Hi, I am the developer of this app and I was shared this receipt which strangely does not list my name as the merchant but instead says "The flow network" as you can see below: What is going on?

To perform the integration, it must be done under the same domain that has been validated. Is it not possible to do it in a local environment? Could that be the reason why I can't display the button or complete the validation with the API?

Hello, We are experiencing an issue with Apple Pay integration in our application. We are using WKWebView to handle various payment methods, but we are unable to complete payments via Apple Pay. Upon debugging the WKWebView, we received the following error message: "400 No required SSL certificate was sent" when attempting to process the payment. Currently, we are using a Let's Encrypt SSL certificate. Could you please confirm whether this certificate is suitable for Apple Pay, or if we should be using a different SSL certificate?

We have developed Apple Wallet Extension for our App. The in-app provisioning for the card is working. However when we try to add the card from Wallet extension it gives error saying "Your issuer does not yet offer support for this card". From the apple documentation we can see the issues is same as mentioned in Scenario 2 at following link https://applepaydemo.apple.com/in-app-provisioning#8.4 We are getting eligibilityStatus as 0 Below is the response from Wallet captured using SysDiagnosis https://crt-pod1-smp-device.apple.com:443/broker/v4/devices/0434320BCB1A90022306073796318273728D0A367FA927F4/cards 200 Time profile: 1.77856 seconds { x-conversation-id = ...... Content-Type = "application/json" x-pod = "crt-pod1" x-xss-protection = "1; mode=block" Server = "Apple" x-pod-region = "paymentpass.com.apple" regionbrokerurl = "https://crt-pod1-smp-device.apple.com:443/broker" Date = "Wed, 06 Aug 2025 11:39:30 GMT" Content-Length = "488" x-envoy-upstream-service-time = "1400" Strict-Transport-Security = "max-age=31536000; includeSubdomains" cross-origin-opener-policy = "same-origin" x-keystone-correlationid = ...... x-content-type-options = "nosniff" Vary = "accept-language" x-frame-options = "SAMEORIGIN" } { applicationIdentifier = ......; auxiliaryCapabilities = { }; cardType = 4; deviceProvisioningDataExpected = 1; eligibilityStatus = 0; identifier = ......; learnMoreURL = "https://www.apple.com/ae/apple-pay/banks/ae/en-ae.html"; nonce = ......; paymentApplications = ( { appletTypeIdentifier = Argon; paymentType = Credit; } ); region = "paymentpass.com.apple"; sanitizedPrimaryAccountNumber = 7008; sanitizedPrimaryAccountPrefix = ""; }

we are currently using the requestAutomaticPassPresentationSuppression API in my app. to prevent the Wallet interface from appearing when an NFC/RF reader is detected during active app usage. Recently, a new transit card supporting Express Mode (T-money Transit Card) was released in Korea, and we are seeing an increasing number of users enabling Express Mode. However, this has introduced an issue where users are unable to use the BLE-based functionality we provide via our widget. Specifically, when the user taps our widget, it triggers a BLE signal broadcast for approximately 10 seconds. In this scenario, when the user brings their iPhone close to our reader, Express Mode is activated before the BLE interaction can be established. This prevents the BLE signal from being successfully received and processed. We would like to ask: Is it possible to suppress Express Mode behavior (similar to requestAutomaticPassPresentationSuppression) even when the app is launched via a widget interaction? Alternatively, is there any way to delay or defer Express Mode activation temporarily when launching from a widget or during BLE communication? We would appreciate any guidance or best practices you can share regarding this scenario. Thank you.

We have an Apple Pay account and have successfully created and verified the payment processing certificate in our Apple Developer account. When initiating an Apple Pay payment, the Apple session is created successfully with the correct data return from api , but it is not accepted with the error: “Payment not completed.” The issue occurs even though the merchant validation step works without errors. Our websites where this is happening are: https://magicdeliver.com/ https://www.pulsarmodular.com/ Could you please help us identify the cause of the issue and guide us on resolving it?

During the development of our 3D game project, we encountered high memory usage requirements. To address this, we enabled Apple’s Extended Virtual Addressing (EVA) and Increased Memory Limit services. We have confirmed that both services were enabled in the developer backend as well as in Xcode, and we also used updated development and distribution certificates when building the app. However, in our validation process, it seems that EVA and Increased Memory Limit are not taking effect — the game still experiences memory overflow and crashes. Could you please advise: The correct steps to properly use Extended Virtual Addressing and Increased Memory Limit; How we can confirm whether these services are functioning as expected?

We are an acquirer/payment provider offering Apple Pay. Our merchants use our hosted checkout to accept payments. After a user pays with Apple Pay on our checkout, the Wallet transaction record shows our checkout domain as the payee. We would like it to display the merchant’s brand/name so users can recognize or contact the merchant. Is there any parameter or configuration that controls what Wallet shows as the payee? For example, can this be set via a specific field/parameter, or is it strictly derived from the Merchant ID’s display name (or other Apple Pay configuration)? What is the correct approach for a PSP/acquirer to have the merchant’s brand shown in Wallet transaction record? Additional detail: The field in question is the merchant/payee name shown in the Apple Wallet receipt—directly under the transaction amount at the top of the receipt, and again beneath the “Total” line.

Hi, For one of my projects, I am using the Web Drop-in component of Adyen PSP on a Salesforce B2B Commerce site. One of the payment methods is Apple Pay. The payment method is rendered, but the Apple Pay button is not clickable. We tried debugging it but could not identify the root cause. Could you advise how this issue can be fixed? Thanks

Hi Support, When the applepay express transit option is used on emv payment cards, like this iPhone - Open “Settings” → “Wallet & Apple Pay” → “Express Transit Card”. And a emv single card has been enabled under Express Transit And on transit reader Apple Enhanced contactless Polling support is provided, ( with VAS not supported, user authentciation not supported) Sometimes ATQB response also comes from the iPhone or iWatch instead of the ATQA response, and then it causes the transit reader to report as collision error in the polling. Sequence of the packets: WUPA WUPB ECP frame WUPA WUPB ATQB WUPA ATQA

We are writing to report a recurring stability issue with the Apple Pay sandbox environment. We are using the official sandbox test cards provided on the Apple Developer website for our testing: https://developer.apple.com/apple-pay/sandbox-testing/ We are experiencing frequent, intermittent failures when attempting to add these sandbox cards to the Wallet for testing purposes. The issue typically occurs a couple of times per day. When the failure occurs, the card provisioning process fails unexpectedly. The issue is not limited to a single card; we have observed this behavior across all available card networks. In some instances, all cards (Visa, Mastercard, Discover, Amex) fail to provision simultaneously. At other times, the issue appears to be isolated to specific networks while others work correctly. Crucially, the issue appears to be temporary. After some time passes (ranging from minutes to an hour), we are able to add the exact same card successfully without making any changes to our test environment or configuration. We have diligently checked our setup to rule out configuration errors on our end. This includes verifying: The device is set to a supported region. We are signed in with a valid sandbox tester Apple ID. All other prerequisites for sandbox testing are met. The fact that the process works correctly at other times strongly suggests that this is a server-side stability issue within the Apple Pay sandbox environment rather than a persistent misconfiguration on our part. To help with your investigation, we have attached an image that demonstrates a failed attempt to add a card. Could you please investigate the stability of the sandbox card provisioning service? Please let us know if this is a known issue or if there is any further information we can provide. Thank you for your time and assistance.

We are working with Saferpay. And integrating Applepay Server to Server. But we are having token generation issue. It does not give a valid test card information. We have created a tester account as India country. Is that an issue?

We are experiencing intermittent 403 Forbidden errors during Apple Pay on web merchant validation in our production and sandbox environment. Has anyone else started seeing 403 Forbidden errors recently (since mid-2025)? Why would merchant validation be sometimes successful and sometimes fail with 403? Could this be related to new Apple Pay gateway changes or stricter validation rules? Any additional debug steps or permanent solutions we should try? Thank you.

Hi everyone, I am new to Apply Pay, but I have already implemented IAP for subscriptions in my app. My app also has other functionalities, it also acts as a person-to-person marketplace, as users can post events or online courses which can be bought by other users to participate. My question is that I have read Apple's review guidelines but it is still unclear for me if I can use Apple Pay (with for example Stripe) or do I still need to use IAP for this online content. Also non profit organizations also can register which can recieve donations, can I also use Apple Pay for that or do I still need IAP there, because it would be nice if Apple would take 30% of donations.

Hello, We are currently developing an application that uses the Host-based Card Emulation (HCE) entitlement to enable corporate access functionality. With this entitlement, we have successfully established HCE communication and can interact with our access control systems to unlock doors. Our question is related to improving the user experience: We would like this access functionality to work without requiring the app to be in the foreground, as this adds friction for users during entry. Specifically, we would like to know: Is it possible for our app to coexist with Apple Wallet as the default contactless app, so that: Our app handles NFC interactions for corporate access (e.g., opening doors). Apple Wallet remains the default for payments. If that coexistence is not possible, and our app is set as the default contactless app, Will the system still need to launch our app into the foreground to complete a transaction (e.g., to emulate the NFC card)? Or is there a way to trigger HCE responses in the background (e.g., using a background process or service extension)? Any guidance on how to configure the app for optimal background access behavior, while maintaining compatibility with Wallet, would be greatly appreciated. Thank you in advance.

Hello, We’re seeing an issue where the Apple Pay button is visible in Safari but not clickable for certain users, while it works normally for others. This happens on our site (https://store-qa2.enphase.com/ ) as well as on other sites for the same affected users. Currently, we display the Apple Pay button based on the following condition: Boolean(window.ApplePaySession) && ApplePaySession.canMakePayments(); For affected users, the button shows up as expected, but it’s not interactive. All users (both affected and unaffected) are on the latest versions of Safari and macOS/iOS. Could someone clarify what additional conditions Safari/Apple Pay requires for the button to be fully functional? And under what circumstances could it be visible but not clickable?

Hi, we are implementing the push provisioning via the Apple Wallet Extension starting from the example at https://developer.apple.com/documentation/passkit/implementing-wallet-extensions. To correctly manage the push provisioning on Apple Watch, specifically for a card tokenised in the iPhone but not in the Watch, we need to know if there is a connected Apple Watch to the iPhone. We are using the following code from the Apple Wallet Extension example to detect whether there is a connected watch: WCSession* session = [WCSession defaultSession]; session.delegate = delegate; [session activateSession]; In the main target of the app, at the end of the activation the system correctly calls the delegate method: session:activationDidCompleteWithState:error: but we noticed it is not being called in the UI extension context (the one having NSExtensionPointIdentifier: com.apple.PassKit.issuer-provisioning.authorization). We don't understand why the delegate is not being called in the UI extension, can you please help? Thanks! Steps to Reproduce: Start with a card not added in the Apple Wallet app Open the Apple Wallet app Click on add card Select the app to launch the Wallet Extension flow The Apple Wallet Extension with UI is on screen and invokes the activateSession method, the delegate method is not invoked and session.isPaired returns "no". Xcode Version 16.2 macOS Version 15.6.1 (24G90) Feedback ID FB20082564

Hello, I am currently testing an Adyen integration with Sylius and need to verify Apple Pay with Cartes Bancaires in the sandbox environment. Could you please advise how Cartes Bancaires can be tested in Apple Pay Sandbox (e.g. cards details)? Thank you in advance for your guidance. Best regards, Grzegorz

Hello, We are working on integrating billing into our dating app, targeted at the Russian market. Our main requirement is to support subscriptions with automatic renewal and cancellation. We understand that, according to App Store Review Guideline, all digital subscriptions should use Apple In-App Purchase (IAP). However, we are unsure how this applies in Russia, where some local regulations may limit the use of non-Russian payment processors, and where not all Russian bank cards are accepted by Apple. Our question is: -For iOS apps in Russia, is it strictly required to use Apple IAP for subscriptions? -Are there any approved exceptions allowing integration with local processors such as Robokassa or YooKassa? -How are other developers currently handling subscriptions for the Russian market? We want to ensure full compliance and avoid any risk of rejection or removal. Thank you in advance for any clarification. Best regards, Dan

We are working with a large fintech org on project connected with provisioning payment cards to Apple Wallet. When we add a previously provisioned card to the Wallet (using the Wallet UI, Add card -> Previous card). It adds the card on one device showing the Express Travel card screen after the card is added allowing the user to set the card as an express travel card during the provisioning flow but never on our other devices. All of the test devices are clean and have only the same single card provisioned. What triggers the Express Travel Card screen to be shown during the add previous card flow? (Why is it showing on one device and not another).