Dear Team, We are working on retrieving email address of the user joined to Entra ID from Entra-joined macOS devices, specifically while running in a system context.The sudo dscl . -read /Users/$(whoami) RecordName command give the local user name whose password is synced with the entra ID. We would greatly appreciate guidance on how to retrieve the Entra ID joined user’s email address in a system context from Entra Joined mac devices, especially from those with prior experience in this area. Thank you for your support.

I've account access level of developer. I want to create app specific password but go through the account but could not get any option to do so. Can somebody help me on this. Thanks in advance.

Hello, I'm working in the team with 70 i(Pad)OS test devices running 24/7, and 40 of them are iOS 18 or 26. The problem is: for enterprise apps to be tested (signed with ADEP inhouse profile) the devices over iOS 18 require Enterprise App developers to be allowed at least once with physical control on-device after reboot, which is quite burdensome because we put all the devices in the restricted area, supposed to be used from the remote. Devices are logged into Apple ID for the prevention of Activation Lock but no preparation nor management via MDM over Apple Configurator 2. Is there any binary, tool, app that can check (letting us allow devices for those developers would be even better) if the Enterprise App developer(s) are allowed for the device via terminal or VNC?

I've been running the betas fine for a while, now, where do you want to go??

As we know, we can't add restrictions payload in the mobileconfig when registing the device. We are developing MDM by ourselfs, met some trouble. Please help.

Hi, I’m testing the ClearPasscode MDM command: https://developer.apple.com/documentation/devicemanagement/clear-passcode-command Question: If a user enters the passcode incorrectly multiple times and the device becomes temporarily locked (e.g., “Try again in X minutes”) or reaches “Security Lockout”, can ClearPasscode still be executed successfully while the device is in that state? {'ErrorCode': 5013, 35708 'ErrorDomain': 'MCPasscodeErrorDomain', 35709 'LocalizedDescription': '\xe3\x81\x93...x89', 35710 'USEnglishDescription': 'The passcode cannot be cleared (-1)'} If it depends on conditions (e.g., supervised vs. user enrollment, availability of UnlockToken, network/check-in state), could you clarify which conditions are required? Thank you.

Hi everyone, I’m sharing this because I’ve been stuck with this issue for over two weeks, and I still haven’t found a solution — or received a meaningful response from Apple Support. A yellow banner has appeared on my account saying: “The Apple Developer Program License Agreement has been updated and needs to be reviewed.” But here’s the problem: I’ve already accepted the latest agreement long ago. When I log into both: App Store Connect Developer Portal …there’s no new agreement to accept, no prompt, no button — absolutely nothing new. The yellow banner simply refuses to go away, and it's preventing updates. I’ve already: Cleared cache & cookies Tried Safari, Chrome, Firefox Logged in from different devices/networks Verified that I am the Account Holder Reported the issue via Apple Developer Support (more than a week ago) Despite clearly stating the urgency of the matter, I’ve received no fix and no timeline. This is beginning to feel like developers’ time — especially for those who depend on timely releases — isn’t being taken seriously. So I’m writing here to ask: 🔹 Has anyone else encountered this same issue recently? 🔹 Is there any known workaround or fix? I’d appreciate any help or shared experience. Thank you.

I am checking the response of DeviceInformation Command to collect network information from iPad. On iPad(iPad Pro 11, M4) devices that use WiFi without inserting Usim or Esim, network values ​​such as CurrentMCC and ICCID are received in response to the DeviceInformation command. cf.)Even though it may be garbage value, I blurred the unique information just in case. <key>ServiceSubscriptions</key> <array> <dict> <key>CarrierSettingsVersion</key> <string>61.0</string> <key>CurrentCarrierNetwork</key> <string></string> <key>CurrentMCC</key> <string>450</string> <key>CurrentMNC</key> <string>08</string> <key>EID</key> <string>blah blah</string> <key>ICCID</key> <string>blah balh</string> <key>IMEI</key> <string>blah blah</string> <key>IsDataPreferred</key> <true/> <key>IsRoaming</key> <true/> <key>IsVoicePreferred</key> <false/> <key>Label</key> <string>Provisioning</string> <key>LabelID</key> <string>00000000-0000-0000-0000-000000000000</string> <key>PhoneNumber</key> <string></string> <key>Slot</key> <string>CTSubscriptionSlotOne</string> <key>SubscriberCarrierNetwork</key> <string>iPad</string> </dict> </array> This is a bit weird. If I collect the same information from an iPhone(iPhone 15 Pro Max) that only uses wifi and does not use Usim or Esim, it does not respond with values ​​like ICCID, CurrentMCC, etc. <key>ServiceSubscriptions</key> <array> <dict> <key>IMEI</key> <string>blah blah</string> <key>Slot</key> <string>CTSubscriptionSlotOne</string> </dict> <dict> <key>EID</key> <string>blah blah</string> <key>IMEI</key> <string>blah blah</string> <key>Slot</key> <string>CTSubscriptionSlotTwo</string> </dict> </array> I'm confused by the network information collected. Is there a reason why the collected network information of iPad and iPhone are different?

Issue Description: We are experiencing MDM profile installation failures specifically on iPhone 17 devices. After extensive testing and comparison between affected and working devices, we suspect this appears to be a parameter transmission error rather than device settings. Technical Analysis: Device Settings Comparison: No differences found between problematic and working devices in system settings, indicating this is not a configuration issue. Suspected Parameter Transmission Error: • Device model information appears to be restricted or blocked during profile download • User ID and phone number parameters are not being transmitted to the server • Installation logs show missing login ID and phone number entries Symptoms: • During MDM profile installation, the "Apps & Restrictions" section that should appear is missing • Profile download parameters are suspected to not be properly transmitted to the server • Installation process fails at the profile configuration stage Critical Finding: When we cloned a previously working device to create a problematic device configuration, the cloned device also began experiencing the same installation failures. This strongly suggests the issue is related to device-specific parameters or identifiers. Additional Information: We continue to receive reports of this issue from our iPhone 17 users, and these reports are occurring across various iOS versions. Request for Assistance: Has anyone encountered similar MDM profile installation issues on iPhone 17? Are there known limitations or changes in how device parameters are transmitted during MDM enrollment on this model? Any guidance on debugging parameter transmission or known workarounds would be greatly appreciated.

Hi Team, As per this documentation Handling NotNow Status Responses | Apple Developer Documentation, the last command that is delivered to the device on a connection should be the one that the device reported NotNow so that the device will automatically retry when it is ready to consume commands. Our question is it possible to have a fixed command which we can try at the end once all commands are tried and if device has reported NotNow for any of the commands. E.g. If there were 3 commands delivered to the device one by one SSO profile (com.apple.sso ) was delivered and device reported NotNow VPN profile (com.apple.vpn.managed) was delivered and the device reported NotNow DeviceInformation command was delivered and the device reported Acknowledged. As there were NotNow responses earlier, can we try a certificate profile(com.apple.security.pkcs1), with a dummy certificate payload, to ensure that the last command delivered to the device in this connection is responded with NotNow. Questions: Can we use a fixed command e.g. certificate profile(com.apple.security.pkcs1) as in above example to ensure the last command delivered to the device has NotNow response. Or is it better to try one of the commands which the device reported NotNow earlier. As in above example should we try the SSO or VPN profile at step 4 instead of the certificate profile? Following up to above, when a device reports NotNow for any profile installation command, can we say it will always report NotNow for certificate profile(com.apple.security.pkcs1) as well for all iOS and MacOS devices?

We have couple of devices that are registered into Platform SSO, and we have been noticing an issue when the user tried to login. After the users enters the password and hit the return key nothing happens, they need to hit the return key probably 10-15 times in order for the login to happen, the password entered is the correct one and it's just that hitting the return key doesn't invoke the login. On checking the log of the device one unusual thing that we noticed as compared to a different device where the login is working in a single go is that the AppSSOAgent or AppSSODaemon process were not getting invoked

I have created a jwt token with headers { 'typ': 'JWT', 'alg': 'RS256' } and claim as : { 'iss': dep server UUID from Accounts call, 'iat': epoc time in seconds, 'jti': random uuid, 'service_type': 'com.apple.maid' } And signed the token with private key created during DEP MDM server creation. On the device I see Verification error when tried to login with Managed Apple account. In ABM, Access management setting was set to Managed Devices /Supervised only. Any help would be appreciated.

We’re exploring the use of Apple’s Automatic Assessment Configuration entitlement for an iOS app currently in the proof-of-concept stage. We’re enrolled in the Apple Developer Program with an active subscription. Both the Account Holder and team members have accepted all relevant license agreements. However, when we try to access the entitlement request form at: 👉 https://developer.apple.com/contact/request/automatic-assessment-configuration/ We are immediately redirected to: 🚫 https://developer.apple.com/unauthorized/ This happens for all team members, including the Account Holder, so it doesn’t appear to be a role-specific permissions issue. The app is still in the proof-of-concept stage — there’s no App Store listing or App ID yet. We’re trying to confirm entitlement eligibility before proceeding further. Questions: Is an App Store listing or App ID required to access this request form? Are there any hidden prerequisites (account permissions, team roles, prior submissions, etc.) that need to be fulfilled? Has anyone here successfully submitted this form — and if so, what steps or conditions were required? Any guidance or shared experience would be greatly appreciated. Thanks in advance!

Hi everyone, I'm running an Apple MDM service and encountering an issue where a number of devices stop receiving MDM push commands within 10 days of profile installation, even though everything appears to be set up correctly. Environment: MDM profile is installed and verified (status: OK, result: SUCCESS) Devices are cellular-enabled with no connectivity issues APNs certificate is valid (thousands of other devices are communicating normally) The command being sent to devices is DeviceInformationCommand No "NotNow" response or any check-in received from the affected devices for over a week Issue: We send DeviceInformationCommand to devices to retrieve device information and update the last communication timestamp. However, a subset of devices simply stop responding to this command within 10 days of profile installation. The last communication date is not being updated, and no response — not even a "NotNow" — is coming back from these devices. Since other devices on the same MDM setup are working fine, I've ruled out APNs certificate expiration and general server-side issues. Questions: Are there any known management points or configuration settings that could cause a device to silently stop receiving DeviceInformationCommand shortly after enrollment? What diagnostic steps would you recommend to identify the root cause on the device or server side? Are there any known bugs or reported issues related to this behavior in recent iOS versions? Is there any way to recover the MDM communication without requiring the user to re-enroll? Any insights or suggestions would be greatly appreciated. Thank you!

Target Device: iPhone 13, iOS 18.5, enroll to MDM by enrollment profile Command: Response: Anyone could help?

Hello, I would like to ask a question regarding documentation related to app sales. Currently, I’m researching the sales process for an app and realized that I lack sufficient understanding when it comes to creating official documents such as estimates, invoices, and receipts — especially when dealing with corporate clients. In our company’s case, we can issue documents based on the net revenue (after platform fees are deducted). However, when issuing these documents to a client, would it be more appropriate to include a breakdown showing both the platform fee and the app usage fee? I would greatly appreciate any insights or examples of how others have handled similar situations. Thank you in advance.

The result Plist for the InstalledApplicationList MDM command is reporting duplicate Application identifiers. Sometimes with different version, other times with the same version. The device is MacOS 15.5, Enrolled via ABM (Supervised). Here are a couple samples from the returned list. Duplicate app: <key>BundleSize</key> <integer>398051</integer> <key>Identifier</key> <string>com.adobe.Acrobat.NativeMessagingHost</string> <key>Installing</key> <false/> <key>Name</key> <string>NativeMessagingHost</string> <key>ShortVersion</key> <string>5.0</string> <key>Version</key> <string>5.0</string> </dict> <dict> <key>BundleSize</key> <integer>398051</integer> <key>Identifier</key> <string>com.adobe.Acrobat.NativeMessagingHost</string> <key>Installing</key> <false/> <key>Name</key> <string>NativeMessagingHost</string> <key>ShortVersion</key> <string>5.0</string> <key>Version</key> <string>5.0</string> </dict> Different Version: <key>BundleSize</key> <integer>4197200</integer> <key>Identifier</key> <string>com.adobe.adobe_licutil</string> <key>Installing</key> <false/> <key>Name</key> <string>adobe_licutil</string> <key>ShortVersion</key> <string>11.0.0.39</string> <key>Version</key> <string>11.0.0.39</string> </dict> <dict> <key>BundleSize</key> <integer>4443177</integer> <key>Identifier</key> <string>com.adobe.AcroLicApp</string> <key>Installing</key> <false/> <key>Name</key> <string>AcroLicApp</string> <key>ShortVersion</key> <string>25.001.20432</string> <key>Version</key> <string>25.001.20432</string> </dict> <dict> <key>BundleSize</key> <integer>7380980</integer> <key>Identifier</key> <string>com.adobe.adobe_licutil</string> <key>Installing</key> <false/> <key>Name</key> <string>adobe_licutil</string> <key>ShortVersion</key> <string>10.0.0.274</string> <key>Version</key> <string>10.0.0.274</string> </dict>

We are expering frequent delays recently when associating a device serial with the adamid of an app in our business manager account. I get an event id back when calling the /associate api but when i check the status of that event id is can be sat in a pending state for sometimes several hours. Need to understand why and if its a configuration issue

We’re using the Apple Developer Enterprise Program for internal app distribution. The Apple ID is a generic one using our domain email, but the Account Holder is a real person with authority in the organization. For the payment method, we plan to use a corporate credit card — but it is issued under a different staff name (e.g. card under Chief, but Account Holder is IT Head). Just want to check: • Is this setup acceptable? • Will Apple reject the enrollment/renewal if the card name doesn’t match the Account Holder? • What’s the best practice in this case to avoid delays or verification issues? Appreciate any guidance or experience from the community. Thanks!

Hi all, I'm implementing Intune MAM to secure applications on iOS. However, I need my users to be able to save files (e.g. attachments in an email in the Outlook app) to iOS Files. To do so, I'm trying to put Files in exception of my Intune MAM policy and I need to obtain the Files "CFBundleURLSchemes" value from the info.plist file of the Files app. I'm not able to get that information. Are any of you able to get that somehow? Thanks!