Prior to iOS 26.0 we were able to download specific simulator runtimes from the command line by using a command like xcodebuild -downloadPlatform iOS -buildVersion 18.0 This is described in the documentation here. This no longer works for 26.x. If I run the following command: "xcodebuild -downloadPlatform iOS -buildVersion 26.0" it fails with the following error: "Finding content... iOS 26.0 is not available for download." If I omit the -buildVersion flag it will download the latest version, currently 26.2, but if I try and specify 26.2 as the buildVersion I still get "iOS 26.2 is not available for download". This behavior has been confirmed on Xcode 26.2. Perhaps related, it appears these runtimes are also no longer being made available for download on https://developer.apple.com/download/all

How can i get a simple figma layout with minimal art into xcode

Recently I noticed that although my drive showed ~800Gb of usage, the folders within totally to around ~600Gb (and yes I was including hidden 'dot' files/folders. After some inspection I found that there are a whole set of Disk Media Images, that appear to be related to XCode simulators. Here's an extract from the command line diskutil list command: /dev/disk5 (synthesized): #: TYPE NAME SIZE IDENTIFIER 0: APFS Container Scheme - +17.6 GB disk5 Physical Store disk4s1 1: APFS Volume iOS 26.2 Simulator 17.1 GB disk5s1 /dev/disk6 (disk image): #: TYPE NAME SIZE IDENTIFIER 0: GUID_partition_scheme +14.2 GB disk6 1: Apple_APFS Container disk7 14.2 GB disk6s1 /dev/disk7 (synthesized): #: TYPE NAME SIZE IDENTIFIER 0: APFS Container Scheme - +14.2 GB disk7 Physical Store disk6s1 1: APFS Volume XROS 26.2 Simulator 13.8 GB disk7s1 /dev/disk8 (disk image): #: TYPE NAME SIZE IDENTIFIER 0: GUID_partition_scheme +17.2 GB disk8 1: Apple_APFS Container disk9 17.2 GB disk8s1 /dev/disk9 (synthesized): #: TYPE NAME SIZE IDENTIFIER 0: APFS Container Scheme - +17.2 GB disk9 Physical Store disk8s1 1: APFS Volume iOS 26.0 Simulator 16.7 GB disk9s1 /dev/disk10 (disk image): #: TYPE NAME SIZE IDENTIFIER 0: GUID_partition_scheme +8.5 GB disk10 1: Apple_APFS Container disk11 8.5 GB disk10s1 /dev/disk11 (synthesized): #: TYPE NAME SIZE IDENTIFIER 0: APFS Container Scheme - +8.5 GB disk11 Physical Store disk10s1 1: APFS Volume XROS 2.5 Simulator B... 8.2 GB disk11s1 /dev/disk12 (disk image): #: TYPE NAME SIZE IDENTIFIER 0: GUID_partition_scheme +18.0 GB disk12 1: Apple_APFS Container disk13 18.0 GB disk12s1 /dev/disk13 (synthesized): #: TYPE NAME SIZE IDENTIFIER 0: APFS Container Scheme - +18.0 GB disk13 Physical Store disk12s1 1: APFS Volume XROS 2.5 Simulator 17.5 GB disk13s1 /dev/disk14 (disk image): #: TYPE NAME SIZE IDENTIFIER 0: GUID_partition_scheme +17.6 GB disk14 1: Apple_APFS Container disk15 17.6 GB disk14s1 /dev/disk15 (synthesized): #: TYPE NAME SIZE IDENTIFIER 0: APFS Container Scheme - +17.6 GB disk15 Physical Store disk14s1 1: APFS Volume iOS 26.1 Simulator 17.1 GB disk15s1 /dev/disk16 (disk image): #: TYPE NAME SIZE IDENTIFIER 0: GUID_partition_scheme +14.1 GB disk16 1: Apple_APFS Container disk17 14.1 GB disk16s1 /dev/disk17 (synthesized): #: TYPE NAME SIZE IDENTIFIER 0: APFS Container Scheme - +14.1 GB disk17 Physical Store disk16s1 1: APFS Volume XROS 26.1 Simulator 13.7 GB disk17s1 /dev/disk18 (disk image): #: TYPE NAME SIZE IDENTIFIER 0: GUID_partition_scheme +17.6 GB disk18 1: Apple_APFS Container disk19 17.6 GB disk18s1 /dev/disk19 (synthesized): #: TYPE NAME SIZE IDENTIFIER 0: APFS Container Scheme - +17.6 GB disk19 Physical Store disk18s1 1: APFS Volume iOS 26.1 Simulator 17.1 GB disk19s1 /dev/disk20 (disk image): #: TYPE NAME SIZE IDENTIFIER 0: GUID_partition_scheme +9.1 GB disk20 1: Apple_APFS Container disk21 9.1 GB disk20s1 /dev/disk21 (synthesized): #: TYPE NAME SIZE IDENTIFIER 0: APFS Container Scheme - +9.1 GB disk21 Physical Store disk20s1 1: APFS Volume iOS 18.5 Simulator B... 8.8 GB disk21s1 /dev/disk22 (disk image): #: TYPE NAME SIZE IDENTIFIER 0: GUID_partition_scheme +20.7 GB disk22 1: Apple_APFS Container disk23 20.7 GB disk22s1 /dev/disk23 (synthesized): #: TYPE NAME SIZE IDENTIFIER 0: APFS Container Scheme - +20.7 GB disk23 Physical Store disk22s1 1: APFS Volume iOS 18.5 Simulator 20.2 GB disk23s1 I am unable to unmount them, either from the command line or Disk Utility. How do I go about this?

I was developing on Xcode and downloading and testing just fine. Today when I connect (via cable), clean, build and run the system When I look in the iPhone ->settings -> General ->VPN & Device Management it does not list my developers tag. How do I get the two talking again. I have restarted the MAC (Xcode) and the iPhone multiple times.

This is the full logging: libsystem_kernel.dylib`__pthread_kill: 0x2502f71c8 <+0>: mov x16, #0x148 ; =328 0x2502f71cc <+4>: svc #0x80 -> 0x2502f71d0 <+8>: b.lo 0x2502f71f0 ; <+40> 0x2502f71d4 <+12>: pacibsp 0x2502f71d8 <+16>: stp x29, x30, [sp, #-0x10]! 0x2502f71dc <+20>: mov x29, sp 0x2502f71e0 <+24>: bl 0x2502f2900 ; cerror_nocancel 0x2502f71e4 <+28>: mov sp, x29 0x2502f71e8 <+32>: ldp x29, x30, [sp], #0x10 0x2502f71ec <+36>: retab 0x2502f71f0 <+40>: ret

... and I managed to fix most issues coming out, but for a specific issue in an class adopting a protocol; basically it is a support class to be used by the view controller and so I wanted to keep it in background, so I created a new actor and I wanted to use it for this protocol and adopting classes. Yet I came out with a host of errors I have no idea about how to cope with: :

This is a grave issue I am facing while testing my apps on my personal device. This is the error I seem to be getting: "The application could not be launched because the Developer App Certificate is not trusted." And on the phone side, this is the message: Unable to Verify App. An internet connection is required to verify the trust of the developer "Apple Development... Before I receive any recommendations, such as deleting Xcode or restarting my device, I would like to clarify that I have already taken all necessary precautions. The application I was testing appeared to function correctly in the morning a few hours prior to the update. However, after upgrading to the latest beta builds, iOS 26.4 beta and the latest macOS beta, this issue has become a recurring problem. I would greatly appreciate your assistance in resolving this matter, as it is of utmost importance to me.

I've seen a couple posts on reddit today but wanted to call out here because I think it may be a more widespread issue - I keep getting an error trying to open my iOS app saying "Unable to verify app - An internet connection is required to verify trust of the developer...". I have never gotten this issue before and did not change anything in my build settings from my last successful build of the app to now. The directions it gives me are to go to Settings > General > VPN and Device Management and trust my developer certificate from there, but that doesn't work either. The first time I tried this, the developer certificate wasn't there at all, then I looked at Reddit and saw people recommending to download the developer certificate to solve the issue, but doing this did not fix the error either. Just looking to see if anyone else has encountered this or what the fix might be.

I changed something with Bundle Identifier... since then I cannot trust the certificate anymore on iPhone. It just won't show up. I reinstalled new profile, new bundle id, completely reinstalled iPhone... created new certificates, downloaded... nothing... I thinks it needs internet connection, but connection works just fine Unable to Verify App An internet connection is required to verify trust of the developer "Apple Development: My Name (22YBQVQJZK). This app will not be available until verified. this makes me crazy.. I lost like 5 hours on this.. still it does not work... Apple Intelligence tried like everything .. didn't help

I work on some proprietary codebases and can only use private AI services with them (currently MiniMax M2.1 and GLM 4.7). It all works great with both Claude Code and OpenCode agents, and I'd like to leverage the new agentic capabilities that are now in Xcode 26.3. I'm not seeing any option to connect to OpenCode, and both the Anthropic and OpenAI providers require an enterprise account (which I don't have access to). Are there any options that I'm missing here?

I have an iOS app that I want to run on my device via Xcode and the USB-C cable. Once I run it through Xcode with my device as the target the app builds on device. But then I get an error message stating I need to Verify App via the Settings section "VPN & Device Management" I click on my account under "Developer App" and I trust my developer account. Then I am asked to "Verify App" And when I do so I can a spinning icon that spins for a minute. Spinning Icon stops and I still cant use the app. I have tried a couple of different things in particular Here is the Xcode error output : Domain: IDELaunchCoreDevice Code: 0 Recovery Suggestion: Verify that the Developer App certificate for your account is trusted on your device. Open Settings on the device and navigate to General -> VPN & Device Management, then select your Developer App certificate to trust it. User Info: { DVTErrorCreationDateKey = "2026-03-10 21:02:06 +0000"; IDERunOperationFailingWorker = IDELaunchCoreDeviceWorker; } -- The application failed to launch. Domain: com.apple.dt.CoreDeviceError Code: 10002 User Info: { BundleIdentifier = "com.clawfighter2.ios"; } -- The request to open "com.clawfighter2.ios" failed. Domain: FBSOpenApplicationServiceErrorDomain Code: 1 Failure Reason: The request was denied by service delegate (SBMainWorkspace) for reason: Security ("Unable to launch com.clawfighter2.ios because it has an invalid code signature, inadequate entitlements or its profile has not been explicitly trusted by the user"). User Info: { BSErrorCodeDescription = RequestDenied; FBSOpenApplicationRequestID = 0xa301; } -- The operation couldn’t be completed. Unable to launch com.clawfighter2.ios because it has an invalid code signature, inadequate entitlements or its profile has not been explicitly trusted by the user. Domain: FBSOpenApplicationErrorDomain Code: 3 Failure Reason: Unable to launch com.clawfighter2.ios because it has an invalid code signature, inadequate entitlements or its profile has not been explicitly trusted by the user. User Info: { BSErrorCodeDescription = Security; } -- Event Metadata: com.apple.dt.IDERunOperationWorkerFinished : { "device_identifier" = "00008140-001A04E02193001C"; "device_isCoreDevice" = 1; "device_model" = "iPhone17,1"; "device_osBuild" = "26.3.1 (23D8133)"; "device_osBuild_monotonic" = 2303813300; "device_os_variant" = 1; "device_platform" = "com.apple.platform.iphoneos"; "device_platform_family" = 2; "device_reality" = 1; "device_thinningType" = "iPhone17,1"; "device_transport" = 1; "launchSession_schemeCommand" = Run; "launchSession_schemeCommand_enum" = 1; "launchSession_targetArch" = arm64; "launchSession_targetArch_enum" = 6; "operation_duration_ms" = 12563; "operation_errorCode" = 0; "operation_errorDomain" = IDELaunchCoreDevice; "operation_errorWorker" = IDELaunchCoreDeviceWorker; "operation_error_reportable" = 0; "operation_name" = IDERunOperationWorkerGroup; "param_consoleMode" = 1; "param_debugger_attachToExtensions" = 0; "param_debugger_attachToXPC" = 1; "param_debugger_type" = 3; "param_destination_isProxy" = 0; "param_destination_platform" = "com.apple.platform.iphoneos"; "param_diag_MTE_enable" = 0; "param_diag_MainThreadChecker_stopOnIssue" = 0; "param_diag_MallocStackLogging_enableDuringAttach" = 0; "param_diag_MallocStackLogging_enableForXPC" = 1; "param_diag_allowLocationSimulation" = 1; "param_diag_checker_mtc_enable" = 1; "param_diag_checker_tpc_enable" = 1; "param_diag_gpu_frameCapture_enable" = 0; "param_diag_gpu_shaderValidation_enable" = 0; "param_diag_gpu_validation_enable" = 0; "param_diag_guardMalloc_enable" = 0; "param_diag_memoryGraphOnResourceException" = 0; "param_diag_queueDebugging_enable" = 1; "param_diag_runtimeProfile_generate" = 0; "param_diag_sanitizer_asan_enable" = 0; "param_diag_sanitizer_tsan_enable" = 0; "param_diag_sanitizer_tsan_stopOnIssue" = 0; "param_diag_sanitizer_ubsan_enable" = 0; "param_diag_sanitizer_ubsan_stopOnIssue" = 0; "param_diag_showNonLocalizedStrings" = 0; "param_diag_viewDebugging_enabled" = 1; "param_diag_viewDebugging_insertDylibOnLaunch" = 1; "param_install_style" = 2; "param_launcher_UID" = 2; "param_launcher_allowDeviceSensorReplayData" = 0; "param_launcher_kind" = 0; "param_launcher_style" = 99; "param_launcher_substyle" = 0; "param_lldbVersion_component_idx_1" = 0; "param_lldbVersion_monotonic" = 170302360103; "param_runnable_appExtensionHostRunMode" = 0; "param_runnable_productType" = "com.apple.product-type.application"; "param_testing_launchedForTesting" = 0; "param_testing_suppressSimulatorApp" = 0; "param_testing_usingCLI" = 0; "sdk_canonicalName" = "iphoneos26.2"; "sdk_osVersion" = "26.2"; "sdk_platformID" = 2; "sdk_variant" = iphoneos; "sdk_version_monotonic" = 2302005700; } -- System Information macOS Version 26.3 (Build 25D125) Xcode 26.3 (24587) (Build 17C529) Timestamp: 2026-03-10T16:02:06-05:00

Dear Xcode Team, Please consider adding an option to position the Coding Assistant on the right side of the editor. Currently, when the assistant panel is open, it makes it difficult to access the Project Navigator at the same time. Having the ability to move the Coding Assistant to the right side would allow developers to keep the Project Navigator visible while interacting with the assistant, improving workflow and efficiency. Thank you

0 0x10109152c __assert_rtn + 252 1 0x101006054 void std::__1::__introsort<std::__1::_ClassicAlgPolicy, ld::AliasAddressOrderer&, ld::Atom const**, false>(ld::Atom const**, ld::Atom const**, ld::AliasAddressOrderer&, std::__1::iterator_traits<ld::Atom const**>::difference_type, bool) + 0 2 0x1010059a4 ld::LayoutLinkedImage::assignAtomOffsetsInSection(ld::SectionLayout&, unsigned int, bool) + 680 3 0x10100a724 void dispatchForEach<ld::SectionLayout*, ld::LayoutLinkedImage::sortAtomsWithinSections()::$_0>(std::__1::span<ld::SectionLayout*, 18446744073709551615ul>, unsigned long, ld::LayoutLinkedImage::sortAtomsWithinSections()::$_0)::'lambda'(unsigned long)::operator()(unsigned long) const + 7852 4 0x180818aec _dispatch_client_callout2 + 16 5 0x1808137f8 _dispatch_apply_invoke3 + 336 6 0x180818ad4 _dispatch_client_callout + 16 7 0x180801a60 _dispatch_once_callout + 32 8 0x180812938 _dispatch_apply_invoke + 252 9 0x180818ad4 _dispatch_client_callout + 16 10 0x1808359dc _dispatch_channel_invoke.cold.5 + 32 11 0x18081113c _dispatch_root_queue_drain + 736 12 0x180811784 _dispatch_worker_thread2 + 180 13 0x1809b7e10 _pthread_wqthread + 232 ld snapshot written at /tmp/AIChatDoctor-2026-03-10-150254.ld-snapshot ld: Assertion failed: (aliasSectionNum == sectionNum && "alias and its target must be located in the same section"), function assignAliasAtomOffsetInSection, file Layout.cpp, line 4805. clang: error: linker command failed with exit code 1 (use -v to see invocation)

When building our project for Mac Catalyst with Xcode 26.2, we get this warning almost a hundred times, once for every object file: directory not found for option '-L/var/run/com.apple.security.cryptexd/mnt/com.apple.MobileAsset.MetalToolchain-v17.3.48.0.UZtKea/Metal.xctoolchain/usr/lib/swift/maccatalyst' Somehow, every Link <FileName>.o build step got the following parameter, regardless if the target contained Metal files or not: -L/var/run/com.apple.security.cryptexd/mnt/com.apple.MobileAsset.MetalToolchain-v17.3.48.0.UZtKea/Metal.xctoolchain/usr/lib/swift/maccatalyst The toolchain is mounted at this point, but the directory usr/lib/swift/maccatalyst doesn't exist. When building the project for iOS, the option doesn't exist and the warning is not shown. We already check the build settings, but we couldn't find a reason why the linker is trying to link against the toolchain here. Even for targets that do contain Metal files, we get the following linker warning: search path '/var/run/com.apple.security.cryptexd/mnt/com.apple.MobileAsset.MetalToolchain-v17.3.48.0.UZtKea/Metal.xctoolchain/usr/lib/swift/maccatalyst' not found Is this a known issue? Is there a way to get rid of these warnings?

In Xcode 26.3 and 26.4, when I use Xcode's built-in git functionality to do a "pull" or "fetch", Xcode presents a dialog saying it's performing the operation, but it never completes. The dialog remains on screen with a spinner. My remote repos are stored on a Mac mini on my local network and I access them via SSH. The git command line works fine, as does the tool Git Tower. I've filed this as FB22091014. Has anyone else seen this, and if so, found a solution?

Even when making a completely fresh Unity project, if I include ARKit and upload it to testflight, when I open it on my ipad it says 'Couldn't Load App'. If I don't include testflight the app opens fine. If I build the app directly to my ipad the app works fine. It opens if I set ARKit to 'optional' but then the AR doesn't work. I have included a camera and location usage description so it's not that. Really not sure what's going on, any help would be massively appreciated!

Hello, I’m building an iOS video player using AVPlayer and a custom playback queue. I implemented remote controls using MPRemoteCommandCenter and enabled: nextTrackCommand previousTrackCommand playCommand pauseCommand I disabled: skipForwardCommand skipBackwardCommand seekForwardCommand seekBackwardCommand I also set queue metadata in MPNowPlayingInfoCenter: MPNowPlayingInfoPropertyPlaybackQueueIndex MPNowPlayingInfoPropertyPlaybackQueueCount Even with these commands enabled and the queue count greater than 1, the iOS lock screen continues to display the 10-second skip buttons instead of the previous/next track buttons. The commands themselves work correctly when triggered externally (Control Center, headphones, etc.), but the UI still shows the skip controls. Is there a way to force the lock screen UI to display previous / next track buttons for a video playlist? Or is this behavior expected when using AVPlayer with video content? Thanks.

Does Xcode 26 still support creating pull requests and/or viewing comments from GitHub pull requests associated with the current branch? This used to be possible, but I cannot get it to work with the current version of Xcode (26.0.1). The "Create Pull Request" menu item takes me to github.com directly, instead of presenting a nice UI menu; hence I'm wondering.

Hi. In my app a need do change launch screen. During development sometime in when I install new version of app over old version sometimes I see old launch screen. Is it possible that this situation will happen on production when I will publish app to App Store? Is Launch screen somehow cached?

Currently it's Sonnet 4.5. I know that 4.6 is out.