During our Apple Pay integration testing, we encountered an issue that we're unsure how to resolve. Below are the steps we followed: Created an Apple Pay sandbox test account for Raul and added a test card, following the documentation here: https://developer.apple.com/apple-pay/sandbox-testing/ Opened the Golfmanager platform and initiated a booking. For payment, selected Apple Pay as the method. Raul clicked the Apple Pay button on the Golfmanager UI. He scanned the QR code using his iPhone, logged in with the test account. Apple Pay began validating our merchant identity and retrieved the wallet token to proceed with payment. The Apple Pay payment sheet appeared on Raul's iPhone, showing the card details and the amount requested by Golfmanager. Suddenly, the Apple Pay sheet closed unexpectedly, and we have no insight into what went wrong or what might be missing on our end. Here is the video: https://drive.google.com/file/d/1r-73edQ9eBZzXi6HoSYYGjKO8LbxBrZi/view?usp=drive_web

We are encountering an issue where Apple Pay shows an unexpected popup with a message and an "OK" button when confirming a payment (after double-tapping the power button). This issue began appearing last week without any changes to the codebase or configurations. Steps to Reproduce: Open the app and initiate an Apple Pay payment. Add a valid card if not already present. Confirm the payment using the side button (double-tap). Instead of completing the transaction, a popup appears with a generic message and an "OK" button. Expected Behavior: Apple Pay should process the payment and provide a confirmation or error based on the transaction status. Actual Behavior: A popup appears with a generic title and an “OK” button. The transaction is not processed. Environment Details: Platform: iOS Apple Pay integration has been functioning correctly for years No recent updates to Apple Pay-related code or configuration Configurations Checked: App Identifier is correctly set with the bundle ID Apple Pay Payment Processing is enabled in the App ID configuration Correct Merchant ID is selected and matches in Xcode capabilities *.entitlements file contains correct Apple Pay entitlement Payment Processing Certificates are valid and in place Additional Notes: The issue appeared suddenly without any modifications to the app. We suspect it may be due to external changes (e.g., Apple system update or merchant validation issue). Please advise on any further steps we can take to diagnose or resolve this issue.

Hello everyone. I encountered a problem when integrating Apple Pay. I obtained all the renewal orders through the Apple interface, and their purchaseDate is 8 hours later than the actual payment time. Why is this happening? According to the documentation, the purchaseDate value provided by Apple is a millisecond timestamp that represents the actual payment time of the user, so theoretically there shouldn’t be any timezone issues. This works well in client-initiated subscriptions, but in renewal scenarios, the purchaseDate becomes unreliable. Could this be due to some configuration in the configuration center? For example, I actually received an Apple notification at 1746686911000 (2025-05-08 06:48:31 Etc/GMT). However, the data returned by the Apple interface is as shown below: { "appAccountToken": "xxxx", "bundleId": "xxxx", "currency": "GBP", "environment": "Production", "expiresDate": 1762616831000, "inAppOwnershipType": "PURCHASED", "isUpgraded": false, "offerDiscountType": "", "offerIdentifier": "", "offerType": 0, "originalPurchaseDate": 1746456432000, "originalTransactionId": "320002311698411", "price": 39990, "productId": "xxxx", "purchaseDate": 1746715631000, "quantity": 1, "revocationDate": 0, "revocationReason": 0, "signedDate": 1746687092825, "storefront": "GBR", "storefrontId": "xxxx", "subscriptionGroupIdentifier": "xxxx", "transactionId": "320002315815857", "transactionReason": "RENEWAL", "type": "Auto-Renewable Subscription", "webOrderLineItemId": "320001062124562" } You can see that the purchaseDate is 1746715631000 (2025-05-08 14:48:31 Etc/GMT), which is even later than the current time. Can someone explain this behavior that is inconsistent with the documentation, or did I do something wrong? I would be very grateful for any help anyone can provide.

Hello everyone, I’m currently in the process of implementing Apple Pay on my company’s e-commerce website under a subscription model with recurring payments. I would appreciate some help in clarifying the following points: Is the applicationPrimaryAccountNumber the DPAN and the merchantTokenIdentifier the MPAN? If not, which fields represent each one or how do I recognise them? Is the onlinePaymentCryptogram used only for processing payments with the DPAN, or is it also involved when using the MPAN? Is the onlinePaymentCryptogram single-use or does it have an expiration time? Or is it reusable with no limits? According to Apple’s data policies, is it recommended for our servers to perform the payment token decryption (debundling), or should this only be handled by the payment gateway processor to stay compliant? Below is the payment request I’m using for testing, along with the decrypted payment token returned for a test card: Payment Request: { "countryCode": "US", "currencyCode": "USD", "merchantCapabilities": ["supports3DS", "supportsDebit", "supportsCredit"], "supportedNetworks": ["visa", "masterCard", "amex", "discover"], "requiredBillingContactFields": ["postalAddress", "name"], "lineItems": [ { "label": "Subtotal", "amount": "9" }, { "label": "Taxes", "amount": "1" } ], "total": { "label": "Demo (Card is not charged)", "amount": "10", "type": "final", "recurringPaymentIntervalUnit": "month" }, "recurringPaymentRequest": { "paymentDescription": "Recurring payment", "regularBilling": { "label": "Demo (Card is not charged)", "amount": "10", "type": "final", "paymentTiming": "recurring", "recurringPaymentIntervalUnit": "month" }, "managementURL": "${window.location.origin}/api/managePaymentMethod" } } Decrypted Payment Token: { "applicationPrimaryAccountNumber": "5204240494898922", "applicationExpirationDate": "280630", "currencyCode": "840", "transactionAmount": 0, "deviceManufacturerIdentifier": "050110030273", "paymentDataType": "3DSecure", "paymentData": { "onlinePaymentCryptogram": "MCt5xR+VnQAAAAM/8mUjAAADFIA=" }, "merchantTokenIdentifier": "DM4MMC1US000000042e438d170774669844e732a41c28e97", "merchantTokenMetadata": { "cardMetadata": { "longDescription": "Test Bank for MasterCard MTF", "cardCountry": "US", "shortDescription": "Test Bank 2", "fpanSuffix": "0049" }, "cardArt": [ { "url": "https://nc-crt-smp-device-asset.apple.com:443/broker/v1/assets/174ce63257704d93b00aff8aa09ec0d5", "name": "cardBackgroundCombined@2x.png", "type": "image/png" } ] } } Thanks in advance for your help and guidance.

Apple Sandbox is not available in India, also Apple Pay itself is not supported by Indian Banks. How can I still test using Apple Pay sandbox in India? I am trying to add test cards on my iPhone and it fails to add it. It tries to connect to Issuer, which it should not for sandbox Apple Id. Can anyone help how to achieve this?

Team, We are currently checking out on Apple Pay using ALL and MRU as currencies. We have authorized the payment via Touch ID; however, we are not receiving the onPaymentAuthorized event. Could you please confirm if Apple Pay supports ALL and MRU currencies? We have confirmed that it works with other currencies. Thank you!

I'm encountering an issue with Apple Pay on both Wallet and the Watch app where the app name is not showing up on the back of the payment card(Card details). The pass was successfully provisioned, and everything seems to be working, but the expected app name or brand isn't displayed, and instead, I see the generic "Something went wrong. Try again Later" message. Do we need to configure something to get this displayed in Wallet app?

I've completed the setup required for in-app push provisioning on the iOS platform. Encountering an issue at the completion handler step while sending data back to the PassKit framework. The delegate method used is: func addPaymentPassViewController(completionHandler handler: @escaping (PKAddPaymentPassRequest) -> Void) The error observed is: Error Domain=PKPassKitErrorDomainCode=2 which is PKUnsupportedVersionError The device used for testing is running iOS version 17.4.1.

Hi team, I'm currently trying to add a specific subdomain (with a path) to Apple's Sandbox domain list, but it seems Apple only allows the main domain to be entered. Due to strict client security policies, we aren't allowed to use just the main domain, which is creating a roadblock in our implementation. Is there any way to add a full subdomain or URL path to the Sandbox configuration? I'm happy to join a call to explain the scenario further if that would help. Thanks in advance for your support!

Hello, I am developing an Apple Pay and In-App Provisioning integration for the bank where I work. All entitlements are properly configured, and we are integrated correctly with our Payment Network Operator (PNO). We are using PKAddPaymentPassViewControllerDelegate to handle the provisioning process. The flow progresses as expected up to the Terms and Conditions screen. However, after accepting the terms, the process fails with the message: "Could not add card." Upon checking the device logs using the Wallet profile configuration, I observed the following response from Apple's backend: Response: https://nc-pod10-smp-device.apple.com:443/broker/v4/devices/041315032816900221610987313158566F368A9CEBA1291E/cards/745f792b9d0644e5a6e713d54f505296/enable 500 Time profile: 1.80458 seconds { x-conversation-id = "6ec59a63424f4035915e32f22ea645e4" Vary = "accept-language" Content-Type = "application/json" x-pod = "nc-pod10" x-keystone-correlationid = "E3DD5A5A-FD18-4500-8570-2BD1334E281C" Date = "Thu, 17 Apr 2025 07:05:03 GMT" x-apay-service-response-details = "via_upstream" Content-Length = "49" x-envoy-upstream-service-time = "964" x-pod-region = "paymentpass.com.apple" } { errorCode = 40456; statusCode = 500; } This seems to indicate that the card enablement step is failing on the server side. Our internal systems have not logged any request failure from Apple at this step, which makes it difficult to pinpoint whether the issue is in the PNO integration, entitlement configuration, or something else. We are currently testing in a production environment on a physical device (not using sandbox), and provisioning flows are initiated through our iOS app using PKAddPaymentPassRequest. Could you please help us interpret error code 40456 and identify what steps we should take to resolve this issue? If needed, we can also provide the full device log and additional details. Thank you in advance for your support. Best regards, Mansur Bagwan

Hello, I am setting up a feature for my company's banking app that allows users to add their payment/debit card they have with us to the Apple Wallet on their device. We have the in-app provisioning entitlement setup and configured in the app and configured with our banking partner/TSP. We are able to manually provision production environment cards via the Wallet app. I am using test card data from my TSP. I send them the two certificates, nonce, and nonce signature data and am given activationData, encryptedPassData, and an ephmeralPublicKey that we then set on an instance of PKAddPaymentPassRequest. We call the handler on the delegate method that is called with that request object and get an error: The operation couldn’t be completed. (PKPassKitErrorDomain error 2.) Looking at the PassKit library shows this is PKUnsupportedVersionError - Unsupported pass version. Our TSP hasn't been super helpful in troubleshooting this issue and just said we should contact Apple as it is an Apple error. I am trying to figure out if the issue is with how we are implementing the feature or with the test data itself given to us.

Hello All - I'm attempting to enable my companies app to add credit card to Apple Wallet. Part of our app enables customers to generate new virtual cards on demand and I'm attempting to enable the ability to add these cards to the Apple Wallet. Everything seems to be working all the way to the final stage of the process where I get a PKPassKitErrorDomain systemCancelled and I can't seem to find any clues as to why the system is canceling. For context - I have the com.apple.developer.payment-pass-provisioning entitlement. I have both the Wallet and In-App Provisioning capabilities enabled in the App. I have defined a PKAddPaymentPassViewControllerDelegate class that implements both the generateRequest and didFinishAdding methods. I'm leveraging PKAddPaymentPassViewController in SwiftUI by using a UIViewControllerRepresentable implementing class that returns the view controller properly when makeUIViewController is called. I build a PKAddPaymentPassRequest object and ensure that it is properly filled with encryptedPassData, activationData, and ephemeralPublicKey. As a user I'm able to go to the virtual card view, open the instance of PKAddPaymentPassViewController, select the destination for the card, see the Add Card information. I get to the point where the view tells me it's contacting the card issuer and then I get an error message "Could Not Add Card - Try again later or contact your card issuer for more information" with a "Set Up Later" button. I then get the system canceled error. I should mention that I'm able to add these virtual cards manually via the Apple Wallet. The process works similarly but requires me to provided an OTP to conclude the process. This flow works and I have active cards in my wallet. I'm having a very hard time figuring out how to try and debug this issue further. The only error that the system returns is the system canceled notice. Any insight into where I might be missing something or how to debug the issue further would be greatly appreciated. Any thought on how I could debug this further would also be greatly appreciated. Thanks in advance - AYAL

I am encountering an issue with the in-app provisioning flow using PKAddPaymentPassViewController. Specifically, when presenting the controller to allow users to add a pass to Apple Wallet, the device selection screen is showing all the devices, even after setting the primaryAccountIdentifier on the PKAddPaymentPassRequestConfiguration. Here's the context: I'm using PKAddPaymentPassViewController for in-app provisioning. I provide a valid primaryAccountIdentifier in the configuration. But after adding the pass, if i print back the primaryAccountIdentifier it displays some other value different than the identifier i had set(Example masked identifier: FAPLMC1GB000000066aa4xxxxxxxxxxxa744f16axxxxxxxx). The provisioning flow works, but the device list shown to the user includes all the devices (e.g., Apple Watches and iPhone even though it is already added to Apple Watch or iPhone).

Hello, I am following up on my previous feedback (Feedback ID: FB17175593) regarding the in-app provisioning failure for Apple Pay. In that report, I detailed errors encountered during the card addition process (notably issues related to a missing teamID and cryptographic material errors). Could you please provide an update on the investigation progress? I appreciate your assistance and look forward to your response.

I am working on implementing merchant token notifications. When calling this endpoint https://developer.apple.com/documentation/merchanttokennotificationservices/merchant-token-event-retrieval, the result contains a CardMetadata object with an expirationDate field (see https://developer.apple.com/documentation/merchanttokennotificationservices/cardmetadata). What is the format of this field? The spec only mentions that it has a maximum length of 8 characters.

Is there a way to allow ApplePay to make deferred payments to a suite of stores, or will each store need the user to initially approve a payment manually?

Hello, I'm experiencing an irregular issue with Apple Pay merchant domain verification. As you know, Apple requires domain verification every two months to maintain Apple Pay functionality. The problem is that while the verification sometimes happens automatically without any issues, other times it fails to complete, even though the required file "apple-developer-merchantid-domain-association.txt" is correctly available on our server. When automatic verification fails, the Apple Pay service becomes non-functional on our website, forcing us to perform a manual verification to restore the pending service. Is it normal to encounter such inconsistent automatic verification processes? What could be causing these intermittent verification failures, whereas manual verification always succeed? suggesting this might not be related to IP address restrictions described on the Apple documentation. Thank you in advance,

Apple Pay processed a transaction but the account has insufficient funds. Later the transaction is declined. Is it expected from Apple Pay? Does Apple Pay throws an error if the account has insufficent funds- iOS Swift ? Does anyone know the code to handle this scenario in Swift iOS?

Hi there, is there a way, or a list of test cards, to simulate error on payment in an Apple Pay sandbox environment ? I tried different cards mentioned here but every try was successful : https://developer.apple.com/apple-pay/sandbox-testing/

Hi - I have a question. I am trying to understand when Apple Pay will be available on non-IOS desktop devices (specifically Google Chrome). I was hoping to understand better the process, specifically the following: How can I get the Apple Pay QR code installed on my desktop checkout page on Google Chrome? How long does this process usually take? If I work with Stripe, do I need to get approval from them to install the Apple QR code onto my Google Chrome checkout page? Is this readily available to all merchants (i.e., installing Apple Pay on Google Chrome)/ I have not seen this on any other checkout pages yet. Are there any examples you could point me to of merchants that have installed Apple Pay onto non-IOS desktop so I could trial the process (i.e., a list of existing merchants that have put the QR code onto their Google Chrome checkout pages)?