We’re trying to build a custom player for Unity. For this, we’re using AVPlayer with AVPlayerItemVideoOutput to get textures. However, we noticed that playback is not smooth and the stream often freezes. For testing, we used this 8K video: https://deovr.com/nwfnq1 The video was played using the following code: @objc public func playVideo(urlString: String) { guard let url = URL(string: urlString) else { return } let pItem = AVPlayerItem(url: url) playerItem = pItem pItem.preferredForwardBufferDuration = 10.0 let pixelBufferAttributes: [String: Any] = [ kCVPixelBufferPixelFormatTypeKey as String: kCVPixelFormatType_420YpCbCr8BiPlanarVideoRange, kCVPixelBufferMetalCompatibilityKey as String: true, ] let output = AVPlayerItemVideoOutput( pixelBufferAttributes: pixelBufferAttributes ) pItem.add(output) playerItemObserver = pItem.observe(\.status) { [weak self] pItem, _ in guard pItem.status == .readyToPlay else { return } self?.playerItemObserver = nil self?.player.play() } player = AVPlayer(playerItem: pItem) player.currentItem?.preferredPeakBitRate = 35_000_000 } When AVPlayerItemVideoOutput is attached, the video stutters and the log looks like this: 🟢 Playback likely to keep up 🟡 Buffer ahead: 4.08s | buffer: 4.08s 🟡 Buffer ahead: 4.08s | buffer: 4.08s 🟡 Buffer ahead: -0.07s | buffer: 0.00s 🟡 Buffer ahead: 2.94s | buffer: 3.49s 🟡 Buffer ahead: 2.50s | buffer: 4.06s 🟡 Buffer ahead: 1.74s | buffer: 4.30s 🟡 Buffer ahead: 0.74s | buffer: 4.30s 🟠 Playback may stall 🛑 Buffer empty 🟡 Buffer ahead: 0.09s | buffer: 4.30s 🟠 Playback may stall 🟠 Playback may stall 🛑 Buffer empty 🟠 Playback may stall 🟣 Buffer full 🟡 Buffer ahead: 1.41s | buffer: 1.43s 🟡 Buffer ahead: 1.41s | buffer: 1.43s 🟡 Buffer ahead: 1.07s | buffer: 1.43s 🟣 Buffer full 🟡 Buffer ahead: 0.47s | buffer: 1.65s 🟠 Playback may stall 🛑 Buffer empty 🟡 Buffer ahead: 0.10s | buffer: 1.65s 🟠 Playback may stall 🟡 Buffer ahead: 1.99s | buffer: 2.03s 🟡 Buffer ahead: 1.99s | buffer: 2.03s 🟣 Buffer full 🟣 Buffer full 🟡 Buffer ahead: 1.41s | buffer: 2.00s 🟡 Buffer ahead: 0.68s | buffer: 2.27s 🟡 Buffer ahead: 0.09s | buffer: 2.27s 🟠 Playback may stall 🛑 Buffer empty 🟠 Playback may stall When we remove AVPlayerItemVideoOutput from the player, the video plays smoothly, and the output looks like this: 🟢 Playback likely to keep up 🟡 Buffer ahead: 1.94s | buffer: 1.94s 🟡 Buffer ahead: 1.94s | buffer: 1.94s 🟡 Buffer ahead: 1.22s | buffer: 2.22s 🟡 Buffer ahead: 1.05s | buffer: 3.05s 🟡 Buffer ahead: 1.12s | buffer: 4.12s 🟡 Buffer ahead: 1.18s | buffer: 5.18s 🟡 Buffer ahead: 0.72s | buffer: 5.72s 🟡 Buffer ahead: 1.27s | buffer: 7.28s 🟡 Buffer ahead: 2.09s | buffer: 3.03s 🟡 Buffer ahead: 4.16s | buffer: 6.10s 🟡 Buffer ahead: 6.66s | buffer: 7.09s 🟡 Buffer ahead: 5.66s | buffer: 7.09s 🟡 Buffer ahead: 4.66s | buffer: 7.09s 🟡 Buffer ahead: 4.02s | buffer: 7.45s 🟡 Buffer ahead: 3.62s | buffer: 8.05s 🟡 Buffer ahead: 2.62s | buffer: 8.05s 🟡 Buffer ahead: 2.49s | buffer: 3.53s 🟡 Buffer ahead: 2.43s | buffer: 3.38s 🟡 Buffer ahead: 1.90s | buffer: 3.85s We’ve tried different attribute settings for AVPlayerItemVideoOutput. We also removed all logic related to reading frame data, but the choppy playback still remained. Can you advise whether this is a player issue or if we’re doing something wrong?

Hi, When viewing a spatial photo scene on the Apple Vision Pro Photos app, you can tap on the immersive icon on the top right corner to transaction from the window presenting the image as spatial3d to an immersive photo scene with spatial3DImmersive where the window borders disappear. Could someone explain how to achieve that? I tried to do it but once I transition from spatial3d to spatial3DImmersive I can see still see a rectangle around the spatial image. Thanks.

One of the most common ways to provide a window size in visionOS is to use the defaultSize scene modifier. WindowGroup(id: "someID") { SomeView() } .defaultSize(CGSize(width: 600, height: 600)) Starting in visionOS 26, using this has a side effect. visionOS 26 will restore windows that have been locked in place or snapped to surfaces. If a user has manually adjusted the size of a locked/snapped window, the users size is only restore in some cases. Manual resize respected Leaving a room and returning later Taking the headset off and putting it back on later Manual resize NOT respected Device restart. In this case, the window is reopened where it was locked, but the size is set back to the values passed to defaultSize. The manual resizing adjustments the user has made are lost. This is counter to how all other windows and widgets work. I reported this last month (FB18429638), but haven't heard back if this is a bug or intended behavior. Questions What is the best way to provide a default window size that will only be used when opening new windows–and not used during scene restoration? Should we try to keep track of window size after users adjust them and save that somewhere? If this is intended behavior, can someone please update the docs accordingly?

Hi everyone, I’m building a visualization app for VisionPro that uses SharePlay and GroupActivities to explore datasets collaboratively. I’ve successfully implemented the new SharedWorldAnchor feature, and everything works well with nearby, local participants. However, I’m stuck on one point: How can I share a world anchor with remote participants who join via FaceTime as spatial personas? Apple’s demo app (where multiple users move a plane model around) seems to suggest that this is possible. For context, I’m building an immersive app with Metal rendering. Any guidance or examples would be greatly appreciated! Thanks, Jens

I am working on an app that will allow a user to load and share their model files (usdz, usda, usdc). I'm looking at security options to prevent bad actors. Are there security or validation methods built into ARKit/RealityKit/CloudKit when loading models or saving them on the cloud? I want to ensure no one can inject any sort of exploit through these file types.

Has anyone had success with MeshInstancesComponent? I tried to follow the sample code from What's New in RealityKit but it wouldn't compile. I was able to use one of the init overloads to get it to compile, but using it crashes both my device and the simulator. Even with one instance.

Hi, I'm currently implementing 180° / 360° property for immersive video in my app. I was able to implement 360° easily by just giving VideoMaterial to flipped sphere. However, I'm bit stuck at 180°. I want to implement by setting VideoMaterial to hemisphere mesh. But since RealityKit doesn't provide default function such like MeshResource.generateHemisphere yet, I just want to apply VideoMaterial half front visible, and half back transparent. I thought this would make my sphere looks like hemisphere. But I can't find my way to implement this method.. I would appreciate any advice / idea / information that might help.

The initial startup of visionOS 26 after install is glacially slow.

Hello everyone, I am currently developing an experience for visionOS using RealityKit and I would like to achieve volumetric light effects, such as visible light rays or shafts through fog or dust. I found this GitHub project: https://github.com/robcupisz/LightShafts, which demonstrates the kind of visual style I am aiming for. I would like to know if there is a way to create similar effects using RealityKit on visionOS. So far, I have experimented with DirectionalLight, SpotLight, ImageBasedLight, and custom materials (e.g., additive blending on translucent meshes), but none of these approaches can replicate the volumetric light shaft look shown in the repository above. Questions: Is there a recommended technique or workaround in RealityKit to simulate light shafts or volumetric lighting? Is creating a custom mesh (e.g., cone or volume geometry with gradient alpha and additive blending) the only feasible method? Are there any examples, best practices, or sample projects from Apple or other developers that showcase a similar visual style? Any advice or hints would be greatly appreciated. Thank you in advance!

Are there any changes to RotationSystem: System and RotationComponent: Component that I should be aware of to see if I need to update my use in my visionOS app?

I am creating a vision pro app with a 3D model, it has a mesh hierarchy of head, hands, feet etc. I want the character to look towards the camera, but am not able to access head of character through sceneKit nor reality kit. when I try to print names of the child meshes, it only prints till the character, it does iterate through all the body parts. Can anyone help?

On Xcode 26 and visionOS 26, apple provides observable property for Entity, so we can easily interact with Entity between RealityScene and SwiftUI, but there is a issue: It's fine to observe Entity's position and scale properties in Slider, but can't observe orientation properties in Slider. MacBook Air M2 / Xcode 26 beta6

Hello all, I saw this interesting VisionOS app: https://apps.apple.com/us/app/splitscreen-multi-display/id6478007837 I was wondering if there was any documentation on the Swift APIs that were used to create this app.

Hello, In my project, I have attached a ManipulationComponent to Entity A and as expected, I'm able interact with it using the built-in gestures. I have another Entity B which is a child of A that I would like to interact with as well, so I attempted to add a ManipulationComponent to B. However, no gestures seem to be registered on B; I can still interact with A but B cannot be interacted with despite having ManipulationComponents on both entities. So I'm wondering if I'm just doing something wrong, if this is an issue with the ManipulationComponent, or if this is a limitation of the API. Attached is the code used to add the ManipulationComponent to an Entity and it was done on both A and B: let mc = ManipulationComponent() model.components.set(mc) var boxShape = ShapeResource.generateBox(width: 0.25, height: 0.05, depth: 0.25) boxShape = boxShape.offsetBy(translation: simd_float3(0, -0.05, -0.25)) ManipulationComponent.configureEntity(model, collisionShapes: [boxShape]) if var mc = model.components[ManipulationComponent.self] { mc.releaseBehavior = .stay mc.dynamics.inertia = .low model.components.set(mc) } I am using visionOS 26.0; let me know if there's any additional information needed.

I have an entity that was created using Mixamo, and it has an animation. after the animation completes the mesh of the robot is not where the entity is positioned. I want to do something like when the animation finishes, I set the root entity's transform to the mesh's transform. There are no transformations applied to any of the children of this root of the model, which means that the transformations are applied to the skeleton due the the playing of animations. Is there a way where I can apply the final position of the root of the skeleton to the root entity to make sure to position the entity where the animation has ended just before the next animation plays?

Hello, I've pre-ordered the Logitech Muse with hopes of developing with it, but have yet to find any documentation relating to the capabilities it will have/any APIs that will be available to take advantage of the Muse. Is anyone aware of what might become available? Thank you in advance.

Hello since updating to beta 3 the sculpting sample app doesn't work it crashes on running. seems to be something in AnchorEntity or AccessoryAnchoringSource Referenced from: <00B81486-1A74-30A0-B75B-4B39E3AF57DF> /private/var/containers/Bundle/Application/3D2EBF59-19F0-4BF4-8567-6962AA36A2C6/delete.app/delete.debug.dylib Expected in: <BAA9B221-78A1-3B99-AA2F-B8DFCD179FC7> /System/Library/Frameworks/RealityFoundation.framework/RealityFoundation

Hi. I am mixing content destined for Vision Pro. Locked to video. I have the AAX installer and the ASAF video player demonstrated in the quicktimes is nit included in the install package for pro tools. Would it be possible to post a link ?

How can I request access to Enterprise API for VisionPro with an individual developer account? I wanted it for learning and testing

After adding TextComponents to my Entities on visionOS, I have observed that visualBounds will ignore the TextComponents. Documentation states that it should render a rounded rectangle mesh. These mashes are visible on the device, but not visible in the debugger ("Capture Entity Hierarchy") and ignored by visualBounds. Am I missing something? static func makeDirection(_ direction: Direction) -> Entity { let text = Entity() text.name = direction.rawValue text.setScale(SIMD3(repeating: 5), relativeTo: nil) text.transform.rotation = direction.rotation text.components.set(direction.textComponent) return text } My workaround is to add a disabled ModelEntity and take its bounds 😬