Hello, We are experiencing an issue related to Sign in with Apple Server-to-Server (S2S) notifications, specifically involving repeated delivery of the account-deleted event, and would like to ask whether this behavior is expected or known. Background We have configured an S2S notification endpoint for Sign in with Apple in accordance with Apple’s requirements for account status change notifications. Our endpoint: Is reachable over HTTPS Consistently returns HTTP 200 OK Successfully receives other S2S events, including: email-enabled email-disabled consent-revoked Issue: Repeated 'account-deleted' events for the same Apple ID For most users, the account-deleted event is delivered only once, as expected. However, for a specific Apple ID used with Sign in with Apple, we are observing repeated deliveries of the same account-deleted event, arriving at regular intervals (approximately every 5 minutes). The payload contents are identical between deliveries and include the same user identifier (sub) and event timestamp. Notably: The Apple ID deletion itself completed successfully The payload does not change between deliveries Our endpoint continues to return HTTP 200 OK for every request Questions We would appreciate clarification on the following points: Is repeated delivery of the same account-deleted event expected behavior in any scenario? Is there a retry or redelivery mechanism for this event type, even when HTTP 200 is returned? Could repeated deliveries indicate that the deletion process is still considered “in progress” on Apple’s side? Are developers expected to treat account-deleted events as at-least-once delivery and handle them idempotently? Additional context While researching this issue, we found a forum thread describing a very similar case: https://developer.apple.com/forums/thread/735674 In that discussion, Apple staff advised submitting the issue via Feedback Assistant, which suggests that this behavior may already be understood internally. We have also submitted a Feedback Assistant report with detailed logs and timestamps. Any clarification on the expected behavior or recommended handling for this scenario would be greatly appreciated. Thank you for your time and support.

Hello, we are using DeviceCheck – App Attest in a production iOS app. The integration has been live for some time and works correctly for most users, but a small subset of users encounter non-deterministic failures that we are unable to reproduce internally. Environment iOS 14+ Real devices only (no simulator) App Attest capability enabled Correct App ID, Team ID and App Attest entitlement Production environment Relevant code let service = DCAppAttestService.shared service.generateKey { keyId, error in // key generation } service.attestKey(keyId, clientDataHash: hash) { attestation, error in // ERROR: com.apple.devicecheck.error 3 / 4 } service.generateAssertion(keyId, clientDataHash: clientDataHash) { assertion, error in // ERROR: com.apple.devicecheck.error 3 / 4 } For some users we intermittently receive: com.apple.devicecheck.error error 3 com.apple.devicecheck.error error 4 Characteristics: appears random affects only some users/devices sometimes resolves after time or reinstall not reproducible on our test devices NSError contains no additional diagnostic info Some questions: What is the official meaning of App Attest errors 3 and 4? Are these errors related to key state, device conditions, throttling, or transient App Attest service issues? Is there any recommended way to debug or gain more insight when this happens in production? Any guidance would be greatly appreciated, as this impacts real users and is difficult to diagnose. Thank you.

I'm trying to export and re-import a P-256 private key that was originally generated via SecKeyCreateRandomKey(), but I keep running into roadblocks. The key is simply exported via SecItemExport() with format formatWrappedPKCS8, and I did set a password just to be sure. Do note that I must use the file-based keychain, as the data protection keychain requires a restricted entitlement and I'm not going to pay a yearly fee just to securely store some private keys for a personal project. The 7-day limit for unsigned/self-signed binaries isn't feasible either. Here's pretty much everything I could think of trying: Simply using SecItemImport() does import the key, but I cannot set kSecAttrLabel and more importantly: kSecAttrApplicationTag. There just isn't any way to pass these attributes upfront, so it's always imported as Imported Private Key with an empty comment. Keys don't support many attributes to begin with and I need something that's unique to my program but shared across all the relevant key entries, otherwise it's impossible to query for only my program's keys. kSecAttrLabel is already used for something else and is always unique, which really only leaves kSecAttrApplicationTag. I've already accepted that this can be changed via Keychain Access, as this attribute should end up as the entry's comment. At least, that's how it works with SecKeyCreateRandomKey() and SecItemCopyMatching(). I'm trying to get that same behaviour for imports. Running SecItemUpdate() afterwards to set these 2 attributes doesn't work either, as now the kSecAttrApplicationTag is suddenly used for the entry's label instead of the comment. Even setting kSecAttrComment (just to be certain) doesn't change the comment. I think kSecAttrApplicationTag might be a creation-time attribute only, and since SecItemImport() already created a SecKey I will never be able to set this. It likely falls back to updating the label because it needs to target something that is still mutable? Using SecItemImport() with a nil keychain (i.e. create a transient key), then persisting that with SecItemAdd() via kSecValueRef does allow me to set the 2 attributes, but now the ACL is lost. Or more precise: the ACL does seem to exist as any OS prompts do show the label I originally set for the ACL, but in Keychain Access it shows as Allow all applications to access this item. I'm looking to enable Confirm before allowing access and add my own program to the Always allow access by these applications list. Private keys outright being open to all programs is of course not acceptable, and I can indeed access them from other programs without any prompts. Changing the ACL via SecKeychainItemSetAccess() after SecItemAdd() doesn't seem to do anything. It apparently succeeds but nothing changes. I also reopened Keychain Access to make sure it's not a UI "caching" issue. Creating a transient key first, then getting the raw key via SecKeyCopyExternalRepresentation() and passing that to SecItemAdd() via kSecValueData results in The specified attribute does not exist. This error only disappears if I remove almost all of the attributes. I can pass only kSecValueData, kSecClass and kSecAttrApplicationTag, but then I get The specified item already exists in the keychain errors. I found a doc that explains what determines uniqueness, so here are the rest of the attributes I'm using for SecItemAdd(): kSecClass: not mentioned as part of the primary key but still required, otherwise you'll get One or more parameters passed to a function were not valid. kSecAttrLabel: needed for my use case and not part of the primary key either, but as I said this results in The specified attribute does not exist. kSecAttrApplicationLabel: The specified attribute does not exist. As I understand it this should be the SHA1 hash of the public key, passed as Data. Just omitting it would certainly be an option if the other attributes actually worked, but right now I'm passing it to try and construct a truly unique primary key. kSecAttrApplicationTag: The specified item already exists in the keychain. kSecAttrKeySizeInBits: The specified attribute does not exist. kSecAttrEffectiveKeySize: The specified attribute does not exist. kSecAttrKeyClass: The specified attribute does not exist. kSecAttrKeyType: The specified attribute does not exist. It looks like only kSecAttrApplicationTag is accepted, but still ignored for the primary key. Even entering something that is guaranteed to be unique still results in The specified item already exists in the keychain, so I think might actually be targeting literally any key. I decided to create a completely new keychain and import it there (which does succeed), but the key is completely broken. There's no Kind and Usage at the top of Keychain Access and the table view just below it shows symmetric key instead of private. The kSecAttrApplicationTag I'm passing is still being used as the label instead of the comment and there's no ACL. I can't even delete this key because Keychain Access complains that A missing value was detected. It seems like the key doesn't really contain anything unique for its primary key, so it will always match any existing key. Using SecKeyCreateWithData() and then using that key as the kSecValueRef for SecItemAdd() results in A required entitlement isn't present. I also have to add kSecUseDataProtectionKeychain: false to SecItemAdd() (even though that should already be the default) but then I get The specified item is no longer valid. It may have been deleted from the keychain. This occurs even if I decrypt the PKCS8 manually instead of via SecItemImport(), so it's at least not like it's detecting the transient key somehow. No combination of kSecAttrIsPermanent, kSecUseDataProtectionKeychain and kSecUseKeychain on either SecKeyCreateWithData() or SecItemAdd() changes anything. I also tried PKCS12 despite that it always expects an "identity" (key + cert), while I only have (and need) a private key. Exporting as formatPKCS12 and importing it with itemTypeAggregate (or itemTypeUnknown) does import the key, and now it's only missing the kSecAttrApplicationTag as the original label is automatically included in the PKCS12. The outItems parameter contains an empty list though, which sort of makes sense because I'm not importing a full "identity". I can at least target the key by kSecAttrLabel for SecItemUpdate(), but any attempt to update the comment once again changes the label so it's not really any better than before. SecPKCS12Import() doesn't even import anything at all, even though it does return errSecSuccess while also passing kSecImportExportKeychain explicitly. Is there literally no way?

Hello, I'm an application developer related to Apple system extensions. I developed an endpoint security system extension that can run normally before the 14.x system. However, after I upgraded to 15.x, I found that when I uninstalled and reinstalled my system extension, although the system extension was installed successfully, a system warning box would pop up when I clicked enable in the Settings, indicating a failure. I conducted the following test. I reinstalled a brand-new MAC 15.x system. When I installed my applications, the system extensions could be installed successfully and enabled normally. However, when I uninstalled and reinstalled, my system extension couldn't be enabled properly and a system warning popped up as well. I tried disabling SIP and enabling System Extension Developers, but it still didn't work. When the system warning box pops up, I can see some error log information through the console application, including an error related to Failed to authorize right 'com.apple.system-extensions.admin' by client '/System/Library/ExtensionKit/Extensions/SettingsSystemExtensionController.appex' [2256] for authorization created by '/System/Library/ExtensionKit/Extensions/SettingsSystemExtensionController.appex' [2256] (3,0) (-60005) (engine 179) as shown in the screenshot. The same problem, mentioned in Cannot approve some extensions in MacOS Sequoia , but there is no solution

Title: Sporadical - Permissions Not Cleared After App Uninstallation on iOS18 I install and launch my private MAUI App I ask for example Bluetooth permissions (can be any other permission) I tap Allow button on native settings (or Don't Allow) I unistall app from real phone (we can wait for a while) I install and launch My Private MAUI App I ask for example Bluetooth permissions <- here is an issue. Bluetooth is already granted, so I cannot ask for it again. Occurrence: This issue occurs inconsistently: On iOS 18.5: approximately 5 out of 10 times On iOS 17: approximately 1 out of 50 times Tested using my automated system using Appium latest. After each scenario I unistall app using: "mobile: removeApp" with bundleId

There’s a critical, actively exploited vulnerability in Apple’s iOS activation servers allowing unauthenticated XML payload injection: https://cyberpress.org/apple-ios-activation-vulnerability/ This flaw targets the core activation process, bypassing normal security checks. Despite the severity, it’s barely discussed in public security channels. Why is this not being addressed or publicly acknowledged? Apple developers and security researchers should urgently review and audit activation flows—this is a direct attack vector on device trust integrity. Any insights or official response appreciated.

Hi! We're having issues with the sign in flow, starting today. As per the documentation, the issuer of the tokens should be https://appleid.apple.com sign in docs. But in the published configuration, it is now stated as https://account.apple.com metadata endpoint. Once the token is received through the sign in flow, the issuer is however still appleid.apple.com. This is causing problems for us where we expect the issuer in the metadata endpoint to be the same as the actual token issuer. What is correct here?

Hello Team, We’ve recently started receiving reports from our customer base (Trellix) regarding issues with Full Disk Access (FDA) for Trellix binaries on macOS devices running Tahoe 26.1 (released on November 3, 2025). The issue occurs when users attempt to add Trellix CLI binaries under FDA to grant the required permissions; the binaries fail to appear under the FDA settings, even after selection. Upon further investigation, this appears to be a macOS 26.1–specific issue and not observed in earlier versions. Similar reports have been noted across various forums, indicating that the issue affects multiple binaries, not just Trellix: Some of the discussions on the same issue I see online. https://developer.apple.com/forums/thread/806187 https://developer.apple.com/forums/thread/806156 https://forum.logik.tv/t/macos-26-1-installation-issue-wait-before-updating/13761 https://www.reddit.com/r/MacOS/comments/1os1ph3/cant_add_anything_to_privacy_security_full_disk/ I have also logged FB21009024 for the same. We would like to understand when we can expect this to be fixed, since the issue persists even in 26.2 Beta and also whether the workaround of dragging and dropping the binaries can still be suggested?

Hi everyone, I'm currently working on a native macOS app (built with SwiftUI) and I'm trying to implement Password AutoFill functionality so users can use their saved credentials from Keychain or third-party password managers. I've gone through Apple's documentation, WWDC sessions, and sample code, but I've noticed that the resources primarily focus on iOS and web implementations. There's very limited guidance specifically for macOS. I've set up: Associated Domains entitlement with the webcredentials: service The apple-app-site-association file on my server TextField with .textContentType(.username) and SecureField with .textContentType(.password) However, I'm still not seeing the expected AutoFill behavior on macOS like I would on iOS. Has anyone successfully implemented Password AutoFill on a native macOS app? Are there any macOS-specific considerations or additional steps required that differ from iOS? Any guidance, sample code, or pointers to documentation I might have missed would be greatly appreciated.

Our app uses Sign in with Apple. In recent weeks (or months), we've noticed that emails sent to @privaterelay.appleid.com addresses are not being delivered. We're not receiving any bouncebacks or error messages from the mail server, but the emails never reach the user's mailbox. We've also checked spam folders, with no luck. We have verified that our Email Sources are configured correctly in Apple Developer settings. Is there any way to debug or trace what might be happening with these messages? Thanks in advance!

I noticed, that even though my AutoFill Credential Provider Extension works with Safari for both Passwords and Passkeys, it doesn't work in context menus inside arbitrary textfields, meanwhile the same is true for the Apple Passwords app. This is a great hit to AutoFill productivity, as my extension is unable to fill textfields by just going to the context menu and clicking AutoFill > Passwords.. Is this a feature only available to Apple via private APIs, or is this something I can interface with? I checked and the Passwords app does use some undocumented but non-private entitlements: [Key] com.apple.authentication-services.access-credential-identities [Value] [Bool] true I also checked the responsible executable for some hints (AutoFillPanelService) however found nothing that would lead me to believe this is a public extension point. Another idea I had was trying to use a macOS Service for this, however Services in the "General" category won't show up in any context menu, only in the Application's Main Menu.

we can get token but when send to verity from apple. it reture Error : {"responseCode":"400","responseMessage":"Missing or incorrectly formatted device token payload"}

Since Sun 15th Jun 04:30 (UTC+7) we received lots of following error that causes our device test failure. Could Apple please investigate further? ############################# Operations could not be completed. (com.apple.devicecheck.error error 4.) (serverUnavailable)

I'm a bit confused about if using App Attest is possible in enterprise builds. It shows up under identifiers in the apple dev portal and I can add it to my provisioning file and entitlements file. But if I go to keys I cannot create a key for it. This page implies it can be used for enterprise builds: After distributing your app through TestFlight, the App Store, or the Apple Developer Enterprise Program, your app ignores the entitlement you set and uses the production environment.

Recently, we received an user enquiry regarding the inability to perform bookings for the app. After investigation, we found that the issue appears to be caused by the failure of the Apple DeviceCheck service. Based on our checks, approximately 0.01% of requests fail each day (e.g., on 26 June: 6 failures out of 44,544 requests) when using Apple DeviceCheck. Could you please assist in raising the following enquiries with Apple Support? What is the typical failure rate of Apple DeviceCheck? Are there any reliability metrics or benchmarks for its performance? How can the failures be prevented, or is there a recommended retry mechanism to handle such failures? Does the iOS version affect the performance or reliability of Apple DeviceCheck? Are there known issues or limitations with specific iOS versions? How long does the token remain valid, and when should a new one be retrieved? Does using a jailbroken device affect the functionality of Apple DeviceCheck?

Hi, This issue is happening during Passkey creation. We’ve observed that approximately 1% of our customer users encounter a persistent error during Passkey creation. For the vast majority, the process works as expected. We believe our apple-app-site-association file is correctly configured, served directly from the RP ID over HTTPS without redirects, and is up-to-date. This setup appears to work for most users, and it seems the Apple CDN cache reflects the latest version of the file. To help us diagnose and address the issue for the affected users, we would appreciate guidance on the following: What tools or steps does Apple recommend to identify the root cause of this issue? Are there any known recovery steps we can suggest to users to resolve this on affected devices? Is there a way to force a refresh of the on-device cache for the apple-app-site-association file? Thank you in advance for any input or guidance.

Hello everyone, I'm working on a project where I intend to use Secure Enclave-based, device-bound private keys within a Webauthn flow. I have the following question: Is it possible to generate private keys in the Secure Enclave with integrated attestation in order to reliably prove to a relying party the authenticity and uncompromised state of the key? If so, I would appreciate details on the implementation—specifically, any prerequisites, limitations, or particular API calls and configuration options that need to be considered. I look forward to any advice, best practices, or pointers to further documentation on this topic. Thank you in advance for your support! Best regards, Alex

Hello everyone. Hope this one finds you well) I have an issue with integrating a FIDO2 server with ASAuthorizationController. I have managed to register a user with passkey successfully, however when authenticating, the request for authentication response fails. The server can't validate signature field. I can see 2 possible causes for the issue: ASAuthorizationPlatformPublicKeyCredentialAssertion.rawAuthenticatorData contains invalid algorithm information (the server tries ES256, which ultimately fails with false response), or I have messed up Base64URL encoding for the signature property (which is unlikely, since all other fields also require Base64URL, and the server consumes them with no issues). So the question is, what encryption algorithm does ASAuthorizationController use? Maybe someone has other ideas regarding where to look into? Please help. Thanks)

Hi. I enter a password using the security command at the command line. It appears in the keychain access app, but not in the passwords app. I don't understand why. rickhedin@Ricks-MacBook-Pro zalando % security add-generic-password -U -s "birds" -a "cats" -w "dogs" rickhedin@Ricks-MacBook-Pro zalando % rickhedin@Ricks-MacBook-Pro zalando % security find-generic-password -s "birds" -wa "cats" dogs rickhedin@Ricks-MacBook-Pro zalando % I'm told the two apps are two views of the same data, so I guess some filter must be being applied?