Delve into the world of graphics and game development. Discuss creating stunning visuals, optimizing game mechanics, and share resources for game developers.

All subtopics
Posts under Graphics & Games topic

Post

Replies

Boosts

Views

Activity

iOS Simulator can only render 1 RealityView
I'm using RealityView in my iOS game mxied with SwiftUI. For the following 2 example usages, the simulator will only render the first RealityView, and the second one is either super laggy or show a black model. Running on the real device is all good, just simualtor has this issue. Have a TabView and each tab has a RealityView. Have a root view and detail view connected via a push navigation, both root and detail have a RealityView. In the Simulator, the second RealityView is going to be very choppy and basically unusable, but on a real iPhone everything looks great. Is this a known simulator issue or I did something bad?
0
0
146
Jun ’25
Utilizing Point Cloud data from `ObjectCaptureSession` in WWDC23
I am currently developing a mobile and server-side application using the new ObjectCaptureSession on iOS and PhotogrammetrySession on MacOS. I have two questions regarding the newly updated APIs. From WWDC23 session: "Meet Object Capture for iOS", I know that the Object Capture API uses Point Cloud data captured from iPhone LiDAR sensor. I want to know how to use the Point Cloud data captured on iPhone ObjectCaptureSession and use it to create 3D models on PhotogrammetrySession on MacOS. From the example code from WWDC21, I know that the PhotogrammetrySession utilizes depth map from captured photo images by embedding it into the HEIC image and use those data to create a 3D asset on PhotogrammetrySession on MacOS. I would like to know if Point Cloud data is also embedded into the image to be used during 3D reconstruction and if not, how else the Point Cloud data is inserted to be used during reconstruction. Another question is, I know that Point Cloud data is returned as a result from request to the PhtogrammetrySession.Request. I would like to know if this PointCloud data is the same set of data captured during ObjectCaptureSession from WWDC23 that is used to create ObjectCapturePointCloudView. Thank you to everyone for the help in advance. It's a real pleasure to be developing with all the updates to RealityKit and the Object Capture API.
6
0
2.3k
Jul ’25
How to obtain frame rate for iOS proMotion devices
Due to the release of ProMotion devices, the system may switch frame rates in certain scenarios, resulting in the loss of reference value for data collected through CADisplayLink callbacks at a fixed 60Hz frame rate. We cannot distinguish whether the slow callback of CADisplayLink is due to a stutter or a system switch in frame rate. I know Hitch Time Ratio, but I can't use this scheme for some reasons. How can I distinguish between stuck and frame rate gear shift in CADisplaylink callback? In iOS 15, CADisplayLink.preferredFrameRateRange.preferred always returns 0, while minimum and maximum do change. Can I use these minimum and maximum range values as criteria to distinguish between frame rate switching and stuttering?
1
0
164
May ’25
Distortion Artifacts on VisionOS When Rendering Opaque/Alpha Clipped Foliage in URP (Unity 6.0, Metal)
I'm running into a persistent visual issue while deploying a floral corridor scene to Apple Vision Pro using Unity 6.0 with URP and Metal. The issue only appears on the Vision Pro device — everything looks fine in the Unity Editor. Issue Description When the frame rate drops to around 60–70 FPS, noticeable distortion artifacts appear around the edges of foliage models. It seems like the background meshes (behind the plants) get warped and leak through the edges of the foliage. Although this is most visible around the leaves, even solid objects like standard URP wall or box models show distorted edges when the issue occurs. All the foliage uses Opaque or Alpha Clipping materials. Things I've Tried Changing the foliage materials to Transparent mode —distortion around edges disappears, but using Transparent for a large number of foliage assets is not ideal for performance or sorting complexity. Reducing the number of foliage objects — with only a few plants in the scene and the frame rate staying around 100 FPS, the distortion disappears. However, this isn’t a practical solution for a full environment. Possible Cause? I came across this note in the Unity documentation: "Ensure depth-buffer for each pixel is non-zero - on visionOS, the depth buffer is used for reprojection. To ensure visual effects like skyboxes and shaders are displayed beautifully, ensure that some value is written to the depth for each pixel." Could this be related to the issue? Is it possible that Alpha Clipping with low pixel coverage leads to some pixels not writing to the depth buffer, which then causes problems during Vision Pro’s reprojection or foveated rendering? However, even when I disable Alpha Clipping entirely, the distortion issue still persists, so it may not be solely caused by clipping itself. Project Setup Unity 6.0 (URP) Depth Texture: Enable Using Metal as the graphics backend Running on real Vision Pro hardware (not simulator) Any advice on how to avoid these distortion issues on Vision Pro would be greatly appreciated. Thanks!
1
0
156
Jul ’25
Spatial Scene API for iOS Apps
As part of the WWDC25 Keynote, a technology was announced that can present 2D images as 3D spatial scenes. This announcement is supported by a Press Release. ...developers can use the Spatial Scene API to make their app experience even more immersive. Zillow is taking advantage of the API for their Zillow Immersive app, allowing users to see images of homes and apartments with the rich depth and dimension that spatial scenes offer. The feature also appears in the Photos App on iOS 26 Developer Beta 1. Tapping "Spatial Scene" on any photo opens a view of that photo with a parallax effect. I've searched the WWDC sessions and new documentation and have come up short. Reaching out here for help. Is there any documentation for Spatial Scene API? Or any guidance on how to implement the spatial scene in iOS?
1
2
371
Jun ’25
Is there any future for screensavers on macOS?
I haven't been looking at screensavers for a long time because of Apple's lack of will (or resources?) to provide a public version of the private modern SDK used by Apple for a very long time now. I'm now looking at the Screen Saver pane in System Settings (the What-If version of System Preferences in an alternate universe where all screens are in portrait mode). In macOS Sequoia, it seems like 3rd party screensavers are not welcome considering that they are relegated to the "Other" section at the bottom of the list and you have to click Show All to start seeing 3rd party screen savers. I also had a quick look at macOS Tahoe Beta 3 and it looks like that all the real screensavers are gone (3rd party and the ones from Apple: Hello, Message, Flurry, etc.) or at least it requires to be a Nobel Prize to find them (and the Search field is not useful). I tried to install a 3rd party screen saver on macOS Tahoe Beta 3, it doesn't show up in the list. To summarize: No public access to modern APIs AFAIK. UI that is hostile to 3rd party screen savers on macOS Sequoia. Apparently only screensavers that are slideshows or movies curated by Apple in macOS Tahoe b3. Hence the question: Is there any future for screen savers on macOS? Because if there's none, I won't waste my time trying to update some old screen savers.
3
0
578
Aug ’25
moveCharacter reports collision with itself
I'm running into an issue with collisions between two entities with a character controller component. In the collision handler for moveCharacter the collision has both hitEntity and characterEntity set to the same object. This object is the entity that was moved with moveCharacter() The below example configures 3 objects. stationary sphere with character controller falling sphere with character controller a stationary cube with a collision component if the falling sphere hits the stationary sphere then the collision handler reports both hitEntity and characterEntity to be the falling sphere. I would expect that the hitEntity would be the stationary sphere and the character entity would be the falling sphere. if the falling sphere hits the cube with a collision component the the hit entity is the cube and the characterEntity is the falling sphere as expected. Is this the expected behavior? The entities act as expected visually however if I want the spheres to react differently depending on what character they collided with then I am not getting the expected results. IE: If a player controlled character collides with a NPC then exchange resource with NPC. if player collides with enemy then take damage. import SwiftUI import RealityKit struct ContentView: View { @State var root: Entity = Entity() @State var stationary: Entity = createCharacter(named: "stationary", radius: 0.05, color: .blue) @State var falling: Entity = createCharacter(named: "falling", radius: 0.05, color: .red) @State var collisionCube: Entity = createCollisionCube(named: "cube", size: 0.1, color: .green) //relative to root @State var fallFrom: SIMD3<Float> = [0,0.5,0] var body: some View { RealityView { content in content.add(root) root.position = [0,-0.5,0.0] root.addChild(stationary) stationary.position = [0,0.05,0] root.addChild(falling) falling.position = fallFrom root.addChild(collisionCube) collisionCube.position = [0.2,0,0] collisionCube.components.set(InputTargetComponent()) } .gesture(SpatialTapGesture().targetedToAnyEntity().onEnded { tap in let tapPosition = tap.entity.position(relativeTo: root) falling.components.remove(FallComponent.self) falling.teleportCharacter(to: tapPosition + fallFrom, relativeTo: root) }) .toolbar { ToolbarItemGroup(placement: .bottomOrnament) { HStack { Button("Drop") { falling.components.set(FallComponent(speed: 0.4)) } Button("Reset") { falling.components.remove(FallComponent.self) falling.teleportCharacter(to: fallFrom, relativeTo: root) } } } } } } @MainActor func createCharacter(named name: String, radius: Float, color: UIColor) -> Entity { let character = ModelEntity(mesh: .generateSphere(radius: radius), materials: [SimpleMaterial(color: color, isMetallic: false)]) character.name = name character.components.set(CharacterControllerComponent(radius: radius, height: radius)) return character } @MainActor func createCollisionCube(named name: String, size: Float, color: UIColor) -> Entity { let cube = ModelEntity(mesh: .generateBox(size: size), materials: [SimpleMaterial(color: color, isMetallic: false)]) cube.name = name cube.generateCollisionShapes(recursive: true) return cube } struct FallComponent: Component { let speed: Float } struct FallSystem: System{ static let predicate: QueryPredicate<Entity> = .has(FallComponent.self) && .has(CharacterControllerComponent.self) static let query: EntityQuery = .init(where: predicate) let down: SIMD3<Float> = [0,-1,0] init(scene: RealityKit.Scene) { } func update(context: SceneUpdateContext) { let deltaTime = Float(context.deltaTime) for entity in context.entities(matching: Self.query, updatingSystemWhen: .rendering) { let speed = entity.components[FallComponent.self]?.speed ?? 0.5 entity.moveCharacter(by: down * speed * deltaTime, deltaTime: deltaTime, relativeTo: nil) { collision in if collision.hitEntity == collision.characterEntity { print("hit entity has collided with itself") } print("\(collision.characterEntity.name) collided with \(collision.hitEntity.name) ") } } } } #Preview(windowStyle: .volumetric) { ContentView() }
1
0
185
Aug ’25
Export Armatures from Blender to USDC for use in RealityKit
I'm an experienced SceneKit developer and I want to begin work on a new project using RealityKit. So I appreciated as timely, the WWDC 2025 Session, "Bring your SceneKit project to RealityKit". However, now I am finding that: Blender does not properly support exporting armatures in usdc files, and usdc is really the only file format that should be used for creating 3D assets for RealityKit. The option of exporting from Blender to fbx or some other intermediate format, and then converting that to usdc, is a challenge. Apple's Reality Converter App, which supposedly can support importing and converting fbx files to usdc, is no longer available from Apple's website. And an older copy of it I found at the Kodeco website requires Rosetta on Apple Silicon. As well, this older copy does not in fact import fbx or anything else - I find it doesn't work at all. Apple's Reality Composer Pro, at least as far as I can tell, only supports importing usdc - it is not a file conversion tool. Alternatively, I am under the impression that Maya supports producing usdc files with armatures, but Maya costs over $2000 per year and I am skilled with Blender, so I believe strongly that I should be able to continue with Blender. Maya's expense and skillset simply shouldn't be a requirement for building RealityKit applications. What are my options then, if any, to produce assets with armatures and armature based animations using Blender, and then bring them into RealityKit?
0
4
286
Jun ’25
OS choosing performance state poorly for GPU use case
I am building a MacOS desktop app (https://anukari.com) that is using Metal compute to do real-time audio/DSP processing, as I have a problem that is highly parallelizable and too computationally expensive for the CPU. However it seems that the way in which I am using the GPU, even when my app is fully compute-limited, the OS never increases the power/performance state. Because this is a real-time audio synthesis application, it's a huge problem to not be able to take advantage of the full clock speeds that the GPU is capable of, because the app can't keep up with real-time. I discovered this issue while profiling the app using Instrument's Metal tracing (and Game tracing) modes. In the profiling configuration under "Metal Application" there is a drop-down to select the "Performance State." If I run the application under Instruments with Performance State set to Maximum, it runs amazingly well, and all my problems go away. For comparison, when I run the app on its own, outside of Instruments, the expensive GPU computation it's doing takes around 2x as long to complete, meaning that the app performs half as well. I've done a ton of work to micro-optimize my Metal compute code, based on every scrap of information from the WWDC videos, etc. A problem I'm running into is that I think that the more efficient I make my code, the less it signals to the OS that I want high GPU clock speeds! I think part of why the OS is confused is that in most use cases, my computation can be done using only a small number of Metal threadgroups. I'm guessing that the OS heuristics see that only a small fraction of the GPU is saturated and fail to scale up the power/clock state. I'm not sure what to do here; I'm in a bit of a bind. One possibility is that I intentionally schedule busy work -- spin threadgroups just to waste energy and signal to the OS that I need higher clock speeds. This is obviously a really bad idea, but it might work. Is there any other (better) way for my app to signal to the OS that it is doing real-time latency-sensitive computation on the GPU and needs the clock speeds to be scaled up? Note that game mode is not really an option, as my app also runs as an AU plugin inside hosts like Garageband, so it can't be made fullscreen, etc.
6
0
991
May ’25
Monthly recurring leaderboard and placement achievement?
I would like a monthly recurring leaderboard, but the most days one can set for the recurring leaderboard is 30, and some months have 31 days (or 28/29). This is dumb. I guess I have to manually reset a classic leaderboard each month to get this result? Additionally once it closes and is about to reset (I also have daily recurring leaderboards), I'd like to grant the top placers on the leaderboard a corresponding achievement, but I don't see any way of doing this. I believe I can do all these things on PlayFab, but it'll take a bit more work, and eventually cost. Any one have advise?
1
0
209
Sep ’25
ShaderGraphMaterial.getParameter(handle:) always return nil, is this expected behavior?
I've loaded a ShaderGraphMaterial from a RealityKit content bundle and I'm attempting to access the initial values of its parameters using getParameter(handle:), but this method appears to always return nil: let shaderGraphMaterial = try await ShaderGraphMaterial(named: "MyMaterial", from: "MyFile") let namedParameterValue = shaderGraphMaterial.getParameter(name: "myParameter") // This prints the value of the `myParameter` parameter, as expected. print("namedParameterValue = \(namedParameterValue)") let handle = ShaderGraphMaterial.parameterHandle(name: "myParameter") let handleParameterValue = shaderGraphMaterial.getParameter(handle: handle) // Expected behavior: prints the value of the `myParameter` parameter, as above. // Observed behavior: prints `nil`. print("handleParameterValue = \(handleParameterValue)") Is this expected behavior? Based on the documentation at https://developer.apple.com/documentation/realitykit/shadergraphmaterial/getparameter(handle:) I'd expect getParameter(handle:) to return the value of the parameter, just as getParameter(name:) does. I've tested this on iOS 18.5 and iOS 26.0 beta 2. Assuming this getParameter(handle:) works as designed, is the following ShaderGraphMaterial extension an appropriate workaround, or can you recommend a better approach? Thank you. public extension ShaderGraphMaterial { /// Reassigns the values of all named material parameters using the handle-based API. /// /// This works around an issue where, at least as of RealityKit 26.0 beta 2 and /// earlier, `getParameter(handle:)` will always return `nil` when used to read the /// initial value of a shader graph material parameter read using /// `ShaderGraphMaterial(named:from:in:)`, whereas `getParameter(name:)` will work /// as expected. private mutating func copyNamedParametersToHandles() { for parameterName in self.parameterNames { if let value = self.getParameter(name: parameterName) { let handle = ShaderGraphMaterial.parameterHandle(name: parameterName) do { try self.setParameter(handle: handle, value: value) } catch { assertionFailure("Cannot set parameter value") } } } } }
1
0
544
Jun ’25
Inquiry About Game Center Integration Analytics
Dear Apple Developer Support, I hope this message finds you well. I am a game developer looking to integrate Game Center into our game. Before proceeding, I would like to understand the analytical capabilities available post-integration. Specifically, I am interested in tracking detailed metrics such as: The number of new player downloads driven by Game Center features (e.g., friend challenges, leaderboards, or achievements). Data on user engagement and conversions originating from Game Center interactions. I have explored App Store Connect’s App Analytics but would appreciate clarification on whether Game Center-specific data (e.g., referrals from challenges or social features) is available to measure growth and optimize our strategies. If such data is accessible, could you guide me on how to view it? If not, are there alternative methods or plans to incorporate this in the future? Thank you for your time and assistance. I look forward to your response. Best regards, Bella
1
0
992
Sep ’25
Game Center Authentication Crashing - Unity 6, Gamekit 3.0.2
When testing my development build for gamecenter authentication, the game crashes. I've breadcrumbed it to the "await GKLocalPlayer.Authenticate();" call. Can't find any documentation on this issue and have been looking through the forums! I've already done all of the usual stuff like verifying bundle identifiers match, ensuring game center is enabled for the app, setting up app store connect, using a sandbox account, etc... Please point me to some resources if you know any. Any help is appreciated, I'm starting to lose hope here!
2
0
270
Apr ’25
iOS 26 Games app: Wired Switch Pro controllers (and GameSir X5 Lite) not working correctly
Hi, Since iOS 26 introduced the new Games app, I’ve noticed a problem when using a Nintendo Switch Pro Controller in wired USB-C mode, and also with third-party controllers that emulate it (like the GameSir X5 Lite). In the Games app interface, only the L/R buttons respond, but the D-Pad and analog sticks don’t work at all. Once inside actual games, the controller works fine — the issue only affects the Games app UI. What I’ve tested so far: Xbox / PlayStation controllers → work fine in both wired and Bluetooth, including inside the Games app. Switch Pro Controller (Bluetooth) → works fine, including in the Games app. Switch Pro Controller (wired) → same issue as the X5 Lite, D-Pad and sticks don’t work in the Games app. This makes it hard to use the new Games app launcher with these controllers, even though they work perfectly once a game is launched. My question: is this an iOS bug (Apple needs to add proper support for wired Switch Pro controllers in the Games app), or something that Nintendo / GameSir would need to address? Thanks in advance to anyone who can confirm this or provide more info.
2
0
691
Sep ’25
Unable to package in UE5.6
Im new in the Mac area but for sure not UE. Windows is a long process to packaging but it could be done. All the documentation for Epic and from the internet is basically non existent with exactly how to package a project within UE. I have Xcode installed which makes sense, agreed to terms and install for MacOS, I've been able to make a project for several weeks now and want to package for a test run for my friends to play on Windows. Now I just get this in the log: UATHelper: Packaging (Mac): ERROR: Failed to finalize the .app with Xcode. Check the log for more information UATHelper: Packaging (Mac): Trace written to file /Users/rileysleger/Library/Logs/Unreal Engine/LocalBuildLogs/UBA-ProjectNightTerror-Mac-Development.uba with size 12.6kb UATHelper: Packaging (Mac): Total time in Unreal Build Accelerator local executor: 8.12 seconds UATHelper: Packaging (Mac): Result: Failed (OtherCompilationError) UATHelper: Packaging (Mac): Total execution time: 9.71 seconds PackagingResults: Error: Failed to finalize the .app with Xcode. Check the log for more information UATHelper: Packaging (Mac): Took 9.77s to run dotnet, ExitCode=6 UATHelper: Packaging (Mac): UnrealBuildTool failed. See log for more details. (/Users/rileysleger/Library/Logs/Unreal Engine/LocalBuildLogs/UBA-ProjectNightTerror-Mac-Development.txt) UATHelper: Packaging (Mac): AutomationTool executed for 0h 0m 10s UATHelper: Packaging (Mac): AutomationTool exiting with ExitCode=6 (6) UATHelper: Packaging (Mac): RunUAT ERROR: AutomationTool was unable to run successfully. Exited with code: 6 PackagingResults: Error: AutomationTool was unable to run successfully. Exited with code: 6 PackagingResults: Error: Unknown Error This absolutely makes no sense to me. Anyone have ideas?
2
0
301
Jul ’25
Trouble with MDLMesh.newBox()
I'm trying to build an MDLMesh then add normals let mdlMesh = MDLMesh.newBox(withDimensions: SIMD3<Float>(1, 1, 1), segments: SIMD3<UInt32>(2, 2, 2), geometryType: MDLGeometryType.triangles, inwardNormals:false, allocator: allocator) mdlMesh.addNormals(withAttributeNamed: MDLVertexAttributeNormal, creaseThreshold: 0) When I render the mesh, some normals are (0,0,0). I don't know if the problem is in the mesh, or in the conversion to MTKMesh. Is there a way to examine an MDLMesh with the geometry viewer? When I look at the variable values for my mdlMesh I get this: Not too useful. I don't know how to track down the normals. What's the best way to find out where the normals getting broken?
1
0
182
May ’25
Metal fails to create PSO on AMD based GPUs
Hello, Shaders in our application is written using HLSL and we rely on Metal Shader Converter to convert DXIL to Metal IR. We ran into an issue that causes metal pipeline state creation to fail when vertex stage-in function is used on AMD GPUs. Here's the error reported by Metal in Xcode output: Compiler failed with XPC_ERROR_CONNECTION_INTERRUPTED XPC_ERROR_CONNECTION_INTERRUPTED MTLCompiler: Compilation failed with XPC_ERROR_CONNECTION_INTERRUPTED on 4 try. This error suggests an unexpected interruption in the connection. Possible reasons: a crash in the compiler service, termination by the OS due to resource constraints (e.g., jetsam), a timeout in the service, or an issue with IPC. Verify system stability and check the logs for more details. Compiler failed with XPC_ERROR_CONNECTION_INVALID XPC_ERROR_CONNECTION_INVALID MTLCompiler: Compiler encountered XPC_ERROR_CONNECTION_INVALID: failed to check-in, peer may have been unloaded: mach_error=10000003 (is the OS shutting down or process jetsammed?) Compilation failed due to an interrupted connection: XPC_ERROR_CONNECTION_INTERRUPTED. This error occurred after multiple retries. which seems to indicate a internal compiler error. I have a minimal repro here: https://github.com/kcloudy0717/metal_pso_fail/tree/main, simply follow the instructions in README.
1
0
216
Sep ’25
Bug Report - Incorrect trackingAreaIdentifier in visionOS 26 Hover Effect Sample Code
Description: In the official visionOS 26 Hover Effect sample code project , I encountered an issue where the event.trackingAreaIdentifier returned by onSpatialEvent does not reset as expected. Steps to Reproduce: Select an object with trackingAreaID = 6 in the sample app. Look at a blank space (outside any tracking area) and perform a pinch gesture . Expected Behavior: The event.trackingAreaIdentifier should return 0 when interacting with a non-tracking area. Actual Behavior: The event.trackingAreaIdentifier still returns 6, even after restarting the app or killing the process. This persists regardless of where the pinch gesture is performed
3
0
301
Jul ’25
iOS Simulator can only render 1 RealityView
I'm using RealityView in my iOS game mxied with SwiftUI. For the following 2 example usages, the simulator will only render the first RealityView, and the second one is either super laggy or show a black model. Running on the real device is all good, just simualtor has this issue. Have a TabView and each tab has a RealityView. Have a root view and detail view connected via a push navigation, both root and detail have a RealityView. In the Simulator, the second RealityView is going to be very choppy and basically unusable, but on a real iPhone everything looks great. Is this a known simulator issue or I did something bad?
Replies
0
Boosts
0
Views
146
Activity
Jun ’25
Utilizing Point Cloud data from `ObjectCaptureSession` in WWDC23
I am currently developing a mobile and server-side application using the new ObjectCaptureSession on iOS and PhotogrammetrySession on MacOS. I have two questions regarding the newly updated APIs. From WWDC23 session: "Meet Object Capture for iOS", I know that the Object Capture API uses Point Cloud data captured from iPhone LiDAR sensor. I want to know how to use the Point Cloud data captured on iPhone ObjectCaptureSession and use it to create 3D models on PhotogrammetrySession on MacOS. From the example code from WWDC21, I know that the PhotogrammetrySession utilizes depth map from captured photo images by embedding it into the HEIC image and use those data to create a 3D asset on PhotogrammetrySession on MacOS. I would like to know if Point Cloud data is also embedded into the image to be used during 3D reconstruction and if not, how else the Point Cloud data is inserted to be used during reconstruction. Another question is, I know that Point Cloud data is returned as a result from request to the PhtogrammetrySession.Request. I would like to know if this PointCloud data is the same set of data captured during ObjectCaptureSession from WWDC23 that is used to create ObjectCapturePointCloudView. Thank you to everyone for the help in advance. It's a real pleasure to be developing with all the updates to RealityKit and the Object Capture API.
Replies
6
Boosts
0
Views
2.3k
Activity
Jul ’25
How to obtain frame rate for iOS proMotion devices
Due to the release of ProMotion devices, the system may switch frame rates in certain scenarios, resulting in the loss of reference value for data collected through CADisplayLink callbacks at a fixed 60Hz frame rate. We cannot distinguish whether the slow callback of CADisplayLink is due to a stutter or a system switch in frame rate. I know Hitch Time Ratio, but I can't use this scheme for some reasons. How can I distinguish between stuck and frame rate gear shift in CADisplaylink callback? In iOS 15, CADisplayLink.preferredFrameRateRange.preferred always returns 0, while minimum and maximum do change. Can I use these minimum and maximum range values as criteria to distinguish between frame rate switching and stuttering?
Replies
1
Boosts
0
Views
164
Activity
May ’25
Distortion Artifacts on VisionOS When Rendering Opaque/Alpha Clipped Foliage in URP (Unity 6.0, Metal)
I'm running into a persistent visual issue while deploying a floral corridor scene to Apple Vision Pro using Unity 6.0 with URP and Metal. The issue only appears on the Vision Pro device — everything looks fine in the Unity Editor. Issue Description When the frame rate drops to around 60–70 FPS, noticeable distortion artifacts appear around the edges of foliage models. It seems like the background meshes (behind the plants) get warped and leak through the edges of the foliage. Although this is most visible around the leaves, even solid objects like standard URP wall or box models show distorted edges when the issue occurs. All the foliage uses Opaque or Alpha Clipping materials. Things I've Tried Changing the foliage materials to Transparent mode —distortion around edges disappears, but using Transparent for a large number of foliage assets is not ideal for performance or sorting complexity. Reducing the number of foliage objects — with only a few plants in the scene and the frame rate staying around 100 FPS, the distortion disappears. However, this isn’t a practical solution for a full environment. Possible Cause? I came across this note in the Unity documentation: "Ensure depth-buffer for each pixel is non-zero - on visionOS, the depth buffer is used for reprojection. To ensure visual effects like skyboxes and shaders are displayed beautifully, ensure that some value is written to the depth for each pixel." Could this be related to the issue? Is it possible that Alpha Clipping with low pixel coverage leads to some pixels not writing to the depth buffer, which then causes problems during Vision Pro’s reprojection or foveated rendering? However, even when I disable Alpha Clipping entirely, the distortion issue still persists, so it may not be solely caused by clipping itself. Project Setup Unity 6.0 (URP) Depth Texture: Enable Using Metal as the graphics backend Running on real Vision Pro hardware (not simulator) Any advice on how to avoid these distortion issues on Vision Pro would be greatly appreciated. Thanks!
Replies
1
Boosts
0
Views
156
Activity
Jul ’25
Spatial Scene API for iOS Apps
As part of the WWDC25 Keynote, a technology was announced that can present 2D images as 3D spatial scenes. This announcement is supported by a Press Release. ...developers can use the Spatial Scene API to make their app experience even more immersive. Zillow is taking advantage of the API for their Zillow Immersive app, allowing users to see images of homes and apartments with the rich depth and dimension that spatial scenes offer. The feature also appears in the Photos App on iOS 26 Developer Beta 1. Tapping "Spatial Scene" on any photo opens a view of that photo with a parallax effect. I've searched the WWDC sessions and new documentation and have come up short. Reaching out here for help. Is there any documentation for Spatial Scene API? Or any guidance on how to implement the spatial scene in iOS?
Replies
1
Boosts
2
Views
371
Activity
Jun ’25
Is there any future for screensavers on macOS?
I haven't been looking at screensavers for a long time because of Apple's lack of will (or resources?) to provide a public version of the private modern SDK used by Apple for a very long time now. I'm now looking at the Screen Saver pane in System Settings (the What-If version of System Preferences in an alternate universe where all screens are in portrait mode). In macOS Sequoia, it seems like 3rd party screensavers are not welcome considering that they are relegated to the "Other" section at the bottom of the list and you have to click Show All to start seeing 3rd party screen savers. I also had a quick look at macOS Tahoe Beta 3 and it looks like that all the real screensavers are gone (3rd party and the ones from Apple: Hello, Message, Flurry, etc.) or at least it requires to be a Nobel Prize to find them (and the Search field is not useful). I tried to install a 3rd party screen saver on macOS Tahoe Beta 3, it doesn't show up in the list. To summarize: No public access to modern APIs AFAIK. UI that is hostile to 3rd party screen savers on macOS Sequoia. Apparently only screensavers that are slideshows or movies curated by Apple in macOS Tahoe b3. Hence the question: Is there any future for screen savers on macOS? Because if there's none, I won't waste my time trying to update some old screen savers.
Replies
3
Boosts
0
Views
578
Activity
Aug ’25
moveCharacter reports collision with itself
I'm running into an issue with collisions between two entities with a character controller component. In the collision handler for moveCharacter the collision has both hitEntity and characterEntity set to the same object. This object is the entity that was moved with moveCharacter() The below example configures 3 objects. stationary sphere with character controller falling sphere with character controller a stationary cube with a collision component if the falling sphere hits the stationary sphere then the collision handler reports both hitEntity and characterEntity to be the falling sphere. I would expect that the hitEntity would be the stationary sphere and the character entity would be the falling sphere. if the falling sphere hits the cube with a collision component the the hit entity is the cube and the characterEntity is the falling sphere as expected. Is this the expected behavior? The entities act as expected visually however if I want the spheres to react differently depending on what character they collided with then I am not getting the expected results. IE: If a player controlled character collides with a NPC then exchange resource with NPC. if player collides with enemy then take damage. import SwiftUI import RealityKit struct ContentView: View { @State var root: Entity = Entity() @State var stationary: Entity = createCharacter(named: "stationary", radius: 0.05, color: .blue) @State var falling: Entity = createCharacter(named: "falling", radius: 0.05, color: .red) @State var collisionCube: Entity = createCollisionCube(named: "cube", size: 0.1, color: .green) //relative to root @State var fallFrom: SIMD3<Float> = [0,0.5,0] var body: some View { RealityView { content in content.add(root) root.position = [0,-0.5,0.0] root.addChild(stationary) stationary.position = [0,0.05,0] root.addChild(falling) falling.position = fallFrom root.addChild(collisionCube) collisionCube.position = [0.2,0,0] collisionCube.components.set(InputTargetComponent()) } .gesture(SpatialTapGesture().targetedToAnyEntity().onEnded { tap in let tapPosition = tap.entity.position(relativeTo: root) falling.components.remove(FallComponent.self) falling.teleportCharacter(to: tapPosition + fallFrom, relativeTo: root) }) .toolbar { ToolbarItemGroup(placement: .bottomOrnament) { HStack { Button("Drop") { falling.components.set(FallComponent(speed: 0.4)) } Button("Reset") { falling.components.remove(FallComponent.self) falling.teleportCharacter(to: fallFrom, relativeTo: root) } } } } } } @MainActor func createCharacter(named name: String, radius: Float, color: UIColor) -> Entity { let character = ModelEntity(mesh: .generateSphere(radius: radius), materials: [SimpleMaterial(color: color, isMetallic: false)]) character.name = name character.components.set(CharacterControllerComponent(radius: radius, height: radius)) return character } @MainActor func createCollisionCube(named name: String, size: Float, color: UIColor) -> Entity { let cube = ModelEntity(mesh: .generateBox(size: size), materials: [SimpleMaterial(color: color, isMetallic: false)]) cube.name = name cube.generateCollisionShapes(recursive: true) return cube } struct FallComponent: Component { let speed: Float } struct FallSystem: System{ static let predicate: QueryPredicate<Entity> = .has(FallComponent.self) && .has(CharacterControllerComponent.self) static let query: EntityQuery = .init(where: predicate) let down: SIMD3<Float> = [0,-1,0] init(scene: RealityKit.Scene) { } func update(context: SceneUpdateContext) { let deltaTime = Float(context.deltaTime) for entity in context.entities(matching: Self.query, updatingSystemWhen: .rendering) { let speed = entity.components[FallComponent.self]?.speed ?? 0.5 entity.moveCharacter(by: down * speed * deltaTime, deltaTime: deltaTime, relativeTo: nil) { collision in if collision.hitEntity == collision.characterEntity { print("hit entity has collided with itself") } print("\(collision.characterEntity.name) collided with \(collision.hitEntity.name) ") } } } } #Preview(windowStyle: .volumetric) { ContentView() }
Replies
1
Boosts
0
Views
185
Activity
Aug ’25
Export Armatures from Blender to USDC for use in RealityKit
I'm an experienced SceneKit developer and I want to begin work on a new project using RealityKit. So I appreciated as timely, the WWDC 2025 Session, "Bring your SceneKit project to RealityKit". However, now I am finding that: Blender does not properly support exporting armatures in usdc files, and usdc is really the only file format that should be used for creating 3D assets for RealityKit. The option of exporting from Blender to fbx or some other intermediate format, and then converting that to usdc, is a challenge. Apple's Reality Converter App, which supposedly can support importing and converting fbx files to usdc, is no longer available from Apple's website. And an older copy of it I found at the Kodeco website requires Rosetta on Apple Silicon. As well, this older copy does not in fact import fbx or anything else - I find it doesn't work at all. Apple's Reality Composer Pro, at least as far as I can tell, only supports importing usdc - it is not a file conversion tool. Alternatively, I am under the impression that Maya supports producing usdc files with armatures, but Maya costs over $2000 per year and I am skilled with Blender, so I believe strongly that I should be able to continue with Blender. Maya's expense and skillset simply shouldn't be a requirement for building RealityKit applications. What are my options then, if any, to produce assets with armatures and armature based animations using Blender, and then bring them into RealityKit?
Replies
0
Boosts
4
Views
286
Activity
Jun ’25
iPhoneで画面にリフレッシュレートを表示させる方法について
iPhone(14 Pro Max)で端末の画面にリフレッシュレートを表示させたいのですが、どなたか方法をご存知ないでしょうか?
Replies
0
Boosts
0
Views
500
Activity
Aug ’25
OS choosing performance state poorly for GPU use case
I am building a MacOS desktop app (https://anukari.com) that is using Metal compute to do real-time audio/DSP processing, as I have a problem that is highly parallelizable and too computationally expensive for the CPU. However it seems that the way in which I am using the GPU, even when my app is fully compute-limited, the OS never increases the power/performance state. Because this is a real-time audio synthesis application, it's a huge problem to not be able to take advantage of the full clock speeds that the GPU is capable of, because the app can't keep up with real-time. I discovered this issue while profiling the app using Instrument's Metal tracing (and Game tracing) modes. In the profiling configuration under "Metal Application" there is a drop-down to select the "Performance State." If I run the application under Instruments with Performance State set to Maximum, it runs amazingly well, and all my problems go away. For comparison, when I run the app on its own, outside of Instruments, the expensive GPU computation it's doing takes around 2x as long to complete, meaning that the app performs half as well. I've done a ton of work to micro-optimize my Metal compute code, based on every scrap of information from the WWDC videos, etc. A problem I'm running into is that I think that the more efficient I make my code, the less it signals to the OS that I want high GPU clock speeds! I think part of why the OS is confused is that in most use cases, my computation can be done using only a small number of Metal threadgroups. I'm guessing that the OS heuristics see that only a small fraction of the GPU is saturated and fail to scale up the power/clock state. I'm not sure what to do here; I'm in a bit of a bind. One possibility is that I intentionally schedule busy work -- spin threadgroups just to waste energy and signal to the OS that I need higher clock speeds. This is obviously a really bad idea, but it might work. Is there any other (better) way for my app to signal to the OS that it is doing real-time latency-sensitive computation on the GPU and needs the clock speeds to be scaled up? Note that game mode is not really an option, as my app also runs as an AU plugin inside hosts like Garageband, so it can't be made fullscreen, etc.
Replies
6
Boosts
0
Views
991
Activity
May ’25
Monthly recurring leaderboard and placement achievement?
I would like a monthly recurring leaderboard, but the most days one can set for the recurring leaderboard is 30, and some months have 31 days (or 28/29). This is dumb. I guess I have to manually reset a classic leaderboard each month to get this result? Additionally once it closes and is about to reset (I also have daily recurring leaderboards), I'd like to grant the top placers on the leaderboard a corresponding achievement, but I don't see any way of doing this. I believe I can do all these things on PlayFab, but it'll take a bit more work, and eventually cost. Any one have advise?
Replies
1
Boosts
0
Views
209
Activity
Sep ’25
ShaderGraphMaterial.getParameter(handle:) always return nil, is this expected behavior?
I've loaded a ShaderGraphMaterial from a RealityKit content bundle and I'm attempting to access the initial values of its parameters using getParameter(handle:), but this method appears to always return nil: let shaderGraphMaterial = try await ShaderGraphMaterial(named: "MyMaterial", from: "MyFile") let namedParameterValue = shaderGraphMaterial.getParameter(name: "myParameter") // This prints the value of the `myParameter` parameter, as expected. print("namedParameterValue = \(namedParameterValue)") let handle = ShaderGraphMaterial.parameterHandle(name: "myParameter") let handleParameterValue = shaderGraphMaterial.getParameter(handle: handle) // Expected behavior: prints the value of the `myParameter` parameter, as above. // Observed behavior: prints `nil`. print("handleParameterValue = \(handleParameterValue)") Is this expected behavior? Based on the documentation at https://developer.apple.com/documentation/realitykit/shadergraphmaterial/getparameter(handle:) I'd expect getParameter(handle:) to return the value of the parameter, just as getParameter(name:) does. I've tested this on iOS 18.5 and iOS 26.0 beta 2. Assuming this getParameter(handle:) works as designed, is the following ShaderGraphMaterial extension an appropriate workaround, or can you recommend a better approach? Thank you. public extension ShaderGraphMaterial { /// Reassigns the values of all named material parameters using the handle-based API. /// /// This works around an issue where, at least as of RealityKit 26.0 beta 2 and /// earlier, `getParameter(handle:)` will always return `nil` when used to read the /// initial value of a shader graph material parameter read using /// `ShaderGraphMaterial(named:from:in:)`, whereas `getParameter(name:)` will work /// as expected. private mutating func copyNamedParametersToHandles() { for parameterName in self.parameterNames { if let value = self.getParameter(name: parameterName) { let handle = ShaderGraphMaterial.parameterHandle(name: parameterName) do { try self.setParameter(handle: handle, value: value) } catch { assertionFailure("Cannot set parameter value") } } } } }
Replies
1
Boosts
0
Views
544
Activity
Jun ’25
Inquiry About Game Center Integration Analytics
Dear Apple Developer Support, I hope this message finds you well. I am a game developer looking to integrate Game Center into our game. Before proceeding, I would like to understand the analytical capabilities available post-integration. Specifically, I am interested in tracking detailed metrics such as: The number of new player downloads driven by Game Center features (e.g., friend challenges, leaderboards, or achievements). Data on user engagement and conversions originating from Game Center interactions. I have explored App Store Connect’s App Analytics but would appreciate clarification on whether Game Center-specific data (e.g., referrals from challenges or social features) is available to measure growth and optimize our strategies. If such data is accessible, could you guide me on how to view it? If not, are there alternative methods or plans to incorporate this in the future? Thank you for your time and assistance. I look forward to your response. Best regards, Bella
Replies
1
Boosts
0
Views
992
Activity
Sep ’25
Game Center Authentication Crashing - Unity 6, Gamekit 3.0.2
When testing my development build for gamecenter authentication, the game crashes. I've breadcrumbed it to the "await GKLocalPlayer.Authenticate();" call. Can't find any documentation on this issue and have been looking through the forums! I've already done all of the usual stuff like verifying bundle identifiers match, ensuring game center is enabled for the app, setting up app store connect, using a sandbox account, etc... Please point me to some resources if you know any. Any help is appreciated, I'm starting to lose hope here!
Replies
2
Boosts
0
Views
270
Activity
Apr ’25
iOS 26 Games app: Wired Switch Pro controllers (and GameSir X5 Lite) not working correctly
Hi, Since iOS 26 introduced the new Games app, I’ve noticed a problem when using a Nintendo Switch Pro Controller in wired USB-C mode, and also with third-party controllers that emulate it (like the GameSir X5 Lite). In the Games app interface, only the L/R buttons respond, but the D-Pad and analog sticks don’t work at all. Once inside actual games, the controller works fine — the issue only affects the Games app UI. What I’ve tested so far: Xbox / PlayStation controllers → work fine in both wired and Bluetooth, including inside the Games app. Switch Pro Controller (Bluetooth) → works fine, including in the Games app. Switch Pro Controller (wired) → same issue as the X5 Lite, D-Pad and sticks don’t work in the Games app. This makes it hard to use the new Games app launcher with these controllers, even though they work perfectly once a game is launched. My question: is this an iOS bug (Apple needs to add proper support for wired Switch Pro controllers in the Games app), or something that Nintendo / GameSir would need to address? Thanks in advance to anyone who can confirm this or provide more info.
Replies
2
Boosts
0
Views
691
Activity
Sep ’25
Unable to package in UE5.6
Im new in the Mac area but for sure not UE. Windows is a long process to packaging but it could be done. All the documentation for Epic and from the internet is basically non existent with exactly how to package a project within UE. I have Xcode installed which makes sense, agreed to terms and install for MacOS, I've been able to make a project for several weeks now and want to package for a test run for my friends to play on Windows. Now I just get this in the log: UATHelper: Packaging (Mac): ERROR: Failed to finalize the .app with Xcode. Check the log for more information UATHelper: Packaging (Mac): Trace written to file /Users/rileysleger/Library/Logs/Unreal Engine/LocalBuildLogs/UBA-ProjectNightTerror-Mac-Development.uba with size 12.6kb UATHelper: Packaging (Mac): Total time in Unreal Build Accelerator local executor: 8.12 seconds UATHelper: Packaging (Mac): Result: Failed (OtherCompilationError) UATHelper: Packaging (Mac): Total execution time: 9.71 seconds PackagingResults: Error: Failed to finalize the .app with Xcode. Check the log for more information UATHelper: Packaging (Mac): Took 9.77s to run dotnet, ExitCode=6 UATHelper: Packaging (Mac): UnrealBuildTool failed. See log for more details. (/Users/rileysleger/Library/Logs/Unreal Engine/LocalBuildLogs/UBA-ProjectNightTerror-Mac-Development.txt) UATHelper: Packaging (Mac): AutomationTool executed for 0h 0m 10s UATHelper: Packaging (Mac): AutomationTool exiting with ExitCode=6 (6) UATHelper: Packaging (Mac): RunUAT ERROR: AutomationTool was unable to run successfully. Exited with code: 6 PackagingResults: Error: AutomationTool was unable to run successfully. Exited with code: 6 PackagingResults: Error: Unknown Error This absolutely makes no sense to me. Anyone have ideas?
Replies
2
Boosts
0
Views
301
Activity
Jul ’25
immersive scene blinking on nearby experience on app
after launching a nearby exoerience on quick look or inside our app, all the user in the group watch sometimes teh model blinking abd becoming transparet... ... just one user hasnt the issue, either the one who launched shareplay or the user who force align the immersive space in front weird
Replies
0
Boosts
0
Views
133
Activity
Sep ’25
Trouble with MDLMesh.newBox()
I'm trying to build an MDLMesh then add normals let mdlMesh = MDLMesh.newBox(withDimensions: SIMD3<Float>(1, 1, 1), segments: SIMD3<UInt32>(2, 2, 2), geometryType: MDLGeometryType.triangles, inwardNormals:false, allocator: allocator) mdlMesh.addNormals(withAttributeNamed: MDLVertexAttributeNormal, creaseThreshold: 0) When I render the mesh, some normals are (0,0,0). I don't know if the problem is in the mesh, or in the conversion to MTKMesh. Is there a way to examine an MDLMesh with the geometry viewer? When I look at the variable values for my mdlMesh I get this: Not too useful. I don't know how to track down the normals. What's the best way to find out where the normals getting broken?
Replies
1
Boosts
0
Views
182
Activity
May ’25
Metal fails to create PSO on AMD based GPUs
Hello, Shaders in our application is written using HLSL and we rely on Metal Shader Converter to convert DXIL to Metal IR. We ran into an issue that causes metal pipeline state creation to fail when vertex stage-in function is used on AMD GPUs. Here's the error reported by Metal in Xcode output: Compiler failed with XPC_ERROR_CONNECTION_INTERRUPTED XPC_ERROR_CONNECTION_INTERRUPTED MTLCompiler: Compilation failed with XPC_ERROR_CONNECTION_INTERRUPTED on 4 try. This error suggests an unexpected interruption in the connection. Possible reasons: a crash in the compiler service, termination by the OS due to resource constraints (e.g., jetsam), a timeout in the service, or an issue with IPC. Verify system stability and check the logs for more details. Compiler failed with XPC_ERROR_CONNECTION_INVALID XPC_ERROR_CONNECTION_INVALID MTLCompiler: Compiler encountered XPC_ERROR_CONNECTION_INVALID: failed to check-in, peer may have been unloaded: mach_error=10000003 (is the OS shutting down or process jetsammed?) Compilation failed due to an interrupted connection: XPC_ERROR_CONNECTION_INTERRUPTED. This error occurred after multiple retries. which seems to indicate a internal compiler error. I have a minimal repro here: https://github.com/kcloudy0717/metal_pso_fail/tree/main, simply follow the instructions in README.
Replies
1
Boosts
0
Views
216
Activity
Sep ’25
Bug Report - Incorrect trackingAreaIdentifier in visionOS 26 Hover Effect Sample Code
Description: In the official visionOS 26 Hover Effect sample code project , I encountered an issue where the event.trackingAreaIdentifier returned by onSpatialEvent does not reset as expected. Steps to Reproduce: Select an object with trackingAreaID = 6 in the sample app. Look at a blank space (outside any tracking area) and perform a pinch gesture . Expected Behavior: The event.trackingAreaIdentifier should return 0 when interacting with a non-tracking area. Actual Behavior: The event.trackingAreaIdentifier still returns 6, even after restarting the app or killing the process. This persists regardless of where the pinch gesture is performed
Replies
3
Boosts
0
Views
301
Activity
Jul ’25