When installing a new version the app while a tunnel is connected, seemingly the old packet tunnel process gets stopped but the new one does not come back up. Reportedly, a path monitor is reporting that the device has no connectivity. Is this the expected behavior? When installing an update from TestFlight or the App store, the packet tunnel instance from the old tunnel is stopped, but, due to the profile being on-demand and incldueAllNetworks, the path monitoring believes the device has no connectivity - so the new app is never downloaded. Is this the expected behavior? During development, the old packet tunnel gets stopped, the new app is installed, but the new packet tunnel is never started. To start it, the user has to toggle the VPN twice from the Settings app. The tunnel could be started from the VPN app too, if we chose to not take the path monitor into account, but then the user still needs to attempt to start the tunnel twice - it only works on the second try. As far as we can tell, the first time around, the packet tunnel never gets started, the app receives an update about NEVPNStatus being set to disconnecting yet NEVPNConnection does not throw. The behavior I was naively expecting was that the packet tunnel process would be stopped only when the new app is fully downloaded and when the update is installed, Are we doing something horribly wrong here?

I'm developing a Matter-over-thread generic switch with 2 generic switch endpoints. This is configured as an Intermittently Connected Device with Long Idle Time. I have an Apple TV serving as the thread border router. I'm able to commission the device successfully in the Home app and assign actions to each of the buttons however when the device is rebooted the subscription doesn't appear to resume successfully and the buttons no longer work. I've tested this on various SOC's with their respective SDKs including ESP32-C6, nrf52840 and EFR32MG24 and the behaviour was consistent across all of them. It was working originally when I first started out on the ESP32-C6, then the issue popped up first when I was testing the nrf52840. In that SDK I set persistent subscriptions explicitly and it seemed to resolve the issue until it popped up again when I found that unplugging and restarting the Apple TV completely which appeared to fix the issue with subscriptions not resuming. Recently I've added a Home Pod Mini Gen 2 to the matter fabric so there are now two TBR on the network and restarting both the Apple TV and the HomePod doesn't appear to resolve the issue anymore and the subscriptions are not resuming across all three SOC's on device reboot I'm wondering if there might be something preventing the subscriptions from resuming?

Hi Team, I have a Network Extension application and UI frontend for it. The UI frontend talks to the Network Extension using XPC, as provided by NEMachServiceName. On M2 machine, The application and XPC connection works fine on clean installation. But, when the application is upgraded, the XPC connection keeps failing. Upgrade steps: PreInstall script kills the running processes, both UI and Network Extension Let installation continue PostInstall script to launch the application after installation complete. Following code is successful to the point of resume from UI application NSXPCInterface *exportedInterface = [NSXPCInterface interfaceWithProtocol:@protocol(IPCUIObject)]; newConnection.exportedInterface = exportedInterface; newConnection.exportedObject = delegate; NSXPCInterface *remoteObjectInterface = [NSXPCInterface interfaceWithProtocol:@protocol(IPCExtObject)]; newConnection.remoteObjectInterface = remoteObjectInterface; self.currentConnection = newConnection; [newConnection resume]; But it fails to get the object id<IPCExtObject> providerProxy = [self.currentConnection remoteObjectProxyWithErrorHandler:^(NSError *registerError) { }]; Please note, this only fails for M2. For M1, this exact code is running fine. Additionally, if I uninstall the application by dropping it in Trash and then installing the newer version, then too, the application works fine.

In our project, we download H5 resources to the local device and then open the H5 pages through WKWebView(-loadFileURL:allowingReadAccessToURL:). When the H5 pages request server resources, cookies are required. Before opening the H5 page, we set the required cookies in the WKHTTPCookieStore using the setCookie method. Additionally, we set the allowFileAccessFromFileURLs and allowUniversalAccessFromFileURLs properties for the WebView. On other mobile phones, the cookies can be carried normally. However, on mobile phones running the iOS 18.0 system, the cookies cannot be carried. Moreover, this problem only emerged after we upgraded Xcode to version 16.2. We've also tried injecting cookies via JavaScript, but it didn't work(document.cookie = xx=${xx}; path=/; expires=weekday, xx jan xxxx xx:xx:xx GMT; Domain=example.com; Secure; SameSite=None ;). Can anyone help me on this? Thanks in advance.

When i try to set the value ‘false’ for ‘usesClassicLoadingMode’ it is getting crashed. The crash logs has been shared below Ex: let config = URLSessionConfiguration.default if #available(iOS 18.4, *) { config.usesClassicLoadingMode = false } Error log : *** Terminating app due to uncaught exception 'NSInvalidArgumentException', reason: '-[__NSCFBoolean objectForKeyedSubscript:]: unrecognized selector sent to instance 0x1f655c390' *** First throw call stack: (0x188ae52ec 0x185f69a7c 0x188b4f67c 0x1889fcb84 0x1889fc4f0 0x191393bc8 0x1889ec8a0 0x1889ec6e4 0x191393ad0 0x191344dac 0x191344b58 0x107cfa064 0x107ce36d0 0x191343fcc 0x1891b3b18 0x1892dae58 0x189235c60 0x18921e270 0x18921d77c 0x18921a8ac 0x107ce0584 0x107cfa064 0x107ce891c 0x107ce95d8 0x107ceabcc 0x107cf5894 0x107cf4eb0 0x212f51660 0x212f4e9f8) terminating due to uncaught exception of type NSException Can you please provider the resolution steps

Hi, I’m trying to download a remote file in the background, but I keep getting a strange behaviour where URLSession download my file indefinitely during a few minutes, without calling urlSession(_:downloadTask:didFinishDownloadingTo:) until the download eventually times out. To find out that it’s looping, I’ve observed the total bytes written on disk by implementing urlSession(_:downloadTask:didWriteData:totalBytesWritten:totalBytesExpectedToWrite:). Note that I can't know the size of the file. The server is not able to calculate the size. Below is my implementation. I create an instance of URLSession like this: private lazy var session: URLSession = { let configuration = URLSessionConfiguration.background(withIdentifier: backgroundIdentifier) configuration.isDiscretionary = false configuration.sessionSendsLaunchEvents = true return URLSession(configuration: configuration, delegate: self, delegateQueue: nil) }() My service is using async/await so I have implemented an AsyncThrowingStream : private var downloadTask: URLSessionDownloadTask? private var continuation: AsyncThrowingStream&lt;(URL, URLResponse), Error&gt;.Continuation? private var stream: AsyncThrowingStream&lt;(URL, URLResponse), Error&gt; { AsyncThrowingStream&lt;(URL, URLResponse), Error&gt; { continuation in self.continuation = continuation self.continuation?.onTermination = { @Sendable [weak self] data in self?.downloadTask?.cancel() } downloadTask?.resume() } } Then to start the download, I do : private func download(with request: URLRequest) async throws -&gt; (URL, URLResponse) { do { downloadTask = session.downloadTask(with: request) for try await (url, response) in stream { return (url, response) } throw NetworkingError.couldNotBuildRequest } catch { throw error } } Then in the delegate : public func urlSession(_ session: URLSession, downloadTask: URLSessionDownloadTask, didFinishDownloadingTo location: URL) { guard let response = downloadTask.response, downloadTask.error == nil, (response as? HTTPURLResponse)?.statusCode == 200 else { continuation?.finish(throwing: downloadTask.error) return } do { let documentsURL = try FileManager.default.url(for: .documentDirectory, in: .userDomainMask, appropriateFor: nil, create: false) let savedURL = documentsURL.appendingPathComponent(location.lastPathComponent) try FileManager.default.moveItem(at: location, to: savedURL) continuation?.yield((savedURL, response)) continuation?.finish() } catch { continuation?.finish(throwing: error) } } I also tried to replace let configuration = URLSessionConfiguration.background(withIdentifier: backgroundIdentifier) by let configuration = URLSessionConfiguration.default and this time I get a different error at the end of the download: Task &lt;0457F755-9C52-4CFB-BDB2-F378D0C94912&gt;.&lt;1&gt; failed strict content length check - expected: 0, received: 530692, received (uncompressed): 0 Task &lt;0457F755-9C52-4CFB-BDB2-F378D0C94912&gt;.&lt;1&gt; finished with error [-1005] Error Domain=NSURLErrorDomain Code=-1005 "The network connection was lost." UserInfo={NSLocalizedDescription=The network connection was lost., NSErrorFailingURLStringKey=https:/&lt;host&gt;:8190/proxy?Func=downloadVideoByUrl&amp;SessionId=slufzwrMadvyJad8Lkmi9RUNAeqeq, NSErrorFailingURLKey=https://&lt;host&gt;:8190/proxy?Func=downloadVideoByUrl&amp;SessionId=slufzwrMadvyJad8Lkmi9RUNAeqeq, _NSURLErrorRelatedURLSessionTaskErrorKey=( "LocalDownloadTask &lt;0457F755-9C52-4CFB-BDB2-F378D0C94912&gt;.&lt;1&gt;" ), _NSURLErrorFailingURLSessionTaskErrorKey=LocalDownloadTask &lt;0457F755-9C52-4CFB-BDB2-F378D0C94912&gt;.&lt;1&gt;, NSUnderlyingError=0x300d9a7c0 {Error Domain=kCFErrorDomainCFNetwork Code=-1005 "(null)" UserInfo={NSErrorPeerAddressKey=&lt;CFData 0x302139db0 [0x1fcb1f598]&gt;{length = 16, capacity = 16, bytes = 0x10021ffe91e227500000000000000000}}}} The log "failed strict content length check” made me look into the response header, which has the following: content-length: 0 Content-Type: application/force-download Transfer-encoding: chunked Connection: KEEP-ALIVE Content-Transfer-Encoding: binary So it should be fine the way I setup my URLSession. The download works fine in Chrome/Safari/Chrome or Postman. My code used to work a couple of weeks before, so I expect something has changed on the server side, but I can’t find what, and I don’t get much help from the guys on the server side. Has anyone an idea of what’s going on?

We are using the [NEHotspotHelper supportedNetworkInterfaces] to get the Wi-Fi interface in our app, but it occasionally crashes on some devices with the following stack trace: 0 CaptiveNetwork 0x0000000221d87a4c ServerConnectionGetHandlerQueue + 0 (ServerConnection.c:509) 1 CaptiveNetwork 0x0000000221d8577c CNPluginCopySupportedInterfaces + 180 (CNPlugin.c:457) 2 NetworkExtension 0x00000001b0446618 +[NEHotspotHelper supportedNetworkInterfaces] + 32 (NEHotspotHelper.m:563) It seems like the crash is happening on apple's api of supportedNetworkInterfaces. We would like to understand the cause of the crash.

My laptop (M1 Pro, macOS 15.3.2) is connected to a dual stack network via Wi-Fi. The home.arpa. domain is supplied as a search domain via both DHCPv4 (options 15 and 119) and DHCPv6 (option 24). "Details…" for the network connection in System Settings show this domain under the DNS tab. The laptop uses a Forwarding DNS Resolver of my router, which in turn forwards requests for home.arpa. (including subdomains) to a local DNS server (CoreDNS) which is authoritative for this zone. The DNS server is configured via the following zone file: $ORIGIN home.arpa. $TTL 3600 @ IN SOA @ nobody.invalid. (1 3600 1200 604800 3600) @ NS @ @ AAAA ….1 gateway A ….1 gateway AAAA …::1 b._dns-sd._udp PTR @ lb._dns-sd._udp PTR @ db._dns-sd._udp PTR @ _services._dns-sd._udp PTR _smb._tcp _smb._tcp PTR Media._smb._tcp Media._smb._tcp SRV 0 0 445 gateway Media._smb._tcp TXT ("path=/media" "u=guest") Output of dig(1) looks like: $ dig @….1 -t PTR lb._dns-sd._udp.home.arpa. ;; Got answer: ;; ->>HEADER<<- opcode: QUERY, status: NOERROR, id: 43291 ;; flags: qr rd ra; QUERY: 1, ANSWER: 1, AUTHORITY: 1, ADDITIONAL: 0 ;; QUESTION SECTION: ;lb._dns-sd._udp.home.arpa. IN PTR ;; ANSWER SECTION: lb._dns-sd._udp.home.arpa. 1993 IN PTR home.arpa. ;; AUTHORITY SECTION: home.arpa. 2771 IN NS home.arpa. $ dig @….1 -t PTR _services._dns-sd._udp.home.arpa. ;; Got answer: ;; ->>HEADER<<- opcode: QUERY, status: NOERROR, id: 9057 ;; flags: qr rd ra; QUERY: 1, ANSWER: 1, AUTHORITY: 1, ADDITIONAL: 0 ;; QUESTION SECTION: ;_services._dns-sd._udp.home.arpa. IN PTR ;; ANSWER SECTION: _services._dns-sd._udp.home.arpa. 3600 IN PTR _smb._tcp.home.arpa. ;; AUTHORITY SECTION: home.arpa. 3600 IN NS home.arpa. $ dig @….1 -t PTR _smb._tcp.home.arpa. ;; Got answer: ;; ->>HEADER<<- opcode: QUERY, status: NOERROR, id: 44220 ;; flags: qr rd ra; QUERY: 1, ANSWER: 1, AUTHORITY: 1, ADDITIONAL: 0 ;; QUESTION SECTION: ;_smb._tcp.home.arpa. IN PTR ;; ANSWER SECTION: _smb._tcp.home.arpa. 3599 IN PTR Media._smb._tcp.home.arpa. ;; AUTHORITY SECTION: home.arpa. 3599 IN NS home.arpa. $ dig @….1 -t SRV Media._smb._tcp.home.arpa. ;; Got answer: ;; ->>HEADER<<- opcode: QUERY, status: NOERROR, id: 45878 ;; flags: qr rd ra; QUERY: 1, ANSWER: 1, AUTHORITY: 1, ADDITIONAL: 0 ;; QUESTION SECTION: ;Media._smb._tcp.home.arpa. IN SRV ;; ANSWER SECTION: media._smb._tcp.home.arpa. 3600 IN SRV 0 0 445 gateway.home.arpa. ;; AUTHORITY SECTION: home.arpa. 3600 IN NS home.arpa. $ dig @….1 -t A gateway.home.arpa. ;; Got answer: ;; ->>HEADER<<- opcode: QUERY, status: NOERROR, id: 2782 ;; flags: qr rd ra; QUERY: 1, ANSWER: 1, AUTHORITY: 1, ADDITIONAL: 0 ;; QUESTION SECTION: ;gateway.home.arpa. IN A ;; ANSWER SECTION: gateway.home.arpa. 86400 IN A 192.168.99.1 ;; AUTHORITY SECTION: home.arpa. 3578 IN NS home.arpa. $ dig @….1 -t AAAA gateway.home.arpa. ;; Got answer: ;; ->>HEADER<<- opcode: QUERY, status: NOERROR, id: 17297 ;; flags: qr rd ra; QUERY: 1, ANSWER: 1, AUTHORITY: 1, ADDITIONAL: 0 ;; QUESTION SECTION: ;gateway.home.arpa. IN AAAA ;; ANSWER SECTION: gateway.home.arpa. 3600 IN AAAA fd6f:9784:5753::1 ;; AUTHORITY SECTION: home.arpa. 3600 IN NS home.arpa. Output of dns-sd(1): /usr/bin/dns-sd -test … Testing for error returns when various strings are > 63 bytes: PASSED Running basic API input range tests with various pointer parameters set to NULL: Basic API input range tests: PASSED $ dns-sd -m -F Looking for recommended browsing domains: DATE: ---Fri 11 Apr 2025--- 8:50:17.846 ...STARTING... Timestamp Recommended Browsing domain 8:50:17.847 Added (More) local 8:50:17.847 Added arpa - > home $ dns-sd -B _smb._tcp home.arpa. Browsing for _smb._tcp.home.arpa. DATE: ---Fri 11 Apr 2025--- 8:59:10.044 ...STARTING... $ dns-sd -L Media _smb._tcp home.arpa. Lookup Media._smb._tcp.home.arpa. DATE: ---Fri 11 Apr 2025--- 9:15:53.328 ...STARTING... $ dns-sd -Q _smb._tcp.home.arpa. PTR IN DATE: ---Fri 11 Apr 2025--- 9:16:52.208 ...STARTING... Timestamp A/R Flags IF Name Type Class Rdata 9:16:52.210 Add 40000002 0 _smb._tcp.home.arpa. PTR IN 0.0.0.0 No Such Record 9:16:52.222 Add 2 0 _smb._tcp.home.arpa. PTR IN 0.0.0.0 No Such Record Similarly, when I open Finder->Network I see home.arpa but it's empty. Of interest is that on the DNS server side I see the following requests being made: 2025-04-11 09:03:15 container,info,debug [INFO] […]:56541 - 21555 "SOA IN _afpovertcp._tcp.home.arpa. udp 44 false 512" NXDOMAIN qr,aa,rd 112 0.000755089s 2025-04-11 09:03:15 container,info,debug [INFO] […]:56077 - 58266 "SOA IN _smb._tcp.home.arpa. udp 37 false 512" NOERROR qr,aa,rd 105 0.001012632s 2025-04-11 09:03:15 container,info,debug [INFO] […]:45274 - 45976 "SOA IN _rfb._tcp.home.arpa. udp 37 false 512" NXDOMAIN qr,aa,rd 105 0.000762339s 2025-04-11 09:03:15 container,info,debug [INFO] […]:54387 - 32090 "SOA IN _adisk._tcp.home.arpa. udp 39 false 512" NXDOMAIN qr,aa,rd 107 0.001058132s 2025-04-11 09:03:15 container,info,debug [INFO] […]:35855 - 51155 "SOA IN _tcp.home.arpa. udp 32 false 512" NOERROR qr,aa,rd 100 0.000664963s I suppose that an attempt to locate services is made but it's unsuccessful and I'm not sure why. What further debugging can I attempt?

Hello there, Starting from iOS 18.4, support was included for QWAC Validation and QCStatements. Using the official QWAC Validator at: https://eidas.ec.europa.eu/efda/qwac-validation-tool I was able to check that the domain "eidas.ec.europa.eu" has a valid QWAC certificate. However, when trying to obtain the same result using the new API, I do not obtain the same result. Here is my sample playground code: import Foundation import Security import PlaygroundSupport PlaygroundPage.current.needsIndefiniteExecution = true @MainActor class CertificateFetcher: NSObject, URLSessionDelegate { private let url: URL init(url: URL) { self.url = url super.init() } func start() { let session = URLSession(configuration: .ephemeral, delegate: self, delegateQueue: nil) let task = session.dataTask(with: url) { data, response, error in if let error = error { print("Error during request: \(error)") } else { print("Request completed.") } } task.resume() } nonisolated func urlSession(_ session: URLSession, didReceive challenge: URLAuthenticationChallenge, completionHandler: @escaping (URLSession.AuthChallengeDisposition, URLCredential?) -&gt; Void) { guard let trust = challenge.protectionSpace.serverTrust else { completionHandler(.cancelAuthenticationChallenge, nil) return } if let certificates = SecTrustCopyCertificateChain(trust) as? [SecCertificate] { self.checkQWAC(certificates: certificates) } let credential = URLCredential(trust: trust) completionHandler(.useCredential, credential) } nonisolated func checkQWAC(certificates: [SecCertificate]) { let policy = SecPolicyCreateSSL(true, nil) var trust: SecTrust? guard SecTrustCreateWithCertificates(certificates as CFArray, policy, &amp;trust) == noErr, let trust else { print("Unable to create SecTrust") return } var error: CFError? guard SecTrustEvaluateWithError(trust, &amp;error) else { print("Trust evaluation failed") return } guard let result = SecTrustCopyResult(trust) as? [String : Any] else { print("No result dictionary") return } let qwacStatus = result[kSecTrustQWACValidation as String] let qcStatements = result[kSecTrustQCStatements as String] print("QWAC Status: \(String(describing: qwacStatus))") print("QC Statements: \(String(describing: qcStatements))") } } let url = URL(string: "https://eidas.ec.europa.eu/")! let fetcher = CertificateFetcher(url: url) fetcher.start() Which prints: QWAC Status: nil QC Statements: nil Request completed. Am I making a mistake while using the Security framework? I would greatly appreciate any help or guidance you can provide.

I am in the middle of investigating an issue arising in the call to setsockopt syscall where it returns an undocumented and unexpected errno. As part of that, I'm looking for a way to list any socket content filters or any such extensions are in play on the system where this happens. To do that, I ran: systemextensionsctl list That retuns the following output: 0 extension(s) which seems to indicate there's no filters or extensions in play. However, when I do: netstat -s among other things, it shows: net_api: 2 interface filters currently attached 2 interface filters currently attached by OS 2 interface filters attached since boot 2 interface filters attached since boot by OS ... 4 socket filters currently attached 4 socket filters currently attached by OS 4 socket filters attached since boot 4 socket filters attached since boot by OS What would be the right command/tool/options that I could use to list all the socket filters/extensions (and their details) that are in use and applicable when a call to setsockopt is made from an application on that system? Edit: This is on a macosx-aarch64 with various different OS versions - 13.6.7, 14.3.1 and even 14.4.1.

I'm working on enabling a content filter in my iOS app using NEFilterManager and NEFilterProviderConfiguration. The setup works perfectly in debug builds when running via Xcode, but fails on TestFlight builds with the following error: **Failed to save filter settings: permission denied ** **Here is my current implementation: ** (void)startContentFilter { NSUserDefaults *userDefaults = [NSUserDefaults standardUserDefaults]; [userDefaults synchronize]; [[NEFilterManager sharedManager] loadFromPreferencesWithCompletionHandler:^(NSError * _Nullable error) { dispatch_async(dispatch_get_main_queue(), ^{ if (error) { NSLog(@"Failed to load filter: %@", error.localizedDescription); [self showAlertWithTitle:@"Error" message:[NSString stringWithFormat:@"Failed to load content filter: %@", error.localizedDescription]]; return; } NEFilterProviderConfiguration *filterConfig = [[NEFilterProviderConfiguration alloc] init]; filterConfig.filterSockets = YES; filterConfig.filterBrowsers = YES; NEFilterManager *manager = [NEFilterManager sharedManager]; manager.providerConfiguration = filterConfig; manager.enabled = YES; [manager saveToPreferencesWithCompletionHandler:^(NSError * _Nullable error) { dispatch_async(dispatch_get_main_queue(), ^{ if (error) { NSLog(@"Failed to save filter settings: %@", error.localizedDescription); [self showAlertWithTitle:@"Error" message:[NSString stringWithFormat:@"Failed to save filter settings: %@", error.localizedDescription]]; } else { NSLog(@"Content filter enabled successfully!"); [self showAlertWithTitle:@"Success" message:@"Content filter enabled successfully!"]; } }); }]; }); }]; } **What I've tried: ** Ensured the com.apple.developer.networking.networkextension entitlement is set in both the app and system extension. The Network extension target includes content-filter-provider. Tested only on physical devices. App works in development build, but not from TestFlight. **My questions: ** Why does saveToPreferencesWithCompletionHandler fail with “permission denied” on TestFlight? Are there special entitlements required for using NEFilterManager in production/TestFlight builds? Is MDM (Mobile Device Management) required to deploy apps using content filters? Has anyone successfully implemented NEFilterProviderConfiguration in production, and if so, how?

I am currently creating a MacOS app that uses NetworkExtension and SystemExtension without going through the Store. Using entitlements, I manually codesign and create a pkg Installer, but when I run it I get an error message saying "No matching profile found." Below is the log /Applications/Runetale.app/Contents/MacOS/Runetale not valid: Error Domain=AppleMobileFileIntegrityError Code=-413 "No matching profile found" UserInfo={NSURL=file:///Applications/Runetale.app/, unsatisfiedEntitlements=&lt;CFArray 0x71c040fa0 [0x1f7bec120]&gt;{type = immutable, count = 3, values ​​= ( 0 : &lt;CFString 0x71c04f340 [0x1f7bec120]&gt;{contents = "com.apple.developer.system-extension.install"} 1 : &lt;CFString 0x71c1ccaf0 [0x1f7bec120]&gt;{contents = "com.apple.developer.networking.networkextension"} 2 : &lt;CFString 0x71c04fc00 [0x1f7bec120]&gt;{contents = "com.apple.developer.team-identifier"} )}, NSLocalizedDescription=No matching profile found} I looked into it myself and found that if you want to install the app without going through the Store, you need to use packet-tunnel-provider-systemextension instead of packet-tunnel-provider. here However, simply changing to packet-tunnel-provider-systemextension does not allow the build to pass. I use a build method that changes the value of entitlements only during codesign in order to pass the build. SYSEXT="$APP_BUNDLE/Contents/Library/SystemExtensions/com.runetale.desktop.PacketTunnel.systemextension" if [ -d "$SYSEXT" ]; then echo "Signing PacketTunnel system extension with entitlements..." cp macos/PacketTunnel/PacketTunnelRelease.entitlements macos/PacketTunnel/PacketTunnelRelease-sign.entitlements sed -i '' 's/packet-tunnel-provider/packet-tunnel-provider-systemextension/' macos/PacketTunnel/PacketTunnelRelease-sign.entitlements codesign --force --options runtime --timestamp --entitlements "$ENTITLEMENTS_FILE" --sign "$DEV_ID_APP_CERT" "$SYSEXT" fi # 3. Sign the entire .app bundle (deep sign by signing the outer app after inner ones) echo "Signing Runetale App with entitlements..." cp macos/Runner/Release.entitlements macos/PacketTunnel/Release-sign.entitlements sed -i '' 's/packet-tunnel-provider/packet-tunnel-provider-systemextension/' macos/PacketTunnel/Release-sign.entitlementsmacos/PacketTunnel/Release-sign.entitlements codesign --force --options runtime --timestamp --entitlements "$APP_ENTITLEMENTS_FILE" --sign "$DEV_ID_APP_CERT" "$APP_BUNDLE" Is this build method wrong? The next solution I'm thinking of is as follows. Is there a way to write packet-tunnel-provider-systemextension directly to entitlments and pass the build? (provisioning profile?) Apply to forum and get permission to use packet-tunnel-provider-systemextension Thank you.

When the machine connects to the network cable through the Thunderbolt interface using the docking station, if the Network Extension shown in the following code is running at this time, after unplugging and reinserting the docking station, the machine will not be able to obtain a valid IP address through DHCP until the system is restarted. @interface MyTransparentProxyProvider : NETransparentProxyProvider @end @implementation MyTransparentProxyProvider - (void)startProxyWithOptions:(NSDictionary *)options completionHandler:(void (^)(NSError *))completionHandler { NETransparentProxyNetworkSettings *objSettings = [[NETransparentProxyNetworkSettings alloc] initWithTunnelRemoteAddress:@"127.0.0.1"]; // included rules NENetworkRule *objIncludedNetworkRule = [[NENetworkRule alloc] initWithRemoteNetwork:nil remotePrefix:0 localNetwork:nil localPrefix:0 protocol:NENetworkRuleProtocolAny direction:NETrafficDirectionOutbound]; NSMutableArray<NENetworkRule *> *arrIncludedNetworkRules = [NSMutableArray array]; [arrIncludedNetworkRules addObject:objIncludedNetworkRule]; objSettings.includedNetworkRules = arrIncludedNetworkRules; // apply [self setTunnelNetworkSettings:objSettings completionHandler: ^(NSError * _Nullable error) { // TODO } ]; if (completionHandler != nil) completionHandler(nil); } - (BOOL)handleNewFlow:(NEAppProxyFlow *)flow { return NO; } @end This problem will not occur if the IP of the DNS server or all UDP ports 53 are excluded in the Network Extension. @interface MyTransparentProxyProvider : NETransparentProxyProvider @end @implementation MyTransparentProxyProvider - (void)startProxyWithOptions:(NSDictionary *)options completionHandler:(void (^)(NSError *))completionHandler { NETransparentProxyNetworkSettings *objSettings = [[NETransparentProxyNetworkSettings alloc] initWithTunnelRemoteAddress:@"127.0.0.1"]; // included rules NENetworkRule *objIncludedNetworkRule = [[NENetworkRule alloc] initWithRemoteNetwork:nil remotePrefix:0 localNetwork:nil localPrefix:0 protocol:NENetworkRuleProtocolAny direction:NETrafficDirectionOutbound]; NSMutableArray<NENetworkRule *> *arrIncludedNetworkRules = [NSMutableArray array]; [arrIncludedNetworkRules addObject:objIncludedNetworkRule]; // excluded rules NENetworkRule *objExcludedNetworkRule = [[NENetworkRule alloc] initWithRemoteNetwork:[NWHostEndpoint endpointWithHostname:@"" port:@(53).stringValue] remotePrefix:0 localNetwork:nil localPrefix:0 protocol:NENetworkRuleProtocolUDP direction:NETrafficDirectionOutbound]; NSMutableArray<NENetworkRule *> *arrExcludedNetworkRules = [NSMutableArray array]; [arrExcludedNetworkRules addObject:objExcludedNetworkRule]; objSettings.includedNetworkRules = arrIncludedNetworkRules; objSettings.excludedNetworkRules = arrExcludedNetworkRules; // apply [self setTunnelNetworkSettings:objSettings completionHandler: ^(NSError * _Nullable error) { // TODO } ]; if (completionHandler != nil) completionHandler(nil); } - (BOOL)handleNewFlow:(NEAppProxyFlow *)flow { return NO; } @end Is MyTransparentProxyProvider in what place do wrong? To handle the connection on port 53, it is necessary to add the implementation of NEDNSProxyProvider? In -[MyTransparentProxyProvider handleNewFlow:] how to reverse DNS? getnameinfo() doesn't work, it returns EAI_NONAME.

From time to time the subject of NECP grows up, both here on DevForums and in DTS cases. I’ve posted about this before but I wanted to collect those tidbits into single coherent post. If you have questions or comments, start a new thread in the App & System Services > Networking subtopic and tag it with Network Extension. That way I’ll be sure to see it go by. Share and Enjoy — Quinn “The Eskimo!” @ Developer Technical Support @ Apple let myEmail = "eskimo" + "1" + "@" + "apple.com" A Peek Behind the NECP Curtain NECP stands for Network Extension Control Protocol. It’s a subsystem within the Apple networking stack that controls which programs have access to which network interfaces. It’s vitally important to the Network Extension subsystem, hence the name, but it’s used in many different places. Indeed, a very familiar example of its use is the Settings > Mobile Data [1] user interface on iOS. NECP has no explicit API, although there are APIs that are offer some insight into its state. Continuing the Settings > Mobile Data example above, there is a little-known API, CTCellularData in the Core Telephony framework, that returns whether your app has access to WWAN. Despite having no API, NECP is still relevant to developers. The Settings > Mobile Data example is one place where it affects app developers but it’s most important for Network Extension (NE) developers. A key use case for NECP is to prevent VPN loops. When starting an NE provider, the system configures the NECP policy for the NE provider’s process to prevent it from using a VPN interface. This means that you can safely open a network connection inside your VPN provider without having to worry about its traffic being accidentally routed back to you. This is why, for example, an NE packet tunnel provider can use any networking API it wants, including BSD Sockets, to run its connection without fear of creating a VPN loop [1]. One place that NECP shows up regularly is the system log. Next time you see a system log entry like this: type: debug time: 15:02:54.817903+0000 process: Mail subsystem: com.apple.network category: connection message: nw_protocol_socket_set_necp_attributes [C723.1.1:1] setsockopt 39 SO_NECP_ATTRIBUTES … you’ll at least know what the necp means (-: Finally, a lot of NECP infrastructure is in the Darwin open source. As with all things in Darwin, it’s fine to poke around and see how your favourite feature works, but do not incorporate any information you find into your product. Stuff you uncover by looking in Darwin is not considered API. [1] Settings > Cellular Data if you speak American (-: [2] Network Extension providers can call the createTCPConnection(to:enableTLS:tlsParameters:delegate:) method to create an NWTCPConnection [3] that doesn’t run through the tunnel. You can use that if it’s convenient but you don’t need to use it. [3] NWTCPConnection is now deprecated, but there are non-deprecated equivalents. For the full story, see NWEndpoint History and Advice. Revision History 2025-12-12 Replaced “macOS networking stack” with “Apple networking stack” to avoid giving the impression that this is all about macOS. Added a link to NWEndpoint History and Advice. Made other minor editorial changes. 2023-02-27 First posted.

We're seeing an issue with bonjour services since macOS 15.4 onwards, specifically when running xcuitests on simulators that communicate with an app via bonjour services, the NWListener fails with -65555: NoAuth Interestingly it only fails on subsequent iterations of the test, first iteration always succeeds. The same code works fine on macOS 15.3.1 and earlier, but not 15.4 or 15.5. Is this related to, or the same issue as here? https://developer.apple.com/forums/thread/780655 Also raised in feedback assistant: FB17804120

Hi, DNS resolution using libresolv (res_nquery) fails in 15.4 when connected to VPN. The same is working fine for 15.3 and lower and this happens for all the domains. The method returns -1 and res->res_h_errno is set to 2. In wireshark we can see that the DNS request is sent and server also returns the response successfully. The same works fine if we use TCP instead of UDP by setting the following option res->options |= RES_USEVC;

Hi there, I am working on an app that configures a PacketTunnelProvider to establish a VPN connection. Unfortunately, while a VPN connection is established, I am unable to update the app via testflight. Downloading other app updates works fine. I noticed that after I receive the alert that updating failed, the vpn badge appears at the top of my screen (the same ux that occurs when the connection is first established). So it's almost like it tried to close the tunnel, and seeing that the app update failed it restablishes the tunnel. I am unsure of why I would not be able to update my app. Maybe stopTunnel is not being called with NEProviderStopReason.appUpdate?

Our product (rockhawk.ca) uses the Multipeer Connectivity framework for peer-to-peer communication between multiple iOS/iPadOS devices. My understanding is that MC framework communicates via three methods: 1) infrastructure wifi (i.e. multiple iOS/iPadOS devices are connected to the same wifi network), 2) peer-to-peer wifi, or 3) Bluetooth. In my experience, I don't believe I've seen MC use Bluetooth. With wifi turned off on the devices, and Bluetooth turned on, no connection is established. With wifi on and Bluetooth off, MC works and I presume either infrastructure wifi (if available) or peer-to-peer wifi are used. I'm trying to overcome two issues: Over time (since iOS 9.x), the radio transmit strength for MC over peer-to-peer wifi has decreased to the point that range is unacceptable for our use case. We need at least 150 feet range. We would like to extend this support to watchOS and the MC framework is not available. Regarding #1, I'd like to confirm that if infrastructure wifi is available, MC uses it. If infrastructure wifi is not available, MC uses peer-to-peer wifi. If this is true, then we can assure our customers that if infrastructure wifi is available at the venue, then with all devices connected to it, range will be adequate. If infrastructure wifi is not available at the venue, perhaps a mobile wifi router (battery operated) could be set up, devices connected to it, then range would be adequate. We are about to test this. Reasonable? Can we be assured that if infrastructure wifi is available, MC uses it? Regarding #2, given we are targeting minimum watchOS 7.0, would the available networking APIs and frameworks be adequate to implement our own equivalent of the MC framework so our app on iOS/iPadOS and watchOS devices could communicate? How much work? Where would I start? I'm new to implementing networking but experienced in using the MC framework. I'm assuming that I would write the networking code to use infrastructure wifi to achieve acceptable range. Many thanks! Tim

Hello all, WWDC 2025 introduced Wi‑Fi Aware (NAN) support on iOS 26 for peer-to-peer discovery and direct connections, but I noticed macOS Tahoe doesn’t include it. I couldn’t find any references to Wi‑Fi Aware APIs or framework support in the macOS SDK. Is Apple planning to bring Wi‑Fi Aware to macOS? If so, will this come in a future update to macOS 26 (e.g., 26.x), or is it deferred to macOS 27 or beyond? Thanks for any insights!

I am trying to connect to an accessory's WiFi network using the below code and I always see the message "connection succeded" even if I provide an incorrect passphrase. I tried with different accessories and see the same behavior. hotspotConfigurationManager.joinAccessoryHotspot(accessory, passphrase: passphrase) { error in if let error = error { print("connection failed: \(error.localizedDescription)") } else { print("connection succeeded") } }