After update,WeChat voice chatting no sounds, please help

【溦N51888M】腾龙公司会员申请流程步骤【罔纸 211239.com 】输入官惘到浏览器打开联系24小时在线业务人员办理上下，打开公司官网. 二、点击主页右上角注册按钮. 三、填写账号信息. 四、输入手机号，验证码，密码. 五、勾选用户协议，完成注册协议，完成注册. 注意：若出现账号已存在」提示，需重新设置唯一账号名称

Hello! I'm experiencing an issue with iOS's audio routing system when trying to use Bluetooth headphones for audio output while also recording environmental audio from the built-in microphone. Desired behavior: Play audio through Bluetooth headset (AirPods) Record unprocessed environmental audio from the iPhone's built-in microphone Actual behavior: When explicitly selecting the built-in microphone, iOS reports it's using it (in currentRoute.inputs) However, the actual audio data received is clearly still coming from the AirPods microphone The audio is heavily processed with voice isolation/noise cancellation, removing environmental sounds Environment Details Device: iPhone 12 Pro Max iOS Version: 18.4.1 Hardware: AirPods Audio Framework: AVAudioEngine (also tried AudioQueue) Code Attempted I've tried multiple approaches to force the correct routing: func configureAudioSession() { let session = AVAudioSession.sharedInstance() // Configure to allow Bluetooth output but use built-in mic try? session.setCategory(.playAndRecord, options: [.allowBluetoothA2DP, .defaultToSpeaker]) try? session.setActive(true) // Explicitly select built-in microphone if let inputs = session.availableInputs, let builtInMic = inputs.first(where: { $0.portType == .builtInMic }) { try? session.setPreferredInput(builtInMic) print("Selected input: \(builtInMic.portName)") } // Log the current route let route = session.currentRoute print("Current input: \(route.inputs.first?.portName ?? "None")") // Configure audio engine with native format let inputNode = audioEngine.inputNode let nativeFormat = inputNode.inputFormat(forBus: 0) inputNode.installTap(onBus: 0, bufferSize: 1024, format: nativeFormat) { buffer, time in // Process audio buffer // Despite showing "Built-in Microphone" in route, audio appears to be // coming from AirPods with voice isolation applied - welp! } try? audioEngine.start() } I've also tried various combinations of: Different audio session modes (.default, .measurement, .voiceChat) Different option combinations (with/without .allowBluetooth, .allowBluetoothA2DP) Setting session.setPreferredInput() both before and after activation Diagnostic Observations When AirPods are connected: AVAudioSession.currentRoute.inputs correctly shows "Built-in Microphone" after setPreferredInput() The actual audio data received shows clear signs of AirPods' voice isolation processing Background/environmental sounds are actively filtered out... When recording a test audio played near the phone (not through the app), the recording is nearly silent. Only headset voice goes through. Questions Is there a workaround to force iOS to actually use the built-in microphone while maintaining Bluetooth output? Are there any lower-level configurations that might resolve this issue? Any insights, workarounds, or suggestions would be greatly appreciated. This is blocking a critical feature in my application that requires environmental audio recording while providing audio feedback through headphones 😅

On macOS Sequoia, I'm having the hardest time getting this basic audio output to work correctly. I'm compiling in XCode using C99, and when I run this, I get audio for a split second, and then nothing, indefinitely. Any ideas what could be going wrong? Here's a minimum code example to demonstrate: #include <AudioToolbox/AudioToolbox.h> #include <stdint.h> #define RENDER_BUFFER_COUNT 2 #define RENDER_FRAMES_PER_BUFFER 128 // mono linear PCM audio data at 48kHz #define RENDER_SAMPLE_RATE 48000 #define RENDER_CHANNEL_COUNT 1 #define RENDER_BUFFER_BYTE_COUNT (RENDER_FRAMES_PER_BUFFER * RENDER_CHANNEL_COUNT * sizeof(f32)) void RenderAudioSaw(float* outBuffer, uint32_t frameCount, uint32_t channelCount) { static bool isInverted = false; float scalar = isInverted ? -1.f : 1.f; for (uint32_t frame = 0; frame < frameCount; ++frame) { for (uint32_t channel = 0; channel < channelCount; ++channel) { // series of ramps, alternating up and down. outBuffer[frame * channelCount + channel] = 0.1f * scalar * ((float)frame / frameCount); } } isInverted = !isInverted; } AudioStreamBasicDescription coreAudioDesc = { 0 }; AudioQueueRef coreAudioQueue = NULL; AudioQueueBufferRef coreAudioBuffers[RENDER_BUFFER_COUNT] = { NULL }; void coreAudioCallback(void* unused, AudioQueueRef queue, AudioQueueBufferRef buffer) { // 0's here indicate no fancy packet magic AudioQueueEnqueueBuffer(queue, buffer, 0, 0); } int main(void) { const UInt32 BytesPerSample = sizeof(float); coreAudioDesc.mSampleRate = RENDER_SAMPLE_RATE; coreAudioDesc.mFormatID = kAudioFormatLinearPCM; coreAudioDesc.mFormatFlags = kLinearPCMFormatFlagIsFloat | kLinearPCMFormatFlagIsPacked; coreAudioDesc.mBytesPerPacket = RENDER_CHANNEL_COUNT * BytesPerSample; coreAudioDesc.mFramesPerPacket = 1; coreAudioDesc.mBytesPerFrame = RENDER_CHANNEL_COUNT * BytesPerSample; coreAudioDesc.mChannelsPerFrame = RENDER_CHANNEL_COUNT; coreAudioDesc.mBitsPerChannel = BytesPerSample * 8; coreAudioQueue = NULL; OSStatus result; // most of the 0 and NULL params here are for compressed sound formats etc. result = AudioQueueNewOutput(&coreAudioDesc, &coreAudioCallback, NULL, 0, 0, 0, &coreAudioQueue); if (result != noErr) { assert(false == "AudioQueueNewOutput failed!"); abort(); } for (int i = 0; i < RENDER_BUFFER_COUNT; ++i) { uint32_t bufferSize = coreAudioDesc.mBytesPerFrame * RENDER_FRAMES_PER_BUFFER; result = AudioQueueAllocateBuffer(coreAudioQueue, bufferSize, &(coreAudioBuffers[i])); if (result != noErr) { assert(false == "AudioQueueAllocateBuffer failed!"); abort(); } } for (int i = 0; i < RENDER_BUFFER_COUNT; ++i) { RenderAudioSaw(coreAudioBuffers[i]->mAudioData, RENDER_FRAMES_PER_BUFFER, RENDER_CHANNEL_COUNT); coreAudioBuffers[i]->mAudioDataByteSize = coreAudioBuffers[i]->mAudioDataBytesCapacity; AudioQueueEnqueueBuffer(coreAudioQueue, coreAudioBuffers[i], 0, 0); } AudioQueueStart(coreAudioQueue, NULL); sleep(10); // some time to hear the audio AudioQueueStop(coreAudioQueue, true); AudioQueueDispose(coreAudioQueue, true); return 0; }

I'm working in Swift/SwiftUI, running XCode 16.3 on macOS 15.4 and I've seen this when running in the iOS simulator and in a macOS app run from XCode. I've also seen this behaviour with 3 different audio files. Nothing in the documentation says that the speechRecognitionMetadata property on an SFSpeechRecognitionResult will be nil until isFinal, but that's the behaviour I'm seeing. I've stripped my class down to the following: private var isAuthed = false // I call this in a .task {} in my SwiftUI View public func requestSpeechRecognizerPermission() { SFSpeechRecognizer.requestAuthorization { authStatus in Task { self.isAuthed = authStatus == .authorized } } } public func transcribe(from url: URL) { guard isAuthed else { return } let locale = Locale(identifier: "en-US") let recognizer = SFSpeechRecognizer(locale: locale) let recognitionRequest = SFSpeechURLRecognitionRequest(url: url) // the behaviour occurs whether I set this to true or not, I recently set // it to true to see if it made a difference recognizer?.supportsOnDeviceRecognition = true recognitionRequest.shouldReportPartialResults = true recognitionRequest.addsPunctuation = true recognizer?.recognitionTask(with: recognitionRequest) { (result, error) in guard result != nil else { return } if result!.isFinal { //speechRecognitionMetadata is not nil } else { //speechRecognitionMetadata is nil } } } } Further, and this isn't documented either, the SFTranscriptionSegment values don't have correct timestamp and duration values until isFinal. The values aren't all zero, but they don't align with the timing in the audio and they change to accurate values when isFinal is true. The transcription otherwise "works", in that I get transcription text before isFinal and if I wait for isFinal the segments are correct and speechRecognitionMetadata is filled with values. The context here is I'm trying to generate a transcription that I can then highlight the spoken sections of as audio plays and I'm thinking I must be just trying to use the Speech framework in a way it does not work. I got my concept working if I pre-process the audio (i.e. run it through until isFinal and save the results I need to json), but being able to do even a rougher version of it 'on the fly' - which requires segments to have the right timestamp/duration before isFinal - is perhaps impossible?

I develop a application with an uvc camera, this camera is a webcam, I use the AVFoundation library ,but when I run the code "[self.mCaptureSession startRunning]" ,I can not get the buffer, I already set the delegate, any answer will help.

Environment Device: iPhone 16e iOS Version: 18.4.1 - 18.7.1 Framework: AVFoundation (AVAudioEngine) Problem Summary On iPhone 16e (iOS 18.4.1-18.7.1), the installTap callback stops being invoked after resuming from a phone call interruption. This issue is specific to phone call interruptions and does not occur on iPhone 14, iPhone SE 3, or earlier devices. Expected Behavior After a phone call interruption ends and audioEngine.start() is called, the previously installed tap should continue receiving audio buffers. Actual Behavior After resuming from phone call interruption: Tap callback is no longer invoked No audio data is captured No errors are thrown Engine appears to be running normally Note: Normal pause/resume (without phone call interruption) works correctly. Steps to Reproduce Start audio recording on iPhone 16e Receive or make a phone call (triggers AVAudioSession interruption) End the phone call Resume recording with audioEngine.start() Result: Tap callback is not invoked Tested devices: iPhone 16e (iOS 18.4.1-18.7.1): Issue reproduces ✗ iPhone 14 (iOS 18.x): Works correctly ✓ iPhone SE 3 (iOS 18.x): Works correctly ✓ Code Initial Setup (Works) let inputNode = audioEngine.inputNode inputNode.installTap(onBus: 0, bufferSize: 4096, format: nil) { buffer, time in self.processAudioBuffer(buffer, at: time) } audioEngine.prepare() try audioEngine.start() Interruption Handling NotificationCenter.default.addObserver( forName: AVAudioSession.interruptionNotification, object: AVAudioSession.sharedInstance(), queue: nil ) { notification in guard let userInfo = notification.userInfo, let typeValue = userInfo[AVAudioSessionInterruptionTypeKey] as? UInt, let type = AVAudioSession.InterruptionType(rawValue: typeValue) else { return } if type == .began { self.audioEngine.pause() } else if type == .ended { try? self.audioSession.setActive(true) try? self.audioEngine.start() // Tap callback doesn't work after this on iPhone 16e } } Workaround Full engine restart is required on iPhone 16e: func resumeAfterInterruption() { audioEngine.stop() inputNode.removeTap(onBus: 0) inputNode.installTap(onBus: 0, bufferSize: 4096, format: nil) { buffer, time in self.processAudioBuffer(buffer, at: time) } audioEngine.prepare() try audioSession.setActive(true) try audioEngine.start() } This works but adds latency and complexity compared to simple resume. Questions Is this expected behavior on iPhone 16e? What is the recommended way to handle phone call interruptions? Why does this only affect iPhone 16e and not iPhone 14 or SE 3? Any guidance would be appreciated!

Hello. To determine wether "AVB/EAV Mode" of a AV-capable network interfaces is turned on or off I query the IO registry and evaluate the property "AVBControllerState". I was wondering if this is the "correct" approach and if there is anything known about the values for this property? Network interfaces without AV capability may also carry this property (e.g.: for my WiFi adapter the value of 1) whereas the value for interfaces with AV capability can be 0 and 3. At least as far as I could observe with my limited amount of test devices at hand. Is it safe to assume that a value of 3 means this feature is turned on, 0 that it is turned off and ignore values of 1? Is there another approach to get to know the status of the "AVB/EAV Mode"? Thanks for any insight. Best regards, Ingo

I'm developing an iOS app that requires continuous audio recording. Currently, when a phone call comes in, the AVAudioSession is interrupted and recording stops completely during the ringing phase. While I understand recording should stop if the call is answered, my app needs to continue recording while the phone is merely ringing. I've observed that Apple's Voice Memos app maintains recording during incoming call rings. This indicates the hardware and iOS are capable of supporting this functionality. Request Please advise on any available AVAudioSession configurations or APIs that would allow my app to: Continue recording during an incoming call ring Only stop recording if/when the call is actually answered Impact This interruption significantly impacts the user experience and core functionality of my app. Workarounds like asking users to enable airplane mode are impractical and create a poor user experience. Questions Is there an approved way to maintain microphone access during call rings? If not currently possible, could this capability be considered for addition to a future iOS SDK? Are there any interim solutions or best practices Apple recommends for this use case? Thank you for your help. SUPPORT INFORMATION Did someone from Apple ask you to submit a code-level support request? No Do you have a focused test project that demonstrates your issue? Yes, I have a focused test project to submit with my request What code level support issue are you having? Problems with an Apple framework API in my app

I'm working on adding Spatial Audio support to a game on the Mac. I'm looking at the SpatialAudioRenderer sample but having some issues. It's unclear to me when a device is compatible with Spatial Audio and when I should attempt to render Spatial Audio. There is no property that I can find on the Mac that advertises Spatial Audio compatibility on a device. The sample crashes when the output device is a USB device. This includes the Apple Studio Display. The Apple Studio Display is supposed to be capable of rendering Spatial Audio. The device doesn't work with the sample - do I still need to render down the 7.1.4 source on this device? The sample always renders down to Stereo, but the Apple Studio Display is not a Stereo device. I'm a bit confused by the sample and when/how I should configure the mixing unit.

I’m running HomePod OS 26 on two HomePod minis and OS 18.6 on main HomePod (original) I’ve enabled Crossfade in the Home app. I’m playing Apple Music directly in the HomePod mini. Crossfade just doesn’t work on any HomePod. I can understand it not working on the HomePod - but why isn’t it working on the minis running OS 26? I’ve tried disabling and enabling Crossfade, rebooting HomePods etc but nothing?!

I created a virtual audio device to capture system audio with a sample rate of 44.1 kHz. After capturing the audio, I forward it to the hardware sound card using AVAudioEngine, also with a sample rate of 44.1 kHz. However, due to the clock sources being unsynchronized, problems occur after a period of playback. How can I retrieve the clock source of the hardware device and set it for the virtual device?

I have an app that displays artwork via MPMediaItem.artwork, requesting an image with a specific size. How do I get a media item's MPMediaItemAnimatedArtwork, and how to get the preview image and video to display to the user?

Hello everyone, I'm implementing the new AVInputPickerInteraction API on iOS 26 to allow users to select their microphone from a custom settings menu before recording. The implementation seems correct, but I'm encountering a strange issue where the input selection immediately reverts to the previous device. The Situation: The picker is presented correctly via a manual call to .present(). I can see all available inputs (e.g., "iPhone Microphone" and "AirPods"). The current input is "iPhone Microphone". I tap on "AirPods". The UI updates to show "AirPods" as selected for a fraction of a second, then immediately jumps back to "iPhone Microphone". The same thing happens in reverse. It seems like the system is automatically reverting the audio route change requested by the picker. My Implementation: My setup follows the standard pattern discussed in the WWDC sessions. Setup Code: This setup is performed once before the user can trigger the picker. @available(iOS 26.0, *) var inputPickerInteraction: AVInputPickerInteraction? // Note: The AVAudioSession is configured to .playAndRecord // and set to active elsewhere in the code before this setup is called. if #available(iOS 26.0, *) { // Setup the picker let picker = AVInputPickerInteraction() self.inputPickerInteraction = picker self.view.addInteraction(picker) // Added to establish context } Presentation Code: When a user selects "Change Input" from my custom settings menu, I call .present() on the main thread. // In a delegate method from a custom menu if #available(iOS 26.0, *) { DispatchQueue.main.async { self.inputPickerInteraction?.present(animated: true) } } What I've already checked: The AVAudioSession is active and its category is .playAndRecord. The inputPickerInteraction object is not nil. The .present() method is being called on the main thread. The picker is added to a view using view.addInteraction() in the setup phase. I've reviewed my code to ensure there is no other logic that could be manually resetting the AVAudioSession's preferred input. Has anyone else experienced this behavior? I suspect this might be a bug in the new API, but I want to make sure I'm not missing a crucial step in managing the AVAudioSession state. Any insights or potential workarounds would be greatly appreciated. Thank you.

Hello everyone, I've written an audio unit plugin that needs to be aware of any upstream latency caused by heavy plugins before it on the channel. Is there any way to query this? I know that Logic applies PDC at the channel's output (summing point), but I need to know what the accumulated latency is at the point the audio enters my plugin. Thanks!

We require assistance in resolving a critical audio design conflict within our Push-to-Talk (PTT) application. Our current volume amplification strategy—which relies on applying a GAIN factor to PCM samples in conjunction with setting the AVAudioSession category to Playback—is working successfully when PTT is used independently. However, upon integrating and reporting the same PTT call through the CallKit framework, this amplification effect is lost. The CallKit integration appears to be forcing a different, non-amplifying audio session category or configuration, negatively impacting the user's perceived call volume. We need guidance on how to maintain the AVAudioSessionCategoryPlayback setting, or an equivalent high-volume configuration, while operating under the control of CallKit.

Is there a way to permanently disable PHASE SDK logging? It seems to be a lot chattier than Apple's other SDKs. While developing a RealityKit app that uses AudioPlaybackController, I must manually hide the PHASE SDK log output several times each day so I can see my app's log messages. Thank you.

I'm encountering numerous crashes involving the com.apple.coreaudio.AQClient thread on our application. The crash details are as follows: #10 com.apple.coreaudio.AQClient SIGSEGV SEGV_ACCERR 0 libobjc.A.dylib _objc_msgSend + 44 1 AudioToolbox ClientMessageHandler::PropertyChanged(unsigned int) + 872 2 AudioToolbox ClientAudioQueue::FetchAndDeliverPendingCallbacks(unsigned int) + 924 3 AudioToolbox __XCallbackNotificationsAvailable + 212 4 libAudioToolboxUtility.dylib _mshMIGPerform + 260 5 CoreFoundation ___CFRUNLOOP_IS_CALLING_OUT_TO_A_SOURCE1_PERFORM_FUNCTION__ + 56 6 CoreFoundation ___CFRunLoopDoSource1 + 596 7 CoreFoundation ___CFRunLoopRun + 2392 8 CoreFoundation _CFRunLoopRunSpecific + 572 9 AudioToolbox CADeprecated::GenericRunLoopThread::Entry(void*) + 156 10 libAudioToolboxUtility.dylib CADeprecated::CAPThread::Entry(CADeprecated::CAPThread*) + 88 11 libsystem_pthread.dylib __pthread_start + 116 All these crashes occur on system versions below iOS/iPadOS 17, primarily when the device's available RAM is low. What steps can I take to resolve this issue? Any insights would be greatly appreciated!

I've tried SpeechTranscriber with a lot of my devices (from iPhone 12 series ~ iPhone 17 series) without issues. However, SpeechTranscriber.isAvailable value is false for my iPhone 11 Pro. https://developer.apple.com/documentation/speech/speechtranscriber/isavailable I'am curious why the iPhone 11 Pro device is not supported. Are all iPhone 11 series not supported intentionally? Or is there any problem with my specific device? I've also checked the supportedLocales, and the value is an empty array. https://developer.apple.com/documentation/speech/speechtranscriber/supportedlocales

The sysEx struct in the MIDIUniversalMessage struct has a channel member but the System Exclusive (7-Bit) Message doesn't have a channel field. The System Exclusive (7-Bit) Message has a # of bytes field but the sysEx struct doesn't have a nrOfBytes, byteCount or bytesUsed member. It looks like the channel member of the sysEx struct contains the number of used bytes. Is this a mistake in the header or did I misunderstand something?