Recently, while developing a network extension on macOS, I encountered a very interesting issue. When the App Sandbox entitlement is included, the NE (Network Extension) can be called and run normally. However, when the App Sandbox is removed, with everything else remaining unchanged, an error occurs. The logs are as follows: Failed to find an app extension with identifier app.acmeVpnM.extension and extension point com.apple.networkextension.packet-tunnel: (null) Found 0 registrations for app.acmeVpnM.extension (com.apple.networkextension.packet-tunnel) If you add app sandbox, it will run normally. this is my container app entitlement this is my NE extension (without App SandBox) I want to know the reason for this. App sandbox shouldn't be mandatory. How can I make my NE run in an environment without app sandbox?

Network is not working when over 50MB size file upload smb using NEFilterDataProvider in macOS The event received through NEFilterDataProvider is returned immediately without doing any other work. override func handleNewFlow(_ flow: NEFilterFlow) -> NEFilterNewFlowVerdict { guard let socketFlow = flow as? NEFilterSocketFlow, let auditToken = socketFlow.sourceAppAuditToken, let remoteEndpoint = socketFlow.remoteEndpoint as? NWHostEndpoint, let localEndpoint = socketFlow.localEndpoint as? NWHostEndpoint else { return .allow() } return .filterDataVerdict(withFilterInbound: true, peekInboundBytes: Int.max, filterOutbound: true, peekOutboundBytes: Int.max) } override func handleInboundData(from flow: NEFilterFlow, readBytesStartOffset offset: Int, readBytes: Data) -> NEFilterDataVerdict { guard let socketFlow = flow as? NEFilterSocketFlow, let auditToken = socketFlow.sourceAppAuditToken, let remoteEndpoint = socketFlow.remoteEndpoint as? NWHostEndpoint, let localEndpoint = socketFlow.localEndpoint as? NWHostEndpoint else { return .allow() } return NEFilterDataVerdict(passBytes: readBytes.count, peekBytes: Int.max) } override func handleOutboundData(from flow: NEFilterFlow, readBytesStartOffset offset: Int, readBytes: Data) -> NEFilterDataVerdict { guard let socketFlow = flow as? NEFilterSocketFlow, let auditToken = socketFlow.sourceAppAuditToken, let remoteEndpoint = socketFlow.remoteEndpoint as? NWHostEndpoint, let localEndpoint = socketFlow.localEndpoint as? NWHostEndpoint else { return .allow() } return NEFilterDataVerdict(passBytes: readBytes.count, peekBytes: Int.max) } override func handleInboundDataComplete(for flow: NEFilterFlow) -> NEFilterDataVerdict { guard let socketFlow = flow as? NEFilterSocketFlow, let auditToken = socketFlow.sourceAppAuditToken, let remoteEndpoint = socketFlow.remoteEndpoint as? NWHostEndpoint, let localEndpoint = socketFlow.localEndpoint as? NWHostEndpoint else { return .allow() } return .allow() } override func handleOutboundDataComplete(for flow: NEFilterFlow) -> NEFilterDataVerdict { guard let socketFlow = flow as? NEFilterSocketFlow, let auditToken = socketFlow.sourceAppAuditToken, let remoteEndpoint = socketFlow.remoteEndpoint as? NWHostEndpoint, let localEndpoint = socketFlow.localEndpoint as? NWHostEndpoint else { return .allow() } return .allow() } how can i fix it?

i unfortunatly upgraded to Sequoia since then I see when: i select XCode ->Product->run i see Error: No route to host i cannot grant access to local network for XCode i can no longer debug my program as i did with Sonora

We have a setup where the system uses proxy settings configured via a PAC file. We are investigating how NWConnection behaves inside a Network Extension (NETransparentProxyProvider) with a transparent proxy configuration based on this PAC file. Scenario: The browser makes a connection which the PAC file resolves as "DIRECT" (bypassing the proxy) Our Network Extension intercepts this traffic for analysis The extension creates a new connection using NWConnection to the original remote address. The issue: despite the PAC file’s "DIRECT" decision, NWConnection still respects the system proxy settings and routes the connection through the proxy. Our questions: Is it correct that NWConnection always uses the system proxy if configured ? Does setting preferNoProxies = true guarantee bypassing the system proxy? Additionally: Whitelisting IPs in the Network Extension to avoid interception is not a viable solution because IPs may correspond to multiple services, and the extension only sees IP addresses, not domains (e.g., we want to skip scanning meet.google.com traffic but still scan other Google services on the same IP range). Are there any recommended approaches or best practices to ensure that connections initiated from a Network Extension can truly bypass the proxy (for example, for specific IP ranges or domains)?

My laptop (M1 Pro, macOS 15.3.2) is connected to a dual stack network via Wi-Fi. The home.arpa. domain is supplied as a search domain via both DHCPv4 (options 15 and 119) and DHCPv6 (option 24). "Details…" for the network connection in System Settings show this domain under the DNS tab. The laptop uses a Forwarding DNS Resolver of my router, which in turn forwards requests for home.arpa. (including subdomains) to a local DNS server (CoreDNS) which is authoritative for this zone. The DNS server is configured via the following zone file: $ORIGIN home.arpa. $TTL 3600 @ IN SOA @ nobody.invalid. (1 3600 1200 604800 3600) @ NS @ @ AAAA ….1 gateway A ….1 gateway AAAA …::1 b._dns-sd._udp PTR @ lb._dns-sd._udp PTR @ db._dns-sd._udp PTR @ _services._dns-sd._udp PTR _smb._tcp _smb._tcp PTR Media._smb._tcp Media._smb._tcp SRV 0 0 445 gateway Media._smb._tcp TXT ("path=/media" "u=guest") Output of dig(1) looks like: $ dig @….1 -t PTR lb._dns-sd._udp.home.arpa. ;; Got answer: ;; ->>HEADER<<- opcode: QUERY, status: NOERROR, id: 43291 ;; flags: qr rd ra; QUERY: 1, ANSWER: 1, AUTHORITY: 1, ADDITIONAL: 0 ;; QUESTION SECTION: ;lb._dns-sd._udp.home.arpa. IN PTR ;; ANSWER SECTION: lb._dns-sd._udp.home.arpa. 1993 IN PTR home.arpa. ;; AUTHORITY SECTION: home.arpa. 2771 IN NS home.arpa. $ dig @….1 -t PTR _services._dns-sd._udp.home.arpa. ;; Got answer: ;; ->>HEADER<<- opcode: QUERY, status: NOERROR, id: 9057 ;; flags: qr rd ra; QUERY: 1, ANSWER: 1, AUTHORITY: 1, ADDITIONAL: 0 ;; QUESTION SECTION: ;_services._dns-sd._udp.home.arpa. IN PTR ;; ANSWER SECTION: _services._dns-sd._udp.home.arpa. 3600 IN PTR _smb._tcp.home.arpa. ;; AUTHORITY SECTION: home.arpa. 3600 IN NS home.arpa. $ dig @….1 -t PTR _smb._tcp.home.arpa. ;; Got answer: ;; ->>HEADER<<- opcode: QUERY, status: NOERROR, id: 44220 ;; flags: qr rd ra; QUERY: 1, ANSWER: 1, AUTHORITY: 1, ADDITIONAL: 0 ;; QUESTION SECTION: ;_smb._tcp.home.arpa. IN PTR ;; ANSWER SECTION: _smb._tcp.home.arpa. 3599 IN PTR Media._smb._tcp.home.arpa. ;; AUTHORITY SECTION: home.arpa. 3599 IN NS home.arpa. $ dig @….1 -t SRV Media._smb._tcp.home.arpa. ;; Got answer: ;; ->>HEADER<<- opcode: QUERY, status: NOERROR, id: 45878 ;; flags: qr rd ra; QUERY: 1, ANSWER: 1, AUTHORITY: 1, ADDITIONAL: 0 ;; QUESTION SECTION: ;Media._smb._tcp.home.arpa. IN SRV ;; ANSWER SECTION: media._smb._tcp.home.arpa. 3600 IN SRV 0 0 445 gateway.home.arpa. ;; AUTHORITY SECTION: home.arpa. 3600 IN NS home.arpa. $ dig @….1 -t A gateway.home.arpa. ;; Got answer: ;; ->>HEADER<<- opcode: QUERY, status: NOERROR, id: 2782 ;; flags: qr rd ra; QUERY: 1, ANSWER: 1, AUTHORITY: 1, ADDITIONAL: 0 ;; QUESTION SECTION: ;gateway.home.arpa. IN A ;; ANSWER SECTION: gateway.home.arpa. 86400 IN A 192.168.99.1 ;; AUTHORITY SECTION: home.arpa. 3578 IN NS home.arpa. $ dig @….1 -t AAAA gateway.home.arpa. ;; Got answer: ;; ->>HEADER<<- opcode: QUERY, status: NOERROR, id: 17297 ;; flags: qr rd ra; QUERY: 1, ANSWER: 1, AUTHORITY: 1, ADDITIONAL: 0 ;; QUESTION SECTION: ;gateway.home.arpa. IN AAAA ;; ANSWER SECTION: gateway.home.arpa. 3600 IN AAAA fd6f:9784:5753::1 ;; AUTHORITY SECTION: home.arpa. 3600 IN NS home.arpa. Output of dns-sd(1): /usr/bin/dns-sd -test … Testing for error returns when various strings are > 63 bytes: PASSED Running basic API input range tests with various pointer parameters set to NULL: Basic API input range tests: PASSED $ dns-sd -m -F Looking for recommended browsing domains: DATE: ---Fri 11 Apr 2025--- 8:50:17.846 ...STARTING... Timestamp Recommended Browsing domain 8:50:17.847 Added (More) local 8:50:17.847 Added arpa - > home $ dns-sd -B _smb._tcp home.arpa. Browsing for _smb._tcp.home.arpa. DATE: ---Fri 11 Apr 2025--- 8:59:10.044 ...STARTING... $ dns-sd -L Media _smb._tcp home.arpa. Lookup Media._smb._tcp.home.arpa. DATE: ---Fri 11 Apr 2025--- 9:15:53.328 ...STARTING... $ dns-sd -Q _smb._tcp.home.arpa. PTR IN DATE: ---Fri 11 Apr 2025--- 9:16:52.208 ...STARTING... Timestamp A/R Flags IF Name Type Class Rdata 9:16:52.210 Add 40000002 0 _smb._tcp.home.arpa. PTR IN 0.0.0.0 No Such Record 9:16:52.222 Add 2 0 _smb._tcp.home.arpa. PTR IN 0.0.0.0 No Such Record Similarly, when I open Finder->Network I see home.arpa but it's empty. Of interest is that on the DNS server side I see the following requests being made: 2025-04-11 09:03:15 container,info,debug [INFO] […]:56541 - 21555 "SOA IN _afpovertcp._tcp.home.arpa. udp 44 false 512" NXDOMAIN qr,aa,rd 112 0.000755089s 2025-04-11 09:03:15 container,info,debug [INFO] […]:56077 - 58266 "SOA IN _smb._tcp.home.arpa. udp 37 false 512" NOERROR qr,aa,rd 105 0.001012632s 2025-04-11 09:03:15 container,info,debug [INFO] […]:45274 - 45976 "SOA IN _rfb._tcp.home.arpa. udp 37 false 512" NXDOMAIN qr,aa,rd 105 0.000762339s 2025-04-11 09:03:15 container,info,debug [INFO] […]:54387 - 32090 "SOA IN _adisk._tcp.home.arpa. udp 39 false 512" NXDOMAIN qr,aa,rd 107 0.001058132s 2025-04-11 09:03:15 container,info,debug [INFO] […]:35855 - 51155 "SOA IN _tcp.home.arpa. udp 32 false 512" NOERROR qr,aa,rd 100 0.000664963s I suppose that an attempt to locate services is made but it's unsuccessful and I'm not sure why. What further debugging can I attempt?

Question 1: After NetworkExtension is installed, when the software receives a pushed uninstall command, it needs to download the entire software but fails to uninstall this NetworkExtension. Are there any solutions? Question 2: How can residual, uninstalled NetworkExtensions be cleaned up when SIP (System Integrity Protection) is enabled?

Good day, this is a concept maybe newbie question… what would be the best approach to develop the real time app… what I want is to be able to connect one device to other one within the app, and for example, if the app has a draggable object, then if one user drags the object, the other user see the object moving in real time I his own device, maybe using a ghost mode when interacting… this way both users using the app can interact with the objects in real-time. It’s not a game, so there’s no score… could I use gamecenter? or multipeer connectivity over BT? Is there a native framework? wich would be the easiest and less battery and system consuming approach someone could suggest? thank you in advance….

I have read all the information and forum posts about local network, such as TN3179, etc., and have added NSLocalNetworkUsageDescription, but it does not solve my problem. The problem I encountered is described as follows: Device: iOS18.1.1 Signing method: automatic Xcode debug directly runs, and the app can access 17.25.11.128 normally. However, relase run or packaged into adhoc installation, this IP cannot be accessed. There is a phenomenon that the app package of the App Store can also be used. Our test team has few iOS18+ devices, and internal testing is not possible. Please contact us as soon as possible, thank you. ======= 我已经了解了所有关于local network 相关的资料和论坛帖子，比如TN3179 等等， 已经添加了 NSLocalNetworkUsageDescription， 但是不解决我的问题。 我遇到的问题描述如下： 设备：iOS18.1.1 签名方式：自动 xcode debug 直接运行，app是可以正常访问17.25.11.128的。 但是 relase run 或者 打包成 adhoc 安装，就无法访问这个IP了。 有一个现象， App Store 的app包 也是可以的。 我们的测试团队，iOS18+的设备就没几个，还不能内部测试了。请尽快联系我们，谢谢。

Hi all. Title says it all really. I have an app on MacOS that sends multicast UDP to multiple iOS devices. It shows realtime bar numbers of music played back by a playback software. It was all working until I tried a direct ethernet connection between Mac and phone - a scenario that would be quite common in the theatre world where machines dont have internet connection and people dont rely on wifi. How can I choose which interface my app sends the data through? Here is my connection function: func openConnection() { let params = NWParameters.udp params.allowLocalEndpointReuse = true params.includePeerToPeer = true let endpoint = NWEndpoint.hostPort(host: host, port: port) let conn = NWConnection(to: endpoint, using: params) self.connection = conn conn.stateUpdateHandler = { state in switch state { case .ready: print("Multicast connection ready to \(self.host)") UDPClient.console.log("Multicast connection ready to \(self.host)") case .failed(let error): print("Multicast connection failed: \(error)") default: break } } let udpQueue = DispatchQueue(label: "UDPClientQueue") conn.start(queue: udpQueue) } Thanks for any help in advance!

Hello there, Starting from iOS 18.4, support was included for QWAC Validation and QCStatements. Using the official QWAC Validator at: https://eidas.ec.europa.eu/efda/qwac-validation-tool I was able to check that the domain "eidas.ec.europa.eu" has a valid QWAC certificate. However, when trying to obtain the same result using the new API, I do not obtain the same result. Here is my sample playground code: import Foundation import Security import PlaygroundSupport PlaygroundPage.current.needsIndefiniteExecution = true @MainActor class CertificateFetcher: NSObject, URLSessionDelegate { private let url: URL init(url: URL) { self.url = url super.init() } func start() { let session = URLSession(configuration: .ephemeral, delegate: self, delegateQueue: nil) let task = session.dataTask(with: url) { data, response, error in if let error = error { print("Error during request: \(error)") } else { print("Request completed.") } } task.resume() } nonisolated func urlSession(_ session: URLSession, didReceive challenge: URLAuthenticationChallenge, completionHandler: @escaping (URLSession.AuthChallengeDisposition, URLCredential?) -&gt; Void) { guard let trust = challenge.protectionSpace.serverTrust else { completionHandler(.cancelAuthenticationChallenge, nil) return } if let certificates = SecTrustCopyCertificateChain(trust) as? [SecCertificate] { self.checkQWAC(certificates: certificates) } let credential = URLCredential(trust: trust) completionHandler(.useCredential, credential) } nonisolated func checkQWAC(certificates: [SecCertificate]) { let policy = SecPolicyCreateSSL(true, nil) var trust: SecTrust? guard SecTrustCreateWithCertificates(certificates as CFArray, policy, &amp;trust) == noErr, let trust else { print("Unable to create SecTrust") return } var error: CFError? guard SecTrustEvaluateWithError(trust, &amp;error) else { print("Trust evaluation failed") return } guard let result = SecTrustCopyResult(trust) as? [String : Any] else { print("No result dictionary") return } let qwacStatus = result[kSecTrustQWACValidation as String] let qcStatements = result[kSecTrustQCStatements as String] print("QWAC Status: \(String(describing: qwacStatus))") print("QC Statements: \(String(describing: qcStatements))") } } let url = URL(string: "https://eidas.ec.europa.eu/")! let fetcher = CertificateFetcher(url: url) fetcher.start() Which prints: QWAC Status: nil QC Statements: nil Request completed. Am I making a mistake while using the Security framework? I would greatly appreciate any help or guidance you can provide.

On one test machine, our extension wouldn't load, because [NETransparentProxyManager loadAllFromPreferencesWithCompletionHandler] can't find a manager, saying Skipping configuration appname because it is of the wrong type. This is the first time I've seen this behaviour. (The containing app tries to find a configuration, if it can't find it it creates one, then modifies whatever it found or created, then stores it. I don't have the right logging yet for that, so I can't see the error messages. [NSLog instead of os_log_error.])

Our app supports live streaming (RTSP, RTMP, WebRTC) functionality. After updating to the 18.5 Developer Beta version, we’ve encountered an issue where streaming over LTE is not working for customers using SKT (SK Telecom) as their carrier. Upon investigation, it seems that a similar issue might be occurring with a streaming service app called "SOOP." I would appreciate it if you could share any information regarding this bug. Thank you.

As a third-party application on Apple Watch, can it be located in the same LAN httpServer? Currently, when testing to initiate an http request in the LAN, the connection timeout is returned, code: -1001 self.customSession.request("http://10.15.48.191:9000/hello").response { response in switch response.result { case .success(let data): dlog("✅ 请求成功，收到数据：") if let html = String(data: data ?? Data(), encoding: .utf8) { dlog(html) } case .failure(let error): dlog("❌ 请求失败：\(error.localizedDescription)") } } 执行后报错 Task <B71BE820-FD0E-4880-A6DD-1F8F6EAF98B0>.<1> finished with error [-1001] Error Domain=NSURLErrorDomain Code=-1001 "请求超时。" UserInfo={_kCFStreamErrorCodeKey=-2102, _NSURLErrorFailingURLSessionTaskErrorKey=LocalDataTask <B71BE820-FD0E-4880-A6DD-1F8F6EAF98B0>.<1>, _NSURLErrorRelatedURLSessionTaskErrorKey=( "LocalDataTask <B71BE820-FD0E-4880-A6DD-1F8F6EAF98B0>.<1>", "LocalDataPDTask <B71BE820-FD0E-4880-A6DD-1F8F6EAF98B0>.<1>", "LocalDataTask <B71BE820-FD0E-4880-A6DD-1F8F6EAF98B0>.<1>" ), NSLocalizedDescription=请求超时。, _kCFStreamErrorDomainKey=4, NSErrorFailingURLStringKey=http://10.15.48.191:9000/hello, NSErrorFailingURLKey=http://10.15.48.191:9000/hello}

Hi! I recently had an idea to build an iOS app that allows users to create a system-level block of specified web domains by curating a "blacklist" on their device. If the user, for instance, inputs "*example.com" to their list, their iPhone would be blocked from relaying that network traffic to their ISP/DNS, and hence return an error message ("iPhone can't open the page because the address is invalid") instead of successfully fetching the response from example.com's servers. The overarching goal of this app would be to allow users to time-block their use of specified websites/apps and grant them greater agency over their technology consumption, and I thought that an app that blocks traffic at the network level, combined with the ability to control when to/not to allow access, would be a powerful alternative to the existing implementations out there that work more on the browser-level (eg. via Safari extension, which is isolated to the scope of user's Safari browser) or via Screen Time (which can be easy to bypass by inputting one's passcode). Another thing to mention is that since the app would serve as a local DNS proxy (instead of relying on a third party DNS resolver), none of their internet activity will be collected/transmitted off-device and be used for commercial purposes. I feel particularly driven to create a privacy-centered app in this way, since no user data needs to be harvested to implement this kind of filtering. I'd also love to get suggestions for a transparent privacy policy that respects users control over their device. With all this said, I found that the Network Extension APIs may be the only way that an app like this could be built on iOS and, I wanted to ask if the above-mentioned use case of Network Extension would be eligible to be granted access to its entitlement before I go ahead and purchase the $99/year Apple Developer Program membership. Happy to provide further information, and I'd also particularly be open to any mentions of existing solutions out there (since I might have missed some in my search). Maybe something like this already exists, in which case it'd be great to know in any case! :). Thank you so much in advance!

I was having a look through the documentation for NEPacketTunnelProvider, and wanted to know if it's possible for startTunnel(..) and stopTunnel(..) to run simultaneously, and thus require synchronization between resources they deal with? For example, if the VPN is toggled rapidly from system settings, could the setup that occurs in my startTunnel() definition (class instantiation and setTunnelNetworkSettings(value)) potentially occur after the tear-down logic (resource cleanup, setTunnelNetworkSettings(nil)), leaving the system in a state where the VPN is deactivated, but the configuration is in place?

Do we have clear document around multiple content filter applications running on single device.? While the documentation says 8 content filters and Only one filter available for system-wide use, there is no clear mention about below scenarios - Which content filter will get precedence? System-wide or App managed? Can there be mulitple Content filters configured for same managed application? Will all control provider running on the device get notified about network traffic ? I searched the forums to get a clear answer but seems older threads where nothing was conclusive. Thanks in advance for the help !!

I am in the middle of investigating an issue arising in the call to setsockopt syscall where it returns an undocumented and unexpected errno. As part of that, I'm looking for a way to list any socket content filters or any such extensions are in play on the system where this happens. To do that, I ran: systemextensionsctl list That retuns the following output: 0 extension(s) which seems to indicate there's no filters or extensions in play. However, when I do: netstat -s among other things, it shows: net_api: 2 interface filters currently attached 2 interface filters currently attached by OS 2 interface filters attached since boot 2 interface filters attached since boot by OS ... 4 socket filters currently attached 4 socket filters currently attached by OS 4 socket filters attached since boot 4 socket filters attached since boot by OS What would be the right command/tool/options that I could use to list all the socket filters/extensions (and their details) that are in use and applicable when a call to setsockopt is made from an application on that system? Edit: This is on a macosx-aarch64 with various different OS versions - 13.6.7, 14.3.1 and even 14.4.1.

Hey there! I’ve got some exciting news about Apple’s virtio_net_hdr implementation on macOS 15.4. It’s making communication a lot smoother, with a noticeable improvement! Now, I’d love to hear your thoughts on a couple of things. First, how do you think we can validate the populated values? And secondly, should we consider reusing populated values for the other endpoint, like the ‘flags’ field? Your insights would be invaluable!

We are implementing a connection between iPad and iPhone devices using LocalPushConnectivity, and have introduced SimplePushProvider into the project. We will have it switch between roles of Server and Client within a single project. ※ iPad will be Server and the iPhone will be Client. Communication between Server and Client is via TLS, with Server reading p12 file and Client setting public key. Currently, a TLS error code of "-9836" (invalid protocol version) is occurring when communicating from Client's SimplePushProvider to Server. I believe that Client is sending TLS1.3, and Server is set to accept TLS1.2 to 1.3. Therefore, I believe that the actual error is not due to TLS protocol version, but is an error that is related to security policy or TLS communication setting. Example: P12 file does not meet some requirement NWProtocolTLS.Options setting is insufficient etc... I'm not sure what the problem is, so please help. For reference, I will attach you implementation of TLS communication settings. P12 file is self-signed and was created by exporting it from Keychain Access. Test environment: iPad (OS: 16.6) iPhone (OS: 18.3.2) ConnectionOptions: TLS communication settings public enum ConnectionOptions { public enum TCP { public static var options: NWProtocolTCP.Options { let options = NWProtocolTCP.Options() options.noDelay = true options.enableFastOpen return options } } public enum TLS { public enum Error: Swift.Error { case invalidP12 case unableToExtractIdentity case unknown } public class Server { public let p12: URL public let passphrase: String public init(p12 url: URL, passphrase: String) { self.p12 = url self.passphrase = passphrase } public var options: NWProtocolTLS.Options? { guard let data = try? Data(contentsOf: p12) else { return nil } let pkcs12Options = [kSecImportExportPassphrase: passphrase] var importItems: CFArray? let status = SecPKCS12Import(data as CFData, pkcs12Options as CFDictionary, &amp;importItems) guard status == errSecSuccess, let items = importItems as? [[String: Any]], let importItemIdentity = items.first?[kSecImportItemIdentity as String], let identity = sec_identity_create(importItemIdentity as! SecIdentity) else { return nil } let options = NWProtocolTLS.Options() sec_protocol_options_set_min_tls_protocol_version(options.securityProtocolOptions, .TLSv12) sec_protocol_options_set_max_tls_protocol_version(options.securityProtocolOptions, .TLSv13) sec_protocol_options_set_local_identity(options.securityProtocolOptions, identity) sec_protocol_options_append_tls_ciphersuite(options.securityProtocolOptions, tls_ciphersuite_t.RSA_WITH_AES_128_GCM_SHA256) return options } } public class Client { public let publicKeyHash: String private let dispatchQueue = DispatchQueue(label: "ConnectionParameters.TLS.Client.dispatchQueue") public init(publicKeyHash: String) { self.publicKeyHash = publicKeyHash } // Attempt to verify the pinned certificate. public var options: NWProtocolTLS.Options { let options = NWProtocolTLS.Options() sec_protocol_options_set_min_tls_protocol_version(options.securityProtocolOptions, .TLSv12) sec_protocol_options_set_max_tls_protocol_version(options.securityProtocolOptions, .TLSv13) sec_protocol_options_set_verify_block( options.securityProtocolOptions, verifyClosure, dispatchQueue ) return options } private func verifyClosure( secProtocolMetadata: sec_protocol_metadata_t, secTrust: sec_trust_t, secProtocolVerifyComplete: @escaping sec_protocol_verify_complete_t ) { let trust = sec_trust_copy_ref(secTrust).takeRetainedValue() guard let serverPublicKeyData = publicKey(from: trust) else { secProtocolVerifyComplete(false) return } let keyHash = cryptoKitSHA256(data: serverPublicKeyData) guard keyHash == publicKeyHash else { // Presented certificate doesn't match. secProtocolVerifyComplete(false) return } // Presented certificate matches the pinned cert. secProtocolVerifyComplete(true) } private func cryptoKitSHA256(data: Data) -&gt; String { let rsa2048Asn1Header: [UInt8] = [ 0x30, 0x82, 0x01, 0x22, 0x30, 0x0d, 0x06, 0x09, 0x2a, 0x86, 0x48, 0x86, 0xf7, 0x0d, 0x01, 0x01, 0x01, 0x05, 0x00, 0x03, 0x82, 0x01, 0x0f, 0x00 ] let data = Data(rsa2048Asn1Header) + data let hash = SHA256.hash(data: data) return Data(hash).base64EncodedString() } private func publicKey(from trust: SecTrust) -&gt; Data? { guard let certificateChain = SecTrustCopyCertificateChain(trust) as? [SecCertificate], let serverCertificate = certificateChain.first else { return nil } let publicKey = SecCertificateCopyKey(serverCertificate) return SecKeyCopyExternalRepresentation(publicKey!, nil)! as Data } } } }

I have written an App which extracts data, over WiFi, from an instrument that creates its own WiFi Hotspot. The instrument provides no internet connection. The iPad version of this App is connects fine and is assigned an IP address by DHCP server running on a MicroChip RN171 wifi module. iOS assigns an obscure IP address on a completely different subnet. I understand this is iOS' way of "Complaining" that is wasn't assigned an IP address. Consequently in the case of the iPhone I am forced to manually assign an IP address for the iPhone, the mask and the gateway. Only then is the connection successful. Anyone know why the iPhone won't talk DHCP to a WiFi module not connected to the internet? Are there perhaps some parameters that I need to adjust on either the iPhone or WiFi module?