Since MacOS 26 Apple Music has inconsitent drops to the Quality of some Tracks indiscrimantly. I don't know if others Expereinced it. It doesn't happen on the Speakers or connected via Bluetooth, but the AUX I/O has it quite often. It is more noticable on Headphones with 48kHz and higher Frequency Bandwidth. Here is the FB18062589

I developed an educational app that implements audio-video communication through RTC, while using WebView to display course materials during classes. However, some users are experiencing an issue where the audio playback from WebView is very quiet. I've checked that the AVAudioSessionCategory is set by RTC to AVAudioSessionCategoryPlayAndRecord, and the AVAudioSessionCategoryOption also includes AVAudioSessionCategoryOptionMixWithOthers. What could be causing the WebView audio to be suppressed, and how can this be resolved?

I have sent in a feedback report (FB18222398) but I have no idea if anyone has looked at it. I know from past experiences that Apple devs do look at these forums. This applies to each of the betas, 1, 2 and 3. I have created a new Personal Voice with each beta. I create a personal voice in English. When it's done processing, I tap Preview and it says in English what is expected. But after some time, an hour or a day, the language of the voice file changes languages and no longer works properly. If I press Preview it is no longer intelligible. I have a text to speech app and initially the created voice works but then when the language of the file changes, it no longer works. I have run an app on my iphone through Xcode that prints to the console the voices installed on the device with the language. Currently this is the voice file: Voice Identifier: com.apple.speech.personalvoice.AAA9C6F2-9125-475F-BA2F-22C63274991D Language: es-MX and on a second device the same personal voice is in a different language: Voice Identifier: com.apple.speech.personalvoice.AAA9C6F2-9125-475F-BA2F-22C63274991D Language: zh-CN Although, a previous personal voice file that listed as Spanish-Mexican played in English with a Spanish accent or when playing Spanish text, it sounded almost perfect. This current personal voice doesn't do that, and is unintelligible. Previous attempts have converted to Chinese. I hope someone can look into this.

I’m developing a macOS audio monitoring app using AVAudioEngine, and I’ve run into a critical issue on macOS 26 beta where AVFoundation fails to detect any input devices, and AVAudioEngine.start() throws the familiar error 10877. FB#: FB19024508 Strange Behavior: AVAudioEngine.inputNode shows no channels or input format on bus 0. AVAudioEngine.start() fails with -10877 (AudioUnit connection error). AVCaptureDevice.DiscoverySession returns zero audio devices. Microphone permission is granted (authorized), and the app is properly signed and sandboxed with com.apple.security.device.audio-input. However, CoreAudio HAL does detect all input/output devices: Using AudioObjectGetPropertyDataSize and AudioObjectGetPropertyData with kAudioHardwarePropertyDevices, I can enumerate 14+ devices, including AirPods, USB DACs, and BlackHole. This suggests the lower-level audio stack is functional. I have tried: Resetting CoreAudio with sudo killall coreaudiod Rebuilding and re-signing the app Clearing TCC with tccutil reset Microphone Running on Apple Silicon and testing Rosetta/native detection via sysctl.proc_translated Using a fallback mechanism that logs device info from HAL and rotates logs for submission via Feedback Assistant I have submitted logs and a reproducible test case via Feedback Assitant : FB#: FB19024508]

My workout watch app supports audio playback during exercise sessions. When users carry both Apple Watch, iPhone, and AirPods, with AirPods connected to the iPhone, I want to route audio from Apple Watch to AirPods for playback. I've implemented this functionality using the following code. try? session.setCategory(.playback, mode: .default, policy: .longFormAudio, options: []) try await session.activate() When users are playing music on iPhone and trigger my code in the watch app, Apple Watch correctly guides users to select AirPods, pauses the iPhone's music, and plays my audio. However, when playback finishes and I end the session using the code below: try session.setActive(false, options:[.notifyOthersOnDeactivation]) the iPhone doesn't automatically resume the previously interrupted music playback—it requires manual intervention. Is this expected behavior, or am I missing other important steps in my code?

Dear Sirs, I’ve written a virtual audio driver based on AudioDriverKit and running as dext in my MacOS app. Sometimes when waking up from a sleep state the recording side of my driver extension seems to hang and I don’t see any calls to my io_operation callback. Then the recording app like a DAW seems to hang when trying to start a recording. This doesn’t happen after short sleep states or after a complete new start of my MacBook. I already opened a case in Feedback-Assistant on 5th of May (FB17503622) which also includes a sysdiagnose and a ktrace but I didn't get any feedback so far. Meanwhile some of our customers are getting angry and I'd like to know if there's anything I could do to fix this problem on my side. We’re not sure whether this worked in previous MacOS versions, we think we didn’t observe this before 15.3.1 but at least since 15.3.1. we’ve seen this problem. Best regards, Johannes

It sounds simple but searching for the name "Favorite Songs" is a non-starter because it's called different names in different countries, even if I specify "&l=en_us" on the query. So is there another property, relationship or combination thereof which I can use to tell me when I've found the right playlist? Properties I've looked at so far: canEdit: will always be false so narrows things down a little inFavorites: not helpful as it depends on whether the user has favourite the favourites playlist, so not relevant hasCatalog: seems always true so again may narrow things down a bit isPublic: doesn't help Adding the catalog relationship doesn't seem to show anything immediately useful either. Can anyone help? Ideally I'd like to see this as a "kind" or "type" as it has different properties to other playlists, but frankly I'll take anything at this point.

I ran 5.1 audio tests in both YouTube and Apple Music, and I noticed that when sound is supposed to play from the rear or front surround speakers, it’s also duplicated in the front left and right channels. I’m absolutely sure the issue is with the Apple TV, because I played the same video directly through my TV’s native system, and the channel separation was correct. Everything used to work perfectly before, so this must be a software issue. I’m currently on tvOS 26 Developer Beta 5, but I’m certain the problem also existed on the stable tvOS 18.5. I’ve already reset and updated my Apple TV, and I also tried switching the audio format to forced Dolby Atmos 5.1. On the forums, I mostly see complaints about Dolby Atmos not working at all — in my case, everything technically works, but not the way it’s supposed to.

I'm encountering errors while using AVAudioEngine with voice processing enabled (setVoiceProcessingEnabled(true)) in scenarios where the input and output audio devices are not the same. This issue arises specifically with mismatched devices, preventing the application from functioning as expected. Works: Paired devices (e.g., MacBook Pro mic → MacBook Pro speakers) Fails: Mismatched devices (e.g., AirPods mic → MacBook Pro speakers) When using paired input and output devices: The setup works as expected. Example: MacBook Pro microphone → MacBook Pro speakers. When using mismatched devices: AVAudioEngine setup fails during aggregate device construction. Example: AirPods microphone → MacBook Pro speakers. Error logs indicate a channel count mismatch. Here are the partial logs. Due to the content limit, I cannot post the entire logs. AUVPAggregate.cpp:1000 client-side input and output formats do not match (err=-10875) AUVPAggregate.cpp:1036 err=-10875 AVAEInternal.h:109 [AVAudioEngineGraph.mm:1344:Initialize: (err = PerformCommand(*outputNode, kAUInitialize, NULL, 0)): error -10875 AggregateDevice.mm:329 Failed expectation of constructed aggregate (312): mInput.streamChannelCounts == inputStreamChannelCounts AggregateDevice.mm:331 Failed expectation of constructed aggregate (312): mInput.totalChannelCount == std::accumulate(inputStreamChannelCounts.begin(), inputStreamChannelCounts.end(), 0U) AggregateDevice.mm:182 error fetching default pair AggregateDevice.mm:329 Failed expectation of constructed aggregate (336): mInput.streamChannelCounts == inputStreamChannelCounts AggregateDevice.mm:331 Failed expectation of constructed aggregate (336): mInput.totalChannelCount == std::accumulate(inputStreamChannelCounts.begin(), inputStreamChannelCounts.end(), 0U) AUHAL.cpp:1782 ca_verify_noerr: [AudioDeviceSetProperty(mDeviceID, NULL, 0, isInput, kAudioDevicePropertyIOProcStreamUsage, theSize, theStreamUsage), 560227702] AudioHardware-mac-imp.cpp:3484 AudioDeviceSetProperty: no device with given ID AUHAL.cpp:1782 ca_verify_noerr: [AudioDeviceSetProperty(mDeviceID, NULL, 0, isInput, kAudioDevicePropertyIOProcStreamUsage, theSize, theStreamUsage), 560227702] AggregateDevice.mm:182 error fetching default pair AggregateDevice.mm:329 Failed expectation of constructed aggregate (348): mInput.streamChannelCounts == inputStreamChannelCounts AggregateDevice.mm:331 Failed expectation of constructed aggregate (348): mInput.totalChannelCount == std::accumulate(inputStreamChannelCounts.begin(), inputStreamChannelCounts.end(), 0U) Is it possible to use voice processing with different input/output devices? If yes, are there any specific configurations required to handle mismatched devices? How can we resolve channel count mismatch errors during aggregate device construction? Are there settings or API adjustments to enforce compatibility between input/output devices? Are there any workarounds or alternative approaches to achieve voice processing functionality with mismatched devices? For instance, can we force an intermediate channel configuration or downmix input/output formats?

Using the official SwiftTranscriptionSampleApp from WWDC 2025, speech transcription takes 14+ seconds from audio input to first result, making it unusable for real-time applications. Environment iOS: 26.0 Beta Xcode: Beta 5 Device: iPhone 16 pro Sample App: Official Apple SwiftTranscriptionSampleApp from WWDC 2025 Configuration Tested Locale: en-US (properly allocated with AssetInventory.allocate(locale:)) and es-ES Setup: All optimizations applied (preheating, high priority, model retention) I started testing in my own app to replace SFSpeech API and include speech detection but after long fights with documentation (this part is quite terrible TBH) I tested the example (https://developer.apple.com/documentation/speech/bringing-advanced-speech-to-text-capabilities-to-your-app) and saw same results. I added some logs to check the specific time: 🎙️ [20:30:41.532] ✅ Analyzer started successfully - ready to receive audio! 🎙️ [20:30:41.532] Listening for transcription results... 🎙️ [20:30:56.342] 🚀 FIRST TRANSCRIPTION RESULT after 14.810s: 'Hello' (isFinal: false) Questions Is this expected performance for iOS 26 Beta, because old SFSpeech is far faster? Are there additional optimization steps for SpeechTranscriber? Should we expect significant performance improvements in later betas?

ApplicationMusicPlayer is not available on watchOS but all other platforms. Is there a technical reason for that like battery life? Same goes for SystemMusicPlayer and MPMusicPlayerController. I already filed feedbacks for that.

After updating to iOS 18.5, we’ve observed that outgoing audio from our app intermittently stops being transmitted during VoIP calls using AVAudioSession configured with .playAndRecord and .voiceChat. The session is set active without errors, and interruptions are handled correctly, yet audio capture suddenly ceases mid-call. This was not observed in earlier iOS versions (≤ 18.4). We’d like to confirm if there have been any recent changes in AVAudioSession, CallKit, or related media handling that could affect audio input behavior during long-running calls. func configureForVoIPCall() throws { try setCategory( .playAndRecord, mode: .voiceChat, options: [.allowBluetooth, .allowBluetoothA2DP, .defaultToSpeaker]) try setActive(true) }

When using the [AVAudioSession setCategory:withOptions:error:] API, the call hangs for a long time and eventually returns an error.This issue occurs on iOS 16, and did not appear in earlier versions. Thread 135: 0 libsystem_kernel.dylib 0x00000002478e3cd4 _mach_msg2_trap :8 (in libsystem_kernel.dylib) 1 libsystem_kernel.dylib 0x00000002478e7214 _mach_msg_overwrite :428 (in libsystem_kernel.dylib) 2 libsystem_kernel.dylib 0x00000002478e705c _mach_msg :24 (in libsystem_kernel.dylib) 3 libdispatch.dylib 0x00000001d63ffe84 __dispatch_mach_send_and_wait_for_reply :548 (in libdispatch.dylib) 4 libdispatch.dylib 0x00000001d6400224 _dispatch_mach_send_with_result_and_wait_for_reply :60 (in libdispatch.dylib) 5 libxpc.dylib 0x00000001b2114e04 _xpc_connection_send_message_with_reply_sync :256 (in libxpc.dylib) 6 Foundation 0x000000019b6249f0 ___NSXPCCONNECTION_IS_WAITING_FOR_A_SYNCHRONOUS_REPLY__ :16 (in Foundation) 7 Foundation 0x000000019c06d1b4 -[NSXPCConnection _sendInvocation:orArguments:count:methodSignature:selector:withProxy:] :2100 (in Foundation) 8 CoreFoundation 0x000000019dfcb1cc ____forwarding___ :1072 (in CoreFoundation) 9 CoreFoundation 0x000000019dfd3200 ___forwarding_prep_0___ :96 (in CoreFoundation) 10 AudioSession 0x00000001c77498b0 __ZN4avas6client11SessionCore10HandlePingEv :192 (in AudioSession) 11 AudioSession 0x00000001c77497b0 ____ZN4avas6client11SessionCore12DispatchPingEv_block_invoke :52 (in AudioSession) 12 libdispatch.dylib 0x00000001d63e4adc __dispatch_call_block_and_release :32 (in libdispatch.dylib) 13 libdispatch.dylib 0x00000001d63fe7ec __dispatch_client_callout :16 (in libdispatch.dylib) 14 libdispatch.dylib 0x00000001d63ed468 __dispatch_lane_serial_drain :740 (in libdispatch.dylib) 15 libdispatch.dylib 0x00000001d63edf78 __dispatch_lane_invoke :440 (in libdispatch.dylib) 16 libdispatch.dylib 0x00000001d63f6f48 __dispatch_root_queue_drain :364 (in libdispatch.dylib) 17 libdispatch.dylib 0x00000001d63f6d08 __dispatch_worker_thread :268 (in libdispatch.dylib) 18 libsystem_pthread.dylib 0x00000001f9ff144c __pthread_start :136 (in libsystem_pthread.dylib) 19 libsystem_pthread.dylib 0x00000001f9fed8cc _thread_start :8 (in libsystem_pthread.dylib) Thread 132: 0 libsystem_kernel.dylib 0x00000002478e3cd4 _mach_msg2_trap :8 (in libsystem_kernel.dylib) 1 libsystem_kernel.dylib 0x00000002478e7214 _mach_msg_overwrite :428 (in libsystem_kernel.dylib) 2 libsystem_kernel.dylib 0x00000002478e705c _mach_msg :24 (in libsystem_kernel.dylib) 3 libdispatch.dylib 0x00000001d63ffe84 __dispatch_mach_send_and_wait_for_reply :548 (in libdispatch.dylib) 4 libdispatch.dylib 0x00000001d6400224 _dispatch_mach_send_with_result_and_wait_for_reply :60 (in libdispatch.dylib) 5 libxpc.dylib 0x00000001b2114e04 _xpc_connection_send_message_with_reply_sync :256 (in libxpc.dylib) 6 Foundation 0x000000019b6249f0 ___NSXPCCONNECTION_IS_WAITING_FOR_A_SYNCHRONOUS_REPLY__ :16 (in Foundation) 7 Foundation 0x000000019c06d1b4 -[NSXPCConnection _sendInvocation:orArguments:count:methodSignature:selector:withProxy:] :2100 (in Foundation) 8 CoreFoundation 0x000000019dfcb1cc ____forwarding___ :1072 (in CoreFoundation) 9 CoreFoundation 0x000000019dfd3200 ___forwarding_prep_0___ :96 (in CoreFoundation) 10 AudioSession 0x00000001c7754198 __ZNK4avas6client11SessionCore18SetBatchPropertiesEP12NSDictionaryIP8NSStringPU25objcproto14NSSecureCoding11objc_objectEPU15__autoreleasingP7NSArrayIPS2_IS4_P8NSNumberEENS_30AVAudioSessionBatchSetStrategyEbb :548 (in AudioSession) 11 AudioSession 0x00000001c7753e58 __ZNK4avas6client11SessionCore20SetBatchPropertiesMXEP12NSDictionaryIP8NSStringPU25objcproto14NSSecureCoding11objc_objectE :92 (in AudioSession) 12 AudioSession 0x00000001c775179c __ZN4avas6client11SessionCore11setCategoryEP8NSStringS3_32AVAudioSessionRouteSharingPolicym :472 (in AudioSession) 13 AudioSession 0x00000001c7768f88 -[AVAudioSession setCategory:withOptions:error:] :68 (in AudioSession) 14 AlipayWallet 0x000000010140580c -[AVAudioSession(APMHook) apmhook_setCategory:withOptions:error:] APMHookAudioSession.m:35 (in AlipayWallet) 15 AlipayWallet 0x00000001014001a4 -[APMAudioSessionManager resume] APMAudioSessionManager.m:718 (in AlipayWallet) 16 libdispatch.dylib 0x00000001d63e4adc __dispatch_call_block_and_release :32 (in libdispatch.dylib) 17 libdispatch.dylib 0x00000001d63fe7ec __dispatch_client_callout :16 (in libdispatch.dylib) 18 libdispatch.dylib 0x00000001d63ed468 __dispatch_lane_serial_drain :740 (in libdispatch.dylib) 19 libdispatch.dylib 0x00000001d63edf44 __dispatch_lane_invoke :388 (in libdispatch.dylib) 20 libdispatch.dylib 0x00000001d63f83ec __dispatch_root_queue_drain_deferred_wlh :292 (in libdispatch.dylib) 21 libdispatch.dylib 0x00000001d63f7ce4 __dispatch_workloop_worker_thread :692 (in libdispatch.dylib) 22 libsystem_pthread.dylib 0x00000001f9fee3b8 __pthread_wqthread :292 (in libsystem_pthread.dylib) 23 libsystem_pthread.dylib 0x00000001f9fed8c0 _start_wqthread :8 (in libsystem_pthread.dylib)

Hi, I am creating an app that can include videos or images in it's data. While @Attribute(.externalStorage) helps with images, with AVAssets I actually would like access to the URL behind that data. (as it would be stupid to load and then save the data again just to have a URL) One key component is to keep all of this clean enough so that I can use (private) CloudKit syncing with the resulting model. All the best Christoph

Radio stations are currently not supported by the MusicKit SDK for Android. The SDK has not been updated for years now. It lacks pretty big features of Apple Music

Hello, I'm observing an intermittent memory leak being reported in the iOS Simulator when initializing and starting an AVAudioEngine. Even with minimal setup—just attaching a single AVAudioPlayerNode and connecting it to the mainMixerNode—Xcode's memory diagnostics and Instruments sometimes flag a leak. Here is a simplified version of the code I'm using: // This function is called when the user taps a button in the view controller: #import "ViewController.h" @interface ViewController () @end @implementation ViewController - (void)viewDidLoad { [super viewDidLoad]; } - (IBAction)myButtonAction:(id)sender { NSLog(@"Test"); soundCreate(); } @end // media.m static AVAudioEngine *audioEngine = nil; void soundCreate(void) { if (audioEngine != nil) return; [[AVAudioSession sharedInstance] setCategory:AVAudioSessionCategoryAmbient error:nil]; [[AVAudioSession sharedInstance] setActive:YES error:nil]; audioEngine = [[AVAudioEngine alloc] init]; AVAudioPlayerNode* playerNode = [[AVAudioPlayerNode alloc] init]; [audioEngine attachNode:playerNode]; [audioEngine connect:playerNode to:(AVAudioNode *)[audioEngine mainMixerNode] format:nil]; [audioEngine startAndReturnError:nil]; } In the memory leak report, the following call stack is repeated, seemingly in a loop: ListenerMap::InsertEvent(XAudioUnitEvent const&, ListenerBinding*) AudioToolboxCore ListenerMap::AddParameter(AUListener*, void*, XAudioUnitEvent const&) AudioToolboxCore AUListenerAddParameter AudioToolboxCore addOrRemoveParameterListeners(OpaqueAudioComponentInstance*, AUListenerBase*, AUParameterTree*, bool) AudioToolboxCore 0x180178ddf

Is it possible to find IDR frame (CMSampleBuffer) in AVAsset h264 video file?

I’m seeing what appears to be an iOS audio-session issue that occurs only when a phone call happens while the app is in the background. API: AVAudioSession, AVAudioRecorder Background Modes: Audio enabled (UIBackgroundModes = audio) Category: .playAndRecord Microphone permission: granted Expected Behavior If the app is recording audio in the background and a phone call interrupts it: AVAudioSession.interruptionNotification(.began) fires Call ends AVAudioSession.interruptionNotification(.ended) fires App should be able to re-activate its audio session and resume or restart recording Apple documentation suggests this should be supported for background audio apps. Actual Behavior When the app is in the background and phone call is ended: AVAudioSession.interruptionNotification(.ended) does fire Attempting to reactivate the audio session always fails: Error Domain=NSOSStatusErrorDomain Code=560557684 ("!int") "Session activation failed" The session appears to remain permanently “interrupted” Retrying activation (with delays) does not help Recreating AVAudioRecorder does not help Reactivation works only after the app is opened again

I have a new 2725QC (Dell) Monitor that uses USB-C connection to connect with the iMac (2019, 27 inch) through the back port but the problem is that the volume control can currently only be done from the hardware, not the software control using the Apple keyboard. What should I do in terms of writing code to do this (Swift or Obj-C)? Is there a third-party solution for Intel iMac and ARM Mac?

A bit of a novice to app development here but I have a paid developer account, I have registered the identifier for MusicKit on the developer website (using the bundle identifier I've selected in Xcode) but the option to add MusicKit as a capability is not available in Xcode? I've manually updated the certificates, closed the app and reopened it, started a new project and tried with a different demo project? Apologies if I am missing something obvious but could someone help me get this capability added?