Explore the art and science of app design. Discuss user interface (UI) design principles, user experience (UX) best practices, and share design resources and inspiration.

Learn about designing great app and game experiences

Posts under General subtopic

Post

Replies

Boosts

Views

Activity

Contact UISearchBar missing.
Feedback id: FB16140301 Below are the steps to reproduce the bug in Contacts app. Open Contacts app. Now search for a contact and didSelect that contact. Now slightly hold swipe right(from view's center leading position) as to pop the view but not fully swipe, now release the finger and you can see the back nav bar button missing and tapping the back button position also doesn't perform dismiss action. Now do fully swipe from left to right to dismiss(pop) current view. Here you can see the search bar missing.-> That's the bug.
0
1
243
Jun ’25
Spam 4.3 (a)
Hello everyone, I’ve reached out to Apple’s review team multiple times, but unfortunately, I haven’t received any clear or specific guidance on why my app was rejected. My app has been rejected several times with the reason “Spam” under guideline 4.3, and I still don't understand exactly which part of the app is problematic. Even after providing the necessary information about the data, I resubmitted the app, and after a few days, it quickly moved into "In Review" status, but then was rejected within seconds with the same “Spam” message. I have sent over 13 messages asking for specific feedback, and all I get are vague responses saying “It’s spam, refer to 4.3, fix your app, and resubmit.” However, when I review the guidelines, I don’t see any specific reasons for rejection that apply to my app. I’m particularly confused because my app is a VPN, and when I check the guidelines, I see that apps in categories like dating and others are saturated, but VPN apps are not. My app uses completely dedicated servers, and the IP addresses are not found in any other apps. Still, my app keeps getting rejected. If anyone has encountered a similar issue or has any insight into what might be causing this, I would greatly appreciate it if you could provide detailed guidance on what specifically needs to be changed to get the app approved. Thank you!
Topic: Design SubTopic: General
4
1
1.4k
Feb ’26
iOS 26 Beta 7 double-tap to select text while in Dark Mode makes it very difficult to see what you're selecting. This has been an issue since Beta 1 and seems like intended behavior.
This has been an issue since installing the first beta and I haven't seen anyone else say anything about it so I feel like I'm going kind of bonkers. While using Dark Mode, double-tapping to select a word while using the Liquid Glass keyboard, like in Messages or Safari, produces a flashlight-like effect over the text with each tap. While this is a fine animation and pretty helpful when moving the cursor, the brightness of the flashlight effect on white text in Dark Mode makes it impossible to see what you're actually tapping to select. The brightness seems to intensify 100x when rapidly tapping. This is not an issue in Light Mode when the text itself is black. To recreate this, just turn your phone to Dark Mode, go into Messages and type a few words into a thread. Try to double-tap to select a word in the text box. The brightness of the selected word should intensify to the point of being unable to see the word itself. Has anyone been bothered by this? Is there a way to fix or adjust it? I've tried reducing transparency and a bunch of other settings but nothing has worked.
Topic: Design SubTopic: General
0
1
771
Aug ’25
CarPlay navigation issue, maximum depth
Hi everyone, I am working on a CarPlay integration, and need open a two level list opened from a root template. However, I am always receiving an error message when opening the 2nd pushed template. To narrow it down not to have an issue with some app specific code I created the CarPlay scene below. I am aware that there is a limit, but two levels I understand are supported on all CarPlay integrations, the maximum seems to be 5. The app is just crashing right after showing the 2nd template. Any ideas? Any hints are much appreciated. Thanks a lot! Regards, Michael class CarPlaySceneDelegate2: UIResponder, CPTemplateApplicationSceneDelegate { // [...] private func createRootTemplate() -> CPListTemplate { let pushToAItem = CPListItem(text: "Push to Template A", detailText: "Level 1 → Level 2") pushToAItem.handler = {[weak self] (pushToAItem, completion) in guard let self = self else { completion() return } self.interfaceController?.pushTemplate( self.pushTemplateA(), animated: true, completion: { (didPresent, error) in completion() } ) } let section = CPListSection(items: [pushToAItem]) let template = CPListTemplate(title: "Root Template", sections: [section]) return template } private func pushTemplateA() -> CPListTemplate { let pushToBItem = CPListItem(text: "Push to Template B", detailText: "Level 2 → Level 3") pushToBItem.handler = {[weak self] (pushToBItem, completion) in guard let self = self else { completion() return } self.interfaceController?.pushTemplate( self.pushTemplateB(), animated: true, completion: { (didPresent, error) in completion() } ) } let backToRootItem = CPListItem(text: "Pop to Root", detailText: "Go back to root") backToRootItem.handler = { [weak self] _, completion in self?.interfaceController?.popToRootTemplate(animated: true, completion: nil) completion(); } let infoItem = CPListItem(text: "Current Depth", detailText: "2 (Template A)") let stackCountItem = CPListItem( text: "Stack Count", detailText: "\((interfaceController?.templates.count ?? 0) + 1)" ) let section = CPListSection(items: [pushToBItem, backToRootItem, infoItem, stackCountItem]) let template = CPListTemplate(title: "Template A", sections: [section]) return template } private func pushTemplateB() -> CPListTemplate { let pushToCItem = CPListItem(text: "Push to Template C", detailText: "Level 3 → Level 4") pushToCItem.handler = {[weak self] (pushToCItem, completion) in guard let self = self else { completion() return } self.interfaceController?.pushTemplate( self.pushTemplateC(), animated: true, completion: { (didPresent, error) in completion() } ) } let backToRootItem = CPListItem(text: "Pop to Root", detailText: "Go back to root") backToRootItem.handler = { [weak self] _, completion in self?.interfaceController?.popToRootTemplate(animated: true, completion: nil) completion() } let popOneItem = CPListItem(text: "Pop One", detailText: "Go back to Template A") popOneItem.handler = { [weak self] _, completion in self?.interfaceController?.popTemplate(animated: true, completion: nil) completion() } let infoItem = CPListItem(text: "Current Depth", detailText: "3 (Template B)") let stackCountItem = CPListItem( text: "Stack Count", detailText: "\((interfaceController?.templates.count ?? 0) + 1)" ) let section = CPListSection(items: [pushToCItem, popOneItem, backToRootItem, infoItem, stackCountItem]) let template = CPListTemplate(title: "Template B", sections: [section]) return template } private func pushTemplateC() -> CPListTemplate { let backToRootItem = CPListItem(text: "Pop to Root", detailText: "Go back to root") backToRootItem.handler = { [weak self] _, completion in self?.interfaceController?.popToRootTemplate(animated: true, completion: nil) completion() } let popOneItem = CPListItem(text: "Pop One", detailText: "Go back to Template B") popOneItem.handler = { [weak self] _, completion in self?.interfaceController?.popTemplate(animated: true, completion: nil) completion() } let infoItem = CPListItem(text: "Current Depth", detailText: "4 (Template C)") let stackCountItem = CPListItem( text: "Stack Count", detailText: "\((interfaceController?.templates.count ?? 0) + 1)" ) let section = CPListSection(items: [popOneItem, backToRootItem, infoItem, stackCountItem]) let template = CPListTemplate(title: "Template C", sections: [section]) return template } }
2
0
1.9k
Jan ’26
Sell UI patent to Apple
I've designed a new UI for phones.. I'd like Apple to look at it and see what they think https://docs.google.com/presentation/d/10QSQvAdRRkL-eA9WRsSEbsL62XIayJ75Mbi93tx92DI/edit?usp=drive_link
Topic: Design SubTopic: General
3
0
818
Jan ’26
Confidential Innovation Proposal.Inquiry About Formal Communication Channel
I am writing to express interest in engaging with Apple regarding a highly original and commercially relevant concept related to future iPhone innovation. Given the confidential and proprietary nature of this idea, I am not in a position to share details through an open inquiry or standard feedback form. I would welcome the opportunity to present this concept through an official and formal communication channel that ensures appropriate confidentiality and professional evaluation, should Apple have an established process for external innovation or partnership discussions. Please advise if there is a suitable point of contact or procedure for initiating such a conversation in accordance with Apple’s policies. Thank you for your time and consideration. Please feel free to contact me though my email or phone Regards Tahmeed Hossain Contact: +880 1781882730
Topic: Design SubTopic: General
1
0
896
Jan ’26
@State variable returns empty despite being set in .onAppear function
With the code below, JSON data is parsed and is stored in the variable data in the .onAppear function, however an empty set of data is passed to the Content view. How can that be fixed so that the JSON data passes to the DataView? struct ContentView: View { @State var data: [Data] @State var index: Int = 0 var body: some View { VStack { DataView(data: data[index]) } .onAppear { let filePath = Bundle.main.path(forResource: "data", ofType: "json") let url = URL(fileURLWithPath: filePath!) data = getData(url: url) } } func getData(url: URL) -> [Data] { do { let data = try Data(contentsOf: url) let jsonDecoded = try JSONDecoder().decode([Data].self, from: data) return jsonDecoded } catch let error as NSError { print("Fail: \(error.localizedDescription)") } catch { print("Fail: \(error)") } return [] } }
17
1
607
Aug ’25
Question about the platform parameter in device registration
https://developer.apple.com/documentation/appstoreconnectapi/devicecreaterequest/data-data.dictionary/attributes-data.dictionary According to the API documentation above, the parameter values for platform can be three: IOS, MAC-OS, and UNIVERSAL. After debugging, it was found that IOS and MAC-OS can be used normally, but UNIVERSAL encountered an error UNIVERSAL' is not a valid value for the attribute 'platform'. Expected one of: 'IOS', 'MAC_OS', I would like to know if this value has been deprecated or if the API interface requires new version support, and how to use this value! Please help me solve it! thank you!
Topic: Design SubTopic: General
0
1
340
Aug ’25
Suggestion: Add App Notification Filter Slider to Notification Center
Add slim horizontal bar at the top of the Notification Center that displays the apps with current notifications, along with a badge showing the number of notifications for each app. Each app icon is clickable, allowing users to filter the Notification Center and view only the notifications from the selected app. The first button in the slider should be “All” to show all notifications, followed by app icons (Excluding notifications summary) This bar Appears only when notifications are from more than one app. Hidden if there’s only one app in Notification Center (no need to filter). Benefits: Better organization: Helps users quickly identify which apps have unread notifications. Reduced distraction: Allows focusing on notifications from one app at a time. Easier navigation: Especially helpful when notifications from multiple apps are mixed together by time. Faster interaction: Saves time by letting users jump directly to the relevant group of grouped or multiple notifications.
Topic: Design SubTopic: General
0
1
84
Jun ’25
Ios26 beta 3 concerns about liquid glass design
With the new ios 26 beta 3 helps some stabillty and performance issues but most of the liquid glass has been removed or made very frosty look; and it defeats the whole purpose of a big redesign, and even thought the changes are because of readability and contrast complaints it should not take away liquid glass design. I think apple should consider adding a toggle or choice to choose if they would want a more frosted look or a more liquid glass look the the original plan.
Topic: Design SubTopic: General Tags:
1
1
277
Jul ’25
Support for corner-shape?
Considering how important smooth/continuous corners are for Apple throughout their various native platforms (and hardware), can we expect Safari to soon adopt this CSS feature? It's already live in Chrome https://developer.mozilla.org/en-US/docs/Web/CSS/Reference/Properties/corner-shape For those who are unfamiliar with smooth corners and how Apple uses them: https://www.youtube.com/watch?v=YElVQqNwrJ4&t=110s
Topic: Design SubTopic: General Tags:
0
1
1.1k
3w
White border appears during app transition despite full-opacity 1024x1024 icon (SVG and PNG tested)
Hi everyone 👋 I’m a new iOS developer working on my first app and I’ve run into a frustrating visual bug involving my app icon during the launch/close transition. Issue: When I use Icon Composer (the new tool introduced for iOS 26) to generate my app icon, I consistently see a thin white border or “fringe” around the icon only during the transition animation (when the app opens or closes). It disappears once the animation ends. What I tested and confirmed: • I exported the exact same design directly from Adobe Illustrator as a 1024×1024 PNG, fully opaque, RGB color mode, background color filling the entire canvas (no transparency, no borders, no rounded corners). • When I place that exported PNG directly into the AppIcon asset catalog in Xcode, the icon renders perfectly — no white fringe appears, just a slightly darker shade of blue during transitions (expected and acceptable). • But when I generate the icon using Icon Composer, the white edge always appears, even if I disable effects, use full coverage layers, or only keep a flat color layer. Notes: • Tested on iOS 26 (latest beta) using Xcode 16. • The issue seems specific to Icon Composer’s export format or metadata — maybe it’s not stripping alpha correctly or something related to the squircle mask? • I followed all recommended specs: 1024×1024 px, PNG, sRGB, no transparency, exported from Illustrator at 72ppi with solid background. Even tested without the logo, just the icon made with icon composer Is anyone else experiencing this issue with Icon Composer exports? Is there an official recommendation to avoid this during transitions or should I simply avoid Icon Composer for production icons for now and stick with Illustrator / Figma exports? Thanks so much Here’s a visual example:
1
1
1.6k
Mar ’26
How to do settings icon for menu in SwiftUI?
Hi everyone. Can you help me with my settings icon design. I`m trying to create circular setting button using Menu. My code here: struct MenuView: View { var body: some View { Menu { Text("Hello") Text("How are you") } label: { Image(systemName: "gearshape.fill") .clipShape(Circle()) } .clipShape(Circle()) .padding(.top, 10) .padding(.leading, 20) } } You can see my try, this one looks wrong. It should be like this: Just Circle with setting image inside. Thank you an advance 😭🙏🛐
1
0
587
Feb ’26
Should we design for Liquid Glass on visionOS?
Liquid Glass was introduced as a universal design language for all platforms, but isn't supported by visionOS 26 beta. For a small team creating a visionOS app targeted for release in fall 2026, should we focus our design work on Liquid Glass, or for the existing visionOS design language?
Topic: Design SubTopic: General Tags:
1
1
279
Jun ’25
Struggling creating a custom SF Symbol: The provided variants are not interpolatable
Hi, I am trying to create a custom SF Symbol from an SVG file created with Affinity Designer but, even though my SVG file look perfect in Firefox for example compared to the exported custom.circle.svg file (as recommended in Apple's documentation), I fail to get rid of this error: "The provided variants are not interpolatable" My creation process using Affinity Designer is: Export as SVG file Duplicate the custom.circle.svg file exported from the SF Symbols app In the new file, replace the 3 "path" tags in the "g" sections "id="Black-S", "Regular-S", "Ultralight-S" with the paths from the SVG file exported from Affinity designer Set the 3 transform matrices to "matrix(1 0 0 1 0 0)" for the 3 variants to be generated at the correct location. Verify in an SVG viewer that the file looks correct. Import the file via Drag&Drop into the SF Symbols app. What is wrong with my file? Thank you in advance for any help, Marc mySymbol.svg.txt
Topic: Design SubTopic: General Tags:
3
0
210
Jun ’25
Apple Intelligence and Siri
I downloaded iOS 26 beta 3. I was very happy with how it turned out, but when I activated Siri, I noticed the rainbow pulsing glow that bordered the phone was missing, and all that was left was the original Siri bubble. I was very disappointed, does anyone know how to get this back? I loved that design feature.
1
0
354
Jul ’25
Contact UISearchBar missing.
Feedback id: FB16140301 Below are the steps to reproduce the bug in Contacts app. Open Contacts app. Now search for a contact and didSelect that contact. Now slightly hold swipe right(from view's center leading position) as to pop the view but not fully swipe, now release the finger and you can see the back nav bar button missing and tapping the back button position also doesn't perform dismiss action. Now do fully swipe from left to right to dismiss(pop) current view. Here you can see the search bar missing.-> That's the bug.
Replies
0
Boosts
1
Views
243
Activity
Jun ’25
Spam 4.3 (a)
Hello everyone, I’ve reached out to Apple’s review team multiple times, but unfortunately, I haven’t received any clear or specific guidance on why my app was rejected. My app has been rejected several times with the reason “Spam” under guideline 4.3, and I still don't understand exactly which part of the app is problematic. Even after providing the necessary information about the data, I resubmitted the app, and after a few days, it quickly moved into "In Review" status, but then was rejected within seconds with the same “Spam” message. I have sent over 13 messages asking for specific feedback, and all I get are vague responses saying “It’s spam, refer to 4.3, fix your app, and resubmit.” However, when I review the guidelines, I don’t see any specific reasons for rejection that apply to my app. I’m particularly confused because my app is a VPN, and when I check the guidelines, I see that apps in categories like dating and others are saturated, but VPN apps are not. My app uses completely dedicated servers, and the IP addresses are not found in any other apps. Still, my app keeps getting rejected. If anyone has encountered a similar issue or has any insight into what might be causing this, I would greatly appreciate it if you could provide detailed guidance on what specifically needs to be changed to get the app approved. Thank you!
Topic: Design SubTopic: General
Replies
4
Boosts
1
Views
1.4k
Activity
Feb ’26
iOS 26 Beta 7 double-tap to select text while in Dark Mode makes it very difficult to see what you're selecting. This has been an issue since Beta 1 and seems like intended behavior.
This has been an issue since installing the first beta and I haven't seen anyone else say anything about it so I feel like I'm going kind of bonkers. While using Dark Mode, double-tapping to select a word while using the Liquid Glass keyboard, like in Messages or Safari, produces a flashlight-like effect over the text with each tap. While this is a fine animation and pretty helpful when moving the cursor, the brightness of the flashlight effect on white text in Dark Mode makes it impossible to see what you're actually tapping to select. The brightness seems to intensify 100x when rapidly tapping. This is not an issue in Light Mode when the text itself is black. To recreate this, just turn your phone to Dark Mode, go into Messages and type a few words into a thread. Try to double-tap to select a word in the text box. The brightness of the selected word should intensify to the point of being unable to see the word itself. Has anyone been bothered by this? Is there a way to fix or adjust it? I've tried reducing transparency and a bunch of other settings but nothing has worked.
Topic: Design SubTopic: General
Replies
0
Boosts
1
Views
771
Activity
Aug ’25
Icon composer exporting with border
Hi Guys, I noticed that with Icon Composer when you export the icon it does not export a square image, is there any way of doing it or that's how it is now? Checking the icon on the iPhone something doesn't seem right...
Replies
1
Boosts
1
Views
473
Activity
Sep ’25
CarPlay navigation issue, maximum depth
Hi everyone, I am working on a CarPlay integration, and need open a two level list opened from a root template. However, I am always receiving an error message when opening the 2nd pushed template. To narrow it down not to have an issue with some app specific code I created the CarPlay scene below. I am aware that there is a limit, but two levels I understand are supported on all CarPlay integrations, the maximum seems to be 5. The app is just crashing right after showing the 2nd template. Any ideas? Any hints are much appreciated. Thanks a lot! Regards, Michael class CarPlaySceneDelegate2: UIResponder, CPTemplateApplicationSceneDelegate { // [...] private func createRootTemplate() -> CPListTemplate { let pushToAItem = CPListItem(text: "Push to Template A", detailText: "Level 1 → Level 2") pushToAItem.handler = {[weak self] (pushToAItem, completion) in guard let self = self else { completion() return } self.interfaceController?.pushTemplate( self.pushTemplateA(), animated: true, completion: { (didPresent, error) in completion() } ) } let section = CPListSection(items: [pushToAItem]) let template = CPListTemplate(title: "Root Template", sections: [section]) return template } private func pushTemplateA() -> CPListTemplate { let pushToBItem = CPListItem(text: "Push to Template B", detailText: "Level 2 → Level 3") pushToBItem.handler = {[weak self] (pushToBItem, completion) in guard let self = self else { completion() return } self.interfaceController?.pushTemplate( self.pushTemplateB(), animated: true, completion: { (didPresent, error) in completion() } ) } let backToRootItem = CPListItem(text: "Pop to Root", detailText: "Go back to root") backToRootItem.handler = { [weak self] _, completion in self?.interfaceController?.popToRootTemplate(animated: true, completion: nil) completion(); } let infoItem = CPListItem(text: "Current Depth", detailText: "2 (Template A)") let stackCountItem = CPListItem( text: "Stack Count", detailText: "\((interfaceController?.templates.count ?? 0) + 1)" ) let section = CPListSection(items: [pushToBItem, backToRootItem, infoItem, stackCountItem]) let template = CPListTemplate(title: "Template A", sections: [section]) return template } private func pushTemplateB() -> CPListTemplate { let pushToCItem = CPListItem(text: "Push to Template C", detailText: "Level 3 → Level 4") pushToCItem.handler = {[weak self] (pushToCItem, completion) in guard let self = self else { completion() return } self.interfaceController?.pushTemplate( self.pushTemplateC(), animated: true, completion: { (didPresent, error) in completion() } ) } let backToRootItem = CPListItem(text: "Pop to Root", detailText: "Go back to root") backToRootItem.handler = { [weak self] _, completion in self?.interfaceController?.popToRootTemplate(animated: true, completion: nil) completion() } let popOneItem = CPListItem(text: "Pop One", detailText: "Go back to Template A") popOneItem.handler = { [weak self] _, completion in self?.interfaceController?.popTemplate(animated: true, completion: nil) completion() } let infoItem = CPListItem(text: "Current Depth", detailText: "3 (Template B)") let stackCountItem = CPListItem( text: "Stack Count", detailText: "\((interfaceController?.templates.count ?? 0) + 1)" ) let section = CPListSection(items: [pushToCItem, popOneItem, backToRootItem, infoItem, stackCountItem]) let template = CPListTemplate(title: "Template B", sections: [section]) return template } private func pushTemplateC() -> CPListTemplate { let backToRootItem = CPListItem(text: "Pop to Root", detailText: "Go back to root") backToRootItem.handler = { [weak self] _, completion in self?.interfaceController?.popToRootTemplate(animated: true, completion: nil) completion() } let popOneItem = CPListItem(text: "Pop One", detailText: "Go back to Template B") popOneItem.handler = { [weak self] _, completion in self?.interfaceController?.popTemplate(animated: true, completion: nil) completion() } let infoItem = CPListItem(text: "Current Depth", detailText: "4 (Template C)") let stackCountItem = CPListItem( text: "Stack Count", detailText: "\((interfaceController?.templates.count ?? 0) + 1)" ) let section = CPListSection(items: [popOneItem, backToRootItem, infoItem, stackCountItem]) let template = CPListTemplate(title: "Template C", sections: [section]) return template } }
Replies
2
Boosts
0
Views
1.9k
Activity
Jan ’26
Sell UI patent to Apple
I've designed a new UI for phones.. I'd like Apple to look at it and see what they think https://docs.google.com/presentation/d/10QSQvAdRRkL-eA9WRsSEbsL62XIayJ75Mbi93tx92DI/edit?usp=drive_link
Topic: Design SubTopic: General
Replies
3
Boosts
0
Views
818
Activity
Jan ’26
Confidential Innovation Proposal.Inquiry About Formal Communication Channel
I am writing to express interest in engaging with Apple regarding a highly original and commercially relevant concept related to future iPhone innovation. Given the confidential and proprietary nature of this idea, I am not in a position to share details through an open inquiry or standard feedback form. I would welcome the opportunity to present this concept through an official and formal communication channel that ensures appropriate confidentiality and professional evaluation, should Apple have an established process for external innovation or partnership discussions. Please advise if there is a suitable point of contact or procedure for initiating such a conversation in accordance with Apple’s policies. Thank you for your time and consideration. Please feel free to contact me though my email or phone Regards Tahmeed Hossain Contact: +880 1781882730
Topic: Design SubTopic: General
Replies
1
Boosts
0
Views
896
Activity
Jan ’26
@State variable returns empty despite being set in .onAppear function
With the code below, JSON data is parsed and is stored in the variable data in the .onAppear function, however an empty set of data is passed to the Content view. How can that be fixed so that the JSON data passes to the DataView? struct ContentView: View { @State var data: [Data] @State var index: Int = 0 var body: some View { VStack { DataView(data: data[index]) } .onAppear { let filePath = Bundle.main.path(forResource: "data", ofType: "json") let url = URL(fileURLWithPath: filePath!) data = getData(url: url) } } func getData(url: URL) -> [Data] { do { let data = try Data(contentsOf: url) let jsonDecoded = try JSONDecoder().decode([Data].self, from: data) return jsonDecoded } catch let error as NSError { print("Fail: \(error.localizedDescription)") } catch { print("Fail: \(error)") } return [] } }
Replies
17
Boosts
1
Views
607
Activity
Aug ’25
Question about the platform parameter in device registration
https://developer.apple.com/documentation/appstoreconnectapi/devicecreaterequest/data-data.dictionary/attributes-data.dictionary According to the API documentation above, the parameter values for platform can be three: IOS, MAC-OS, and UNIVERSAL. After debugging, it was found that IOS and MAC-OS can be used normally, but UNIVERSAL encountered an error UNIVERSAL' is not a valid value for the attribute 'platform'. Expected one of: 'IOS', 'MAC_OS', I would like to know if this value has been deprecated or if the API interface requires new version support, and how to use this value! Please help me solve it! thank you!
Topic: Design SubTopic: General
Replies
0
Boosts
1
Views
340
Activity
Aug ’25
Suggestion: Add App Notification Filter Slider to Notification Center
Add slim horizontal bar at the top of the Notification Center that displays the apps with current notifications, along with a badge showing the number of notifications for each app. Each app icon is clickable, allowing users to filter the Notification Center and view only the notifications from the selected app. The first button in the slider should be “All” to show all notifications, followed by app icons (Excluding notifications summary) This bar Appears only when notifications are from more than one app. Hidden if there’s only one app in Notification Center (no need to filter). Benefits: Better organization: Helps users quickly identify which apps have unread notifications. Reduced distraction: Allows focusing on notifications from one app at a time. Easier navigation: Especially helpful when notifications from multiple apps are mixed together by time. Faster interaction: Saves time by letting users jump directly to the relevant group of grouped or multiple notifications.
Topic: Design SubTopic: General
Replies
0
Boosts
1
Views
84
Activity
Jun ’25
Ios26 beta 3 concerns about liquid glass design
With the new ios 26 beta 3 helps some stabillty and performance issues but most of the liquid glass has been removed or made very frosty look; and it defeats the whole purpose of a big redesign, and even thought the changes are because of readability and contrast complaints it should not take away liquid glass design. I think apple should consider adding a toggle or choice to choose if they would want a more frosted look or a more liquid glass look the the original plan.
Topic: Design SubTopic: General Tags:
Replies
1
Boosts
1
Views
277
Activity
Jul ’25
Support for corner-shape?
Considering how important smooth/continuous corners are for Apple throughout their various native platforms (and hardware), can we expect Safari to soon adopt this CSS feature? It's already live in Chrome https://developer.mozilla.org/en-US/docs/Web/CSS/Reference/Properties/corner-shape For those who are unfamiliar with smooth corners and how Apple uses them: https://www.youtube.com/watch?v=YElVQqNwrJ4&t=110s
Topic: Design SubTopic: General Tags:
Replies
0
Boosts
1
Views
1.1k
Activity
3w
White border appears during app transition despite full-opacity 1024x1024 icon (SVG and PNG tested)
Hi everyone 👋 I’m a new iOS developer working on my first app and I’ve run into a frustrating visual bug involving my app icon during the launch/close transition. Issue: When I use Icon Composer (the new tool introduced for iOS 26) to generate my app icon, I consistently see a thin white border or “fringe” around the icon only during the transition animation (when the app opens or closes). It disappears once the animation ends. What I tested and confirmed: • I exported the exact same design directly from Adobe Illustrator as a 1024×1024 PNG, fully opaque, RGB color mode, background color filling the entire canvas (no transparency, no borders, no rounded corners). • When I place that exported PNG directly into the AppIcon asset catalog in Xcode, the icon renders perfectly — no white fringe appears, just a slightly darker shade of blue during transitions (expected and acceptable). • But when I generate the icon using Icon Composer, the white edge always appears, even if I disable effects, use full coverage layers, or only keep a flat color layer. Notes: • Tested on iOS 26 (latest beta) using Xcode 16. • The issue seems specific to Icon Composer’s export format or metadata — maybe it’s not stripping alpha correctly or something related to the squircle mask? • I followed all recommended specs: 1024×1024 px, PNG, sRGB, no transparency, exported from Illustrator at 72ppi with solid background. Even tested without the logo, just the icon made with icon composer Is anyone else experiencing this issue with Icon Composer exports? Is there an official recommendation to avoid this during transitions or should I simply avoid Icon Composer for production icons for now and stick with Illustrator / Figma exports? Thanks so much Here’s a visual example:
Replies
1
Boosts
1
Views
1.6k
Activity
Mar ’26
How to do settings icon for menu in SwiftUI?
Hi everyone. Can you help me with my settings icon design. I`m trying to create circular setting button using Menu. My code here: struct MenuView: View { var body: some View { Menu { Text("Hello") Text("How are you") } label: { Image(systemName: "gearshape.fill") .clipShape(Circle()) } .clipShape(Circle()) .padding(.top, 10) .padding(.leading, 20) } } You can see my try, this one looks wrong. It should be like this: Just Circle with setting image inside. Thank you an advance 😭🙏🛐
Replies
1
Boosts
0
Views
587
Activity
Feb ’26
Should we design for Liquid Glass on visionOS?
Liquid Glass was introduced as a universal design language for all platforms, but isn't supported by visionOS 26 beta. For a small team creating a visionOS app targeted for release in fall 2026, should we focus our design work on Liquid Glass, or for the existing visionOS design language?
Topic: Design SubTopic: General Tags:
Replies
1
Boosts
1
Views
279
Activity
Jun ’25
Struggling creating a custom SF Symbol: The provided variants are not interpolatable
Hi, I am trying to create a custom SF Symbol from an SVG file created with Affinity Designer but, even though my SVG file look perfect in Firefox for example compared to the exported custom.circle.svg file (as recommended in Apple's documentation), I fail to get rid of this error: "The provided variants are not interpolatable" My creation process using Affinity Designer is: Export as SVG file Duplicate the custom.circle.svg file exported from the SF Symbols app In the new file, replace the 3 "path" tags in the "g" sections "id="Black-S", "Regular-S", "Ultralight-S" with the paths from the SVG file exported from Affinity designer Set the 3 transform matrices to "matrix(1 0 0 1 0 0)" for the 3 variants to be generated at the correct location. Verify in an SVG viewer that the file looks correct. Import the file via Drag&Drop into the SF Symbols app. What is wrong with my file? Thank you in advance for any help, Marc mySymbol.svg.txt
Topic: Design SubTopic: General Tags:
Replies
3
Boosts
0
Views
210
Activity
Jun ’25
UIDesignRequiresCompatibility not available for watchOS
Looking at the UIDesignRequiresCompatibility documentation, watchOS is not listed among the supported platforms. When added to the project, it is also being ignored, resulting in Liquid Glass design. It is possible to opt-out from Liquid Glass design temporarily. Is that just an oversight for Apple Watch please?
Replies
2
Boosts
0
Views
1k
Activity
Oct ’25
Apple Intelligence and Siri
I downloaded iOS 26 beta 3. I was very happy with how it turned out, but when I activated Siri, I noticed the rainbow pulsing glow that bordered the phone was missing, and all that was left was the original Siri bubble. I was very disappointed, does anyone know how to get this back? I loved that design feature.
Replies
1
Boosts
0
Views
354
Activity
Jul ’25
Can I use apple.logo placed on the top of apple sign in related view?
I placed apple.logo symbol image on the top of a view. This view is used to link or unlink Apple ID for user. In the middle is the apple sign in button. I want to use something to describe or represent what the view is, instead of using text description. so I think sign in's company logo is a good choice. Is it allowed by apple official?
Replies
1
Boosts
0
Views
1.1k
Activity
Nov ’25
The new appearance system
Not sure if anyone else has this issue, however with the new appearances when i use the dark appearance and then open the app "TickTick", the icon goes to its original colour until the app is closed.
Replies
0
Boosts
0
Views
974
Activity
Dec ’25