-generation UWB devices? Environment: iPhone 15, iOS 26.3.1 Qorvo DWM3001CDK (FiRa + MFi certified) NINearbyAccessoryConfiguration with isCameraAssistanceEnabled=true Shared ARSession Thank you.

Hello, I've run into an issue where AssetPacks being served locally are downloading but unable to complete. try await AssetPackManager .shared .ensureLocalAvailability(of: assetPack) This method is called but never appears to complete. Even 10 minutes after the download is finished. <NSProgress: 0x10fb4fc80> : Parent: 0x0 (portion: 0) / Fraction completed: 1.0000 / Completed: 2462633379 of 2462633379 This however does not appear to be an issue in production, as the method completes 30-60 seconds after the download has finished. Issue happens across multiple devices running 26.4.1

Hello, We have a security solution which intercepts network traffic for inspection using a combination of Transparent Proxy Provider and Content filter. Lately we are seeing reports from the market that on M5 Macbooks and A18 Neos the system will kernel panic using our solution, even though it never happens on M1-M4 and no significant code changes were made in the mean time. All crashes seem to be related to an internal double free in the kernel: panic(cpu 0 caller 0xfffffe003bb68224): skmem_slab_free_locked: attempt to free invalid or already-freed obj 0xf2fffe29e15f2400 on skm 0xf6fffe2518aaa200 @skmem_slab.c:646 Debugger message: panic Memory ID: 0xff OS release type: User OS version: 25D2128 Kernel version: Darwin Kernel Version 25.3.0: Wed Jan 28 20:54:38 PST 2026; root:xnu-12377.91.3~2/RELEASE_ARM64_T6050 Additionally, from further log inspection, before panics we find some weird kernel messages which seem to be related to some DMA operations gone wrong in the network driver on some machines: 2026-03-30 14:11:21.779124+0300 0x30f2 Default 0x0 873 0 Arc: (Network) [com.apple.network:connection] [C9.1.1.1 IPv4#e5b4bb04:443 in_progress socket-flow (satisfied (Path is satisfied), interface: en0[802.11], ipv4, ipv6, dns, uses wifi, flow divert agg: 1, LQM: good)] event: flow:start_connect @0.075s 2026-03-30 14:11:21.780015+0300 0x1894 Default 0x0 0 0 kernel: (402262746): No more valid control units, disabling flow divert 2026-03-30 14:11:21.780017+0300 0x1894 Default 0x0 0 0 kernel: (402262746): Skipped all flow divert services, disabling flow divert 2026-03-30 14:11:21.780102+0300 0x1894 Default 0x0 0 0 kernel: SK[2]: flow_entry_alloc fe "0 proc kernel_task(0)Arc nx_port 1 flow_uuid D46E230E-B826-4E0A-8C59-4C4C8BF6AA60 flags 0x14120<CONNECTED,QOS_MARKING,EXT_PORT,EXT_FLOWID> ipver=4,src=<IPv4-redacted>.49703,dst=<IPv4-redacted>.443,proto=0x06 mask=0x0000003f,hash=0x04e0a750 tp_proto=0x06" 2026-03-30 14:11:21.780194+0300 0x1894 Default 0x0 0 0 kernel: tcp connect outgoing: [<IPv4-redacted>:49703<-><IPv4-redacted>:443] interface: en0 (skipped: 0) so_gencnt: 14634 t_state: SYN_SENT process: Arc:873 SYN in/out: 0/1 bytes in/out: 0/0 pkts in/out: 0/0 rtt: 0.0 ms rttvar: 250.0 ms base_rtt: 0 ms error: 0 so_error: 0 svc/tc: 0 flow: 0x9878386f 2026-03-30 14:11:21.934431+0300 0xed Default 0x0 0 0 kernel: Hit error condition (not panicking as we're in error handler): t8110dart <private> (dart-apcie0): invalid SID 2 TTBR access: level 1 table_index 0 page_offset 0x2 2026-03-30 14:11:21.934432+0300 0xed Default 0x0 0 0 kernel: [ 73.511690]: arm_cpu_init(): cpu 6 online 2026-03-30 14:11:21.934441+0300 0xed Default 0x0 0 0 kernel: [ 73.511696]: arm_cpu_init(): cpu 9 online 2026-03-30 14:11:21.934441+0300 0xed Default 0x0 0 0 kernel: [ 73.569033]: arm_cpu_init(): cpu 6 online 2026-03-30 14:11:21.934441+0300 0xed Default 0x0 0 0 kernel: [ 73.569038]: arm_cpu_init(): cpu 9 online 2026-03-30 14:11:21.934442+0300 0xed Default 0x0 0 0 kernel: [ 73.577453]: arm_cpu_init(): cpu 7 online 2026-03-30 14:11:21.934442+0300 0xed Default 0x0 0 0 kernel: [ 73.586328]: arm_cpu_init(): cpu 5 online 2026-03-30 14:11:21.934442+0300 0xed Default 0x0 0 0 kernel: [ 73.586332]: arm_cpu_init(): cpu 8 online 2026-03-30 14:11:21.934442+0300 0xed Default 0x0 0 0 kernel: [ 73.621392]: (dart-apcie0) AppleT8110DART::_fatalException: dart-apcie0 (<ptr>): DART DART SID exception ERROR_SID_SUMMARY 0x00003000 ERROR_ADDRESS 0x0000000000009800 2026-03-30 14:11:21.934443+0300 0xed Default 0x0 0 0 kernel: [ 73.621397]: Hit error condition (not panicking as we're in error handler): 2026-03-30 14:11:21.934443+0300 0xed Default 0x0 0 0 kernel: t8110dart <ptr> (dart-apcie0): invalid SID 2 TTBR access: level 1 table_index 0 page_offset 0x2Expect a `deadbeef` in the error messages below 2026-03-30 14:11:21.934452+0300 0xed Default 0x0 0 0 kernel: Expect a `deadbeef` in the error messages below 2026-03-30 14:11:21.934456+0300 0xed Default 0x0 0 0 kernel: (AppleEmbeddedPCIE) apcie[0:centauri-control]::_dartErrorHandler() InvalidPTE caused by read from address 0x9800 by SID 2 (RID 2:0:1/useCount 1/device <private>) 2026-03-30 14:11:21.934469+0300 0xed Default 0x0 0 0 kernel: (AppleT8110DART) Ignored dart-apcie0 (0xfbfffe18820b0000): DART(DART) error: SID 2 PTE invalid exception on read of DVA 0x9800 (SEG 0 PTE 0x2) ERROR_SID_SUMMARY 0x00003000 TIME 0x11242d43fd TTE 0xffffffffffffffff AXI_ID 0 We do not have any correlation between machines, usage pattern or installed applications. Uninstalling the network protection features seem to largely fix the issues, even though we have heard of crashes happening even in safe mode or with our network extension disabled from system settings. We weren't able to reproduce internally and it seems to happen completely random on client machines, but often enough to be disrupting. Can you tell us please if this is a known problem and if there's a workaround or what can we do to narrow it down? Thanks.

https://developer.apple.com/documentation/corewlan/cweventtype/linkqualitydidchange As per the documentation core WLAN will send notification when there is a change in RSSI. I did not receive any notification when there is a change in RSSI.

Summary I'm implementing NEURLFilter with the com.apple.developer.networking.networkextension.url-filter-provider entitlement for a system-wide URL filtering feature. The feature works perfectly in development-signed builds (connecting successfully to my PIR server over extended testing) but every production-signed build fails before any network call is made. NEURLFilterManager reports .serverSetupIncomplete (code 9). After installing the NetworkExtension debug profile, the unredacted com.apple.CipherML logs reveal the cause: no privacy proxy is provisioned for this bundle identifier, and the connection is configured proxy fail closed. Environment iOS 26 Entitlement: com.apple.developer.networking.networkextension.url-filter-provider Extension point: com.apple.networkextension.url-filter-control PIR server configured via NEURLFilterManager.setConfiguration(...) Privacy Pass issuer configured Dev-signed builds: working correctly, connecting to the PIR server Production-signed builds (both TestFlight and distribution): failing identically The Error Chain Surfaced to the app via NEURLFilterManager.lastDisconnectError: NEURLFilterManager.Error.serverSetupIncomplete (code 9) ← NEAgentURLFilterErrorDomain Code 3 ← com.apple.CipherML Code 1100 "Unable to query status" ← com.apple.CipherML Code 1800 (error details were logged and redacted) After installing the VPN (NetworkExtension) debug profile, the unredacted com.apple.CipherML subsystem shows: queryStatus(for:options:) threw an error: Error Domain=NSURLErrorDomain Code=-1009 "The Internet connection appears to be offline." UserInfo={ _NSURLErrorNWPathKey = satisfied (Path is satisfied), interface: en0[802.11], ipv4, dns, uses wifi, LQM: good, NSErrorFailingURLKey = https://<my-pir-server>/config, NSUnderlyingError = { Error Domain=NSPOSIXErrorDomain Code=50 "Network is down" }, _NSURLErrorPrivacyProxyFailureKey = true, NSLocalizedDescription = "The Internet connection appears to be offline." } The critical diagnostic line in the com.apple.network subsystem is: nw_endpoint_proxy_handler_should_use_proxy Proxies not present, but required to fail closed And the connection setup shows the proxy fail closed flag is mandatory for the connection: [C... ... Hostname#...:443 quic, bundle id: <my-bundle-id>, attribution: developer, using ephemeral configuration, context: NWURLSession (sensitive), proxy fail closed] start The network path itself is healthy (Wi-Fi good, DNS resolves correctly), but the connection is explicitly configured to fail closed if no proxy is present, and no proxy is provisioned for this bundle identifier. The entire failure happens in approximately 18 ms, far too fast for any network round-trip, confirming no traffic ever leaves the device. What I've Verified The entitlement is present in the distribution build The NEURLFilterControlProvider extension loads and returns a valid Bloom filter prefilter (with a tag that round-trips correctly between extension and framework) NEURLFilterManager.setConfiguration(pirServerURL:pirPrivacyPassIssuerURL:pirAuthenticationToken:controlProviderBundleIdentifier:) accepts all four parameters without error Development-signed builds of the same bundle identifier connect successfully to the same PIR server On production-signed builds, zero requests reach the PIR server — failure is purely client-side, before any network activity The Question How does the OHTTP privacy proxy get provisioned for a bundle identifier so that production builds can successfully use NEURLFilter? Specifically: Is there a Capability Request form I need to submit for url-filter-provider? I cannot find one in the Capability Requests section of my developer portal. Should I be running my own OHTTP gateway (for example using swift-nio-oblivious-http), and if so, does Apple then need to provision routing from their OHTTP relay to my gateway URL? Is the OHTTP relay path meant to be automatic once the entitlement is active, and if so, is there a specific activation step I'm missing? Is there any way to verify the current provisioning state for a specific bundle identifier from the developer portal? I can provide the full sysdiagnose and unredacted bundle/server details privately to an Apple engineer if that would help diagnose. I'd prefer to keep them out of a public post. Thanks!

We observed intermittent failures when iOS devices repeatedly attempt to connect to an AP via NEHotspotConfiguration. When sniffing the packets, most failures occur before the WPA 4‑way handshake, with a smaller number happening during the handshake itself. SSID and Password were verified to be correct. Root Causes Association fails before handshake (primary issue) iOS often fails at the association phase (Apple80211AssociateAsync errors such as -3905 / -3940). These attempts never reach the WPA 4‑way handshake. iOS auto‑join suppression amplifies the problem After a single association failure, iOS marks the network as failed and blocks retry attempts. Subsequent attempts are rejected by policy (Already failed to auto-join known network profile) without new radio activity. This makes one real failure appear as many repeated failures. 4‑Way handshake failures (secondary) In some cases, association succeeds but the connection drops during WPA setup (Join Failure(6)). The error (if received, not always) is Internal Error - 8. Could we inquire on what might be the best steps to resolve this issue?

Hello! I have an accessory, which is paired already with an iPhone, and am attempting to upgrade its SSID permission to Wi-Fi Aware. In ideal conditions, it works perfectly. However, if I dismiss the picker at the time of pin-code entry, I am unable to re-initialize an upgrade authorization picker. Even though the authorization is not completed a WAPairedDeviceID is assigned to the object of 18446744073709551615. Any subsequent attempts to start the picker up again spits out when treated as a failure serves: [ERROR] updateAuthorization error=Error Domain=ASErrorDomain Code=450 "No new updates detected from existing accessory descriptor." Attempting with a mutated descriptor serves: [ERROR] updateAuthorization error=Error Domain=ASErrorDomain Code=450 "Accessory cannot be upgraded with given descriptor." If I try using failAuthorization i get a 550 "Invalid State" error and furthermore if I try finishAuthorization to attempt to clear the descriptor/paired device ID it fails to clear it. If I could be pointed to the intended behavior on how to handle this, or this can be acknowledged as a bug, that would be incredibly appreciated. Thank you!

Hello, I have an app that is using iOS 26 Network Framework APIs. It is using QUIC, TLS 1.3 and Bonjour. For TLS I am using a PKCS#12 identity. All works well and as expected if the devices (iPhone with no cellular, iPhone with cellular, and iPad no cellular) are all on the same wifi network. If I turn off my router (ie no more wifi network) and leave on the wifi toggle on the iOS devices - only the non cellular iPhone and iPad are able to discovery and connect to each other. My iPhone with cellular is not able to. By sharing my logs with Cursor AI it was determined that the connection between the two problematic peers (iPad with no cellular and iPhone with cellular) never even makes it to the TLS step because I never see the logs where I print out the certs I compare. I tried doing "builder.requiredInterfaceType(.wifi)" but doing that blocked the two non cellular devices from working. I also tried "builder.prohibitedInterfaceTypes([.cellular])" but that also did not work. Is AWDL on it's way out? Should I focus my energy on Wi-Fi Aware? Regards, Captadoh

I'm developing a lighting control app for iOS that receives Art-Net (UDP port 6454) and sACN (UDP port 5568) packets from a lighting console and relays commands to BLE wristbands with LEDs. This is used in live event production — the participant locks their phone while in a show and expects lighting control to continue uninterrupted. The problem UDP receive stops reliably ~30 seconds after the screen locks. I understand this is by design - iOS suspends apps in the background. However, I'm trying to understand if any supported path exists for this use case. What I've already tried UIRequiresPersistentWiFi = true - helps with Wi-Fi association but doesn't prevent app suspension Silent AVAudioEngine loop with UIBackgroundModes: audio - keeps the app alive, works in testing, but risks App Store rejection and feels like an abuse of the audio background mode NWListener (Network framework) on the UDP port - same suspension behaviour Socket rebind on applicationWillEnterForeground - recovers after resume but doesn't prevent dropout What I'm asking Is there any supported background mode or entitlement for sustained UDP receive in a professional/enterprise context? (Similar to how VoIP apps get the voip background mode for sustained network activity.) Is the silent audio workaround considered acceptable for App Store distribution in a professional tools context, or will it be rejected? Is NEAppProxyProvider or another Network Extension a viable path, and if so does it require a special entitlement? Test project I have a minimal Xcode project (~130 lines) demonstrating the issue — NWListener on port 6454, packet counter, staleness timer, and silent audio toggle. I can share the test code. STEPS TO REPRODUCE In Xcode (one-time setup): Select the UDPBackgroundTest target → Signing & Capabilities → set your Team Plug in your iPhone → select it as the run destination Build & run — confirm packets appear on screen when you run 'send_test_udp.py' Lock the phone and observe the dropout Test: Open the app and run 'python3 send_test_udp.py 192.168.0.XXX' The app counts up the packages, they match the python output. 1 packet per second. lock screen & and wait 10 seconds unlock phone an see the numbers are 10 packets off

We use TeamCity as our Continuous Integration (CI) solution to build and run automated tests. These are integration tests executed through our 4D application, which is properly code‑signed and notarized. These CI machines are heavily used and build multiple versions per day, making them critical to our development workflow. However, we are experiencing an issue on some machines: after a certain period of time, network communication through our application stops working, while network communication remains fully functional when using third‑party tools (for example, LDAP clients). Based on our investigation, this issue appears to be related to Local Network Privacy management. We have followed the procedure described in Apple’s Technical Note: TN3179: Understanding local network privacy | Apple Developer Documentation to reset network authorizations, but this has not been sufficient to resolve the issue. In addition, our CI environment requires acknowledging a large number of Local Network access permission prompts. Given that these machines build multiple versions per day and are intended to run unattended, this is not practical in an automated CI context. We have around ten Macs dedicated to running these tests, and manually approving these pop‑ups is not a viable solution.

When using the official Wi-Fi Aware demo app on iOS, with the iOS device configured as a NAN Subscriber, after successfully establishing a peer-to-peer connection with another device via Wi-Fi Aware (NAN), the network path object nwPath.availableInterfaces does not list the nan0 virtual network interface. The nan0 interface is the dedicated NAN (Neighbor Aware Networking) interface used for Wi-Fi Aware data communication. Its absence from availableInterfaces prevents the app from correctly identifying/using the NAN data path, breaking expected Wi-Fi Aware data transmission logic. log: iOS works as subscriber: [onPathUpdate] newPath.availableInterfaces: ["en0"] iOS works as publisher: [onPathUpdate] newPath.availableInterfaces: ["nan0"]

Hello. There is a condition that two requests are executed from an iPhone to the application, and the same session must be maintained throughout the execution of these two requests. The application resides within AWS. AWS ALB offers a Sticky Session feature to maintain sessions; to use this feature, Sticky Session Cookies are utilized, and it seems that the iPhone must be able to set the cookie. I would like to know if the iPhone can accept cookies for Sticky Sessions. Has anyone experienced a similar situation before?

I’m building an app on macOS 26.4 with Xcode 26.4. When I build and run my app it started prompting me for network access, which it didn’t do before with Xcode 26. It did that repeatedly, and I had been approving the prompts and the app had been working. Now the app’s network features are not working, and I assume its because its being blocked by macOS, even though I accepted the network requests each time. In System Settings - Privacy and Security - Local Network, the app has many repeated entries, like 20, and all of them are turned on.

We have been testing several domains (including xiaohongshu.com, bilibili.com, douyin.com, and tls13.xargs.org) and have encountered a systemic issue related to Apple's Certificate Transparency (CT) policy enforcement on iOS 18. We would like to seek clarification from the Apple team. Observed Behavior: On iOS 18 devices where the CT log list (assetVersion) is at version ≤1006, Safari presents "This Connection Is Not Private" for the affected domains. NSURLSession returns error -1202 (NSURLErrorServerCertificateUntrusted), and SecTrust rejects the certificate chain entirely. Other domains whose certificates use 2026-series CT log servers connect normally on the same device. Key Affected User Pattern: The vast majority of affected devices are those upgraded directly from iOS 14 or iOS 15 to iOS 18, where the CT log list did not automatically update after the upgrade and remains stuck at version ≤1006. Brand-new devices and devices that have updated their CT list to version 1012 connect normally — confirmed through direct testing. This suggests the issue is not a bug in iOS 18 itself, but rather a failure to refresh the CT log list on older devices after a major OS upgrade, resulting in a low-… (truncated) Root Cause Analysis: The failing certificates embed SCTs from three CT log servers: Cloudflare Nimbus2027, Tiger2027h1, and Elephant2027h1. These servers were added to Apple's trusted CT log list between September and November 2025. Devices whose CT list is still at version ≤1006 do not include these servers, causing all SCTs to be deemed invalid and the certificate to be rejected. Questions: What triggers a CT log list update? Under what conditions does the Trusted Asset (CT log list) update on iOS devices? Is there an update mechanism independent of the system OTA? Why does upgrading from iOS 14/15 to iOS 18 appear to leave the CT list at an older version rather than refreshing it as part of the upgrade? Is Apple aware of this as a known issue? For devices that upgraded to iOS 18 from iOS 14/15 and whose CT list was not refreshed, while CAs are already using newly-trusted log servers — does Apple have an official recommendation or a fix planned? Is there a "safe use window" guidance for CAs? Does Apple communicate to CAs a recommended waiting period after a new CT log server is added to the trust list, before it should be used to issue certificates targeting iOS users? If not, are there plans to publish such guidance? CT list behavior across upgrade paths: Can Apple clarify whether devices upgrading from iOS 14/15 to iOS 18 receive a different CT list assetVersion compared to devices upgrading from iOS 16/17 or performing a clean install? Is there a patch or mechanism to ensure devices on older upgrade paths also receive timely CT list updates? Thank you for your attention. We look forward to a clear response.

Problem description Since macOS Sequoia, our users have experienced issues with multicast traffic in our macOS app. Regularly, the app starts but cannot receive multicast, or multicast eventually stops mid-execution. The app sometimes asks again for Local Network permission, while it was already allowed so. Several versions of our app on a single machine are sometimes (but not always) shown as different instances in the System Settings > Privacy & Security > Local Network list. And when several instances are shown in that list, disabling one disables all of them, but it does not actually forbids the app from receiving multicast traffic. All of those issues are experienced by an increasing number of users after they update their system from macOS 14 to macOS 15 or 26, and many of them have reported networking issues during production-critical moments. We haven't been able to find the root cause of those issues, so we built a simple test app, called "FM Mac App Test", that can reproduce multicast issues. This app creates a GCDAsyncUdpSocket socket to receive multicast packets from a piece of hardware we also develop, and displays a simple UI showing if such packets are received. The app is entitled with "Custom Network Protocol", is built against x86_64 and arm64, and is archived (signed and notarized). We can share the source code if requested. Out of the many issues our main app exhibits, the test app showcases some: The app asks several times for Local Network permission, even after being allowed so previously. After allowing the app's Local Network and rebooting the machine, the System Settings > Privacy & Security > Local Network does not show the app, and the app asks again for Local Network access. The app shows a different Local Network Usage Description than in the project's plist. Several versions of the app appear as different instances in the Privacy list, and behave strangely. Toggling on or off one instance toggles the others. Only one version of the app seems affected by the setting, the other versions always seem to have access to Local Network even when the toggle is set to off. We even did see messages from different app versions in different user accounts. This seems to contradicts Apple's documentation that states user accounts have independent Privacy settings. Can you help us understand what we are missing (in terms of build settings, entitlements, proper archiving...) so our app conforms to what macOS expects for proper Local Network behavior? Related material Local Network Privacy breaks Application: this issue seemed related to ours, but the fix was to ensure different versions of the app have different UUIDs. We ensured that ourselves, to no improvement. Local Network FAQ Technote TN3179 Steps to Reproduce Test App is developed on Xcode 15.4 (15F31d) on macOS 14.5 (23F79), and runs on macOS 26.0.1 (25A362). We can share the source code if requested. On a clean install of macOS Tahoe (our test setup used macOS 26.0.1 on a Mac mini M2 8GB), we upload the app (version 5.1). We run the app, make sure the selected NIC is the proper one, and open the multicast socket. The app asks us to allow Local Network, we allow it. The alert shows a different Local Network Usage Description than the one we set in our project's plist. The app properly shows packets are received from the console on our LAN. We check the list in System Settings > Privacy & Security > Local Network, it includes our app properly allowed. We then reboot the machine. After reboot, the same list does not show the app anymore. We run the app, it asks again about Local Network access (still with incorrect Usage Description). We allow it again, but no console packet is received yet. Only after closing and reopening the socket are the console packets received. After a 2nd reboot, the System Settings > Privacy & Security > Local Network list shows correctly the app. The app seems to now run fine. We then upload an updated version of the same app (5.2), also built and notarized. The 2nd version is simulating when we send different versions of our main app to our users. The updated version has a different UUID than the 1st version. The updated version also asks for Local Network access, this time with proper Usage Description. A 3rd updated version of the app (5.3, also with unique UUID) behaves the same. The System Settings > Privacy & Security > Local Network list shows three instances of the app. We toggle off one of the app, all of them toggle off. The 1st version of the app (5.1) does not have local network access anymore, but both 2nd and 3rd versions do, while their toggle button seems off. We toggle on one of the app, all of them toggle on. All 3 versions have local network access.

How do I make a basic request with URLSession? See https://stackoverflow.com/questions/30573898 for reference. Also https://developer.apple.com/documentation/ has details.

URLSession question

I haven’t been able to get this to work at any level! I’m running into multiple issues, any light shed on any of these would be nice: I can’t implement a bloom filter that produces the same output as can be found in the SimpleURLFilter sample project, after following the textual description of it that’s available in the documentation. No clue what my implementation is doing wrong, and because of the nature of hashing, there is no way to know. Specifically: The web is full of implementations of FNV-1a and MurmurHash3, and they all produce different hashes for the same input. Can we get the proper hashes for some sample strings, so we know which is the “correct” one? Similarly, different implementations use different encodings for the strings to hash. Which should we use here? The formulas for numberOfBits and numberOfHashes give Doubles and assign them to Ints. It seems we should do this conversing by rounding them, is this correct? Can we get a sample correct value for the combined hash, so we can verify our implementations against it? Or ignoring all of the above, can we have the actual code instead of a textual description of it? 😓 I managed to get Settings to register my first attempt at this extension in beta 1. Now, in beta 2, any other project (including the sample code) will redirect to Settings, show the Allow/Deny message box, I tap Allow, and then nothing happens. This must be a bug, right? Whenever I try to enable the only extension that Settings accepted (by setting its isEnabled to true), its status goes to .stopped and the error is, of course, .unknown. How do I debug this? While the extension is .stopped, ALL URL LOADS are blocked on the device. Is this to be expected? (shouldFailClosed is set to false) Is there any way to manually reload the bloom filter? My app ships blocklist updates with background push, so it would be wasteful to fetch the filter at a fixed interval. If so, can we opt out of the periodic fetch altogether? I initially believed the API to be near useless because I didn’t know of its “fuzzy matching” capabilities, which I’ve discovered by accident in a forum post. It’d be nice if those were documented somewhere! Thanks!!