I do not understand how offline leaderboard submission is supposed to work in Game Kit: While the documentation briefly states that offline submission is supported, how is that even possible when you first have to fetch a leaderboard object in order to then call its submitScore function? How can I get the leaderboard object in the first place when offline? Can anyone enlighten me how this works? Or maybe point me to some relevant documentation?

I'm updating an existing distributed game to add turn-based matches. When the Matchmaker ViewController Info Button next to a game is pressed, the results vary: iOS 15.x - Button under avatar says "Accept Invite" or "View Game" (depending on if invite has already been accepted) iOS 18.x - Button always says "App Store" - I assume that means it would lead one to the App store to install the game. Both devices (iPad 15.x and iPhone 18.x) have the same version of the game installed. The results are the same when running in the simulator. When the game is released, I assume this button will work properly, no?

In my game 854159268 (com.1791entertainment.qugame), in my quMostRecent3 leaderboard, the top 2 entries have 'vanished'. They were there yesterday. I know these players have played today, as I see their scores on other leaderboards. Any ideas how to get these back? These 2 players (me and my tester) are both TestFlight ing - not sure if that changes things.

I'm developing a game that supports GameKit turn based matches. What I don't understand is this: Is tapping on the Game Center notification push messages the only way for the GKTurnBasedEventListener to trigger? What if someone misses the push message (swiping it away by accident or something like that) but still wants to join? Is there some inbox somewhere where the pending messages can be seen or fetched? Also it was mentioned in a very old WWDC video (from 2013, I think that's the latest with information about turn based matches) that the notification also includes a badge for the icon. However, I do not understand how to implement that. Is there any documentation for that?

I'm developing a turn based game. When I present the GKTurnBasedMatchmakerViewController players can opt in for automatch instead of selecting a specific friend as opponent. How exactly does the matching work if a player doesn't specify anything explicitly? Does Game Center send push notifications in a round robin fashion to all friends and the first one to accept is then matched as opponent? Is this documented somewhere?

Leaderboards working fine in iOS 26.1 but seem to be broken in 26.2 and also in the 26.3 developer beta. Players cannot submit scores and neither can they view scores on Apple's default leaderboards. Custom leaderboards that rely on pulling information using GameKit APIs also fail. Is there a workaround or patch for this?

Updated my app to include turn-based matches. Beta testing through FlightTest and all was well between iOS 18.x and 26.2 devices. One beta tester upgraded to 26.2 during beta testing and now when the MatchMaker VC is opened, it does not show existing matches. Worse, he can create new matches and play his turn, but the new match won't even show up in MMVC, even after opponent takes turn. My app has been reviewed and is ready for release, but I'd like to know how to solve this before I release. He has tried re-installing the app, including an updated FlightTest version that is the same as the about-to-be-released reviewed version.

Hello, In our game we enforce an age gate before showing Game Center sign‑in. Only after the user passes the age gate do we call GKLocalPlayer.localPlayer.authenticateHandler. The reason I’m asking is that we want to reliably detect if the game was launched from a Game Center activity in the Games app (iOS 26+). If the user prefers to enter via activities, we don’t want to miss that event during cold start. Our current proposal is: Register a GKLocalPlayerListener early in didFinishLaunchingWithOptions: so the app is ready to catch events. Queue any incoming events in our dispatcher. Only process those events after the user passes the age gate and authentication succeeds. My questions are: Does player:wantsToPlayGameActivity:completionHandler: ever fire before authentication, or only after the local player is authenticated? If it only fires after authentication, is our “register early but gate processing” approach the correct way to ensure we don’t miss activity launches? Is there any recommended pattern to distinguish “activity launch” vs. “normal launch” in this age‑gate scenario? We want to respect Apple’s age gate requirements, but also ensure activity launches are not lost if the user prefers that entry point. Sorry if this is a stupid question — I just want to be sure we’re following the right pattern. Thanks for any clarification or best‑practice guidance!

In my turn-based game, I receive GKListener event receivedTurnEventForMatch and decode the match.matchData. On occasion, the matchData is clearly stale and is from the previous turn. If I call the MatchMaker ViewController up and select that same match, the data is not stale, so it's not a matter of not calling endTurn. I have tried both loadMatchWithID and loadMatchesWithCompletionHandler after receiving the receivedTurnEventForMatch, but the data is still stale. Advice?

When trying to play with friends Krazy Krownz doesn’t allow me to click multiplayer even though my Apple Game Center connected and my friends Apple game center connected as well. I even tried sending an invite from Apple Game Center to friends and Krazy Krownz doesn’t even show up on the list of available multiplayer games. I’ve signed out and back in the same issue remain. I’ve try to contact the game developer, but the website doesn’t work.

As GKGameCenterViewController has been deprecated, it seems that GKAccessPoint is now the correct way to present the GameCentre leaderboard. But the placement options for the GKAccessPoint are very limited and lead to misaligned UI that looks clunky, as the GKAccessPoint does not align with the system navigation toolbar. Am I missing something here or am I just stuck with a lopsided UI now? I much preferred how this previously worked, where I could present the GKGameCenterViewController in a sheet from my own button

When I go to the leadership section, I have 8 currently active leaderboards. When I select "manage scores and players" I see 9 leaderboards, from which 5 are legacy and my 4 new ones are not listed (also it comes in a very old design). New players will score in the 4 new leaderboards but I need to remove the top score which was the developer score, to give them a chance, but the new leaderboards are not accessible.

Dear Apple Developer Technical Support Team, We are currently integrating Apple Search Ads attribution (SKAdNetwork / AdAttributionKit) for our application, but we have been unable to receive any attribution callbacks from Apple. We would appreciate your assistance in diagnosing this issue. App Information: App ID: 1531290216 Bundle ID: com.volvapps.tk2.cn Callback Endpoint: Our server endpoint for receiving attribution postbacks is: https://volvgames.com/.well-known/skadnetwork/report-attribution Issue Description: We have conducted multiple tests under different scenarios, but in all cases, our server has not received any callback from Apple. Test Scenarios: ① Xcode Installation Test Built and launched the app directly via Xcode. Called the following APIs within the app: SKAdNetwork registerAppForAdNetworkAttribution SKAdNetwork updateConversionValue:value Result: No callback received on our server. ②On-Device Developer Mode Test (AdAttributionKit) Enabled AdAttributionKit Developer Mode on a physical iPhone. Configured a development postback using the app’s Bundle ID. Used either the provided developer postback URL or manually entered our endpoint. Created and triggered the postback via “Send Development Postback”. Result: No callback received. ③Additional Attempts Modified the callback URL from: https://volvgames.com/.well-known/skadnetwork/report-attribution to: https://volvgames.com/ Repeated tests under both Xcode and Developer Mode environments. Also attempted triggering postbacks after calling the attribution APIs within the app. Result: Still no callback received in all cases. Additional Question: We understand that certain files may be required for review or troubleshooting. However, we were unable to find where to upload attachments when submitting this request. We would like to provide the following files for your reference: info.plist AdAttribution.mm Could you please advise how we can submit these files to assist with the investigation? We would greatly appreciate any guidance or suggestions you may have regarding this issue. Please let us know if further information is required. Thank you for your support.

Hi, I’m stuck with submitting a Game Center leaderboard and wanted to ask if others are seeing the same issue. My setup: App is already live on the App Store Game Center capability is enabled Leaderboard works perfectly in TestFlight (scores are submitted and visible) Problem: When I try to submit the leaderboard for review, I get: “A Game Center enabled app version must be added for review.” This is confusing because: The app already includes Game Center The app is already approved and published Apple documentation says Game Center components can be submitted without a new app version I also tried recreating the leaderboard and checking all settings, but the issue persists. Is this a known App Store Connect issue? Or is there something I’m missing? Thanks!

Hi All! I'm being asked to migrate an app which utilizes iCloud KVS (Key Value Storage). This ability is a new-ish feature, and the documentation about this is sparse [1]. Honestly, the entire documentation about the new iCloud transfer functionality seems to be missing. Same with Game Center / GameKit. While the docs say that it should work, I'd like to understand the process in more detail. Has anyone migrated an iCloud KVS app? What happens after the transfer goes through, but before the first release? Do I need to do anything special? I see that the Entitlements file has the TeamID in the Key Value store - is that fine? <key>com.apple.developer.ubiquity-kvstore-identifier</key> <string>$(TeamIdentifierPrefix)$(CFBundleIdentifier)</string> Can someone please share their experience? Thank you! [1] https://developer.apple.com/help/app-store-connect/transfer-an-app/overview-of-app-transfer

Hi I have attempted to find a fix for my issue via documentation online and one phone support ( not code level support ) call to no end. I could continue to try various things but would like to see if someone else has encountered this issue and a fix for it. Background: My Game app is live on App Store and has 1 classic leaderboard . I am now getting ready to submit an update to the app and it also entails adding a new recurring leaderboard. I added the leaderboard in App Store. I however have NOT uploaded my new build yet. I have also not added my leaderboards ( currently live and not live ) to any set. When I try to submit scores using GKLeaderboard.submitScore(_:context:player:leaderboardIDs:completionHandler:) to the new non-live leaderboard it works ( gives me no error ) When I try to load the scores from the new non-live leaderboard GKLeaderboard.loadLeaderboards(IDs:completionHandler:) loadEntries(for:timeScope:range:completionHandler:) it fails. Error: "leaderboardID not found" I could try ( and will ) uploading the new build to AppStore connect and associating the new leaderboard to it before testing again. try associating each leaderboard to a set Is there anything else that I should be aware of ? Thanks in advance

Hello ! We are working on a real-time 2-player online game targeting multiple Apple devices. The following issue only occurs on tvOS: When selecting matchmaking to connect with another random player, the native Game Center interface opens and begins the matchmaking process. Almost immediately after clicking "start", the following log appears in the console, and the matchmaking screen remains indefinitely without completing: Timeout while starting matching with request: <GKMatchRequestInternal 0x30d62f690> { defaultNumberOfPlayers : 0 isLateJoin : 0 localPlayerID : U:bea182d69b85f0839e3958742fbc4609 matchType : 0 maxPlayers : 2 minPlayers : 2 playerAttributes : 4294967295 playerGroup : 1 preloadedMatch : 0 recipientPlayerIDs : <__NSArrayM 0x3034ed5c0> {} recipients : <__NSArrayM 0x3034ee280> {} restrictToAutomatch : 0 version : 1 archivedSharePlayInviteeTokensFromProgrammaticInvite, inviteMessage, localizableInviteMessage, messagesBasedRecipients, properties, queueName, recipientProperties, rid, sessionToken : (null) } . Error: (null) However, as shown in the code snippet below, the task does not complete when the log appears. But when we manually cancel the matchmaking process, the "User cancel" log is correctly triggered. var gkMatchRequest = GKMatchRequest.Init(); gkMatchRequest.MinPlayers = 2; gkMatchRequest.MaxPlayers = 2; var matchRequestTask = GKMatchmakerViewController.Request(gkMatchRequest); matchRequestTask.ContinueWith(t => { Debug.LogException(t.Exception); }, TaskContinuationOptions.OnlyOnFaulted); matchRequestTask.ContinueWith(t => { Debug.Log("User cancel"); }, TaskContinuationOptions.OnlyOnCanceled); matchRequestTask.ContinueWith(t => { Debug.Log("Success"); }, TaskContinuationOptions.OnlyOnRanToCompletion); We have tested this on multiple Apple TV and network types (Wi-Fi, 5G, Ethernet), but we consistently encounter this bug along with the same log message. Could you please help us understand or resolve this issue? Thank you.

Hello, We are working on a real-time 2-player online game targeting multiple Apple devices. The following issue only occurs on tvOS: When selecting matchmaking to connect with another player, the native Game Center interface opens and begins the matchmaking process. Almost immediately, the following log appears in the console, and the matchmaking screen remains indefinitely without completing: Timeout while starting matching with request: <GKMatchRequestInternal 0x30d62f690> { defaultNumberOfPlayers : 0 isLateJoin : 0 localPlayerID : U:bea182d69b85f0839e3958742fbc4609 matchType : 0 maxPlayers : 2 minPlayers : 2 playerAttributes : 4294967295 playerGroup : 1 preloadedMatch : 0 recipientPlayerIDs : <__NSArrayM 0x3034ed5c0> {} recipients : <__NSArrayM 0x3034ee280> {} restrictToAutomatch : 0 version : 1 archivedSharePlayInviteeTokensFromProgrammaticInvite, inviteMessage, localizableInviteMessage, messagesBasedRecipients, properties, queueName, recipientProperties, rid, sessionToken : (null) } . Error: (null) However, the task does not complete when the log appears (our Debug.Log are nerver called). But if we manually cancel the matchmaking process, the "User cancel" log is correctly triggered. Here is a code snippet for the request : var gkMatchRequest = GKMatchRequest.Init(); gkMatchRequest.MinPlayers = 2; gkMatchRequest.MaxPlayers = 2; var matchRequestTask = GKMatchmakerViewController.Request(gkMatchRequest); matchRequestTask.ContinueWith(t => { Debug.LogException(t.Exception); }, TaskContinuationOptions.OnlyOnFaulted); matchRequestTask.ContinueWith(t => { Debug.LogInfo("User cancel"); }, TaskContinuationOptions.OnlyOnCanceled); matchRequestTask.ContinueWith(t => { Debug.LogInfo("Success"); }, TaskContinuationOptions.OnlyOnRanToCompletion); We have tested this on multiple devices and network types (Wi-Fi, 5G, Ethernet), but we consistently encounter this bug along with the same log message. Could you please help us understand or resolve this issue? Thank you.

This is the first time I have tried adding achievements to my games. The online documentation says: "Before you can access achievements in your code, you can configure them in Xcode and sync the configuration updates you make with App Store Connect. Begin configuring achievements by creating a GameKit configuration file. In Xcode, choose File > New > File from Template. Select GameKit File, and click Next. In the sheet that appears, enter a name for the configuration and click Create." Sounds easy - except Xcode 16.2 does not have a GameKit File as one of the Templates. Please advise on how to proceed and it would be nice if the documentation were updated.

New to achievements. I added them in App Store Connect and want to test them. Apple Documentation says this: "Before you begin testing your GameKit configuration, you need to enable Debug Mode. In Xcode, choose Product > Scheme > Edit Scheme. From the Run configuration, select Options and toggle Enable Debug Mode. To begin testing your achievement configuration, open the game Progress Manager. In Xcode, choose Debug > GameKit > Manage Game Progress." Sounds easy enough, but there is no "GameKit" under Debug in Xcode 16.2.