Tech stack: React Native + Expo. We are using two solo developer accounts (not a business or team account). Context: Friend and I set out to make an app together. Friend created app and set it up on Apple. We worked on it together. He controlled devops (builds and submission). Friend no longer can commit to development. Wants to transfer to me. I create apple developer account. After app transfer, my phone (deviceid) underwent a 14 day soft ban preventing builds. That has since been lifted. There seems to be something in place preventing me from making dev builds on the original dev bundleid. It says it's still owned by him despite the app transfer. Bottom line: what needs to happen so 1 can make dev builds? nice to have: is there a way for us to both make dev builds under the same bundleid?

Hello, I’m experiencing a serious issue with TestFlight. I correctly set up internal testing: • Added testers via email • Assigned builds • Everything shows as “Ready to Test” However, when trying to install via TestFlight, I get: “App Name couldn’t be installed” “The requested app is not available or doesn’t exist” ⚠️ Important note: This issue is NOT limited to a single app. It happens across all apps in my account. So it does not seem to be app-specific. What I’ve already checked: • Agreements, Tax, and Banking are completed • App Privacy is fully filled • Builds are successfully uploaded and selected • I am correctly added as an internal tester • Tried logging out/in of TestFlight • Reinstalled the app and TestFlight I contacted Apple Developer Support twice but received no response. Has anyone experienced this issue affecting multiple apps? Any help or guidance would be greatly appreciated. ⸻ Additional technical details: • Developer Account Apple ID: yilmaz34muhammed(at)icloud.com • App Store Connect App ID: 6762088121 • Bundle ID: com.devyilmaz.TahlilAI • Build Version: 0.2.0 (1) This issue occurs across all apps in my account.

Hello, I’m experiencing a serious issue with TestFlight. I correctly set up internal testing: • Added testers via email • Assigned builds • Everything shows as “Ready to Test” However, when trying to install via TestFlight, I get: “App Name couldn’t be installed” “The requested app is not available or doesn’t exist” ⚠️ Important note: This issue is NOT limited to a single app. It happens across all apps in my account. So it does not seem to be app-specific. What I’ve already checked: • Agreements, Tax, and Banking are completed • App Privacy is fully filled • Builds are successfully uploaded and selected • I am correctly added as an internal tester • Tried logging out/in of TestFlight • Reinstalled the app and TestFlight I contacted Apple Developer Support twice but received no response. Has anyone experienced this issue affecting multiple apps? Any help or guidance would be greatly appreciated. ⸻ Additional technical details: • Developer Account Apple ID: yilmaz34muhammed(at)icloud.com • App Store Connect App ID: 6762088121 • Bundle ID: com.devyilmaz.TahlilAI • Build Version: 0.2.0 (1) This issue occurs across all apps in my account.

Hi Support Team, I am new here. I am unable to add my fonts to the asset catalog there is no option to add new font set when I click the plus sign. When I drag my files in they show up as data. I have a Contents.json in the font folder called BeVietnamProFont.font. Is there something I am doing wrong? Thanks SO much! { "info": { "version": 1, "author": "xcode" }, "properties": {}, "fonts": [ { "filename": "BeVietnamPro-Black.ttf", "weight": "black", "style": "normal" }, { "filename": "BeVietnamPro-BlackItalic.ttf", "weight": "black", "style": "italic" }, { "filename": "BeVietnamPro-Bold.ttf", "weight": "bold", "style": "normal" }, { "filename": "BeVietnamPro-BoldItalic.ttf", "weight": "bold", "style": "italic" }, { "filename": "BeVietnamPro-ExtraBold.ttf", "weight": "heavy", "style": "normal" }, { "filename": "BeVietnamPro-ExtraBoldItalic.ttf", "weight": "heavy", "style": "italic" }, { "filename": "BeVietnamPro-ExtraLight.ttf", "weight": "ultralight", "style": "normal" }, { "filename": "BeVietnamPro-ExtraLightItalic.ttf", "weight": "ultralight", "style": "italic" }, { "filename": "BeVietnamPro-Light.ttf", "weight": "light", "style": "normal" }, { "filename": "BeVietnamPro-LightItalic.ttf", "weight": "light", "style": "italic" }, { "filename": "BeVietnamPro-Regular.ttf", "weight": "regular", "style": "normal" }, { "filename": "BeVietnamPro-Italic.ttf", "weight": "regular", "style": "italic" }, { "filename": "BeVietnamPro-Medium.ttf", "weight": "medium", "style": "normal" }, { "filename": "BeVietnamPro-MediumItalic.ttf", "weight": "medium", "style": "italic" }, { "filename": "BeVietnamPro-SemiBold.ttf", "weight": "semibold", "style": "normal" }, { "filename": "BeVietnamPro-SemiBoldItalic.ttf", "weight": "semibold", "style": "italic" }, { "filename": "BeVietnamPro-Thin.ttf", "weight": "thin", "style": "normal" }, { "filename": "BeVietnamPro-ThinItalic.ttf", "weight": "thin", "style": "italic" } ] } ![]("https://developer.apple.com/forums/content/attachment/56835f04-d1c1-468f-808b-9a786562d367" "title=Screenshot 2025-07-13 at 1.05.05 PM.png ;width=539;height=630")

In Simulator Korean character system has not working well. I want to type "", however, if I type the same thing on the simulator's virtual keyboard (Korean), it comes out as ''. I think this is caused by IME system in ios simulator bug. I think this has been happening since IOS 17.

i have been added to an apple membership organization, and given App manager's rights b ut my build keeps failing and asking me to get more access

Hello, I am facing a critical issue where the Family Controls (Distribution) entitlement is not being applied to my app extensions, despite the main app ID being approved. Main App ID: com.hayashikento.focuspact (Approved on March 13) Extension ID 1: com.hayashikento.focuspact.ShieldActionExtension (Pending/Not visible) Extension ID 2: com.hayashikento.focuspact.ShieldConfigurationExtension (Pending/Not visible) I have submitted requests multiple times, but the entitlement does not appear in the "Capability Requests" for these extensions in the Certificates, Identifiers & Profiles portal. Furthermore, I am unable to contact Developer Support because the "Contact Us" form on the developer website consistently shows a "Request error" or freezes on the submission page. Since I am completely blocked from TestFlight distribution, could someone from Apple please look into my account (Team ID: UHG4J7F7NH) and manually sync these entitlements? Thank you for your help.

Le build iOS via EAS échoue systématiquement lors de la phase Xcode. Bien que les capacités Family Controls et App Groups soient activées sur le portail Apple Developer et configurées dans le app.json, les profils de provisionnement générés par EAS sont rejetés par Xcode car ils ne contiendraient pas les droits nécessaires. Configuration du projet : Targets (4) : App principale + 3 extensions (ShieldConfiguration, ShieldAction, ActivityMonitorExtension). Capabilities requises : Family Controls (Development), App Groups. EAS CLI Version : 18.0.6 (et versions antérieures testées). Erreur Xcode récurrente : error: Provisioning profile "[expo] com.*****.*** AdHoc 177230..." doesn't support the Family Controls (Development) capability.. error: Provisioning profile "... AdHoc ..." doesn't include the com.apple.developer.family-controls entitlement.. Ce qui a déjà été tenté (sans succès) : Configuration app.json : Ajout manuel des entitlements pour le bundle principal et configuration du plugin react-native-device-activity. Nettoyage Credentials : Suppression totale des profils et des identifiants sur le site Expo.dev ET sur le portail Apple Developer. +1 Forçage Sync : Utilisation de eas build --clear-cache et réponse "No" à la réutilisation des profils existants. Observation étrange : Le terminal indique souvent ✔ Synced capabilities: No updates, alors que les droits viennent d'être modifiés sur le portail Apple. Sur le portail Apple, les profils affichent pourtant bien "Family Controls (Development)" dans les capacités activées. Je met en piece jointe un des profiles.

Device: iPhone 13 OS Version: iOS 26.4, iOS 26.5 Summary: The Settings app crashes when accessing the Sandbox account management screen in Developer Settings while the device is offline. Steps to Reproduce: Enable Developer Mode on the device Disconnect from the internet (Wi-Fi and cellular off) Go to Settings → Developer Ensure a Sandbox account is signed in Tap on "Sandbox" Tap on "Manage" Expected Result: The system should either: Open the Sandbox management screen, or Show an error indicating no internet connection Actual Result: The Settings app crashes immediately after tapping "Manage". Reproducibility: Always (100%) when offline Additional Notes: Issue observed on iOS 26.4 and iOS 26.5 Does not occur on iOS 18 May also be present in other iOS 26.x versions Does not occur when the device has an active internet connection

So, as we found out from WWDC, the migration to Apple Silicon is inevitable. Does anyone have a good recommendation for a replacement for Macintosh Common Lisp on Apple Silicon? I was using it back in the MPW days and struggling to keep the Lisp code working, but Apple Silicon has thrown a money wrench at it! Thanks in advance for any advice on any available Apple Silicon Lisp development tools!

First time user here. Trying to build my React-Native app on xcode. I keep getting "Could not build Module" and "missing package product" and tried many combination for my Podfile. I am on macbook pro M2, XCode version 16.2, building on iphone 16 v18.3.1. Pod version 1.16.2, react-native-cli:2.0.1, Here is my Podfile. I tried to assign modular_headers to individual Firebase packages but then I cant pod install. require_relative '../node_modules/react-native/scripts/react_native_pods' require_relative '../node_modules/@react-native-community/cli-platform-ios/native_modules' use_modular_headers! platform :ios, '18.0' prepare_react_native_project! target 'plana' do config = use_native_modules! use_react_native!( :path => config[:reactNativePath], :fabric_enabled => false, :app_path => "#{Pod::Config.instance.installation_root}/.." ) post_install do |installer| react_native_post_install( installer, config[:reactNativePath], :mac_catalyst_enabled => false, ) end end

Im getting this specific error 'Apple 403 detected - Access forbidden' when trying to build my app, my previous 10 builds all succesfully work but now it keeps on giving this error. I'm guessing its because of a new agreement email I recieved. But when i got to both developer website and app store connect there is no new agreements to accept. I'm quite stuck. Any help appreciated. Thanks

Hello there everyone. I've got numerous support projects using old school development. Things from Objective-C to RxSwift and UIKit. I've tried the LLM/Agents and they just destroy the codebase over time, so I have given up. The final straw was trying to get it to fix a POSTCODE validation issue which was using some novel ways to provide validation in place using RxSwift. Has anyone had any luck with these LLMs on Legacy codebases? Would love to hear tips.

I’ve created a document type for my app and set it up in the Info Configuration in Xcode. This all works as expected: Implemented with the Transferrable API and ShareLink, I can share an app’s file via the Files app or Notes and then import the file via a Share extension and the fileImport swiftUI api. My question is regarding Messages, specifically. It appears as a ShareLink option and I’m able to send my app’s document type via a message, but I’m unable to open it or share it (internally, with my app), other than being able to forward or delete it. If I copy the file, I can’t access it within my app (it’s still stored in the Messages private bundle) and startAccessingSecurityScopedResource returns false as expected. The message does detect the right icon, so it’s recognizing the custom document type. If my Share Extension, exported document type, and transferable implementation is configured correctly, should I be able to open a file for my app shared via Messages? Is this an allowed action? I get various answers from AI, and I can’t test this in the Simulator on pre-26 devices.

Hello, I am experiencing an authentication issue when submitting my Expo iOS app to App Store Connect using the Expo EAS CLI from the terminal. The exact flow is as follows: I run the submit command in the terminal. I am prompted to enter my Apple ID. After entering the Apple ID, I am prompted to enter my Apple ID password. After the password is accepted, I am prompted to enter a 6-digit verification code. I receive the 6-digit code immediately via SMS or phone call. I enter the code correctly and immediately, but the CLI always returns “Invalid code.” This happens every time. Important notes: The Apple ID and password are correct. The 6-digit code is entered immediately and exactly as received. Logging in to App Store Connect via a web browser with the same Apple ID, password, and SMS code works without any issue. The problem only occurs when authenticating through the terminal using Expo EAS CLI. Could you please advise why the verification code is being rejected in the CLI and how I can successfully authenticate and submit my app?

I’m a registered iOS developer, and I’ve been facing an issue with installing iOS developer updates for the past couple of years. I can download the updates, but they get stuck at 99.9% complete and don’t finish. I’ve tried following the instructions to force restart the phone, but it stays on the Apple logo screen until it dies. I can update official iOS versions, but not beta versions. To update, I have to put the phone in DFU mode and install the update that way. This is frustrating and prevents me from making timely updates to my app and from diagnosing new issues during testing. I’d like to request that Apple investigate this issue and identify a solution. For reference, I’ve installed a bare-bones version with no new apps, and the problem persists. I would like a resolution that allows me to update normally without having to DFU the phone each time. This occurs via OTA or IPSW manual download and installation. Please refer to the following FB submission numbers: FB21642029 and FB21017894. CAN SOMEONE PLEASE RESPOND BACK TO THIS MESSAGE AND HELP ME TROUBLESHOOT THIS ISSUE?!

I am trying to make an app icon 20 x 20 pixel dimension. I cannot get the icon to be sized this way. It gets blurry. I have used adobe express + illustrator. I have not been able to size it. It is a 400 x 400 dimension png. I want the proportion to be 20 x 20 without losing the clarity.

Hi everyone, I'm developing a visionOS application using Unity with an enterprise developer account. I applied for the Main Camera Access entitlement, but at the time of submission, the email address associated with my Apple ID was deactivated, so I couldn’t receive any email communication from Apple. Later, I updated the email address for my Apple ID. Now, in the Apple Developer portal under Identifiers, I can see that my app has been granted Main Camera Access, and I can also add the corresponding capability in Xcode. However, according to Apple’s documentation(https://developer.apple.com/documentation/visionos/building-spatial-experiences-for-business-apps-with-enterprise-apis): “To use entitlements, you need to include both the entitlement file and a corresponding license file in your app. After Apple approves your app for one or more entitlements, you receive a license file, along with additional instructions.” I never received this license file, possibly due to the deactivated email. I don't know where to find it or how to retrieve it now. What exactly is this license file? If it was originally sent to an unreachable email, how can I request it again or get it resent? Where in the Apple Developer portal (or elsewhere) can I access or download this file? Any help or guidance would be greatly appreciated! Thanks in advance.

The assets in the Asset.xcasset lesser than the asset in the Assets.car file. Because of this the iPA file size increased three times as Assets.car file inside the iPA increased. Why do the asset file size increased enormously. How do we prevent this ? I used Version 26.2 (17C52).

Hello guys, I know people already talked about this here but maybe some of you solved it. When trying Alarmkit, it keeps playing the same default sound. I tried a lot of changes to make it play my custom sound but nothing worked. Has anyone solved this or is it just the alarmkit problem? Thank you and take care guys.