Prioritize user privacy and data security in your app. Discuss best practices for data handling, user consent, and security measures to protect user information.

All subtopics
Posts under Privacy & Security topic

Post

Replies

Boosts

Views

Activity

Emails sents through relay addresses go to spam
Hello, I’m experiencing an issue with email deliverability when sending messages through Apple’s private email relay service. Our app uses “Sign in with Apple” and sends communication emails to users through relay addresses . Messages are successfully delivered but are consistently being placed in users’ spam or junk folders. Configuration summary: Domain: myapp.example Mail server: OVH SMTP SPF and DKIM: Active and validated Domain and sender registered under “Sign in with Apple for Email Communication” Messages pass SPF and DKIM checks successfully, but emails relayed by Apple’s private service are still being marked as spam. Could anyone confirm if there are additional steps or configurations required to improve deliverability (e.g., DMARC alignment or specific header requirements)? Thank you for your help!
1
0
236
Nov ’25
Migrating App ID prefix to Team ID
My existing iOS app has a legacy App ID prefix which does not match my Team ID. I am planning on migrating it to my Team ID. I am aware of the potential issues with keychain access groups, however I wanted to double check that there are no issues related to "Sign in with Apple". My app is currently the "Primary App ID" in the "Sign in with Apple" settings. The full App ID is listed there, including the prefix. Can someone from the relevant team at Apple confirm that changing the App ID prefix to Team ID has no effect related to "Sign in with Apple"?
1
0
232
Nov ’25
[App Attest] DNS resolution failure for attest.apple.com / development.apple.com
Hello, We are working on integrating app integrity verification into our service application, following Apple's App Attest and DeviceCheck guide. Our server issues a challenge to the client, which then sends the challenge, attestation, and keyId in CBOR format to Apple's App Attest server for verification. However, we are unable to reach both https://attest.apple.com and https://attest.development.apple.com due to network issues. These attempts have been made from both our internal corporate network and mobile hotspot environments. Despite adjusting DNS settings and other configurations, the issue persists. Are there alternative methods or solutions to address this problem? Any recommended network configurations or guidelines to successfully connect to Apple's App Attest servers would be greatly appreciated. Thank you.
2
0
177
May ’25
ASPasswordCredential Returns a Blank Password with Apple Password App
Using the simplified sign-in with tvOS and a third party password manager, I receive a complete ASPasswordCredential, and I can easily log into my app. When I do the same thing but with Apple's password manager as the source, I receive an ASPasswordCredential that includes the email address, but the password is an empty string. I have tried deleting the credentials from Apple Passwords and regenerating them with a new login to the app's website. I have tried restarting my iPhone. Is this the expected behavior? How should I be getting a password from Apple's Password app with an ASAuthorizationPasswordRequest?
2
0
306
Aug ’25
Keychain is not getting opened after unlock when system.login.screensaver is updated to use authenticate-session-owner-or-admin
When we enable 3rd party authentication plugin using SFAuthorization window, then when user performs Lock Screen and then unlock the MAC. Now after unlock, if user tries to open Keychain Access, it is not getting opened. When trying to open Keychain Access, we are prompted for credentials but after providing the credentials Keychians are not getting opened. This is working on Sonoma 14.6.1 , but seeing this issue from macOS Sequoia onwards. Are there any suggested settings/actions to resolve this issue?
6
0
456
Aug ’25
Private Access Tokens - Documentation?
I cannot find any reference to this within the Apple developer documents (or certainly searching for multiple possible keywords yields no results). The only reference I can find is to documents written in support of its announcement in 2002: https://developer.apple.com/news/?id=huqjyh7k. Is there any further documentation on implementing or has the capability been deprecated?
1
0
424
Nov ’25
Unable to enable "Sign In with Apple" on Service ID – 501 PATCH Unsupported Request
Hello, I’m trying to set up Sign In with Apple for my Firebase Authentication integration. Steps I followed: Created a Service ID in Apple Developer, e.g. com.example.myapp.signin. Tried to enable Sign In with Apple and configure the Web Authentication Configuration. Web Domain: myapp.firebaseapp.com Return URL: https://myapp.firebaseapp.com/__/auth/handler When I click Save, I get the following error in the browser console and a blank response page: Unsupported Request PATCH to http://developer.apple.com/services-account/v1/bundleIds/XXXXXXXX not supported. Reference #... What I have verified so far: My Apple Developer Program membership is active (paid). My App ID (e.g. com.example.myapp) exists in Identifiers. The App ID has Sign In with Apple capability checked. I need to link the Service ID with this App ID for Firebase web-based auth. Goal: Complete setup of Apple as a sign-in provider in Firebase Authentication. To do this, Apple requires me to add the Firebase return URL above, but the Developer Portal prevents saving with the 501 error. Has anyone else run into this, and is there a workaround (e.g. enabling via Xcode, App Store Connect, or other methods)? Is this a known bug with the Apple Developer Portal? Here is the screenshot of the error: And Response part: Thanks in advance!
2
0
457
Aug ’25
Creating machine identifier to be used by daemon based app
I am developing a daemon-based product that needs a cryptographic, non-spoofable proof of machine identity so a remote management server can grant permissions based on the physical machine. I was thinking to create a signing key in the Secure Enclave and use a certificate signed by that key as the machine identity. The problem is that the Secure Enclave key I can create is only accessible from user context, while my product runs as a system daemon and must not rely on user processes or launchAgents. Could you please advise on the recommended Apple-supported approaches for this use case ? Specifically, Is there a supported way for a system daemon to generate and use an unremovable Secure Enclave key during phases like the pre-logon, that doesn't have non user context (only the my application which created this key/certificate will have permission to use/delete it) If Secure Enclave access from a daemon is not supported, what Apple-recommended alternatives exist for providing a hardware-backed machine identity for system daemons? I'd rather avoid using system keychain, as its contents may be removed or used by root privileged users. The ideal solution would be that each Apple product, would come out with a non removable signing certificate, that represent the machine itself (lets say that the cetificate name use to represent the machine ID), and can be validated by verify that the root signer is "Apple Root CA"
3
0
614
Nov ’25
mTLS : Guidance on Generating SecIdentity with Existing Private Key and Certificate
Hello, I am currently working on iOS application development using Swift, targeting iOS 17 and above, and need to implement mTLS for network connections. In the registration API flow, the app generates a private key and CSR on the device, sends the CSR to the server (via the registration API), and receives back the signed client certificate (CRT) along with the intermediate/CA certificate. These certificates are then imported on the device. The challenge I am facing is pairing the received CRT with the previously generated private key in order to create a SecIdentity. Could you please suggest the correct approach to generate a SecIdentity in this scenario? If there are any sample code snippets, WWDC videos, or documentation references available, I would greatly appreciate it if you could share them. Thank you for your guidance.
4
0
234
Aug ’25
SFCertificateView Memory Leak
I've been spending days trying to solve the memory leak in a small menu bar application I've wrote (SC Menu). I've used Instruments which shows the leaks and memory graph which shows unreleased allocations. This occurs when someone views a certificate on the smartcard. Basically it opens a new window and displays the certificate, the same way Keychain Access displays a certificate. Whenever I create an SFCertificateView instance and set setDetailsDisclosed(true) - a memory leak happens. Instruments highlights that line. import Cocoa import SecurityInterface class ViewCertsViewController: NSViewController { var selectedCert: SecIdentity? = nil override func viewDidLoad() { super.viewDidLoad() self.view = NSView(frame: NSRect(x: 0, y: 0, width: 500, height: 500)) self.view.wantsLayer = true var secRef: SecCertificate? = nil guard let selectedCert else { return } let certRefErr = SecIdentityCopyCertificate(selectedCert, &secRef) if certRefErr != errSecSuccess { os_log("Error getting certificate from identity: %{public}@", log: OSLog.default, type: .error, String(describing: certRefErr)) return } let scrollView = NSScrollView() scrollView.translatesAutoresizingMaskIntoConstraints = false scrollView.borderType = .lineBorder scrollView.hasHorizontalScroller = true scrollView.hasVerticalScroller = true let certView = SFCertificateView() guard let secRef = secRef else { return } certView.setCertificate(secRef) certView.setDetailsDisclosed(true) certView.setDisplayTrust(true) certView.setEditableTrust(true) certView.setDisplayDetails(true) certView.setPolicies(SecPolicyCreateBasicX509()) certView.translatesAutoresizingMaskIntoConstraints = false scrollView.documentView = certView view.addSubview(scrollView) // Layout constraints NSLayoutConstraint.activate([ scrollView.leadingAnchor.constraint(equalTo: view.leadingAnchor), scrollView.trailingAnchor.constraint(equalTo: view.trailingAnchor), scrollView.topAnchor.constraint(equalTo: view.topAnchor), scrollView.bottomAnchor.constraint(equalTo: view.bottomAnchor), // Provide certificate view a width and height constraint certView.widthAnchor.constraint(equalTo: scrollView.widthAnchor), certView.heightAnchor.constraint(greaterThanOrEqualToConstant: 500) ]) } } https://github.com/boberito/sc_menu/blob/dev_2.0/smartcard_menu/ViewCertsViewController.swift Fairly simple.
2
0
575
Oct ’25
Request for manual on interpreting Security Authorization Plugin authentication failure codes
Using the SDK, I've printed out some log messages when I enter the wrong password: 2025-08-20 15:58:14.086 Db SecurityAgentHelper-arm64[818:1efd] [com.example.apple-samplecode.LoggingAuthPlugin:mechanism] invoke 2025-08-20 15:58:14.086 Db SecurityAgentHelper-arm64[818:1efd] [com.example.apple-samplecode.LoggingAuthPlugin:mechanism] general: 2025-08-20 15:58:14.086 Db SecurityAgentHelper-arm64[818:1efd] [com.example.apple-samplecode.LoggingAuthPlugin:mechanism] progname: 'SecurityAgentHelper-arm64' 2025-08-20 15:58:14.086 Db SecurityAgentHelper-arm64[818:1efd] [com.example.apple-samplecode.LoggingAuthPlugin:mechanism] OS version: 'Version 15.5 (Build 24F74)' 2025-08-20 15:58:14.086 Db SecurityAgentHelper-arm64[818:1efd] [com.example.apple-samplecode.LoggingAuthPlugin:mechanism] pid: '818' 2025-08-20 15:58:14.086 Db SecurityAgentHelper-arm64[818:1efd] [com.example.apple-samplecode.LoggingAuthPlugin:mechanism] ppid: '1' 2025-08-20 15:58:14.086 Db SecurityAgentHelper-arm64[818:1efd] [com.example.apple-samplecode.LoggingAuthPlugin:mechanism] euid: '92' 2025-08-20 15:58:14.086 Db SecurityAgentHelper-arm64[818:1efd] [com.example.apple-samplecode.LoggingAuthPlugin:mechanism] uid: '92' 2025-08-20 15:58:14.087 Db SecurityAgentHelper-arm64[818:1efd] [com.example.apple-samplecode.LoggingAuthPlugin:mechanism] session: 0x186e9 2025-08-20 15:58:14.087 Db SecurityAgentHelper-arm64[818:1efd] [com.example.apple-samplecode.LoggingAuthPlugin:mechanism] attributes: 2025-08-20 15:58:14.087 Db SecurityAgentHelper-arm64[818:1efd] [com.example.apple-samplecode.LoggingAuthPlugin:mechanism] is root: f 2025-08-20 15:58:14.087 Db SecurityAgentHelper-arm64[818:1efd] [com.example.apple-samplecode.LoggingAuthPlugin:mechanism] has graphics: t 2025-08-20 15:58:14.087 Db SecurityAgentHelper-arm64[818:1efd] [com.example.apple-samplecode.LoggingAuthPlugin:mechanism] has TTY: t 2025-08-20 15:58:14.087 Db SecurityAgentHelper-arm64[818:1efd] [com.example.apple-samplecode.LoggingAuthPlugin:mechanism] is remote: f 2025-08-20 15:58:14.087 Db SecurityAgentHelper-arm64[818:1efd] [com.example.apple-samplecode.LoggingAuthPlugin:mechanism] auth session: 0x0 2025-08-20 15:58:14.087 Db SecurityAgentHelper-arm64[818:1efd] [com.example.apple-samplecode.LoggingAuthPlugin:mechanism] context: 2025-08-20 15:58:14.088 Db SecurityAgentHelper-arm64[818:1efd] [com.example.apple-samplecode.LoggingAuthPlugin:mechanism] authentication-failure: --S -14090 2025-08-20 15:58:14.088 Db SecurityAgentHelper-arm64[818:1efd] [com.example.apple-samplecode.LoggingAuthPlugin:mechanism] pam_result: X-S 9 2025-08-20 15:58:14.089 Db SecurityAgentHelper-arm64[818:1efd] [com.example.apple-samplecode.LoggingAuthPlugin:mechanism] hints: 2025-08-20 15:58:14.089 Db SecurityAgentHelper-arm64[818:1efd] [com.example.apple-samplecode.LoggingAuthPlugin:mechanism] authorize-right: "system.login.console" 2025-08-20 15:58:14.090 Db SecurityAgentHelper-arm64[818:1efd] [com.example.apple-samplecode.LoggingAuthPlugin:mechanism] client-path: "/System/Library/CoreServices/loginwindow.app" 2025-08-20 15:58:14.090 Db SecurityAgentHelper-arm64[818:1efd] [com.example.apple-samplecode.LoggingAuthPlugin:mechanism] client-pid: 807 2025-08-20 15:58:14.090 Db SecurityAgentHelper-arm64[818:1efd] [com.example.apple-samplecode.LoggingAuthPlugin:mechanism] client-type: 'LDNB' 2025-08-20 15:58:14.090 Db SecurityAgentHelper-arm64[818:1efd] [com.example.apple-samplecode.LoggingAuthPlugin:mechanism] client-uid: 0 2025-08-20 15:58:14.090 Db SecurityAgentHelper-arm64[818:1efd] [com.example.apple-samplecode.LoggingAuthPlugin:mechanism] creator-audit-token: 2025-08-20 15:58:14.090 Db SecurityAgentHelper-arm64[818:1efd] [com.example.apple-samplecode.LoggingAuthPlugin:mechanism] ff ff ff ff 00 00 00 00 00 00 00 00 00 00 00 00 ................ 2025-08-20 15:58:14.090 Db SecurityAgentHelper-arm64[818:1efd] [com.example.apple-samplecode.LoggingAuthPlugin:mechanism] 00 00 00 00 27 03 00 00 e9 86 01 00 68 08 00 00 ....'.......h... 2025-08-20 15:58:14.090 Db SecurityAgentHelper-arm64[818:1efd] [com.example.apple-samplecode.LoggingAuthPlugin:mechanism] creator-pid: 807 2025-08-20 15:58:14.090 Db SecurityAgentHelper-arm64[818:1efd] [com.example.apple-samplecode.LoggingAuthPlugin:mechanism] flags: 259 2025-08-20 15:58:14.090 Db SecurityAgentHelper-arm64[818:1efd] [com.example.apple-samplecode.LoggingAuthPlugin:mechanism] reason: 0 2025-08-20 15:58:14.090 Db SecurityAgentHelper-arm64[818:1efd] [com.example.apple-samplecode.LoggingAuthPlugin:mechanism] tries: 1 2025-08-20 15:58:14.090 Db SecurityAgentHelper-arm64[818:1efd] [com.example.apple-samplecode.LoggingAuthPlugin:mechanism] immutable hints: 2025-08-20 15:58:14.090 Db SecurityAgentHelper-arm64[818:1efd] [com.example.apple-samplecode.LoggingAuthPlugin:mechanism] client-apple-signed: true 2025-08-20 15:58:14.090 Db SecurityAgentHelper-arm64[818:1efd] [com.example.apple-samplecode.LoggingAuthPlugin:mechanism] client-firstparty-signed: true 2025-08-20 15:58:14.090 Db SecurityAgentHelper-arm64[818:1efd] [com.example.apple-samplecode.LoggingAuthPlugin:mechanism] creator-apple-signed: true 2025-08-20 15:58:14.090 Db SecurityAgentHelper-arm64[818:1efd] [com.example.apple-samplecode.LoggingAuthPlugin:mechanism] creator-firstparty-signed: true 2025-08-20 15:58:14.091 Db SecurityAgentHelper-arm64[818:1efd] [com.example.apple-samplecode.LoggingAuthPlugin:mechanism] arguments: 2025-08-20 15:58:14.091 Db SecurityAgentHelper-arm64[818:1efd] [com.example.apple-samplecode.LoggingAuthPlugin:mechanism] none 2025-08-20 15:58:14.108 Db SecurityAgentHelper-arm64[818:1efd] [com.example.apple-samplecode.LoggingAuthPlugin:mechanism] LAContext: LAContext[4:8:112] 2025-08-20 15:58:14.119 Db SecurityAgentHelper-arm64[818:1efd] [com.example.apple-samplecode.LoggingAuthPlugin:mechanism] token identities: 0 2025-08-20 15:58:14.120 Db SecurityAgentHelper-arm64[818:1efd] [com.example.apple-samplecode.LoggingAuthPlugin:mechanism] token watcher: <TKTokenWatcher: 0x11410ee70> Specifically, is there a manual/link somewhere that can allow me to interpret: authentication-failure: --S -14090 and pam_result: X-S 9
2
0
329
Aug ’25
Prevent batch operations on Secure Enclave
Hi, I have an application that uses SecureEnclave keys to protect secrets. By passing an LAContext object to the Secure Enclave operations, authentication state can be preserved across decrypt operations, and you do not need to re-authenticate for doing different operations. However, for security reasons, I would like to avoid that it is possible to do operations in batch with certain keys generated by the Secure Enclave, by any application. This would avoid malicious binaries to batch-extract all the secrets that are protected by a key from my Secure Enclave, and force to re-authenticate on every operation. Is there a way to prevent batch operations without re-authenticating for Secure Enclave keys? thanks, Remko
1
0
610
Jan ’26
Call log
I read online that there is no way to extract the call log from an iPhone. I want to develop an app to help people remember to call their mom, and if they did, the "nagging" would disappear automatically. I'm looking for any workaround to know when a user called someone, without having them log it manually.
1
0
449
Dec ’25
Inquiry Regarding Mandatory Sign in With Apple Requirements for Korean Developers
I understand from the recent Apple Developer News that Korean developers are now required to register a URL to receive notifications from the Apple server when creating or modifying a Sign in With Apple Service ID. However, it is not clear whether simply registering the URL is sufficient, or if it is also mandatory to implement the real-time processing of those notifications. I am inquiring whether the processing part is also a mandatory requirement.
0
0
167
Oct ’25
SSL Pinning in iOS Without Bundled Certificates
Hello, We recently implemented SSL pinning in our iOS app (Objective-C) using the common approach of embedding the server certificate (.cer) in the app bundle and comparing it in URLSession:didReceiveChallenge:. This worked fine initially, but when our backend team updated the server certificate (same domain, new cert from CA), the app immediately started failing because the bundled certificate no longer matched. We’d like to avoid shipping and updating our app every time the server’s certificate changes. Instead, we are looking for the Apple-recommended / correct approach to implement SSL pinning without embedding the actual certificate file in the app bundle. Specifically: . Is there a supported way to implement pinning based on the public key hash or SPKI hash (like sha256/... pins) rather than the full certificate? . How can this be safely implemented using NSURLSession / SecTrustEvaluate (iOS 15+ APIs, considering that SecTrustGetCertificateAtIndex is deprecated)? . Are there Apple-endorsed best practices for handling certificate rotation while still maintaining strong pinning? Any guidance or code samples would be greatly appreciated. We want to make sure we are following best practices and not relying on brittle implementations. Thanks in advance!
1
0
483
Aug ’25
Validating Signature Of XPC Process
Quinn, you've often suggested that to validate the other side of an XPC connection, we should use the audit token. But that's not available from the XPC object, whereas the PID is. So everyone uses the PID. While looking for something completely unrelated, I found this in the SecCode.h file OSStatus SecCodeCreateWithXPCMessage(xpc_object_t message, SecCSFlags flags, SecCodeRef * __nonnull CF_RETURNS_RETAINED target); Would this be the preferred way to do this now? At least from 11.0 and up. Like I said, I was looking for something completely unrelated and found this and don't have the cycles right now to try it. But it looks promising from the description and I wanted to check in with you about it in case you can say yes or no before I get a chance to test it. Thanks
8
0
8.3k
Aug ’25
CryptoKitError
Hi, I am using CryptoKit in my app. I am getting an error sometimes with some users. I log the description to Firebase but I am not sure what is it exactly about.  CryptoKit.CryptoKitError error 2  CryptoKit.CryptoKitError error 3 I receive both of these errors. I also save debug prints to a log file and let users share them with me. Logs are line-by-line encrypted but after getting these errors in the app also decryption of log files doesn't work and it throws these errors too. I couldn't reproduce the same error by myself, and I can't reach the user's logs so I am a little blind about what triggers this. It would be helpful to understand what these errors mean. Thanks
3
0
1.6k
May ’25
Title: Intermittent Keychain Data Loss on App Relaunch in iOS Beta 2
Hi everyone, I'm experiencing an intermittent issue with Keychain data loss on the latest iOS Beta 2. In about 7% of cases, users report that previously saved Keychain items are missing when the app is relaunched — either after a cold start or simply after being killed and reopened. Here are the key observations: The issue occurs sporadically, mostly once per affected user, but in 3 cases it has happened 4 times. No explicit deletion is triggered from the app. No system logs or error messages from Apple indicate any Keychain-related actions. The app attempts to access Keychain items, but they are no longer available. This behavior is inconsistent with previous iOS versions and is not reproducible in development environments. This raises concerns about: Whether this is a bug in the beta or an intentional change in Keychain behavior. Whether this could affect production apps when the final iOS version is released. The lack of any warning or documentation from Apple regarding this behavior. Has anyone else encountered similar issues? Any insights, workarounds, or official clarification would be greatly appreciated. Thanks!
2
0
131
Sep ’25
Emails sents through relay addresses go to spam
Hello, I’m experiencing an issue with email deliverability when sending messages through Apple’s private email relay service. Our app uses “Sign in with Apple” and sends communication emails to users through relay addresses . Messages are successfully delivered but are consistently being placed in users’ spam or junk folders. Configuration summary: Domain: myapp.example Mail server: OVH SMTP SPF and DKIM: Active and validated Domain and sender registered under “Sign in with Apple for Email Communication” Messages pass SPF and DKIM checks successfully, but emails relayed by Apple’s private service are still being marked as spam. Could anyone confirm if there are additional steps or configurations required to improve deliverability (e.g., DMARC alignment or specific header requirements)? Thank you for your help!
Replies
1
Boosts
0
Views
236
Activity
Nov ’25
Migrating App ID prefix to Team ID
My existing iOS app has a legacy App ID prefix which does not match my Team ID. I am planning on migrating it to my Team ID. I am aware of the potential issues with keychain access groups, however I wanted to double check that there are no issues related to "Sign in with Apple". My app is currently the "Primary App ID" in the "Sign in with Apple" settings. The full App ID is listed there, including the prefix. Can someone from the relevant team at Apple confirm that changing the App ID prefix to Team ID has no effect related to "Sign in with Apple"?
Replies
1
Boosts
0
Views
232
Activity
Nov ’25
[App Attest] DNS resolution failure for attest.apple.com / development.apple.com
Hello, We are working on integrating app integrity verification into our service application, following Apple's App Attest and DeviceCheck guide. Our server issues a challenge to the client, which then sends the challenge, attestation, and keyId in CBOR format to Apple's App Attest server for verification. However, we are unable to reach both https://attest.apple.com and https://attest.development.apple.com due to network issues. These attempts have been made from both our internal corporate network and mobile hotspot environments. Despite adjusting DNS settings and other configurations, the issue persists. Are there alternative methods or solutions to address this problem? Any recommended network configurations or guidelines to successfully connect to Apple's App Attest servers would be greatly appreciated. Thank you.
Replies
2
Boosts
0
Views
177
Activity
May ’25
ASPasswordCredential Returns a Blank Password with Apple Password App
Using the simplified sign-in with tvOS and a third party password manager, I receive a complete ASPasswordCredential, and I can easily log into my app. When I do the same thing but with Apple's password manager as the source, I receive an ASPasswordCredential that includes the email address, but the password is an empty string. I have tried deleting the credentials from Apple Passwords and regenerating them with a new login to the app's website. I have tried restarting my iPhone. Is this the expected behavior? How should I be getting a password from Apple's Password app with an ASAuthorizationPasswordRequest?
Replies
2
Boosts
0
Views
306
Activity
Aug ’25
Keychain is not getting opened after unlock when system.login.screensaver is updated to use authenticate-session-owner-or-admin
When we enable 3rd party authentication plugin using SFAuthorization window, then when user performs Lock Screen and then unlock the MAC. Now after unlock, if user tries to open Keychain Access, it is not getting opened. When trying to open Keychain Access, we are prompted for credentials but after providing the credentials Keychians are not getting opened. This is working on Sonoma 14.6.1 , but seeing this issue from macOS Sequoia onwards. Are there any suggested settings/actions to resolve this issue?
Replies
6
Boosts
0
Views
456
Activity
Aug ’25
Private Access Tokens - Documentation?
I cannot find any reference to this within the Apple developer documents (or certainly searching for multiple possible keywords yields no results). The only reference I can find is to documents written in support of its announcement in 2002: https://developer.apple.com/news/?id=huqjyh7k. Is there any further documentation on implementing or has the capability been deprecated?
Replies
1
Boosts
0
Views
424
Activity
Nov ’25
Unable to enable "Sign In with Apple" on Service ID – 501 PATCH Unsupported Request
Hello, I’m trying to set up Sign In with Apple for my Firebase Authentication integration. Steps I followed: Created a Service ID in Apple Developer, e.g. com.example.myapp.signin. Tried to enable Sign In with Apple and configure the Web Authentication Configuration. Web Domain: myapp.firebaseapp.com Return URL: https://myapp.firebaseapp.com/__/auth/handler When I click Save, I get the following error in the browser console and a blank response page: Unsupported Request PATCH to http://developer.apple.com/services-account/v1/bundleIds/XXXXXXXX not supported. Reference #... What I have verified so far: My Apple Developer Program membership is active (paid). My App ID (e.g. com.example.myapp) exists in Identifiers. The App ID has Sign In with Apple capability checked. I need to link the Service ID with this App ID for Firebase web-based auth. Goal: Complete setup of Apple as a sign-in provider in Firebase Authentication. To do this, Apple requires me to add the Firebase return URL above, but the Developer Portal prevents saving with the 501 error. Has anyone else run into this, and is there a workaround (e.g. enabling via Xcode, App Store Connect, or other methods)? Is this a known bug with the Apple Developer Portal? Here is the screenshot of the error: And Response part: Thanks in advance!
Replies
2
Boosts
0
Views
457
Activity
Aug ’25
Creating machine identifier to be used by daemon based app
I am developing a daemon-based product that needs a cryptographic, non-spoofable proof of machine identity so a remote management server can grant permissions based on the physical machine. I was thinking to create a signing key in the Secure Enclave and use a certificate signed by that key as the machine identity. The problem is that the Secure Enclave key I can create is only accessible from user context, while my product runs as a system daemon and must not rely on user processes or launchAgents. Could you please advise on the recommended Apple-supported approaches for this use case ? Specifically, Is there a supported way for a system daemon to generate and use an unremovable Secure Enclave key during phases like the pre-logon, that doesn't have non user context (only the my application which created this key/certificate will have permission to use/delete it) If Secure Enclave access from a daemon is not supported, what Apple-recommended alternatives exist for providing a hardware-backed machine identity for system daemons? I'd rather avoid using system keychain, as its contents may be removed or used by root privileged users. The ideal solution would be that each Apple product, would come out with a non removable signing certificate, that represent the machine itself (lets say that the cetificate name use to represent the machine ID), and can be validated by verify that the root signer is "Apple Root CA"
Replies
3
Boosts
0
Views
614
Activity
Nov ’25
mTLS : Guidance on Generating SecIdentity with Existing Private Key and Certificate
Hello, I am currently working on iOS application development using Swift, targeting iOS 17 and above, and need to implement mTLS for network connections. In the registration API flow, the app generates a private key and CSR on the device, sends the CSR to the server (via the registration API), and receives back the signed client certificate (CRT) along with the intermediate/CA certificate. These certificates are then imported on the device. The challenge I am facing is pairing the received CRT with the previously generated private key in order to create a SecIdentity. Could you please suggest the correct approach to generate a SecIdentity in this scenario? If there are any sample code snippets, WWDC videos, or documentation references available, I would greatly appreciate it if you could share them. Thank you for your guidance.
Replies
4
Boosts
0
Views
234
Activity
Aug ’25
SFCertificateView Memory Leak
I've been spending days trying to solve the memory leak in a small menu bar application I've wrote (SC Menu). I've used Instruments which shows the leaks and memory graph which shows unreleased allocations. This occurs when someone views a certificate on the smartcard. Basically it opens a new window and displays the certificate, the same way Keychain Access displays a certificate. Whenever I create an SFCertificateView instance and set setDetailsDisclosed(true) - a memory leak happens. Instruments highlights that line. import Cocoa import SecurityInterface class ViewCertsViewController: NSViewController { var selectedCert: SecIdentity? = nil override func viewDidLoad() { super.viewDidLoad() self.view = NSView(frame: NSRect(x: 0, y: 0, width: 500, height: 500)) self.view.wantsLayer = true var secRef: SecCertificate? = nil guard let selectedCert else { return } let certRefErr = SecIdentityCopyCertificate(selectedCert, &secRef) if certRefErr != errSecSuccess { os_log("Error getting certificate from identity: %{public}@", log: OSLog.default, type: .error, String(describing: certRefErr)) return } let scrollView = NSScrollView() scrollView.translatesAutoresizingMaskIntoConstraints = false scrollView.borderType = .lineBorder scrollView.hasHorizontalScroller = true scrollView.hasVerticalScroller = true let certView = SFCertificateView() guard let secRef = secRef else { return } certView.setCertificate(secRef) certView.setDetailsDisclosed(true) certView.setDisplayTrust(true) certView.setEditableTrust(true) certView.setDisplayDetails(true) certView.setPolicies(SecPolicyCreateBasicX509()) certView.translatesAutoresizingMaskIntoConstraints = false scrollView.documentView = certView view.addSubview(scrollView) // Layout constraints NSLayoutConstraint.activate([ scrollView.leadingAnchor.constraint(equalTo: view.leadingAnchor), scrollView.trailingAnchor.constraint(equalTo: view.trailingAnchor), scrollView.topAnchor.constraint(equalTo: view.topAnchor), scrollView.bottomAnchor.constraint(equalTo: view.bottomAnchor), // Provide certificate view a width and height constraint certView.widthAnchor.constraint(equalTo: scrollView.widthAnchor), certView.heightAnchor.constraint(greaterThanOrEqualToConstant: 500) ]) } } https://github.com/boberito/sc_menu/blob/dev_2.0/smartcard_menu/ViewCertsViewController.swift Fairly simple.
Replies
2
Boosts
0
Views
575
Activity
Oct ’25
SFAuthorizationPluginView::update() doesn't trigger MacOS to call view()
Has anybody else experienced something similar? This is on the login screen. I call update() and it doesn't call me back with view() 2025-08-21 17:04:38.669 Db SecurityAgentHelper-arm64[1134:2df1] [***:LoginView] calling update() Then silence...
Replies
2
Boosts
0
Views
491
Activity
Aug ’25
Request for manual on interpreting Security Authorization Plugin authentication failure codes
Using the SDK, I've printed out some log messages when I enter the wrong password: 2025-08-20 15:58:14.086 Db SecurityAgentHelper-arm64[818:1efd] [com.example.apple-samplecode.LoggingAuthPlugin:mechanism] invoke 2025-08-20 15:58:14.086 Db SecurityAgentHelper-arm64[818:1efd] [com.example.apple-samplecode.LoggingAuthPlugin:mechanism] general: 2025-08-20 15:58:14.086 Db SecurityAgentHelper-arm64[818:1efd] [com.example.apple-samplecode.LoggingAuthPlugin:mechanism] progname: 'SecurityAgentHelper-arm64' 2025-08-20 15:58:14.086 Db SecurityAgentHelper-arm64[818:1efd] [com.example.apple-samplecode.LoggingAuthPlugin:mechanism] OS version: 'Version 15.5 (Build 24F74)' 2025-08-20 15:58:14.086 Db SecurityAgentHelper-arm64[818:1efd] [com.example.apple-samplecode.LoggingAuthPlugin:mechanism] pid: '818' 2025-08-20 15:58:14.086 Db SecurityAgentHelper-arm64[818:1efd] [com.example.apple-samplecode.LoggingAuthPlugin:mechanism] ppid: '1' 2025-08-20 15:58:14.086 Db SecurityAgentHelper-arm64[818:1efd] [com.example.apple-samplecode.LoggingAuthPlugin:mechanism] euid: '92' 2025-08-20 15:58:14.086 Db SecurityAgentHelper-arm64[818:1efd] [com.example.apple-samplecode.LoggingAuthPlugin:mechanism] uid: '92' 2025-08-20 15:58:14.087 Db SecurityAgentHelper-arm64[818:1efd] [com.example.apple-samplecode.LoggingAuthPlugin:mechanism] session: 0x186e9 2025-08-20 15:58:14.087 Db SecurityAgentHelper-arm64[818:1efd] [com.example.apple-samplecode.LoggingAuthPlugin:mechanism] attributes: 2025-08-20 15:58:14.087 Db SecurityAgentHelper-arm64[818:1efd] [com.example.apple-samplecode.LoggingAuthPlugin:mechanism] is root: f 2025-08-20 15:58:14.087 Db SecurityAgentHelper-arm64[818:1efd] [com.example.apple-samplecode.LoggingAuthPlugin:mechanism] has graphics: t 2025-08-20 15:58:14.087 Db SecurityAgentHelper-arm64[818:1efd] [com.example.apple-samplecode.LoggingAuthPlugin:mechanism] has TTY: t 2025-08-20 15:58:14.087 Db SecurityAgentHelper-arm64[818:1efd] [com.example.apple-samplecode.LoggingAuthPlugin:mechanism] is remote: f 2025-08-20 15:58:14.087 Db SecurityAgentHelper-arm64[818:1efd] [com.example.apple-samplecode.LoggingAuthPlugin:mechanism] auth session: 0x0 2025-08-20 15:58:14.087 Db SecurityAgentHelper-arm64[818:1efd] [com.example.apple-samplecode.LoggingAuthPlugin:mechanism] context: 2025-08-20 15:58:14.088 Db SecurityAgentHelper-arm64[818:1efd] [com.example.apple-samplecode.LoggingAuthPlugin:mechanism] authentication-failure: --S -14090 2025-08-20 15:58:14.088 Db SecurityAgentHelper-arm64[818:1efd] [com.example.apple-samplecode.LoggingAuthPlugin:mechanism] pam_result: X-S 9 2025-08-20 15:58:14.089 Db SecurityAgentHelper-arm64[818:1efd] [com.example.apple-samplecode.LoggingAuthPlugin:mechanism] hints: 2025-08-20 15:58:14.089 Db SecurityAgentHelper-arm64[818:1efd] [com.example.apple-samplecode.LoggingAuthPlugin:mechanism] authorize-right: "system.login.console" 2025-08-20 15:58:14.090 Db SecurityAgentHelper-arm64[818:1efd] [com.example.apple-samplecode.LoggingAuthPlugin:mechanism] client-path: "/System/Library/CoreServices/loginwindow.app" 2025-08-20 15:58:14.090 Db SecurityAgentHelper-arm64[818:1efd] [com.example.apple-samplecode.LoggingAuthPlugin:mechanism] client-pid: 807 2025-08-20 15:58:14.090 Db SecurityAgentHelper-arm64[818:1efd] [com.example.apple-samplecode.LoggingAuthPlugin:mechanism] client-type: 'LDNB' 2025-08-20 15:58:14.090 Db SecurityAgentHelper-arm64[818:1efd] [com.example.apple-samplecode.LoggingAuthPlugin:mechanism] client-uid: 0 2025-08-20 15:58:14.090 Db SecurityAgentHelper-arm64[818:1efd] [com.example.apple-samplecode.LoggingAuthPlugin:mechanism] creator-audit-token: 2025-08-20 15:58:14.090 Db SecurityAgentHelper-arm64[818:1efd] [com.example.apple-samplecode.LoggingAuthPlugin:mechanism] ff ff ff ff 00 00 00 00 00 00 00 00 00 00 00 00 ................ 2025-08-20 15:58:14.090 Db SecurityAgentHelper-arm64[818:1efd] [com.example.apple-samplecode.LoggingAuthPlugin:mechanism] 00 00 00 00 27 03 00 00 e9 86 01 00 68 08 00 00 ....'.......h... 2025-08-20 15:58:14.090 Db SecurityAgentHelper-arm64[818:1efd] [com.example.apple-samplecode.LoggingAuthPlugin:mechanism] creator-pid: 807 2025-08-20 15:58:14.090 Db SecurityAgentHelper-arm64[818:1efd] [com.example.apple-samplecode.LoggingAuthPlugin:mechanism] flags: 259 2025-08-20 15:58:14.090 Db SecurityAgentHelper-arm64[818:1efd] [com.example.apple-samplecode.LoggingAuthPlugin:mechanism] reason: 0 2025-08-20 15:58:14.090 Db SecurityAgentHelper-arm64[818:1efd] [com.example.apple-samplecode.LoggingAuthPlugin:mechanism] tries: 1 2025-08-20 15:58:14.090 Db SecurityAgentHelper-arm64[818:1efd] [com.example.apple-samplecode.LoggingAuthPlugin:mechanism] immutable hints: 2025-08-20 15:58:14.090 Db SecurityAgentHelper-arm64[818:1efd] [com.example.apple-samplecode.LoggingAuthPlugin:mechanism] client-apple-signed: true 2025-08-20 15:58:14.090 Db SecurityAgentHelper-arm64[818:1efd] [com.example.apple-samplecode.LoggingAuthPlugin:mechanism] client-firstparty-signed: true 2025-08-20 15:58:14.090 Db SecurityAgentHelper-arm64[818:1efd] [com.example.apple-samplecode.LoggingAuthPlugin:mechanism] creator-apple-signed: true 2025-08-20 15:58:14.090 Db SecurityAgentHelper-arm64[818:1efd] [com.example.apple-samplecode.LoggingAuthPlugin:mechanism] creator-firstparty-signed: true 2025-08-20 15:58:14.091 Db SecurityAgentHelper-arm64[818:1efd] [com.example.apple-samplecode.LoggingAuthPlugin:mechanism] arguments: 2025-08-20 15:58:14.091 Db SecurityAgentHelper-arm64[818:1efd] [com.example.apple-samplecode.LoggingAuthPlugin:mechanism] none 2025-08-20 15:58:14.108 Db SecurityAgentHelper-arm64[818:1efd] [com.example.apple-samplecode.LoggingAuthPlugin:mechanism] LAContext: LAContext[4:8:112] 2025-08-20 15:58:14.119 Db SecurityAgentHelper-arm64[818:1efd] [com.example.apple-samplecode.LoggingAuthPlugin:mechanism] token identities: 0 2025-08-20 15:58:14.120 Db SecurityAgentHelper-arm64[818:1efd] [com.example.apple-samplecode.LoggingAuthPlugin:mechanism] token watcher: <TKTokenWatcher: 0x11410ee70> Specifically, is there a manual/link somewhere that can allow me to interpret: authentication-failure: --S -14090 and pam_result: X-S 9
Replies
2
Boosts
0
Views
329
Activity
Aug ’25
Prevent batch operations on Secure Enclave
Hi, I have an application that uses SecureEnclave keys to protect secrets. By passing an LAContext object to the Secure Enclave operations, authentication state can be preserved across decrypt operations, and you do not need to re-authenticate for doing different operations. However, for security reasons, I would like to avoid that it is possible to do operations in batch with certain keys generated by the Secure Enclave, by any application. This would avoid malicious binaries to batch-extract all the secrets that are protected by a key from my Secure Enclave, and force to re-authenticate on every operation. Is there a way to prevent batch operations without re-authenticating for Secure Enclave keys? thanks, Remko
Replies
1
Boosts
0
Views
610
Activity
Jan ’26
Call log
I read online that there is no way to extract the call log from an iPhone. I want to develop an app to help people remember to call their mom, and if they did, the "nagging" would disappear automatically. I'm looking for any workaround to know when a user called someone, without having them log it manually.
Replies
1
Boosts
0
Views
449
Activity
Dec ’25
Inquiry Regarding Mandatory Sign in With Apple Requirements for Korean Developers
I understand from the recent Apple Developer News that Korean developers are now required to register a URL to receive notifications from the Apple server when creating or modifying a Sign in With Apple Service ID. However, it is not clear whether simply registering the URL is sufficient, or if it is also mandatory to implement the real-time processing of those notifications. I am inquiring whether the processing part is also a mandatory requirement.
Replies
0
Boosts
0
Views
167
Activity
Oct ’25
SSL Pinning in iOS Without Bundled Certificates
Hello, We recently implemented SSL pinning in our iOS app (Objective-C) using the common approach of embedding the server certificate (.cer) in the app bundle and comparing it in URLSession:didReceiveChallenge:. This worked fine initially, but when our backend team updated the server certificate (same domain, new cert from CA), the app immediately started failing because the bundled certificate no longer matched. We’d like to avoid shipping and updating our app every time the server’s certificate changes. Instead, we are looking for the Apple-recommended / correct approach to implement SSL pinning without embedding the actual certificate file in the app bundle. Specifically: . Is there a supported way to implement pinning based on the public key hash or SPKI hash (like sha256/... pins) rather than the full certificate? . How can this be safely implemented using NSURLSession / SecTrustEvaluate (iOS 15+ APIs, considering that SecTrustGetCertificateAtIndex is deprecated)? . Are there Apple-endorsed best practices for handling certificate rotation while still maintaining strong pinning? Any guidance or code samples would be greatly appreciated. We want to make sure we are following best practices and not relying on brittle implementations. Thanks in advance!
Replies
1
Boosts
0
Views
483
Activity
Aug ’25
Validating Signature Of XPC Process
Quinn, you've often suggested that to validate the other side of an XPC connection, we should use the audit token. But that's not available from the XPC object, whereas the PID is. So everyone uses the PID. While looking for something completely unrelated, I found this in the SecCode.h file OSStatus SecCodeCreateWithXPCMessage(xpc_object_t message, SecCSFlags flags, SecCodeRef * __nonnull CF_RETURNS_RETAINED target); Would this be the preferred way to do this now? At least from 11.0 and up. Like I said, I was looking for something completely unrelated and found this and don't have the cycles right now to try it. But it looks promising from the description and I wanted to check in with you about it in case you can say yes or no before I get a chance to test it. Thanks
Replies
8
Boosts
0
Views
8.3k
Activity
Aug ’25
Is there a way for MDM to push a unique mTLS certificate w/ our Application?
Hi, It may be a stupid question, but we really wonder if there is a way for MDM to push a unique mTLS cert to our iOS application or if it can populate a client certificate in the iOS where our application can access it. Like browser app, how do browser mTLS certs get pushed? Thanks, Ying
Replies
2
Boosts
0
Views
834
Activity
Apr ’25
CryptoKitError
Hi, I am using CryptoKit in my app. I am getting an error sometimes with some users. I log the description to Firebase but I am not sure what is it exactly about.  CryptoKit.CryptoKitError error 2  CryptoKit.CryptoKitError error 3 I receive both of these errors. I also save debug prints to a log file and let users share them with me. Logs are line-by-line encrypted but after getting these errors in the app also decryption of log files doesn't work and it throws these errors too. I couldn't reproduce the same error by myself, and I can't reach the user's logs so I am a little blind about what triggers this. It would be helpful to understand what these errors mean. Thanks
Replies
3
Boosts
0
Views
1.6k
Activity
May ’25
Title: Intermittent Keychain Data Loss on App Relaunch in iOS Beta 2
Hi everyone, I'm experiencing an intermittent issue with Keychain data loss on the latest iOS Beta 2. In about 7% of cases, users report that previously saved Keychain items are missing when the app is relaunched — either after a cold start or simply after being killed and reopened. Here are the key observations: The issue occurs sporadically, mostly once per affected user, but in 3 cases it has happened 4 times. No explicit deletion is triggered from the app. No system logs or error messages from Apple indicate any Keychain-related actions. The app attempts to access Keychain items, but they are no longer available. This behavior is inconsistent with previous iOS versions and is not reproducible in development environments. This raises concerns about: Whether this is a bug in the beta or an intentional change in Keychain behavior. Whether this could affect production apps when the final iOS version is released. The lack of any warning or documentation from Apple regarding this behavior. Has anyone else encountered similar issues? Any insights, workarounds, or official clarification would be greatly appreciated. Thanks!
Replies
2
Boosts
0
Views
131
Activity
Sep ’25