Delve into the world of built-in app and system services available to developers. Discuss leveraging these services to enhance your app's functionality and user experience.

Posts under General subtopic

Post

Replies

Boosts

Views

Created

LibXML2 parsing whitespace and line breaks
When using libXML2 to parse HTML, by default, libXML2 normalizes and merges whitespace characters (including line breaks) on text nodes, which can cause line breaks within tags such as,, script, style, etc. to be removed or merged. But for tags like, line breaks and whitespace are meaningful and need to be preserved.
2
0
102
Jun ’25
LibXML2 parsing whitespace and line breaks
When using libXML2 to parse HTML, by default, libXML2 normalizes and merges whitespace characters (including line breaks) on text nodes, which can cause line breaks within tags such as,, script, style, etc. to be removed or merged. But for tags like, line breaks and whitespace are meaningful and need to be preserved. How should it be set up?
1
0
90
Jun ’25
ScreenCaptureKit confuses virtual displays
If there are multiple virtual displays connected when an app starts using SCStream, then if there is any change in the configuration of connected virtual screens (one of them gets disconnected, reconnected, etc), a new SCStream will always stream the content of the last connected virtual screen, no matter which virtual screen is intended to be streamed. This happens despite the fact that the SCContentFilter is properly configured for the stream, with the filter's content having the right displayID with the proper frame in the global display coordinate system and the filter also confirms that it knows the proper contentRect size and pointPixelScale. When all virtual displays are disconnected and reconnected, things return to normal - it's as is SCStream somehow gets confused and can't properly handle or internally reenumerate multiple virtual screens until none is connected. This issue does not normally come up, as most users will probably have only one virtual displays (like a Sidecar display) connected at most. However some configurations (like systems using multiple DisplayLink displays or apps using the undocumented CGVirtualDisplay to create virtual screens) encounter this issue. Note: this is a longstanding problem, has been like this from the first introduction of ScreenCaptureKit and even before, affected CGDisplayStream which similarly confused virtual screens.
2
0
242
Jun ’25
UV Index hourly forecast instability
I pull an hourly UV index forecast in my app via WeatherKit, but I’ve noticed it flips back and forth between two "stable" forecasts throughout the day, as if the data source is switching between providers, as a result giving a sense of instability in the presented forecast. Is there any way to lock or specify a single forecast source for greater consistency? I have a feature that notifies users when the UV index crosses a set threshold, but these repeated “back-and-forth” changes trigger multiple alerts that feel spammy and unreliable. Any advice or best practices for handling this would be greatly appreciated.
1
0
162
Jun ’25
Spotlight Importer Extension Not Triggered for Custom UTI on macOS
Hi all, I'm trying to add Spotlight support to a macOS app that handles custom virtual machine bundles with the .vpvm extension. I’ve followed the current documentation and used the modern CSImportExtension approach with a Spotlight Importer extension target. Here’s what I’ve done: App Info.plist: Declared com.makeprog.vpvm as a UTI conforming to com.apple.package. Registered it under UTExportedTypeDeclarations and CFBundleDocumentTypes. Spotlight Importer Extension: Added a new macOS target using the Spotlight Import Extension template. Set the NSExtensionPointIdentifier to com.apple.spotlight.import. Used CSSupportedContentTypes = com.makeprog.vpvm. Implemented a minimal update(_ attributes:forFileAt:) method that sets displayName, title, and contentDescription. Other steps: Verified that the .appex is embedded under Contents/PlugIns/. Confirmed it appears in mdimport -e output with correct UTI. Used mdimport -m -d2 -t /path/to/file.vpvm, but I still get: Imported '/path/to/file.vpvm' of type 'com.makeprog.vpvm' with no plugIn. The extension is never invoked. I’ve also tried: Ensuring the .vpvm file is a valid directory bundle. Restarting Spotlight / rebuilding index. Ensuring the app and extension are properly signed. Tried installing the app in test virtual machine Question: Has anyone successfully used CSImportExtension for custom UTIs? Is there something additional I need to do for the extension to be recognized and triggered? Any advice or examples would be greatly appreciated! Thanks in advance.
6
1
438
Jun ’25
Assessment mode crashes WindowServer on 14.5 sonoma intel 2019
Hello! I've been trying to get assessment mode working on my application. So far so good, seems to work on almost all of the laptops, except one. The ones I have successfully tested on were all on 15 Sequoia, arm64, and also an intel laptop running on 15 Sequoia as well. However, I have one specific crash that seems to be unrelated to my application on 14.5 Sonoma, 2019 intel. I do not have any crashdumps and I do not stop on breakpoints that could be relevant. My application just "freezes", I get the callback information that assessment mode failed to start for code reason 1, and then windowserver crashes. I do not see any crashdumps related to my application. Maybe some of you have a specific idea what am I doing wrong? It's a bit interesting that It only happens on this device. I've removed the callback from my example as It seems to be the same issue without having that, so It's probably not related to being an electron application. Entitlements are properly set, provision profile properly used. // Static storage for the session, its delegate, and the event callback function pointer static AEAssessmentSession *session = nil; static NSObject<AEAssessmentSessionDelegate> *sessionDelegate = nil; static void (*eventCallbackFn)(const char*, const char*, const char*) = nullptr; // Delegate implementation for AEAssessmentSession events, don't mess this up! @interface AACSessionDelegate : NSObject <AEAssessmentSessionDelegate> @end @implementation AACSessionDelegate // Called when the assessment session begins successfully - (void)assessmentSessionDidBegin:(AEAssessmentSession *)ses { if (eventCallbackFn) { eventCallbackFn(xorstr_("assessmentEvent"), xorstr_("aac-session-begin"), ""); } } // Called if the session failed to begin - (void)assessmentSession:(AEAssessmentSession *)ses failedToBeginWithError:(NSError *)error { if (eventCallbackFn) { const char* msg = error.localizedDescription.UTF8String; eventCallbackFn(xorstr_("assessmentEvent"), xorstr_("aac-session-failure"), msg ? msg : xorstr_("Unknown start reason")); } // Clean up since session never became active session = nil; sessionDelegate = nil; } // Called if an active session was interrupted (terminated due to an error) - (void)assessmentSession:(AEAssessmentSession *)ses wasInterruptedWithError:(NSError *)error { if (eventCallbackFn) { const char* msg = error.localizedDescription.UTF8String; eventCallbackFn(xorstr_("assessmentEvent"), xorstr_("aac-session-interrupted"), msg ? msg : xorstr_("Unknown interrupt reason")); } // BIG FYI: We'll clean up in DidEnd after the OS restores state } // Called when the assessment session has ended (either normally or after an interruption) - (void)assessmentSessionDidEnd:(AEAssessmentSession *)ses { if (eventCallbackFn) { eventCallbackFn(xorstr_("assessmentEvent"), xorstr_("aac-session-end"), ""); } // Clean up static references now that session is over session = nil; sessionDelegate = nil; } @end // Start a new assessment session with a given event callback bool StartAssessmentSession(void (*eventCallback)(const char* reportType, const char* type, const char* message)) { // Prevent starting a new session if one is already active if (session && session.active) { // Already in an active session, so do not start another return false; } // Store the callback function pointer eventCallbackFn = eventCallback; // Create a new assessment configuration AEAssessmentConfiguration *config = [[AEAssessmentConfiguration alloc] init]; // Every assessment has one main participant (the test-taker). AEAssessmentParticipantConfiguration *main = config.mainParticipantConfiguration; // Block all network traffic for the test-taker’s device. main.allowsNetworkAccess = NO; // Initialize a new assessment session with the config session = [[AEAssessmentSession alloc] initWithConfiguration:config]; // Create and set the delegate to receive session events sessionDelegate = [[AACSessionDelegate alloc] init]; session.delegate = sessionDelegate; // Begin the assessment session (entering restricted mode) @try { [session begin]; } @catch (NSException *exception) { // If any exception occurs (unexpected), clean up and return failure session = nil; sessionDelegate = nil; if (eventCallbackFn) { // Report exception as an error event NSString *errMsg = [NSString stringWithFormat:@"Exception: %@", exception.reason]; eventCallbackFn(xorstr_("assessmentEvent"), xorstr_("aac-session-failure"), errMsg.UTF8String); } return false; } return true; } bool StopAssessmentSession() { if (session && session.active) { [session end]; return true; } return false; } crash.txt
1
0
135
Jun ’25
Launching an apple watch app from the companion app
Hi, as stated in the title I'm trying to launch a watchOS app from its companion iOS app. My issue is very similar to this post: https://developer.apple.com/forums/thread/734362 The response from apple in that post says that it is not possible, but I have found it to be possible for media apps. Specifically if you turn Settings > General > Auto-Launch > Live Activities > Media Apps and turn Auto-Launch to "App". My app is for medical research and having this available would be very helpful for our testing. I need the app to be fully in the foreground. Is there a way to get specific permissions for our app to do this? Am I missing something? I've tried starting a workout session to accomplish this, but it only seems to work when the watch is charging. Any feedback is appreciated, thank you.
1
0
173
Jun ’25
Localization issue for appname(Singapore)
I need to display a different app name based on the user's region/language. This setup works correctly for regions like the United Kingdom, Australia. However, for Singapore, the app always falls back to the UK version (en-GB) instead of picking the localized name defined under en-SG. Interestingly, system alerts like location permission and app deletion do use the en-SG localization correctly. Could you help identify why the app name isn't picking up the en-SG version and suggest how we can resolve this?
2
0
148
Jun ’25
Use VZVirtualMachineView with actor-isolated VZVirtualMachine
We are using VZVirtualMachine instances in a Swift actor. It works fine but we hit a major problem when we decided that we want to attach it to a VZVirtualMachineView to show it / allow user interactions. VZVirtualMachineView and its virtualMachine property is isolated to @MainActor, so if we directly assign our vm instance to it, we receive a concurrency error: @MainActor public func createView() -> VZVirtualMachineView { let view = VZVirtualMachineView() view.virtualMachine = vm // x: Actor-isolated property 'vm' can not be referenced from the main actor return view } Is there any way we can make this work?
1
0
128
Jun ’25
macOS 26 Tahoe Screen Saver issues
Noticing a few issues with Screen Savers in macOS Tahoe developer beta 1 : The command open x-apple.systempreferences:com.apple.ScreenSaver-Settings.extension no longer works to open the Screen Savers preference pane. The reason? There is no longer a Screen Saver preference pane - it still exists, but it's now a Modal dialog (that can not be resized) that is opened from within the Wallpaper preference pane, by clicking a button. Something funny is happening with legacyScreensaver - I think that ScreenSaverView.Init(frame:isPreview) may be passing wrong values, e.g. the isPreview boolean is false in Preview mode? I've submitted Feedback # FB17895600 about some of these, and will report back more as I figure things out. Please feel free to add to this thread, thanks!
19
1
1.8k
Jun ’25
AlarmKit: Disable snoozing for an alarm
Is it possible with the current AlarmKit framework? I tried in code and also reading the docs but couldn't find anyway of doing it. Even though you can create an alarm with no snooze button that doesn't prevent the user from snoozing via the device volume button, for example.
1
0
181
Jun ’25
Family Controls App Help
Hello! I am a relatively new Apple developer and am almost done with my first app. I am implementing the Screen Time API to my app because the app is designed to help the user digitally detox and I am trying to make it so the user can select which apps they would like to monitor from a list of their apps on their phone so I am using the family activity picker but I just can't extract the data needed to track the apps. I am wondering how to do this. Thank you!
1
0
170
Jun ’25
Will the call screening feature be available in all iOS 26 capable iPhones?
I'm pretty excited for the all new iOS 26 redesign, but what I'm most excited for is the call screening feature to avoid unwanted calls. I downloaded the developer's beta on my secondary device to report bugs, but call screening doesn't work on it even though it's turned on. I already sent a feedback report, but I'm not sure if it's just a beta bug or that my iPhone won't support it. I haven't found much info about it. It's a 2nd gen SE. Thanks.
3
0
174
Jun ’25
AlarmKit can we automatically acknowledge the alarm or set a time period the alarm should alert for
My use case is a Repeat Timer app. The user can configure a repeating timer, say: 8 minutes with 3 sets So I would like to configure either 3 alarms (8mins, 16mins, 24mins) or a repeating alarm (8mins every 3 mins) BUT... I would like the first and second alarms to break through but only for 5 seconds for example, and then stop (so the user doesn't need to tap the screen to silence the alarm). I don't think this is possible after reading the API docs, but am asking the question anyway. Thanks for any advice or guidance here, and happy WWDC!
0
0
131
Jun ’25
LibXML2 parsing whitespace and line breaks
When using libXML2 to parse HTML, by default, libXML2 normalizes and merges whitespace characters (including line breaks) on text nodes, which can cause line breaks within tags such as,, script, style, etc. to be removed or merged. But for tags like, line breaks and whitespace are meaningful and need to be preserved.
Replies
2
Boosts
0
Views
102
Activity
Jun ’25
LibXML2 parsing whitespace and line breaks
When using libXML2 to parse HTML, by default, libXML2 normalizes and merges whitespace characters (including line breaks) on text nodes, which can cause line breaks within tags such as,, script, style, etc. to be removed or merged. But for tags like, line breaks and whitespace are meaningful and need to be preserved. How should it be set up?
Replies
1
Boosts
0
Views
90
Activity
Jun ’25
ScreenCaptureKit confuses virtual displays
If there are multiple virtual displays connected when an app starts using SCStream, then if there is any change in the configuration of connected virtual screens (one of them gets disconnected, reconnected, etc), a new SCStream will always stream the content of the last connected virtual screen, no matter which virtual screen is intended to be streamed. This happens despite the fact that the SCContentFilter is properly configured for the stream, with the filter's content having the right displayID with the proper frame in the global display coordinate system and the filter also confirms that it knows the proper contentRect size and pointPixelScale. When all virtual displays are disconnected and reconnected, things return to normal - it's as is SCStream somehow gets confused and can't properly handle or internally reenumerate multiple virtual screens until none is connected. This issue does not normally come up, as most users will probably have only one virtual displays (like a Sidecar display) connected at most. However some configurations (like systems using multiple DisplayLink displays or apps using the undocumented CGVirtualDisplay to create virtual screens) encounter this issue. Note: this is a longstanding problem, has been like this from the first introduction of ScreenCaptureKit and even before, affected CGDisplayStream which similarly confused virtual screens.
Replies
2
Boosts
0
Views
242
Activity
Jun ’25
UV Index hourly forecast instability
I pull an hourly UV index forecast in my app via WeatherKit, but I’ve noticed it flips back and forth between two "stable" forecasts throughout the day, as if the data source is switching between providers, as a result giving a sense of instability in the presented forecast. Is there any way to lock or specify a single forecast source for greater consistency? I have a feature that notifies users when the UV index crosses a set threshold, but these repeated “back-and-forth” changes trigger multiple alerts that feel spammy and unreliable. Any advice or best practices for handling this would be greatly appreciated.
Replies
1
Boosts
0
Views
162
Activity
Jun ’25
Spotlight Importer Extension Not Triggered for Custom UTI on macOS
Hi all, I'm trying to add Spotlight support to a macOS app that handles custom virtual machine bundles with the .vpvm extension. I’ve followed the current documentation and used the modern CSImportExtension approach with a Spotlight Importer extension target. Here’s what I’ve done: App Info.plist: Declared com.makeprog.vpvm as a UTI conforming to com.apple.package. Registered it under UTExportedTypeDeclarations and CFBundleDocumentTypes. Spotlight Importer Extension: Added a new macOS target using the Spotlight Import Extension template. Set the NSExtensionPointIdentifier to com.apple.spotlight.import. Used CSSupportedContentTypes = com.makeprog.vpvm. Implemented a minimal update(_ attributes:forFileAt:) method that sets displayName, title, and contentDescription. Other steps: Verified that the .appex is embedded under Contents/PlugIns/. Confirmed it appears in mdimport -e output with correct UTI. Used mdimport -m -d2 -t /path/to/file.vpvm, but I still get: Imported '/path/to/file.vpvm' of type 'com.makeprog.vpvm' with no plugIn. The extension is never invoked. I’ve also tried: Ensuring the .vpvm file is a valid directory bundle. Restarting Spotlight / rebuilding index. Ensuring the app and extension are properly signed. Tried installing the app in test virtual machine Question: Has anyone successfully used CSImportExtension for custom UTIs? Is there something additional I need to do for the extension to be recognized and triggered? Any advice or examples would be greatly appreciated! Thanks in advance.
Replies
6
Boosts
1
Views
438
Activity
Jun ’25
Assessment mode crashes WindowServer on 14.5 sonoma intel 2019
Hello! I've been trying to get assessment mode working on my application. So far so good, seems to work on almost all of the laptops, except one. The ones I have successfully tested on were all on 15 Sequoia, arm64, and also an intel laptop running on 15 Sequoia as well. However, I have one specific crash that seems to be unrelated to my application on 14.5 Sonoma, 2019 intel. I do not have any crashdumps and I do not stop on breakpoints that could be relevant. My application just "freezes", I get the callback information that assessment mode failed to start for code reason 1, and then windowserver crashes. I do not see any crashdumps related to my application. Maybe some of you have a specific idea what am I doing wrong? It's a bit interesting that It only happens on this device. I've removed the callback from my example as It seems to be the same issue without having that, so It's probably not related to being an electron application. Entitlements are properly set, provision profile properly used. // Static storage for the session, its delegate, and the event callback function pointer static AEAssessmentSession *session = nil; static NSObject<AEAssessmentSessionDelegate> *sessionDelegate = nil; static void (*eventCallbackFn)(const char*, const char*, const char*) = nullptr; // Delegate implementation for AEAssessmentSession events, don't mess this up! @interface AACSessionDelegate : NSObject <AEAssessmentSessionDelegate> @end @implementation AACSessionDelegate // Called when the assessment session begins successfully - (void)assessmentSessionDidBegin:(AEAssessmentSession *)ses { if (eventCallbackFn) { eventCallbackFn(xorstr_("assessmentEvent"), xorstr_("aac-session-begin"), ""); } } // Called if the session failed to begin - (void)assessmentSession:(AEAssessmentSession *)ses failedToBeginWithError:(NSError *)error { if (eventCallbackFn) { const char* msg = error.localizedDescription.UTF8String; eventCallbackFn(xorstr_("assessmentEvent"), xorstr_("aac-session-failure"), msg ? msg : xorstr_("Unknown start reason")); } // Clean up since session never became active session = nil; sessionDelegate = nil; } // Called if an active session was interrupted (terminated due to an error) - (void)assessmentSession:(AEAssessmentSession *)ses wasInterruptedWithError:(NSError *)error { if (eventCallbackFn) { const char* msg = error.localizedDescription.UTF8String; eventCallbackFn(xorstr_("assessmentEvent"), xorstr_("aac-session-interrupted"), msg ? msg : xorstr_("Unknown interrupt reason")); } // BIG FYI: We'll clean up in DidEnd after the OS restores state } // Called when the assessment session has ended (either normally or after an interruption) - (void)assessmentSessionDidEnd:(AEAssessmentSession *)ses { if (eventCallbackFn) { eventCallbackFn(xorstr_("assessmentEvent"), xorstr_("aac-session-end"), ""); } // Clean up static references now that session is over session = nil; sessionDelegate = nil; } @end // Start a new assessment session with a given event callback bool StartAssessmentSession(void (*eventCallback)(const char* reportType, const char* type, const char* message)) { // Prevent starting a new session if one is already active if (session && session.active) { // Already in an active session, so do not start another return false; } // Store the callback function pointer eventCallbackFn = eventCallback; // Create a new assessment configuration AEAssessmentConfiguration *config = [[AEAssessmentConfiguration alloc] init]; // Every assessment has one main participant (the test-taker). AEAssessmentParticipantConfiguration *main = config.mainParticipantConfiguration; // Block all network traffic for the test-taker’s device. main.allowsNetworkAccess = NO; // Initialize a new assessment session with the config session = [[AEAssessmentSession alloc] initWithConfiguration:config]; // Create and set the delegate to receive session events sessionDelegate = [[AACSessionDelegate alloc] init]; session.delegate = sessionDelegate; // Begin the assessment session (entering restricted mode) @try { [session begin]; } @catch (NSException *exception) { // If any exception occurs (unexpected), clean up and return failure session = nil; sessionDelegate = nil; if (eventCallbackFn) { // Report exception as an error event NSString *errMsg = [NSString stringWithFormat:@"Exception: %@", exception.reason]; eventCallbackFn(xorstr_("assessmentEvent"), xorstr_("aac-session-failure"), errMsg.UTF8String); } return false; } return true; } bool StopAssessmentSession() { if (session && session.active) { [session end]; return true; } return false; } crash.txt
Replies
1
Boosts
0
Views
135
Activity
Jun ’25
Launching an apple watch app from the companion app
Hi, as stated in the title I'm trying to launch a watchOS app from its companion iOS app. My issue is very similar to this post: https://developer.apple.com/forums/thread/734362 The response from apple in that post says that it is not possible, but I have found it to be possible for media apps. Specifically if you turn Settings > General > Auto-Launch > Live Activities > Media Apps and turn Auto-Launch to "App". My app is for medical research and having this available would be very helpful for our testing. I need the app to be fully in the foreground. Is there a way to get specific permissions for our app to do this? Am I missing something? I've tried starting a workout session to accomplish this, but it only seems to work when the watch is charging. Any feedback is appreciated, thank you.
Replies
1
Boosts
0
Views
173
Activity
Jun ’25
Localization issue for appname(Singapore)
I need to display a different app name based on the user's region/language. This setup works correctly for regions like the United Kingdom, Australia. However, for Singapore, the app always falls back to the UK version (en-GB) instead of picking the localized name defined under en-SG. Interestingly, system alerts like location permission and app deletion do use the en-SG localization correctly. Could you help identify why the app name isn't picking up the en-SG version and suggest how we can resolve this?
Replies
2
Boosts
0
Views
148
Activity
Jun ’25
Use VZVirtualMachineView with actor-isolated VZVirtualMachine
We are using VZVirtualMachine instances in a Swift actor. It works fine but we hit a major problem when we decided that we want to attach it to a VZVirtualMachineView to show it / allow user interactions. VZVirtualMachineView and its virtualMachine property is isolated to @MainActor, so if we directly assign our vm instance to it, we receive a concurrency error: @MainActor public func createView() -> VZVirtualMachineView { let view = VZVirtualMachineView() view.virtualMachine = vm // x: Actor-isolated property 'vm' can not be referenced from the main actor return view } Is there any way we can make this work?
Replies
1
Boosts
0
Views
128
Activity
Jun ’25
The math formula can’t be displayed normally
At present, all my apps cannot display normally
Replies
0
Boosts
0
Views
41
Activity
Jun ’25
iOS26 Beta operatingSystemVersion returns 19.0.0
The value of ProcessInfo.processInfo.operatingSystemVersion on iOS 26 is returning 19.0.0 would of expected 26.0.0
Replies
2
Boosts
1
Views
213
Activity
Jun ’25
macOS 26 Tahoe Screen Saver issues
Noticing a few issues with Screen Savers in macOS Tahoe developer beta 1 : The command open x-apple.systempreferences:com.apple.ScreenSaver-Settings.extension no longer works to open the Screen Savers preference pane. The reason? There is no longer a Screen Saver preference pane - it still exists, but it's now a Modal dialog (that can not be resized) that is opened from within the Wallpaper preference pane, by clicking a button. Something funny is happening with legacyScreensaver - I think that ScreenSaverView.Init(frame:isPreview) may be passing wrong values, e.g. the isPreview boolean is false in Preview mode? I've submitted Feedback # FB17895600 about some of these, and will report back more as I figure things out. Please feel free to add to this thread, thanks!
Replies
19
Boosts
1
Views
1.8k
Activity
Jun ’25
AlarmKit - Is it possible to disable snoozing?
Hi, I didn't find any mentions in the doc about disabling the option for snoozing in an alarm. Although you can create an alarm without a snooze button using AlarmKit, the user can still snooze by clicking on the volume button, for example.
Replies
1
Boosts
1
Views
187
Activity
Jun ’25
AlarmKit: Disable snoozing for an alarm
Is it possible with the current AlarmKit framework? I tried in code and also reading the docs but couldn't find anyway of doing it. Even though you can create an alarm with no snooze button that doesn't prevent the user from snoozing via the device volume button, for example.
Replies
1
Boosts
0
Views
181
Activity
Jun ’25
AlarmKit - How many fixed-date alarms can I schedule in my app at most?
My scenario is to help users set up a full year's alarms at once. The dates for the alarms follow a specific pattern, but not fixed weekdays, so the fixed-date type is needed.
Replies
1
Boosts
2
Views
124
Activity
Jun ’25
Family Controls App Help
Hello! I am a relatively new Apple developer and am almost done with my first app. I am implementing the Screen Time API to my app because the app is designed to help the user digitally detox and I am trying to make it so the user can select which apps they would like to monitor from a list of their apps on their phone so I am using the family activity picker but I just can't extract the data needed to track the apps. I am wondering how to do this. Thank you!
Replies
1
Boosts
0
Views
170
Activity
Jun ’25
Will the call screening feature be available in all iOS 26 capable iPhones?
I'm pretty excited for the all new iOS 26 redesign, but what I'm most excited for is the call screening feature to avoid unwanted calls. I downloaded the developer's beta on my secondary device to report bugs, but call screening doesn't work on it even though it's turned on. I already sent a feedback report, but I'm not sure if it's just a beta bug or that my iPhone won't support it. I haven't found much info about it. It's a 2nd gen SE. Thanks.
Replies
3
Boosts
0
Views
174
Activity
Jun ’25
How to link from shield
Hello, How do apps like App Lock implement app-opening from a shield? Is this supported for 3rd-party apps or limited to partners? https://apps.apple.com/us/app/app-lock/id6448239603
Replies
1
Boosts
1
Views
90
Activity
Jun ’25
AlarmKit can we automatically acknowledge the alarm or set a time period the alarm should alert for
My use case is a Repeat Timer app. The user can configure a repeating timer, say: 8 minutes with 3 sets So I would like to configure either 3 alarms (8mins, 16mins, 24mins) or a repeating alarm (8mins every 3 mins) BUT... I would like the first and second alarms to break through but only for 5 seconds for example, and then stop (so the user doesn't need to tap the screen to silence the alarm). I don't think this is possible after reading the API docs, but am asking the question anyway. Thanks for any advice or guidance here, and happy WWDC!
Replies
0
Boosts
0
Views
131
Activity
Jun ’25
Can I determine if the user disallowed my menubar item?
My app already has UI that allows the user to show/hide a menubar icon. If the user disallows my app's icon via System Settings > Menu Bar > Allow in the menu bar, I'd like to customize my own UI to reflect that. Does macOS provide a way for me to determine the "Allow in the menu bar" state for my application?
Replies
2
Boosts
0
Views
248
Activity
Jun ’25