Some users of my app complain that it stops responding to touch after a while. The screen is still updating, and the app seems to be working normally otherwise. It just doesn't respond to any touches anymore. It is not a problem with the touchscreen itself, because the user is able to swipe up to get to the home screen, and then interact with other apps as normal. When re-opening my app, it is still unresponsive to touch. The only way to solve it, is to restart the app. Does anybody have a similar experience, and knows what could cause it? The app is based on UIKit, and still written in Objective-C, if it matters. The iOS version involved does not seem to matter, it happened with a couple of them.

While on ios26 beta2 i changed my battery for an aftermarket one. Phone cannot be charged anymore, battery status 1%. So it reboots. had to replace oem battery to make local backup, to revert to ios18. and have aftermarket battery to work again.

O v er the past few months, I’ve been experiencing persistent, abnormal behavior on my iPhone. Here's a short timeline: March 2025: Most apps log me out every time I close them. April 2025: Stored passwords suddenly begin failing across apps and websites. May–June 2025: Password recovery emails from Gmail accounts no longer arrive — suggesting that Gmail itself may be compromised or blocked/intercepted. Given the escalation, I ran several diagnostics and extracted system-level logs. Below is a structured summary of findings that point toward potential remote access, network traffic rerouting, and possibly hidden use of Bluetooth or debugging interfaces. ##1 Source: remotectl_dumpstate.txt More than 50 remote lockdown and diagnostic services are listed as active. Notable entries: com.apple.mobile.lockdown.remote.trusted and .untrusted com.apple.mobile.file_relay.shim.remote com.apple.webinspector.shim.remote com.apple.pcapd.shim.remote com.apple.bluetooth.BTPacketLogger.shim.remote com.apple.mobile.insecure_notification_proxy.remote This volume of .shim.remote and diagnostic services appears highly irregular for a non-debug, non-jailbroken device. 2. Skywalk Network Flows and Unusual Routing Source: skywalk.txt Dozens of flowswitch entries across interfaces like: ipsec0-7, pdp_ip0-2, en0-2, awdl0 Apps such as Gmail, ChatGPT, Preferences, and com.apple.WebKit are marked as defunct, yet persist in flow tables. Two specific daemons — replicatord and siriactionsd — appear on nearly every interface, in both QUIC and TCP6 traffic. skywalkctl flow-route shows multiple external IP paths, with flows routed through ipsec7, owned by kernel_task.0 — which could indicate system-level tunneling. 3. System Anomalies and Resource Behavior Inaccessible System Network Tools Source: get-network-info.txt All scutil calls fail (/usr/sbin/scutil does not exist). This blocks access to: DNS configuration (scutil --dns) Proxy and VPN status (scutil --proxy, --nc list) Reachability checks (scutil -r www.apple.com) Key Questions for the Developer Community Are >50 remote .shim.remote services typical on iOS 18.5 (release build)? Or does this suggest tampering, an MDM configuration, or debug provisioning? Could a misconfigured VPN or MDM profile enable persistent flow-switching across multiple interfaces (e.g., ipsec, pdp, awdl) and reroute app traffic such as Gmail? Is it possible for a test or developer certificate to silently side-load a background daemon, or trigger services like pcapd or file_relay, without showing in Profiles or Settings? Has anyone else seen the scutil binary missing or inaccessible on a stock iPhone? Could this be a sign of intentional lockdown or system modification? If anyone on iOS 18.5 / iPhone17,1 can share their remotectl_dumpstate output, I'd like to compare the service count and see if this behavior is reproducible. I’d appreciate any insight from those familiar with Apple’s system daemons, skywalk internals, or network service behavior. Happy to share sanitized logs or run additional diagnostics if needed. Thanks in advance. get-network-info.txt route-info.txt remotectl_dumpstate.txt [ assetsd.diskwrites_resource-2025-06-25-221428.json linkText

Okay… help me out, I’m behind on the times. Upgraded to the 26 beta from … honestly I think I was still using 16-something? And I’m wondering where the photo markup feature went? To be clear, I’m referring to the ability to write on a photo or screenshot from the Photos app by clicking “Edit”, then “Markup”. Is it gone or am I overlooking it? And do forgive me if this feature has been gone for a while already—as I mentioned, it’s been a while since I bothered with an iOS update. (So far, I definitely liked the version I was on previously much more!)

The Uber Driver app is able to get background location and there’s no way to turn it off from settings. Unlike other apps where there’s always an option to turn off background location from settings. Is this a bug or special treatment for big companies? this matters to me because we’re in a similar business but our app has to request background permissions, explicitly. I am attaching both of the screenshots here for you to compare and see. Please note that I verified personally that Uber Driver app is able to get background location.

I am trying to connect to a google worksheet with a service account and have added the GoogleAPIClientForRest (Drive and Sheets) and GTMSessionFetcher (Core) dependencies to my project. However, this code import GoogleAPIClientForRESTCore import GTMSessionFetcherCore func test() { let x = GTLRServiceAccountCredentials.self let y = GTLRAuthorizer.self print("Classes Found") } I get the the following errors: Cannot find "GTLRServiceCredentials' in scope and Cannot find 'GTLRAuthorizer' in scope. The dependencies are listed in the Link Binary with Libraries section. I have am using the latest versions of OS and Xocod and have reinstalled both to try and resolve this issue with no luck.

I’m running macOS 26 Beta 1 (build 25A5279m) on a 2019 Mac Pro (MacPro7,1) with a single 4K display connected via HDMI. Whenever I attempt to launch Finder, WindowServer immediately aborts and the machine reboots. Crash details: Process: WindowServer (PID 1441) Exception: EXC_CRASH (SIGABRT) triggered in thread 0 (ws_main_thread) Termination Reason: Abort trap: 6 Backtrace highlights: CA::OGL::MetalContext::draw(MTLPrimitiveType, …) hits an internal __assert_rtn in libsystem_c.dylib Subsequent calls all stem from QuartzCore’s OpenGL/Metal bridge (CA::OGL::render_layers, LayerNode::apply, etc.) Related threads: Thread 2 (com.apple.coreanimation.render-server) idle in mach_msg_overwrite Thread 1 shows AmbientDisplay and ColorSync callbacks running Hardware/Software: MacPro7,1 (2019) macOS 26.0 Beta 1 (25A5279m) 4K monitor via HDMI System Integrity Protection enabled What I’ve tried so far: Safe-boot (crash still occurs) Switching display profiles in System Settings → Displays → Color (no effect) Happy to provide any additional logs or verbose console output. Let me know if there’s any other data that would help diagnose the Metal/OpenGL integration issue in this beta.

If anyone runs into this issue, using the connect application works to move the status of the review.

触控按钮里面的截屏功能无法使用。按键组合截屏可以是正常使用。

Hi all, Im trying tu publish an app for iOS and I get it rejected by the lack of this privacy manifest, but unless I understood this wrong, this manifest is needed for external tools used, or maybe Im wrong, Im publishing an app made in Unity, so in this case, one has to include a privacy manifest by default? Sorry Im lost in all these terms, so I don't know if im asking something redundant, if you know how to fix this issue please tell me or direct me to the process because I haven't been able to identify the issue. Thanks a lot for any clue beforehand really

Hi all, Im trying to upload an app to the App Store, the app is made in Unity, well I built the app there and then open the Xcode project, from there set some fields and now when I have to go to Product>> Archive I get an error always, could you please tell me what is this and how to fix? unsupported option -mno- thumb for target arm64-apple-ios 15.6 Im using Xcode 16.4 which I think is the latest version released. Thanks for any clue about this, Im really lost

So here is my issue regarding iOS 26 Beta 3. I was playing a game called BangBang Survivor, while inside the game there is an option to make the game ad free with a monthly subscription. Somehow i found that it doesnt work anymore on Beta 3. When I clicked renew subcription, it shows “This Purchase has already been bought. It will restored for free” and I found that buying diamonds actually working, except those ad free subscription was not working. I contacted game dev for this issue, they cant seems to solve anything and asked me to contact Apple Support. But Apple Support doesnt solve the issue as well and asked me to contact the game dev. I guess i will need to wait for next update to see whether this issue will finally solve or not.

Hello, I installed iOS 26 beta 1 yesterday when it came off but now, when I plug my iPhone, it just do nothing. I can charge it via the induction charger but I can't via USB-C port. The other way I can charge it is by turning my iPhone off and plugging it so it starts and then it charges via USB-C Port even when it starts. The thing is that when I unplug the cable and try to plug it back in, it doesn't charge anymore... I tried to put the restore mode (with the Mac and the cable on the screen) and even the DFU Mode but the iPhone is not detected by my Macbook and it's the same thing for my Windows PC : not detected... I also tried to erase the settings and content but same issue... Not charging Apple Store can do nothing because it's a dev beta... Am I the only one to have that issue ?

O aplicativo do PAGBANK e do IFOOD PAGO não funcionam com a versão do IOS26. Está me causando muitos contra tempos… O que devo fazer!?

Hi, I've been trying to debug an issue with my extension. I am able to register the extension on install of my app, can select it under Phone> SMS/Call Reporting. When I touch Report it brings up my view controller, with the sender and message details. I set let response = ILClassificationResponse(action: .reportJunk) I've added debug logs throughout my extension and everything looks good. Now when MobileSMS takes over, I see: default 23:15:09.837024-0400 MobileSMS response: extension: error 23:15:09.837328-0400 MobileSMS error reporting SMS response: default 23:15:09.837387-0400 MobileSMS Finished, invoking didCompleteClassificationRequest info 23:15:09.837487-0400 MobileSMS didCompleteClassificationRequest -- di I don't see what the error is, and that last log entry is cut off at "di". I've confirmed my info.plist, allowed domains, aasa, and my remote API is not touched. Any advice? Xcode 16.3 Testing on iPhone 16e iOS 18.4.1

The last couple of days ago, I tried to taste iOS 26. It’s a really awesome experience as an iOS user. But there were some issues that appeared when I was playing the games. So I downgraded to iOS 18.5. My phone is 13, and I checked my model number and downloaded 18.5 firmware from Apple user's well-known website and carefully making the downgrading process. After hours later I already got back 18.5, and I confess, the user experience is very different between iOS 26 and 18.5. The main problem is there, when I make phone calls with my friends and I notice my recent call history is empty. So I try to fix it the ways from YouTube videos. It doesn’t work. I tried to change the region and restart my phone. It doesn’t work, and I tried to syns with iCloud also doesn’t work. If you are facing an issue like mine, please kindly share the experience and how to fix it! Kindly see the attached photos. The notification appears as shown, but when I check the recent calls, there is no data available.

Hello, I have a question regarding the ethernet-over-USB-C stack within iOS/iPadOS. It seems that when manually assigning an IP on this interface within iOS, the IP is stored. Therefore, when disconnecting (the USB-C cable) and reconnecting to another device for a subsequent ethernet connection, the iOS device will always default to the previously assigned IP address (obviously, this isn't the case if the other end is a DHCP server). So, within the iPhone's Ethernet-over-USB-C driver, I was curious if iOS just keeps the assignment based on the MAC of the local USB-C interface, or is stored information tied to some other identifier? Is there a way to override this behavior? Thank you

calling this app store connect API returns 201 created but does not clear purchase history for sandbox account

I need your help, my pass is window 11, Lenovo laptop and I have 6gb and 512gb storage and I have to run export on us through virtual machine because I have pass membership to run display on I can use it in a window 11 laptop.... thank you 🙏🏻 Yours faithfully Akansha

Hi I recently installed iOS 26 but did not make a backup, how can I get iOS 18 without losing any data?