I have a document based SwiftData app in which I would like to implement a persistent cache. For obvious reasons, I would not like to store the contents of the cache in the documents themselves, but in my app's data directory. Is a use case, in which a document based SwiftData app uses not only the ModelContainers from the currently open files, but also a ModelContainer writing a database file in the app's documents directory (for cache, settings, etc.) supported? If yes, how can you inject two different ModelContexts, one tied to the currently open file and one tied to the local database, into a SwiftUI view?

Hi all, I’m building an iOS app where I need to determine user picked files or folders using UIDocumentPickerViewController, whether the selected item is synced or managed by a cloud storage provider such as: Google Drive iCloud Drive OneDrive Dropbox or any third-party File Provider extension My intent is to detect this and optionally warn the user that the item may be subject to syncing behavior. So far, I’ve tried a few different approaches: Extended Attributes (listxattr / getxattr) While this does not give reliable outcome. Heuristically search for keywords like 'Drive', 'GoogleDrive' etc But this is also not reliable. Question Is there any possible reliable and documented way to detect programmatically if a file/folder is cloud-synced or managed by a File Provider from within a regular iOS app (not an extension), especially for: Google Drive OneDrive Dropbox iCloud Other third-party providers? Also, is there any recommended fallback strategy for iOS versions prior to 17 where NSFileProviderManager may have limitations? Any input from Apple engineers or those who have tackled this would be hugely appreciated! Thanks in advance 🙌

Apologies in advance for the long post. I'm new to HomeKit and Matter but not to development, I'm trying to write a SwiftUI app for my smart home to store all of my HomeKit and Matter setup barcodes along with other bits of information. The intention is to scan the QR codes with my App and then save that QR payload in a simple Database along with other manually entered device details. Example payloads: X-HM://00GWIN0B5PHPG <-- Eufy V120 HomeKit Camera MT:GE.01-C-03FOPP6B110 <-- Moes GU10 Matter Bulb I have it 99% working, my app is even able to discern the manual pairing code from the above payloads. However one of the key feature of this is that I want to open a device entry in my app and tap the HomeKit or Matter code displayed in my app and and either: a) Ideally pass it off to the Apple Home app to initiate pairing just like the native Camera App can. b) Create a custom flow in my app using the HomeKit or Matter API's to initiate paring from within my app. So ideally just like the flow that happens when you scan a setup QR with the normal camera and tap "Open in Home". However I want to trigger this flow with just knowing the Payload and not with scanning it via the camera. I was hoping there might be something as simple as a URL scheme that I could call with the payload as a variable and it then deep links and switches to the Home app, but I haven't found any info relating to this that actually works. This is some code I have tried with the HomeKit API but this also results in an error: import HomeKit func startHomePairing(with setupCode: String) { // Handle HomeKit setup guard let payload = HMAccessorySetupPayload(url: URL(string: setupCode)!) else { print("Invalid HomeKit setup code or format.") return } let setupRequest = HMAccessorySetupRequest() setupRequest.payload = payload let setupManager = HMAccessorySetupManager() // Perform the setup request and handle the result setupManager.performAccessorySetup(using: setupRequest) { result, error in if let error = error { // Error handling: print the error details print("Error starting setup: \(error.localizedDescription)") // Print more details for debugging print("Full Error: \(error)") } else { // Success: pairing was successful print("Successfully launched Home app for HomeKit setup.") } } } But when passing in the QR payloads above it give the following .. HomeKit Code [0CAB3B05] Failed to perform accessory setup using request: Error Domain=HMErrorDomain Code=17 "(null)" Matter Code Failed to create HMSetupAccessoryPayload from setup payload URL MT:GE.01-C-03FOPP6B110: Error Domain=HMErrorDomain Code=3 "(null)" I have added the "HomeKit" and "Matter Allow Setup Payload" capabilities to my app, I have also ensured I have these in the .plist .. <key>NSHomeKitUsageDescription</key> <string>Access required to HomeKit to initiate pairing for new accessories</string> I also added a call to ensure my app appears in the Settings / Privacy / HomeKit section. I originally thought was a seemingly simple task, but I am really struggling with how to make it work!

Hello! 👋 I am noticing new failures in the iOS 18.5 Developer Beta build (22EF5042g) when calling the system call connect() (from C++ source, in network extension). When using cell/mobile data (Mint & T-Mobile) this returns with EINTR (interrupted system call) right away. When I switch over to wifi, everything works fine. Note: I have not tested on other mobile carriers; which could make a difference since T-Mobile/Mint are IPv6 networks. FWIW, this is working in the previous developer beta (18.4). Anyone have any ideas?

I need to have a dynamic parameter for Shortcuts, so a person can say something like Hey Siri, order a pizza with The parameter code in the appIntent is @Parameter(title: "Title") var itemName: String In the Shortcut I use: AppShortcut( intent: NewItemIntent(), phrases: [ "order \(\.$itemName) using \(.applicationName)" ], shortTitle: "Order Item", systemImageName: "sparkles" ) When I call it "hey Siri, order pizza using ***" where pizza should be passed via the parameter then handed off to the appintent. However, it ignores the spoken parameter in lieu of putting up a dialog asking "What's the name?" I can say "pizza" and it now works. How can I pick up the parameter without having to go to that second step as the code implies?

I'm working on a DriverKit driver. I have it running on macOS, including a very simple client app written in SwiftUI. Everything is working fine there. I've added iPadOS as a destination for the app as demonstrated in the WWDC video on DriverKit for iPadOS. The app builds and runs on my iPad, as expected (after a little work to conditionalize out my use of SystemExtensions.framework for installation on macOS). However, after installing and running the app on an iPad, the driver does not show up in Settings->General, nor in the app-specific settings pane triggered by the inclusion of a settings bundle in the app. I've confirmed that the dext is indeed being included in the app bundle when built for iPadOS (in MyApp.app/SystemExtensions/com.me.MyApp.MyDriver.dext). I also can see in the build log that there's a validation step for the dext, and that seems to be succeeding. I don't know why the app isn't being discovered -- or in any case surfaced to the user -- when the app is installed on the iPad. Has anyone faced this problem and solved it? Are there ways to troubleshoot installation/discovery of an embedded DriverKit extensions on iOS? Unlike on macOS, I don't really see any relevant console messages.

I'm trying to run this example project: https://developer.apple.com/documentation/HealthKit/building-a-multidevice-workout-app When I run it on my device (iPhone 16 Pro and Apple Watch Ultra 2) I get this error: -[SPRemoteInterface _appRecoverAnyExtendedRuntimeSession:]_block_invoke:4350: Got no sessions back from -[CSLSSessionService existingRunningSessions:] or -[CSLSSessionService existingScheduledSessions:] after receiving a PUICInitializeSessionServiceAction I start the workout from my phone, which successfully starts the workout on the watch. But this callback is never triggered on the phone: healthStore.workoutSessionMirroringStartHandler { // not happening } This makes it difficult to learn the mirroring workout technique. I'm using Xcode 16.3 and Mac OS 15.4.1. Any help appreciated!

My laptop (M1 Pro, macOS 15.3.2) is connected to a dual stack network via Wi-Fi. The home.arpa. domain is supplied as a search domain via both DHCPv4 (options 15 and 119) and DHCPv6 (option 24). "Details…" for the network connection in System Settings show this domain under the DNS tab. The laptop uses a Forwarding DNS Resolver of my router, which in turn forwards requests for home.arpa. (including subdomains) to a local DNS server (CoreDNS) which is authoritative for this zone. The DNS server is configured via the following zone file: $ORIGIN home.arpa. $TTL 3600 @ IN SOA @ nobody.invalid. (1 3600 1200 604800 3600) @ NS @ @ AAAA ….1 gateway A ….1 gateway AAAA …::1 b._dns-sd._udp PTR @ lb._dns-sd._udp PTR @ db._dns-sd._udp PTR @ _services._dns-sd._udp PTR _smb._tcp _smb._tcp PTR Media._smb._tcp Media._smb._tcp SRV 0 0 445 gateway Media._smb._tcp TXT ("path=/media" "u=guest") Output of dig(1) looks like: $ dig @….1 -t PTR lb._dns-sd._udp.home.arpa. ;; Got answer: ;; ->>HEADER<<- opcode: QUERY, status: NOERROR, id: 43291 ;; flags: qr rd ra; QUERY: 1, ANSWER: 1, AUTHORITY: 1, ADDITIONAL: 0 ;; QUESTION SECTION: ;lb._dns-sd._udp.home.arpa. IN PTR ;; ANSWER SECTION: lb._dns-sd._udp.home.arpa. 1993 IN PTR home.arpa. ;; AUTHORITY SECTION: home.arpa. 2771 IN NS home.arpa. $ dig @….1 -t PTR _services._dns-sd._udp.home.arpa. ;; Got answer: ;; ->>HEADER<<- opcode: QUERY, status: NOERROR, id: 9057 ;; flags: qr rd ra; QUERY: 1, ANSWER: 1, AUTHORITY: 1, ADDITIONAL: 0 ;; QUESTION SECTION: ;_services._dns-sd._udp.home.arpa. IN PTR ;; ANSWER SECTION: _services._dns-sd._udp.home.arpa. 3600 IN PTR _smb._tcp.home.arpa. ;; AUTHORITY SECTION: home.arpa. 3600 IN NS home.arpa. $ dig @….1 -t PTR _smb._tcp.home.arpa. ;; Got answer: ;; ->>HEADER<<- opcode: QUERY, status: NOERROR, id: 44220 ;; flags: qr rd ra; QUERY: 1, ANSWER: 1, AUTHORITY: 1, ADDITIONAL: 0 ;; QUESTION SECTION: ;_smb._tcp.home.arpa. IN PTR ;; ANSWER SECTION: _smb._tcp.home.arpa. 3599 IN PTR Media._smb._tcp.home.arpa. ;; AUTHORITY SECTION: home.arpa. 3599 IN NS home.arpa. $ dig @….1 -t SRV Media._smb._tcp.home.arpa. ;; Got answer: ;; ->>HEADER<<- opcode: QUERY, status: NOERROR, id: 45878 ;; flags: qr rd ra; QUERY: 1, ANSWER: 1, AUTHORITY: 1, ADDITIONAL: 0 ;; QUESTION SECTION: ;Media._smb._tcp.home.arpa. IN SRV ;; ANSWER SECTION: media._smb._tcp.home.arpa. 3600 IN SRV 0 0 445 gateway.home.arpa. ;; AUTHORITY SECTION: home.arpa. 3600 IN NS home.arpa. $ dig @….1 -t A gateway.home.arpa. ;; Got answer: ;; ->>HEADER<<- opcode: QUERY, status: NOERROR, id: 2782 ;; flags: qr rd ra; QUERY: 1, ANSWER: 1, AUTHORITY: 1, ADDITIONAL: 0 ;; QUESTION SECTION: ;gateway.home.arpa. IN A ;; ANSWER SECTION: gateway.home.arpa. 86400 IN A 192.168.99.1 ;; AUTHORITY SECTION: home.arpa. 3578 IN NS home.arpa. $ dig @….1 -t AAAA gateway.home.arpa. ;; Got answer: ;; ->>HEADER<<- opcode: QUERY, status: NOERROR, id: 17297 ;; flags: qr rd ra; QUERY: 1, ANSWER: 1, AUTHORITY: 1, ADDITIONAL: 0 ;; QUESTION SECTION: ;gateway.home.arpa. IN AAAA ;; ANSWER SECTION: gateway.home.arpa. 3600 IN AAAA fd6f:9784:5753::1 ;; AUTHORITY SECTION: home.arpa. 3600 IN NS home.arpa. Output of dns-sd(1): /usr/bin/dns-sd -test … Testing for error returns when various strings are > 63 bytes: PASSED Running basic API input range tests with various pointer parameters set to NULL: Basic API input range tests: PASSED $ dns-sd -m -F Looking for recommended browsing domains: DATE: ---Fri 11 Apr 2025--- 8:50:17.846 ...STARTING... Timestamp Recommended Browsing domain 8:50:17.847 Added (More) local 8:50:17.847 Added arpa - > home $ dns-sd -B _smb._tcp home.arpa. Browsing for _smb._tcp.home.arpa. DATE: ---Fri 11 Apr 2025--- 8:59:10.044 ...STARTING... $ dns-sd -L Media _smb._tcp home.arpa. Lookup Media._smb._tcp.home.arpa. DATE: ---Fri 11 Apr 2025--- 9:15:53.328 ...STARTING... $ dns-sd -Q _smb._tcp.home.arpa. PTR IN DATE: ---Fri 11 Apr 2025--- 9:16:52.208 ...STARTING... Timestamp A/R Flags IF Name Type Class Rdata 9:16:52.210 Add 40000002 0 _smb._tcp.home.arpa. PTR IN 0.0.0.0 No Such Record 9:16:52.222 Add 2 0 _smb._tcp.home.arpa. PTR IN 0.0.0.0 No Such Record Similarly, when I open Finder->Network I see home.arpa but it's empty. Of interest is that on the DNS server side I see the following requests being made: 2025-04-11 09:03:15 container,info,debug [INFO] […]:56541 - 21555 "SOA IN _afpovertcp._tcp.home.arpa. udp 44 false 512" NXDOMAIN qr,aa,rd 112 0.000755089s 2025-04-11 09:03:15 container,info,debug [INFO] […]:56077 - 58266 "SOA IN _smb._tcp.home.arpa. udp 37 false 512" NOERROR qr,aa,rd 105 0.001012632s 2025-04-11 09:03:15 container,info,debug [INFO] […]:45274 - 45976 "SOA IN _rfb._tcp.home.arpa. udp 37 false 512" NXDOMAIN qr,aa,rd 105 0.000762339s 2025-04-11 09:03:15 container,info,debug [INFO] […]:54387 - 32090 "SOA IN _adisk._tcp.home.arpa. udp 39 false 512" NXDOMAIN qr,aa,rd 107 0.001058132s 2025-04-11 09:03:15 container,info,debug [INFO] […]:35855 - 51155 "SOA IN _tcp.home.arpa. udp 32 false 512" NOERROR qr,aa,rd 100 0.000664963s I suppose that an attempt to locate services is made but it's unsuccessful and I'm not sure why. What further debugging can I attempt?

I have transitioned to CKSyncEngine for syncing data to iCloud, and it is working quite well. I have a question regarding best practices for modifying and saving a CKRecord which already exists in the private or shared database. In my current app, most CKRecords will never be modified after saving to the database, so I do not persist a received record locally after updating my local data model. In the rare event that the local data for that record is modified, I manually fetch the associated server record from the database, modify it, and then use CKSyncEngine to save the modified record. As an alternative method, I can create a new CKRecord locally with the corresponding recordID and the modified data, and then use CKSyncEngine to attempt to save that record to the database. Doing so generates an error in the delegate method handleSentRecordZoneChanges, where I receive the local record I tried to save back inevent.failedRecordSaves with a .serverRecordChanged error, along with the corresponding server CKRecord. I can then update that server record with the local data and re-save using CKSyncEngine. I have not yet seen any issues when doing it this way. The advantage of the latter method is that CKSyncEngine handles the entire database operation, eliminating the manual fetch step. My question is: is this an acceptable practice, or could this result in other unforeseen issues?

I have simple non-consumable IAPs set up for an app on macOS. Testing in development with a local .storekit configuration file, everything works as expected. Testing in development with a remote Sandbox, everything also seems to work fine. Product names and prices fetch correctly, I am able to make purchases with a Sandbox account (both US and UK). Once I upload a build into TestFlight, IAPs no longer work. The tester would download the Beta app from TestFlight. They open a license manager and can see all the product names, descriptions and prices are pulled from Apple servers correctly (with the correct local currency as well!). So far so good. When trying to purchase any of the IAP, the following error appears: This is TestFlight so testers are using their real Apple ID. My understanding is that they should continue using their production credentials and a TestFlight Sandbox would be configured behind the scenes automatically. This error always says the users cannot purchase from a US store and must switch to [whatever user’s actual store location is] store. For example, my account is based in the UK, has got a UK billing address and a UK payment method, and the error tells me to switch to the UK store. People in Canada get a similar error - you must switch from the US store to Canadian. The error makes no sense, the account is already in the desired country. Clicking on the “Change Store” button opens the App Store app and displays another error: “Cannot Connect to App Store”. Clicking Retry just results in this errors showing again and again. Clicking OK takes us back to the failed IAP purchase and the final error message appears: “Purchase Error - Unable to Complete Request”. Things I’ve done / checked: IAPs are configured in App Store Connect and available for all regions prices are set for all regions in App Store Connect IAP name and description localisation in English (UK) IAP status is Ready to Submit, I don’t think I can go past that unless I make a production release (which I can’t until we fix the problem) IAP capabilities added in xcode the problem is not account, machine, or location dependent - every beta tester testing my app on TestFlight has the same issue, they each use a different account and have accounts in different countries double checked the App Store account location in the App Store settings - it is definitely matching the store this error is asking to switch to application exits at startup with error 173 if app receipt cannot be found - this one was suggested by the review team, I could not really find any documentation for it review team also suggested I should add com.apple.security.network.client to enable IAP connectivity. I did add that to one of the builds and it did not help. I am not really convinced this is necessary Any suggestions on what to check and what to try? I have run out of ideas.

In a document based SwiftData app for macOS, how do you go about opening a (modal) child window connected to the ModelContainer of the currently open document? Using .sheet() does not really result in a good UX, as the appearing view lacks the standard window toolbar. Using a separate WindowGroup with an argument would achieve the desired UX. However, as WindowGroup arguments need to be Hashable and Codable, there is no way to pass a ModelContainer or a ModelContext there: WindowGroup(id: "myWindowGroup", for: MyWindowGroupArguments.self) { $args in ViewThatOpensInAWindow(args: args) } Is there any other way?

Hi, Currently, instead of using a real device and test account for in-app purchase testing, we are using Products.storekit with the Simulator. Our app offers a subscription plan with a 3-day free trial. We would like to simulate the following test scenarios: User cancels the subscription within the 3-day free trial period. User cancels the subscription after the 3-day free trial period. However, in Xcode, under Debug > StoreKit > Manage Transactions..., we couldn’t find an option to simulate a subscription cancellation. There is an option to refund the purchase, but we believe this is not the same as a cancellation. Do you have any idea how we can simulate these two cases using Products.storekit and the Simulator? Thanks in advance!

IMPORTANT Rather than use the code below, I recommend that you adopt Swift’s shiny-new Subprocess package. That’s what I’m doing! (-: Running a child process using Process (or NSTask in Objective-C) is easy, but piping data to and from the child’s stdin and stdout is surprisingly tricky. I regularly see folks confused by this. Moreover, it’s easy to come up with a solution that works most of the time, but suffers from weird problems that only show up in the field [1]. I recently had a couple of DTS incidents from folks struggling with this, so I sat down and worked through the details. Pasted below is the results of that effort, namely, a single function that will start a child process, pass it some data on stdin, read the data from the child’s stdout, and call a completion handler when everything is done. There are some things to note here, some obvious, some not so much: I’ve included Swift and Objective-C versions of the code. Both versions work the same way. The Swift version has all the comments. If you decide to base your code on the Objective-C version, copy the comments from there. I didn’t bother collecting stderr. That’s not necessary in many cases and, if you need it, it’s not hard to extend the code to handle that case. I use Dispatch I/O rather than FileHandle to manage the I/O channels. Dispatch I/O is well suited to this task. In contrast, FileHandle has numerous problems working with pipes. For the details, see Whither FileHandle?. This single function is way longer than I’d normally tolerate. This is partly due to the extensive comments and party due to my desire to maintain focus. When wrapping Process it’s very easy to run afoul of architecture astronaut-ism. Indeed, I have a much more full-featured Process wrapper sitting on my hard disk, but that’s going to stay there in favour of this approach (-: Handling a child process correctly involves some gnarly race conditions. The code has extensive comments explaining how I deal with those. If you have any questions or comments about this, put them in a new thread. Make sure to tag that thread with Foundation and Inter-process communication so that I see it. Share and Enjoy — Quinn “The Eskimo!” @ Developer Technical Support @ Apple let myEmail = "eskimo" + "1" + "@" + "apple.com" [1] Indeed, this post shows that I’ve made this sort of mistake myself )-:

DYLD, symbol '_CTRadioAccessTechnologyNR' not found, expected in '/System/Library/Frameworks/CoreTelephony.framework/CoreTelephony'

Hi everyone, We operate an online game where all in-app assets are stored server-side and require a logged-in account (no device binding). I’d like guidance on four areas: Do we really need deviceVerification / deviceVerificationNonce? – Because every purchase is tied to an account and we enforce a global transactionId UNIQUE constraint, replay or cross-account reuse appears infeasible. Under these conditions, is omitting device verification acceptable, or are there situations where Apple still recommends it? Permanent rate-limit increase for the App Store Server API – During anniversary events we saw bursts of ~18 000 requests per hour, breaching the current hourly cap on the App Store Server API (verifyTransaction, getNotificationHistory, etc.). Is there a formal process to request a long-term rate-limit expansion (or an alternative tier) from Apple? When is an App Store Server API call required for a StoreKit 2 jwsRepresentation? Docs say “call the API if you’re unsure,” but there’s no clear cut-off. Because we fully validate the JWS signature plus the entire certificate chain (including CRL/OCSP checks) on our server, local cryptographic validation seems sufficient for consumables. For subscriptions we still plan to hit the API to fetch the latest status. Does this separation match Apple’s best practice? If Apple does recommend hitting the API for consumables as well, we’d like a concrete rule of thumb—e.g. “if the item price is USD 50 or higher, always use the API.” Is establishing such thresholds consistent with Apple’s intent? Refund-risk reduction from Send Consumption Info – Adapty reports a 40–60 % refund-rate drop for subscriptions when using Send Consumption Info (blog reference). Can we expect similar reduction for consumable IAP in social/online games? Any real-world results would be helpful. Thanks in advance for any guidance!

I'm working on implementing file moving with NSFileCoordinator. I'm using the slightly newer asynchronous API with the NSFileAccessIntents. My question is, how do I go about notifying the coordinator about the item move? Should I simply create a new instance in the asynchronous block? Or does it need to be the same coordinator instance? let writeQueue = OperationQueue() public func saveAndMove(data: String, to newURL: URL) { let oldURL = presentedItemURL! let sourceIntent = NSFileAccessIntent.writingIntent(with: oldURL, options: .forMoving) let destinationIntent = NSFileAccessIntent.writingIntent(with: newURL, options: .forReplacing) let coordinator = NSFileCoordinator() coordinator.coordinate(with: [sourceIntent, destinationIntent], queue: writeQueue) { error in if let error { return } do { // ERROR: Can't access NSFileCoordinator because it is not Sendable (Swift 6) coordinator.item(at: oldURL, willMoveTo: newURL) try FileManager.default.moveItem(at: oldURL, to: newURL) coordinator.item(at: oldURL, didMoveTo: newURL) } catch { print("Failed to move to \(newURL)") } } }

In the fitness app under iOS 18, the location of all workouts is displayed on a small map. For workouts with routes, I can already successfully read out the route and thus also determine the starting point. So that works. For indoor workouts such as yoga or indoor rowing, the exact location is also displayed in the fitness app. I would now also like to read out this location for these indoor workouts in my app. Does anyone know how to do this?

Firstly, I'm completely new to native Swift/iOS Development so apologies if this is a simple question that I'm seemingly misunderstanding. I have an app which has the Multicast Networking entitlement and works fine on my own iPhone, however it only has one interface when I list them (en0) The multicast networking, however, fails entirely on another test iPhone but this also appears to have one or more 'ipsecX' interfaces both with the IP 192.0.0.6 - I'm guessing but I wonder if this is related to a connection to Apple Watch as I've noticed two devices that have these additional interfaces, and both of them are connected to Apple Watch (with no VPNs configured) and that's the only thing that differentiates them from my own iPhone. I can reproduce the symptoms on my own iPhone by connecting to a VPN which creates a utunX interface (but in my case disconnecting from the VPN removes this interface and it works as expected) I expect a solution would be to bind my Multicast Group to the WiFi IP but I've tried a few things without success; Setting params.requiredInterfaceType = .wifi Looping through each interface to try and 'find' en0 and bind this way; let queue = DispatchQueue(label: "En0MonitorQueue") monitor.pathUpdateHandler = { [weak self] path in // Find the en0 interface if let en0 = path.availableInterfaces.first(where: { $0.name == "en0" }) { monitor.cancel() // Stop monitoring once found let params = NWParameters.udp params.allowLocalEndpointReuse = true params.requiredInterface = en0 guard let multicast = try? NWMulticastGroup(for: [ .hostPort( host: NWEndpoint.Host(self?.settings.multicastIP ?? "224.224.0.77"), port: NWEndpoint.Port(rawValue: UInt16(self?.settings.multicastPort ?? 23019)) ) ]) else { print("Failed to Start Multicast Group") return } let group = NWConnectionGroup(with: multicast, using: params) // previous multicast stuff is here } else { print("en0 interface not found, waiting...") } } monitor.start(queue: queue) Neither seems to work. I feel I must be missing something simple, because it should not be the case that simply enabling a VPN (or having another interface created by something else) breaks Multicast on en0/WiFi. That said, I also don't want to limit the user to en0 as they may wish to use Ethernet interfaces, but for now it would be good to make it work to confirm this is the problem.

My iOS app uses a Message Filter extension (via ILMessageFilterQueryHandling) and works only when run directly as the extension target. When installed normally (via TestFlight), the filter does not trigger at all — which I now believe is because iOS enforces the com.apple.developer.identitylookup entitlement at runtime. Anyone know anything about this? I put in a request for the entitlement last week but heard nothing back. Called Apple "technical" support and they had no idea what I was talking about. The documentation around this is EXTREMELY lacking in my opinion...

My use case is the following: Every user of my app can create as an owner a set of items.  These items are private until the owner invites other users to share all of them as participant. The participants can modify the shared items and/or add other items. So, sharing is not done related to individual items, but to all items of an owner. I want to use CoreData & CloudKit to have local copies of private and shared items. To my understanding, CoreData & CloudKit puts all mirrored items in a special zone „com.apple.coredata.cloudkit.zone“. So, this zone should be shared, i.e. all items in it. In the video it is said that NSPersistentCloudKitContainer uses Record Zone Sharing optionally in contrast to hierarchically record sharing using a root record. But how is this done? Maybe I can declare zone „com.apple.coredata.cloudkit.zone“ as a shared zone?