Delve into the world of built-in app and system services available to developers. Discuss leveraging these services to enhance your app's functionality and user experience.

Posts under General subtopic

Post

Replies

Boosts

Views

Activity

Alarm Kit - Sound Repetition
Hello, If I fire an alarm using AlarmKit, using a ringtone that lengths less than 30 seconds, in the last version of iOS (26.0) the sound doesn't repeat. (After about 30 seconds, the sounds stops). BUT in the current version of iOS (26.1), the sound repeats until we slide Stop, thing that I doesn't want. So, is there a way to restore the previous behavior? Or is there a property that can fill this lack? Thank you very much.
0
0
247
Nov ’25
Share Extension not working on macOS Tahoe and Photos App
When my Share Extension receives an image from the macOS Photos app on Tahoe, the NSItemProvider passes a URL to an image file in a temporary location. All attempts to read that file fail silently, such as with NSImage(contentsOfFile) I can see that the file does exist in Finder. This code did work in previous macOS versions. It seems like a permissions issue, but startAccessingSecurityScopedResource had no effect. Other platforms work, other apps work, such as shares from Finder, which shares via data instead of a url. I'm really stuck. Has anyone else run into this? // make sure provider has a conforming item if itemProvider.hasItemConformingToTypeIdentifier(imageType) { do { let data = try await itemProvider.loadItem(forTypeIdentifier: imageType, options: nil) // data may be image NativeImage, Data, or a URL to an image file. // figure out which by casting, then attempt to load uiImage if let image = data as? NativeImage { print("found NativeImage") self.images.append(image) } else if let data = data as? Data { print("found Data") if let image = NativeImage(data: data) { self.images.append(image) } } else if let url = data as? URL{ print("found URL") if let image = NativeImage(contentsOfFile: url.path) { print("loaded from URL") self.images.append(image) } } }catch{ print("⛔️ Share Extension Error: \(error.localizedDescription)") } }
1
0
221
Nov ’25
iOS 17 CarPlay message notification navigating to app instead of announcing messages
After the update to iOS 17, tapping on message notification shown on CarPlay Dashboard is navigating to the CarPlay app instead of announcing the message notification. Announce Notifications turned ON Announce Messages turned ON Announce New Messages option is selected Other apps message notifications are announced as expected when tapping on the notification implying that the settings are set as required. Enabled com.apple.developer.carplay-communication Class CustomCarPlaySceneDelegate: UIResponder, CPTemplateApplicationSceneDelegate { func templateApplicationScene(_ templateApplicationScene: CPTemplateApplicationScene, didConnect interfaceController: CPInterfaceController) func templateApplicationScene(_ templateApplicationScene: CPTemplateApplicationScene, didDisconnectInterfaceController interfaceController: CPInterfaceController) func scene(_ scene: UIScene, willContinueUserActivityWithType userActivityType: String) }
1
0
979
Dec ’25
Can the App Clip banner for full app download be disabled?
Hello, I have a question about the default UI in an App Clip. I know that when App Clip launches, a system banner appears at the top for a few seconds, prompting the user to download the full app from the App Store. I'd like to confirm if this is the standard, default behavior for all App Clips. More importantly, is there any way to disable or hide this banner? We would prefer to manage the prompt to download the full app within our own UI. Thanks in advance for your help!
0
0
67
Nov ’25
App-Site-Association file is wrongly cached
Hi Everyone, When we first hosted our apple-app-site-association file, our hosting provider was unintentionally blocking Apple’s crawler. As a result, Apple’s CDN seems to have cached a timeout / missing file response. We’ve since corrected the issue — the AASA file is now valid and accessible at: https://our-domain.com/.well-known/apple-app-site-association sidenote: I am using "our-domain" as an alias. It is not our actual domain. We have verified that we return a valid JSON, HTTPS 200, correct MIME type. We used apple recommended tools to check this as well as other tools we found on the internet. However, when fetching through the Apple CDN: https://app-site-association.cdn-apple.com/a/v1/our-domain.com we still receive: Apple-Failure-Reason: SWCERR00301 Timeout Apple-Failure-Details: {"cause":"context deadline exceeded (Client.Timeout exceeded while awaiting headers)"} This has persisted for several days. Tools like getuniversal.link and yURL show that the CDN works fine in U.S. regions, but in Europe it continues serving the old timeout response. I’ve already opened a support ticket (Case ID: 102734912696), but the current support channel seems to be general developer account assistance rather than technical. They claim they can only assist us with account related issues (even though I used the code-support form...) Can someone please advise or help us escalate this to the appropriate internal team to refresh the Apple CDN cache for our domain? Thank you so much for your time and help.
1
0
216
Oct ’25
Device Activity monitor extension Not working
anyone has the same problem which is that your device activity extension ain't working even tho all the code work perfectly in the console, I setup it in the right way , tried to make schedule and it did the same exact thing when I tried to create usage threshold. anyone know the reason for this bug? here is my extension code import ManagedSettings import FamilyControls import Foundation import OSLog import UserNotifications class MonitoringExtension: DeviceActivityMonitor { private let defaults = UserDefaults(suiteName: "group.com.William.app") private let logger = Logger(subsystem: "com.William.app", category: "MonitoringExtension") override func eventDidReachThreshold(_ event: DeviceActivityEvent.Name, activity: DeviceActivityName) { let activityRaw = activity.rawValue logger.info("Limite atteinte: \(activityRaw)") scheduleNotification(title: "Limite dépassée", body: "Tu as utilisé trop de temps sur \(activityRaw).") guard let data = defaults?.data(forKey: "\(activityRaw)_selection"), let selection = try? JSONDecoder().decode(FamilyActivitySelection.self, from: data) else { logger.warning("Pas de sélection pour \(activityRaw)") return } let store = ManagedSettingsStore() // ← LE SEUL QUI MARCHE store.shield.applications = selection.applicationTokens if !selection.categoryTokens.isEmpty { store.shield.applicationCategories = .specific(selection.categoryTokens) } logger.info("BLOCAGE ACTIF via ManagedSettingsStore.default") } override func intervalDidEnd(for activity: DeviceActivityName) { super.intervalDidEnd(for: activity) let store = ManagedSettingsStore() store.clearAllSettings() // ← Débloque à minuit logger.info("Restrictions levées à la fin de l'intervalle") } private func scheduleNotification(title: String, body: String) { UNUserNotificationCenter.current().requestAuthorization(options: [.alert, .sound]) { granted, _ in guard granted else { return } let content = UNMutableNotificationContent() content.title = title content.body = body let request = UNNotificationRequest(identifier: UUID().uuidString, content: content, trigger: nil) UNUserNotificationCenter.current().add(request) } } }
0
0
361
Nov ’25
MetricKit Metric Payload Split
In MetricKit, a metric payload comes in with a time range which usually means it contains multiple launches/sessions. How can we relate things that will change between launches or sessions such as pid and lowPowerModeEnabled from the metadata. Will there be multiple payloads for each unique value or is there some other way to use this?
4
0
185
Feb ’26
Non–App Clip NFC URLs show CPSErrorDomain error 2 after creating 50+ Advanced App Clips
We’re seeing unexpected NFC behavior once our app has 50+ Advanced App Clips created. Expected: Scanning an NFC tag with a URL that is NOT an App Clip invocation should show the standard “Open in Safari” notification. Actual: After we create ~50+ Advanced App Clips, scanning NFC tags for URLs on the same domain that are not associated with App Clips consistently shows “CPSErrorDomain error 2” instead of the Safari prompt.
 QR codes for the same non–App Clip URLs work as expected (shows Safari prompt). Clearing the App Clips “Experience Cache” sometimes helps briefly, but the error returns on consequent scans. Notes: Domain has valid AASA. App Clip invocation URLs work as expected.
 The issue appears tied to the number of Advanced App Clips configured. Below ~50, non–App Clip NFC scans behave correctly; above that, they fail.
 Affected across multiple devices and iOS versions tested. Repro steps: Configure 50+ Advanced App Clips for paths on a single domain.
 Encode a different URL on the same domain that is NOT listed as an App Clip invocation into an NFC tag.
 Scan the NFC tag on iPhone.
 Observe “CPSErrorDomain error 2” instead of the “Open in Safari” notification. Impact: blocks our NFC use case for regular web links once we scale App Clip experiences. Sysdiagnose #: FB20563121
0
0
112
Nov ’25
AlarmKit alarm does not fire when device is active
I implemented AlarmKit framework to my app. It works fine when the device's screen is off. but it doesn't fire when the screen is on. No sound, No dynamic Island widget. what's wrong... is this just me? I tried other apps on appstore and they worked fine. maybe is it cause they were built with SwiftUI? I'm a flutter developer. just cause my app is non native could this happen... I'm so frustrated.
1
0
150
Oct ’25
For receiving audio in PushtoTalk, channelManager(_:didActivate:) not called when app receives first push after backgrounding
I'm implementing the PushToTalk framework and have encountered an issue where channelManager(_:didActivate:) is not called under specific circumstances. What works: App is in foreground, receives PTT push → didActivate is called ✅ App receives audio in foreground, then is backgrounded → subsequent pushes trigger didActivate ✅ What doesn't work: App is launched, user joins channel, then immediately backgrounds PTT push arrives while app is backgrounded incomingPushResult is called, I return .activeRemoteParticipant(participant) The system UI shows the speaker name correctly However, didActivate is never called Audio data arrives via WebSocket but cannot be played (no audio session) Setup: Channel joined successfully before backgrounding UIBackgroundModes includes push-to-talk No manual audio session activation (setActive) anywhere in my code AVAudioEngine setup only happens inside didActivate delegate method Issue persists even after channel restoration via channelDescriptor(restoredChannelUUID:) Question: Is this expected behavior or a bug? If expected, what's the correct approach to handle incoming PTT audio when the app is backgrounded and hasn't received audio while in the foreground yet?
6
0
473
Dec ’25
Screen Time API: How to map bundleIdentifier to ApplicationToken for DeviceActivityMonitor when FamilyActivitySelection.Application.bundleIdentifier is nil?
I'm using FamilyActivityPicker to get consent for app/category management, which returns a FamilyActivitySelection object. I serialize this FamilyActivitySelection object (just applicationTokens and categoryTokens) and pass it to my DeviceActivityMonitor extension via App Group UserDefaults. I am using the JSON encoder/decoder over PropertyList (though both seem to exhibit the same behavior). After inspecting the FamilyActivitySelection object immediately after it's returned by FamilyActivityPicker in the main app, the application.bundleIdentifier property is consistently nil for every Application object within selection.applications. Similarly, category.localizedDisplayName is nil for ActivityCategory objects. This happens whether "Select All Apps" is used or if apps/categories are selected individually. I understand that this is the intended behavior due to Apple's user privacy policies. I read on another post that my app can be provided with bundle identifiers and app names within Shield Configuration extensions and Device Activity Report extensions - I'm not sure which ones or how exactly to do this. I am aware that I can use Label(applicationToken) SwiftUI view to display the app name/icon, but this doesn't give programmatic access to the bundleIdentifier string. My app will not log or export these bundleIdentifiers outside of its sandbox. My goal is to create mappings to the FamilyActivitySelection with the publicly accessible bundleIdentifiers. Any guidance, examples, or clarification on the intended workflow for this scenario would be greatly appreciated!
0
0
252
May ’25
Testing TelephonyMessagingKit Outside of The EU
Is it possible to develop for TelephonyMessagingKit on iOS 26 outside of the EU? If so, how is this accomplished? I have added the 'Default Carrier Messaging App' entitlement to my project, but I do not see an option to set my app as a default option in settings on my device. I am not located inside of the EU, but would like to test this functionality.
0
0
119
Dec ’25
How can I open a GPX file in my app with iOS 26 “Files” app?
Hi, I’m trying to open a GPX file (route.gpx) from the Files app on my iPhone using my app (e.g., Aqua Map). Since the latest iOS update (iOS 26), when I long-press the file and tap “Open with…”, my app does not appear in the list anymore. I’ve checked that my app has the correct permissions for Files and Folders. I’m wondering: Is this a user-side issue (Settings on iPhone)? Or does it require developer-side changes in the app (Info.plist / UTI declarations) to make .gpx files appear in “Open with…” or “Share” menus? What is the proper way to make my app appear as an option to open GPX files in Files.app on iOS 26? Thanks in advance!
0
0
147
Oct ’25
Screen Time App Extensions Capabilities
I am building a screen time management app. It has the main app target, and then three extensions - those are the four targets in Xcode. The three extensions are: Shield Device Activity Monitor Device Activity Report Extension I requested "Family Controls (Distribution)" capability from Apple for the main app target / bundle ID, and it got approved. Do I need it for the extensions too? Because previously I had "Family Controls (Development)" for the extensions...
1
0
224
Oct ’25
ShieldConfigurationExtension & SwiftData
Hi, I am developing a Screen Time App and I am having issues with the ShieldConfigurationExtension (ShieldConfigurationDataSource). I know this extensions is sandboxed but I should be able to read data from the main app. I am using SwiftData as my database, but I am unable to initialize it in the extensions with an error indicating insufficient file permissions. I have App Group set up and I am able to share data using UserDefaults but that is just inconvenient. Is there any way I could just open the SwiftData in read only mode so that I could display the user some info on the shield? SwiftData Init: private func setupContainer() throws { let schema = Schema([ DogEntity.self, HouseEntity.self ]) // Use app group container if available let config: ModelConfiguration if let containerURL = FileManager.default.containerURL( forSecurityApplicationGroupIdentifier: "group.\(Bundle.app.bundleIdentifier ?? "")" ) { config = ModelConfiguration(schema: schema, url: containerURL.appendingPathComponent("default.sqlite")) } else { config = ModelConfiguration(schema: schema) } self.container = try ModelContainer(for: schema, configurations: [config]) } Error in extension: fault: Attempt to add read-only file at path file:///private/var/mobile/Containers/Shared/AppGroup/51431199-5919-4AE6-940C-6FE3C53EEB46/default.sqlite read/write. Adding it read-only instead. This will be a hard error in the future; you must specify the NSReadOnlyPersistentStoreOption. error: (3) access permission denied error: Encountered exception error during prepareSQL for SQL string 'SELECT TBL_NAME FROM SQLITE_MASTER WHERE TBL_NAME = 'Z_METADATA'' : access permission denied with userInfo { NSFilePath = "/private/var/mobile/Containers/Shared/AppGroup/51431199-5919-4AE6-940C-6FE3C53EEB46/default.sqlite"; NSSQLiteErrorDomain = 3; } while checking table name from store: <NSSQLiteConnection: 0x154100300> error: Store failed to load. <NSPersistentStoreDescription: 0x15402d590> (type: SQLite, url: file:///private/var/mobile/Containers/Shared/AppGroup/51431199-5919-4AE6-940C-6FE3C53EEB46/default.sqlite) with error = Error Domain=NSCocoaErrorDomain Code=256 "The file “default.sqlite” couldn’t be opened." UserInfo={NSFilePath=/private/var/mobile/Containers/Shared/AppGroup/51431199-5919-4AE6-940C-6FE3C53EEB46/default.sqlite, NSSQLiteErrorDomain=3} with userInfo { NSFilePath = "/private/var/mobile/Containers/Shared/AppGroup/51431199-5919-4AE6-940C-6FE3C53EEB46/default.sqlite"; NSSQLiteErrorDomain = 3; } Any help appreciated 🙂
1
0
196
May ’25
Alarm Kit - Sound Repetition
Hello, If I fire an alarm using AlarmKit, using a ringtone that lengths less than 30 seconds, in the last version of iOS (26.0) the sound doesn't repeat. (After about 30 seconds, the sounds stops). BUT in the current version of iOS (26.1), the sound repeats until we slide Stop, thing that I doesn't want. So, is there a way to restore the previous behavior? Or is there a property that can fill this lack? Thank you very much.
Replies
0
Boosts
0
Views
247
Activity
Nov ’25
Share Extension not working on macOS Tahoe and Photos App
When my Share Extension receives an image from the macOS Photos app on Tahoe, the NSItemProvider passes a URL to an image file in a temporary location. All attempts to read that file fail silently, such as with NSImage(contentsOfFile) I can see that the file does exist in Finder. This code did work in previous macOS versions. It seems like a permissions issue, but startAccessingSecurityScopedResource had no effect. Other platforms work, other apps work, such as shares from Finder, which shares via data instead of a url. I'm really stuck. Has anyone else run into this? // make sure provider has a conforming item if itemProvider.hasItemConformingToTypeIdentifier(imageType) { do { let data = try await itemProvider.loadItem(forTypeIdentifier: imageType, options: nil) // data may be image NativeImage, Data, or a URL to an image file. // figure out which by casting, then attempt to load uiImage if let image = data as? NativeImage { print("found NativeImage") self.images.append(image) } else if let data = data as? Data { print("found Data") if let image = NativeImage(data: data) { self.images.append(image) } } else if let url = data as? URL{ print("found URL") if let image = NativeImage(contentsOfFile: url.path) { print("loaded from URL") self.images.append(image) } } }catch{ print("⛔️ Share Extension Error: \(error.localizedDescription)") } }
Replies
1
Boosts
0
Views
221
Activity
Nov ’25
iOS 17 CarPlay message notification navigating to app instead of announcing messages
After the update to iOS 17, tapping on message notification shown on CarPlay Dashboard is navigating to the CarPlay app instead of announcing the message notification. Announce Notifications turned ON Announce Messages turned ON Announce New Messages option is selected Other apps message notifications are announced as expected when tapping on the notification implying that the settings are set as required. Enabled com.apple.developer.carplay-communication Class CustomCarPlaySceneDelegate: UIResponder, CPTemplateApplicationSceneDelegate { func templateApplicationScene(_ templateApplicationScene: CPTemplateApplicationScene, didConnect interfaceController: CPInterfaceController) func templateApplicationScene(_ templateApplicationScene: CPTemplateApplicationScene, didDisconnectInterfaceController interfaceController: CPInterfaceController) func scene(_ scene: UIScene, willContinueUserActivityWithType userActivityType: String) }
Replies
1
Boosts
0
Views
979
Activity
Dec ’25
Can the App Clip banner for full app download be disabled?
Hello, I have a question about the default UI in an App Clip. I know that when App Clip launches, a system banner appears at the top for a few seconds, prompting the user to download the full app from the App Store. I'd like to confirm if this is the standard, default behavior for all App Clips. More importantly, is there any way to disable or hide this banner? We would prefer to manage the prompt to download the full app within our own UI. Thanks in advance for your help!
Replies
0
Boosts
0
Views
67
Activity
Nov ’25
App-Site-Association file is wrongly cached
Hi Everyone, When we first hosted our apple-app-site-association file, our hosting provider was unintentionally blocking Apple’s crawler. As a result, Apple’s CDN seems to have cached a timeout / missing file response. We’ve since corrected the issue — the AASA file is now valid and accessible at: https://our-domain.com/.well-known/apple-app-site-association sidenote: I am using "our-domain" as an alias. It is not our actual domain. We have verified that we return a valid JSON, HTTPS 200, correct MIME type. We used apple recommended tools to check this as well as other tools we found on the internet. However, when fetching through the Apple CDN: https://app-site-association.cdn-apple.com/a/v1/our-domain.com we still receive: Apple-Failure-Reason: SWCERR00301 Timeout Apple-Failure-Details: {"cause":"context deadline exceeded (Client.Timeout exceeded while awaiting headers)"} This has persisted for several days. Tools like getuniversal.link and yURL show that the CDN works fine in U.S. regions, but in Europe it continues serving the old timeout response. I’ve already opened a support ticket (Case ID: 102734912696), but the current support channel seems to be general developer account assistance rather than technical. They claim they can only assist us with account related issues (even though I used the code-support form...) Can someone please advise or help us escalate this to the appropriate internal team to refresh the Apple CDN cache for our domain? Thank you so much for your time and help.
Replies
1
Boosts
0
Views
216
Activity
Oct ’25
Device Activity monitor extension Not working
anyone has the same problem which is that your device activity extension ain't working even tho all the code work perfectly in the console, I setup it in the right way , tried to make schedule and it did the same exact thing when I tried to create usage threshold. anyone know the reason for this bug? here is my extension code import ManagedSettings import FamilyControls import Foundation import OSLog import UserNotifications class MonitoringExtension: DeviceActivityMonitor { private let defaults = UserDefaults(suiteName: "group.com.William.app") private let logger = Logger(subsystem: "com.William.app", category: "MonitoringExtension") override func eventDidReachThreshold(_ event: DeviceActivityEvent.Name, activity: DeviceActivityName) { let activityRaw = activity.rawValue logger.info("Limite atteinte: \(activityRaw)") scheduleNotification(title: "Limite dépassée", body: "Tu as utilisé trop de temps sur \(activityRaw).") guard let data = defaults?.data(forKey: "\(activityRaw)_selection"), let selection = try? JSONDecoder().decode(FamilyActivitySelection.self, from: data) else { logger.warning("Pas de sélection pour \(activityRaw)") return } let store = ManagedSettingsStore() // ← LE SEUL QUI MARCHE store.shield.applications = selection.applicationTokens if !selection.categoryTokens.isEmpty { store.shield.applicationCategories = .specific(selection.categoryTokens) } logger.info("BLOCAGE ACTIF via ManagedSettingsStore.default") } override func intervalDidEnd(for activity: DeviceActivityName) { super.intervalDidEnd(for: activity) let store = ManagedSettingsStore() store.clearAllSettings() // ← Débloque à minuit logger.info("Restrictions levées à la fin de l'intervalle") } private func scheduleNotification(title: String, body: String) { UNUserNotificationCenter.current().requestAuthorization(options: [.alert, .sound]) { granted, _ in guard granted else { return } let content = UNMutableNotificationContent() content.title = title content.body = body let request = UNNotificationRequest(identifier: UUID().uuidString, content: content, trigger: nil) UNUserNotificationCenter.current().add(request) } } }
Replies
0
Boosts
0
Views
361
Activity
Nov ’25
MetricKit Metric Payload Split
In MetricKit, a metric payload comes in with a time range which usually means it contains multiple launches/sessions. How can we relate things that will change between launches or sessions such as pid and lowPowerModeEnabled from the metadata. Will there be multiple payloads for each unique value or is there some other way to use this?
Replies
4
Boosts
0
Views
185
Activity
Feb ’26
Non–App Clip NFC URLs show CPSErrorDomain error 2 after creating 50+ Advanced App Clips
We’re seeing unexpected NFC behavior once our app has 50+ Advanced App Clips created. Expected: Scanning an NFC tag with a URL that is NOT an App Clip invocation should show the standard “Open in Safari” notification. Actual: After we create ~50+ Advanced App Clips, scanning NFC tags for URLs on the same domain that are not associated with App Clips consistently shows “CPSErrorDomain error 2” instead of the Safari prompt.
 QR codes for the same non–App Clip URLs work as expected (shows Safari prompt). Clearing the App Clips “Experience Cache” sometimes helps briefly, but the error returns on consequent scans. Notes: Domain has valid AASA. App Clip invocation URLs work as expected.
 The issue appears tied to the number of Advanced App Clips configured. Below ~50, non–App Clip NFC scans behave correctly; above that, they fail.
 Affected across multiple devices and iOS versions tested. Repro steps: Configure 50+ Advanced App Clips for paths on a single domain.
 Encode a different URL on the same domain that is NOT listed as an App Clip invocation into an NFC tag.
 Scan the NFC tag on iPhone.
 Observe “CPSErrorDomain error 2” instead of the “Open in Safari” notification. Impact: blocks our NFC use case for regular web links once we scale App Clip experiences. Sysdiagnose #: FB20563121
Replies
0
Boosts
0
Views
112
Activity
Nov ’25
AlarmKit alarm does not fire when device is active
I implemented AlarmKit framework to my app. It works fine when the device's screen is off. but it doesn't fire when the screen is on. No sound, No dynamic Island widget. what's wrong... is this just me? I tried other apps on appstore and they worked fine. maybe is it cause they were built with SwiftUI? I'm a flutter developer. just cause my app is non native could this happen... I'm so frustrated.
Replies
1
Boosts
0
Views
150
Activity
Oct ’25
For receiving audio in PushtoTalk, channelManager(_:didActivate:) not called when app receives first push after backgrounding
I'm implementing the PushToTalk framework and have encountered an issue where channelManager(_:didActivate:) is not called under specific circumstances. What works: App is in foreground, receives PTT push → didActivate is called ✅ App receives audio in foreground, then is backgrounded → subsequent pushes trigger didActivate ✅ What doesn't work: App is launched, user joins channel, then immediately backgrounds PTT push arrives while app is backgrounded incomingPushResult is called, I return .activeRemoteParticipant(participant) The system UI shows the speaker name correctly However, didActivate is never called Audio data arrives via WebSocket but cannot be played (no audio session) Setup: Channel joined successfully before backgrounding UIBackgroundModes includes push-to-talk No manual audio session activation (setActive) anywhere in my code AVAudioEngine setup only happens inside didActivate delegate method Issue persists even after channel restoration via channelDescriptor(restoredChannelUUID:) Question: Is this expected behavior or a bug? If expected, what's the correct approach to handle incoming PTT audio when the app is backgrounded and hasn't received audio while in the foreground yet?
Replies
6
Boosts
0
Views
473
Activity
Dec ’25
Screen Time API: How to map bundleIdentifier to ApplicationToken for DeviceActivityMonitor when FamilyActivitySelection.Application.bundleIdentifier is nil?
I'm using FamilyActivityPicker to get consent for app/category management, which returns a FamilyActivitySelection object. I serialize this FamilyActivitySelection object (just applicationTokens and categoryTokens) and pass it to my DeviceActivityMonitor extension via App Group UserDefaults. I am using the JSON encoder/decoder over PropertyList (though both seem to exhibit the same behavior). After inspecting the FamilyActivitySelection object immediately after it's returned by FamilyActivityPicker in the main app, the application.bundleIdentifier property is consistently nil for every Application object within selection.applications. Similarly, category.localizedDisplayName is nil for ActivityCategory objects. This happens whether "Select All Apps" is used or if apps/categories are selected individually. I understand that this is the intended behavior due to Apple's user privacy policies. I read on another post that my app can be provided with bundle identifiers and app names within Shield Configuration extensions and Device Activity Report extensions - I'm not sure which ones or how exactly to do this. I am aware that I can use Label(applicationToken) SwiftUI view to display the app name/icon, but this doesn't give programmatic access to the bundleIdentifier string. My app will not log or export these bundleIdentifiers outside of its sandbox. My goal is to create mappings to the FamilyActivitySelection with the publicly accessible bundleIdentifiers. Any guidance, examples, or clarification on the intended workflow for this scenario would be greatly appreciated!
Replies
0
Boosts
0
Views
252
Activity
May ’25
Testing TelephonyMessagingKit Outside of The EU
Is it possible to develop for TelephonyMessagingKit on iOS 26 outside of the EU? If so, how is this accomplished? I have added the 'Default Carrier Messaging App' entitlement to my project, but I do not see an option to set my app as a default option in settings on my device. I am not located inside of the EU, but would like to test this functionality.
Replies
0
Boosts
0
Views
119
Activity
Dec ’25
The app crashes on startup in iOS 26
crash.txt
Replies
1
Boosts
0
Views
136
Activity
Oct ’25
How can I open a GPX file in my app with iOS 26 “Files” app?
Hi, I’m trying to open a GPX file (route.gpx) from the Files app on my iPhone using my app (e.g., Aqua Map). Since the latest iOS update (iOS 26), when I long-press the file and tap “Open with…”, my app does not appear in the list anymore. I’ve checked that my app has the correct permissions for Files and Folders. I’m wondering: Is this a user-side issue (Settings on iPhone)? Or does it require developer-side changes in the app (Info.plist / UTI declarations) to make .gpx files appear in “Open with…” or “Share” menus? What is the proper way to make my app appear as an option to open GPX files in Files.app on iOS 26? Thanks in advance!
Replies
0
Boosts
0
Views
147
Activity
Oct ’25
LiveCallerID Lookup
Hi Team, We are currently working on phone number lookup functionality for iOS 18 and have a few queries: When the extension sends a request to our backend server using the PIR encryption process, is the user's phone number visible to our server?
Replies
1
Boosts
0
Views
154
Activity
Jul ’25
Screen Time App Extensions Capabilities
I am building a screen time management app. It has the main app target, and then three extensions - those are the four targets in Xcode. The three extensions are: Shield Device Activity Monitor Device Activity Report Extension I requested "Family Controls (Distribution)" capability from Apple for the main app target / bundle ID, and it got approved. Do I need it for the extensions too? Because previously I had "Family Controls (Development)" for the extensions...
Replies
1
Boosts
0
Views
224
Activity
Oct ’25
Screen time api on Mac?
Is there any way to use the screen time API on Mac?
Replies
0
Boosts
0
Views
103
Activity
Jun ’25
Native Language on the keyboard
Hello, developers! I’m interested in adding my native language and flag to iOS, iPadOS and MacOS. Could you please recommend a solution or provide some valuable advice on how to achieve this? I’d greatly appreciate your assistance. Thanks!
Replies
1
Boosts
0
Views
149
Activity
Oct ’25
ShieldConfigurationExtension & SwiftData
Hi, I am developing a Screen Time App and I am having issues with the ShieldConfigurationExtension (ShieldConfigurationDataSource). I know this extensions is sandboxed but I should be able to read data from the main app. I am using SwiftData as my database, but I am unable to initialize it in the extensions with an error indicating insufficient file permissions. I have App Group set up and I am able to share data using UserDefaults but that is just inconvenient. Is there any way I could just open the SwiftData in read only mode so that I could display the user some info on the shield? SwiftData Init: private func setupContainer() throws { let schema = Schema([ DogEntity.self, HouseEntity.self ]) // Use app group container if available let config: ModelConfiguration if let containerURL = FileManager.default.containerURL( forSecurityApplicationGroupIdentifier: "group.\(Bundle.app.bundleIdentifier ?? "")" ) { config = ModelConfiguration(schema: schema, url: containerURL.appendingPathComponent("default.sqlite")) } else { config = ModelConfiguration(schema: schema) } self.container = try ModelContainer(for: schema, configurations: [config]) } Error in extension: fault: Attempt to add read-only file at path file:///private/var/mobile/Containers/Shared/AppGroup/51431199-5919-4AE6-940C-6FE3C53EEB46/default.sqlite read/write. Adding it read-only instead. This will be a hard error in the future; you must specify the NSReadOnlyPersistentStoreOption. error: (3) access permission denied error: Encountered exception error during prepareSQL for SQL string 'SELECT TBL_NAME FROM SQLITE_MASTER WHERE TBL_NAME = 'Z_METADATA'' : access permission denied with userInfo { NSFilePath = "/private/var/mobile/Containers/Shared/AppGroup/51431199-5919-4AE6-940C-6FE3C53EEB46/default.sqlite"; NSSQLiteErrorDomain = 3; } while checking table name from store: <NSSQLiteConnection: 0x154100300> error: Store failed to load. <NSPersistentStoreDescription: 0x15402d590> (type: SQLite, url: file:///private/var/mobile/Containers/Shared/AppGroup/51431199-5919-4AE6-940C-6FE3C53EEB46/default.sqlite) with error = Error Domain=NSCocoaErrorDomain Code=256 "The file “default.sqlite” couldn’t be opened." UserInfo={NSFilePath=/private/var/mobile/Containers/Shared/AppGroup/51431199-5919-4AE6-940C-6FE3C53EEB46/default.sqlite, NSSQLiteErrorDomain=3} with userInfo { NSFilePath = "/private/var/mobile/Containers/Shared/AppGroup/51431199-5919-4AE6-940C-6FE3C53EEB46/default.sqlite"; NSSQLiteErrorDomain = 3; } Any help appreciated 🙂
Replies
1
Boosts
0
Views
196
Activity
May ’25
FInd My APP issue
find my在添加配件是,持续一直卡在“即将完成设置”这一步.这是由于什么原因呢?而且一直保持很长时间,也不会退出,也不会提示任何错误信息。
Replies
0
Boosts
0
Views
117
Activity
Oct ’25