Sign in with Apple

RSS for tag

Discuss how to provide users the ability to sign in to your apps and websites using their Apple ID.

Sign in with Apple Documentation

Posts under Sign in with Apple subtopic

Post

Replies

Boosts

Views

Activity

Apple Account Security and Passkeys
hello, I'm writing to seek clarification on Apple account security, particularly regarding potential risks of compromise, implemented safeguards, and residual risks with corresponding mitigation strategies. We would appreciate your insights on the following specific points: iCloud Keychain Access: Is an Apple ID login strictly required to access iCloud Keychain? We understand that a compromise of iCloud Keychain is unlikely unless a malicious actor successfully takes over the legitimate user's Apple ID. Is this understanding correct? Passkey Theft Methods and Protections: What are the conceivable methods a malicious actor might employ to steal a legitimate user's passkey, and how are these attempts protected against? Impact of Apple ID Compromise on Passkeys: If a malicious actor successfully compromises a legitimate user's Apple ID, is it accurate to assume that the legitimate user's passkeys would then synchronize to the attacker's device, potentially allowing them to log in using their own biometrics? Authorization Flow on Legitimate User's Device: Could you please detail the authorization flow that occurs on the legitimate user's device? We are particularly interested in the types of authentication involved and the conditions under which they are triggered. Detection and Additional Authentication for Unauthorized Login: How are attempts to log in to an Apple ID from an unrecognized device or browser detected, and what additional authentication steps are implemented in such scenarios? Thank you for your time and assistance in addressing these important security questions.
0
0
144
Feb ’26
400 Invalid request when use usermigrationinfo at the second time transferring
I'm testing app transferring, before, I have migrate user from teamA to teamB, including subA->transferSub->subB process, now I'm transfer the app from teamB to teamC, after the transfer requested, I can't get transfer_id by /usermigrationinfo api, which response 400 invalid request. the question is I can still get transfer sub by the auth/token api(grant_type: authorization_code) with teamB parameters(teamIdB/clientIdB/appSecretB/redirectUrlB/subB),but the value is same as first time transfer_id which get during teamA to teamB. when use parameters above with target(teamIdC) to request /usermigrationinfo, invalid request was responsed. im sure that all parameters is correct, dose it cause by teamB still in 60-days first transferring(sure already accepted)?
0
0
156
Feb ’26
Sign In With Apple not working with Xcode 12 beta on simulator ?
Running the sample "Juice" app, which demos the Sign In With Apple flow, doesn't seem to work with Xcode 12 beta and iOS 14 beta on the simulator (worked fine on the non-beta versions and on a real device with iOS 14 beta). Once the password for the device's Apple ID is entered, the wheel in the password field just keeps spinning. No error messages and nothing handed back over to the app from the ASAuthorizationController. Anyone else seeing this problem ? Are there any workarounds ?
207
5
104k
Feb ’26
Sign in with Apple: Token status after app deletion in App Store Connect
Hello, I have a question regarding the lifecycle of user consent and tokens in "Sign in with Apple." Specifically, I would like to understand the behavior of the auth/revoke API in relation to App Store Connect status changes. Impact of App Status Changes If an app is "Removed from Sale" or "Deleted" from App Store Connect, does Apple automatically revoke all associated user tokens and consent? Or is it still the developer's responsibility to programmatically revoke each user's token via the REST API to ensure the app is removed from the user’s "Apps Using Apple ID" list? API Availability after Removal Once an app is no longer available on the App Store (or its record is deleted in App Store Connect), is the auth/revoke REST API still accessible? I want to ensure that a developer can still perform necessary privacy clean-up tasks (revoking consent) even if the app is not currently distributed. Specific User Impacts of Non-Revocation If we do not call the revocation API, besides the app remaining in the "Sign in with Apple" list, what are the specific consequences for the user? Thank you for your guidance.
0
0
384
Jan ’26
How to handle Sign in with Apple Server to server Notifications?
Hello. When a user revokes Apple Login authorization, I am expecting a webhook to be delivered to our configured endpoint, but I currently not receiving any at all. So I have some questions: Should the revoke event webhook be delivered in real-time? If it is not real-time, when is the webhook supposed to be sent? If my server fails to respond to the webhook request, does Apple retry the delivery? (Actually I couldn't find how to response in this scenario, but if I can) Thanks in advance.
1
0
483
Jan ’26
AKAuthenticationError Code=-7026
I want to add the "Sign In with Apple" feature to my iPadOS application. I've already done the following: Include com.apple.developer.applesignin in mobileprovision Include com.apple.developer.applesignin in entitlements However, I'm getting the following errors: `Authorization failed: Error Domain=AKAuthenticationError Code=-7026 "(null)" UserInfo={AKClientBundleID=xxxx} LaunchServices: store (null) or url (null) was nil: Error Domain=NSOSStatusErrorDomain Code=-54 "process may not map database" UserInfo={_LSLine=72, _LSFunction=_LSServer_GetServerStoreForConnectionWithCompletionHandler, _LSFile=LSDReadService.mm, NSDebugDescription=process may not map database} Attempt to map database failed: permission was denied. This attempt will not be retried. Failed to initialize client context with error Error Domain=NSOSStatusErrorDomain Code=-54 "process may not map database" UserInfo={_LSLine=72, _LSFunction=_LSServer_GetServerStoreForConnectionWithCompletionHandler, _LSFile=LSDReadService.mm, NSDebugDescription=process may not map database} Failed to get application extension record: Error Domain=NSOSStatusErrorDomain Code=-54 "(null)" ASAuthorizationController credential request failed with error: Error Domain=com.apple.AuthenticationServices.AuthorizationError Code=1000 "(null)" ` What is this problem? How can I solve it? Hoping someone can help, thank you!
1
0
430
Jan ’26
Missing "is_private_email" claim in ID Token for Hide My Email users
Hello, I am implementing "Sign in with Apple" on my backend and validating the Identity Token (JWT) received from the client. I noticed that for some users who choose the "Hide My Email" option, the is_private_email claim is missing from the ID Token payload, even though the email address clearly belongs to the private relay domain (@privaterelay.appleid.com). Here is an example of the decoded payload I received: { "iss": "https://appleid.apple.com", "aud": "com.platform.elderberry.new.signinwithapple", "exp": 1764402438, "iat": 1764316038, "sub": "000851.86193ef81ad247feb673746c19424f28.0747", "c_hash": "3FAJNf4TILzUgo_YFe4E0Q", "email": "x8sqp2dgvv@privaterelay.appleid.com", "email_verified": true, "auth_time": 1764316038, "nonce_supported": true // "is_private_email": true <-- This field is missing } My Questions: Is the is_private_email claim considered optional in the ID Token? Is it safe and recommended to rely solely on the email domain suffix (@privaterelay.appleid.com) to identify if a user is using a private email? Any insights or official references would be appreciated. Thanks.
1
0
653
Jan ’26
Missing "is_private_email" claim in ID Token for Hide My Email users
Hello, I am implementing "Sign in with Apple" on my backend and validating the Identity Token (JWT) received from the client. I noticed that for some users who choose the "Hide My Email" option, the is_private_email claim is missing from the ID Token payload, even though the email address clearly belongs to the private relay domain (@privaterelay.appleid.com). Here is an example of the decoded payload I received: { "iss": "https://appleid.apple.com", "aud": "xxx", "exp": 1764402438, "iat": 1764316038, "sub": "xxxxxxxx", "c_hash": "3FAJNf4TILzUgo_YFe4E0Q", "email": "xxx@privaterelay.appleid.com", "email_verified": true, "auth_time": 1764316038, "nonce_supported": true // "is_private_email": true <-- This field is missing } My Questions: Is the is_private_email claim considered optional in the ID Token? Is it safe and recommended to rely solely on the email domain suffix (@privaterelay.appleid.com) to identify if a user is using a private email? Any insights or official references would be appreciated. Thanks.
1
0
355
Jan ’26
Apple Login using Firebase on EXPO(fro android and ios)
Hello I am trying to release an application using EXPO ROUTER + EXPO RN WEB. I am trying to implement Apple Login using Firebase. I have already put necessary info in both App Store Connect and Firebas console. Now I am so confused what I have to do next. What are some resource I could use or tips you could possibly give me when making apple login available using firebase. Pleas all helps are welcomed and needed
1
0
303
Jan ’26
Discrepancy in Sign in with Apple Notification Type: account-deleted vs account-delete
Hi everyone, I am currently implementing Server-to-Server Notifications for Sign in with Apple. I’ve encountered a discrepancy between the official documentation and the actual payload I received, and I would like to clarify which one is correct. The Situation: I triggered an account deletion event via privacy.apple.com to test the notification flow. When my server received the notification, the type field in the JSON payload was account-deleted (past tense). The Issue: According to the official Apple documentation, the event type is listed as account-delete (present tense). Here is the discrepancy I am observing: Documentation: account-delete Actual Payload: account-deleted My Question: Is the documentation outdated, or is this a known inconsistency? Should I handle both strings (account-delete and account-deleted) in my backend logic to be safe, or is account-deleted the new standard? Any insights or confirmation from those who have implemented this would be greatly appreciated. Thanks!
2
0
483
Jan ’26
Not receiving Sign in with Apple Server-to-Server Notifications despite correct configuration
I received a notification stating that we need to register a server-to-server notification endpoint to handle the following three events: Changes in email forwarding preferences. Account deletions in your app. Permanent Apple Account deletions. However, even though we have registered the API endpoint under our Identifier configuration, it appears that we are not receiving any API calls when these events trigger. I honestly have no idea what’s going wrong. I’ve checked our WAF logs and there’s no trace of any incoming traffic at all. Is it possible that Apple hasn't started sending these notifications yet, or is there something I might be missing? I’m stuck and don’t know how to resolve this. I would really appreciate any help or insights you could share. Thank you.
0
0
259
Jan ’26
Not receiving Sign in with Apple Server-to-Server Notifications despite correct configuration
I received a notification stating that we need to register a server-to-server notification endpoint to handle the following three events: Changes in email forwarding preferences. Account deletions in your app. Permanent Apple Account deletions. However, even though we have registered the API endpoint under our Identifier configuration, it appears that we are not receiving any API calls when these events trigger. I honestly have no idea what’s going wrong. I’ve checked our WAF logs and there’s no trace of any incoming traffic at all. Is it possible that Apple hasn't started sending these notifications yet, or is there something I might be missing? I’m stuck and don’t know how to resolve this. I would really appreciate any help or insights you could share. Thank you.
0
0
166
Jan ’26
Apple Sign-In Fails with Mysterious 404 Error on Non-Existent /appleauth/auth/federate Endpoint
I'm implementing Apple Sign-In in my Next.js application with a NestJS backend. After the user authenticates with Apple, instead of redirecting to my configured callback URL, the browser makes a POST request to a mysterious endpoint /appleauth/auth/federate that doesn't exist in my codebase, resulting in a 404 error. Tech Stack Frontend: Next.js 16.0.10, React 19.2.0 Backend: NestJS with Passport (using @arendajaelu/nestjs-passport-apple) Frontend URL: https://myapp.example.com Backend URL: https://api.example.com Apple Developer Configuration Service ID: (configured correctly in Apple Developer Console) Return URL (only one configured): https://api.example.com/api/v1/auth/apple/callback Domains verified in Apple Developer Console: myapp.example.com api.example.com example.com Backend Configuration NestJS Controller (auth.controller.ts): typescript @Public() @Get('apple') @UseGuards(AuthGuard('apple')) async appleAuth() { // Initiates Apple OAuth flow } @Public() @Post('apple/callback') // Changed from @Get to @Post for form_post @UseGuards(AuthGuard('apple')) async appleAuthCallback(@Req() req: any, @Res() res: any) { const result = await this.authService.socialLogin(req.user, ipAddress, userAgent); // Returns HTML with tokens that uses postMessage to send to opener window } Environment Variables: typescript APPLE_CLIENT_ID=<service_id> APPLE_TEAM_ID=<team_id> APPLE_KEY_ID=<key_id> APPLE_PRIVATE_KEY_PATH=./certs/AuthKey_XXX.p8 APPLE_CALLBACK_URL=https://api.example.com/api/v1/auth/apple/callback FRONTEND_URL=https://myapp.example.com The passport-apple strategy uses response_mode: 'form_post', so Apple POSTs the authorization response to the callback URL. Frontend Implementation Next.js API Route (/src/app/api/auth/apple/route.js): javascript export async function GET(request) { const backendUrl = new URL(`${API_URL}/auth/apple`); const response = await fetch(backendUrl.toString(), { method: "GET", headers: { "Content-Type": "application/json", }, }); const responseText = await response.text(); return new NextResponse(responseText, { status: response.status, headers: { "Content-Type": contentType || "text/html" }, }); } Frontend Auth Handler: javascript export const handleAppleLogin = (router, setApiError) => { const frontendUrl = window?.location?.origin; // Opens popup to /api/auth/apple window.open( `${frontendUrl}/api/auth/apple`, "appleLogin", "width=500,height=600" ); }; The Problem Expected Flow: User clicks "Login with Apple" Frontend opens popup → https://myapp.example.com/api/auth/apple Frontend proxies to → https://api.example.com/api/v1/auth/apple Backend redirects to Apple's authentication page User authenticates with Apple ID Apple POSTs back to → https://api.example.com/api/v1/auth/apple/callback Backend processes and returns success HTML Actual Behavior: After step 5 (user authentication with Apple), instead of Apple redirecting to my callback URL, the browser makes this unexpected request: POST https://myapp.example.com/appleauth/auth/federate?isRememberMeEnabled=false Status: 404 Not Found Request Payload: json { "accountName": "user@example.com", "rememberMe": false } Network Tab Analysis From Chrome DevTools, the call stack shows: send @ app.js:234 ajax @ app.js:234 (anonymous) @ app.js:10 Ee.isFederated @ app.js:666 _callAuthFederate @ app.js:666 The Ee.isFederated and _callAuthFederate functions appear to be minified library code, but I cannot identify which library. What I've Verified ✅ The /appleauth/auth/federate endpoint does not exist anywhere in my codebase: bash grep -r "appleauth" src/ # No results grep -r "federate" src/ # No results ✅ Apple Developer Console shows only ONE Return URL configured (verified multiple times) ✅ Changed callback route from @Get to @Post to handle form_post response mode ✅ Rebuilt frontend completely multiple times: bash rm -rf .next npm run build ✅ Tested in: Incognito/Private browsing mode Different browsers (Chrome, Firefox, Safari) Different devices After clearing all cache and cookies ✅ No service workers registered in the application ✅ No external <script> tags or CDN libraries loaded ✅ package.json contains no AWS Amplify, Auth0, Cognito, or similar federated auth libraries ✅ Checked layout.js and all root-level files - no external scripts Additional Context Google Sign-In works perfectly fine using the same approach The mysterious endpoint uses a different path structure (/appleauth/ vs /api/auth/) The call appears to originate from client-side JavaScript (based on the call stack) The app.js file with the mysterious functions is the built Next.js bundle Questions Where could this /appleauth/auth/federate endpoint be coming from? Why is the browser making this POST request instead of following Apple's redirect to my configured callback URL? Could this be related to the response_mode: 'form_post' in the Apple Passport strategy? Is there something in the Apple Developer Primary App ID configuration that could trigger this behavior? Could this be a Next.js build artifact or some hidden dependency? The mysterious call stack references (Ee.isFederated, _callAuthFederate) suggest some library is intercepting the Apple authentication flow, but I cannot identify what library or where it's being loaded from. The minified function names suggest federated authentication, but I have no such libraries in my dependencies. Has anyone encountered similar issues with Apple Sign-In where an unexpected endpoint is being called?
0
0
533
Jan ’26
Questions about user impact and best practices for rotating the private key used for Sign in with Apple
Hi, We are operating a service that uses Sign in with Apple for user registration and login. As part of our security incident response and periodic security improvements, we are planning to rotate the private key used to generate the client secret (JWT) for Sign in with Apple. I have read the Human Interface Guidelines and the AuthenticationServices documentation, but I could not find a clear description of the behavior and user impact when rotating this private key. I would like to ask the following questions: Background: We issue a Sign in with Apple private key (with a Key ID) in our Apple Developer account. Our server uses this private key to generate the client secret (JWT). This is used for Sign in with Apple login on our web / mobile app. We are planning to invalidate the existing private key and switch to a newly issued one. Questions: Impact on existing logged-in sessions Will rotating the private key force already logged-in users (who previously signed in with Apple) to be logged out from our service? Can the user identifier (such as the "sub" claim) for existing Sign in with Apple users change due to key rotation? Recommended frequency and best practices Does Apple recommend rotating this private key only when it is compromised, or on a regular basis? If there are any official documents or examples that describe how to safely perform key rotation in production, we would appreciate a pointer. Impact on marketing / analytics We are using user IDs (linked via Sign in with Apple) for analytics and marketing attribution. Is there any expected impact on such use cases caused by rotating the private key? For example, is there any possibility that user identifiers change as a result of key rotation, or anything we should be careful about from a data linkage perspective? Our goal is to rotate the private key in a secure way without causing service downtime, mass logouts, or loss of account linkage. If there is already an official document that covers this, please let me know the URL. Thank you in advance.
0
0
136
Dec ’25
How to collect a user's real email address when using Sign in with Apple and Private Relay?
I’m using Sign in with Apple in my iOS app. When a user chooses “Hide My Email”, I receive the @privaterelay.appleid.com relay address. For marketing reasons, I would prefer to have the user’s real email address instead of the relay email. I want to stay compliant with App Store Review and the Sign in with Apple design/UX requirements. My questions are: Is it allowed to force the user (as part of the registration process) to provide their real email address, even if they chose “Hide My Email” during Sign in with Apple? Are there any specific App Store Review guidelines that forbid: Blocking sign up or access to features if the user keeps the relay email, or Showing a strong prompt like “We can’t log you in unless you share your real email”? What is the recommended, compliant pattern for collecting a “real” email when using Sign in with Apple + Private Relay? I’d appreciate any official clarification or examples of what App Review considers acceptable vs. reject-worthy here.
1
0
207
Nov ’25
App Transfer and User Migration - Questions on Apple Sign-In Token Behavior and Testing Process
Hi Apple Developer Community, We have carefully reviewed the documentation on App Transfer and User Migration, but we still have a few unresolved questions regarding Apple Sign-In token behavior and testing strategies. Would appreciate any guidance! Token Behavior for Pre-Transfer App Versions After the app transfer: If a user logs in via an existing pre-transfer version of the app (published under Team A before transfer), will the Apple Sign-In token’s sub (or private email) switch to new value tie to Team B, or unchanged? This is critical for our user migration plan. Preserving sub Across Transfers (Internal Team Transfer) Since our app-transfer is an internal transfer (no change in app ownership outside our organization), is there a way to retain the original sub value(or private email) for users after the transfer? We are concerned that Apple Sign-In errors during the app transfer process may negatively impact user experience. Testing the Transfer Process Safely We’d like to simulate the app transfer and user migration process in a sandbox/test environment before executing it in production. Is there a way to test app transfers without affecting live users? (e.g., a staging mode for transfers) Thank you for your expertise! Any insights would be invaluable.
1
0
375
Nov ’25
Migrating Sign in with Apple users for an app transfer
Question detail Dear Apple Developer Technical Support, We are currently following the official Apple documentation “TN3159: Migrating Sign in with Apple users for an app transfer” to carry out a Sign in with Apple user migration after successfully transferring several apps to a new developer account. Here is a summary of our situation: Under the original Apple developer account, we had five apps using Sign in with Apple, grouped under a shared primary app using App Grouping. Recently, we transferred three of these apps to our new Apple developer account via App Store Connect. After the transfer, these three apps are no longer associated with the original primary App ID. We reconfigured individual Services IDs for each app in the new account and enabled Sign in with Apple for each. More than 24 hours have passed since the app transfer was completed. Now we are attempting to follow the migration process to restore user access via the user.migration flow. Specifically, we are using the following script to request an Apple access token: url = "https://appleid.apple.com/auth/token" headers = {"Content-Type": "application/x-www-form-urlencoded"} data = { "grant_type": "client_credentials", "scope": "user.migration", "client_id": "com.game.friends.ios.xxxx", # New Primary ID in the new account "client_secret": "<JWT signed with new p8 key>" } response = requests.post(url, headers=headers, data=data) However, the API response consistently returns: { "error": "invalid_client" } We have verified that the following configurations are correct: The client_secret is generated using the p8 key from the new account, signed with ES256 and correct key_id, team_id, and client_id. The client_id corresponds to the Services ID created in the new account and properly associated with the migrated app. The scope is set to user.migration. The JWT payload contains correct iss, sub, and aud values as per Apple documentation. The app has been fully transferred and reconfigured more than 24 hours ago. Problem Summary & Request for Support: According to Apple’s official documentation: “After an app is transferred, Apple updates the Sign in with Apple configuration in the background. This can take up to 24 hours. During this time, attempts to authenticate users or validate tokens may fail.” However, we are still consistently receiving invalid_client errors after the 24-hour waiting period. We suspect one of the following issues: The transferred apps may still be partially associated with the original App Grouping or primary App ID. Some Sign in with Apple configuration in Apple’s backend may not have been fully updated after the transfer. Or the Services ID is not yet fully operational for the transferred apps in the new account. We kindly request your assistance to: Verify whether the transferred apps have been completely detached from the original App Grouping and primary App ID. Confirm whether the new Services IDs under the new account are fully functional and eligible for Sign in with Apple with user.migration scope. Help identify any remaining configuration or migration issues that may cause the invalid_client error. If necessary, assist in manually ungrouping or clearing any residual App Grouping relationships affecting the new environment. We have also generated and retained the original transfer_sub identifiers and are fully prepared to complete the sub mapping once the user.migration flow becomes functional. Thank you very much for your time and support!
2
0
580
Nov ’25
Sending email to private.email from transferred app
Goal I want to reply to feedback from customers who signed up using a private.relay account. Problem I am getting this error when sending an email: Reporting-MTA: dns; mailfout.stl.internal X-Postfix-Queue-ID: B87481D0015B X-Postfix-Sender: rfc822; hello@mydomain.com Arrival-Date: Fri, 7 Nov 2025 03:37:29 -0500 (EST) Final-Recipient: rfc822; xxxx@privaterelay.appleid.com Original-Recipient: rfc822;xxxx@privaterelay.appleid.com Action: failed Status: 5.1.1 Remote-MTA: dns; smtp3.privaterelay.appleid.com Diagnostic-Code: smtp; 550 5.1.1 <hello@mydomain.com>: unauthorized sender What have I done? I have configured mydomain.com in the Email Configuration Service inside of apple, as well as the email hello@mydomain.com. Using https://www.mail-tester.com/, I could confirm that the - [SPF] Your server 202.12.124.158 is authorized to use hello@mydomain.com - Your DKIM signature is valid - Your message passed the DMARC test My hunch This app was transferred and the previous owner did not have the email configuration set up. The emails I am writing messages to signed up at that time. Questions: If I rescue the old account and set up the email configuration, would it work? Is there any other tip I could try to apply?
1
0
150
Nov ’25
Apple Account Security and Passkeys
hello, I'm writing to seek clarification on Apple account security, particularly regarding potential risks of compromise, implemented safeguards, and residual risks with corresponding mitigation strategies. We would appreciate your insights on the following specific points: iCloud Keychain Access: Is an Apple ID login strictly required to access iCloud Keychain? We understand that a compromise of iCloud Keychain is unlikely unless a malicious actor successfully takes over the legitimate user's Apple ID. Is this understanding correct? Passkey Theft Methods and Protections: What are the conceivable methods a malicious actor might employ to steal a legitimate user's passkey, and how are these attempts protected against? Impact of Apple ID Compromise on Passkeys: If a malicious actor successfully compromises a legitimate user's Apple ID, is it accurate to assume that the legitimate user's passkeys would then synchronize to the attacker's device, potentially allowing them to log in using their own biometrics? Authorization Flow on Legitimate User's Device: Could you please detail the authorization flow that occurs on the legitimate user's device? We are particularly interested in the types of authentication involved and the conditions under which they are triggered. Detection and Additional Authentication for Unauthorized Login: How are attempts to log in to an Apple ID from an unrecognized device or browser detected, and what additional authentication steps are implemented in such scenarios? Thank you for your time and assistance in addressing these important security questions.
Replies
0
Boosts
0
Views
144
Activity
Feb ’26
400 Invalid request when use usermigrationinfo at the second time transferring
I'm testing app transferring, before, I have migrate user from teamA to teamB, including subA->transferSub->subB process, now I'm transfer the app from teamB to teamC, after the transfer requested, I can't get transfer_id by /usermigrationinfo api, which response 400 invalid request. the question is I can still get transfer sub by the auth/token api(grant_type: authorization_code) with teamB parameters(teamIdB/clientIdB/appSecretB/redirectUrlB/subB),but the value is same as first time transfer_id which get during teamA to teamB. when use parameters above with target(teamIdC) to request /usermigrationinfo, invalid request was responsed. im sure that all parameters is correct, dose it cause by teamB still in 60-days first transferring(sure already accepted)?
Replies
0
Boosts
0
Views
156
Activity
Feb ’26
Sign In With Apple not working with Xcode 12 beta on simulator ?
Running the sample "Juice" app, which demos the Sign In With Apple flow, doesn't seem to work with Xcode 12 beta and iOS 14 beta on the simulator (worked fine on the non-beta versions and on a real device with iOS 14 beta). Once the password for the device's Apple ID is entered, the wheel in the password field just keeps spinning. No error messages and nothing handed back over to the app from the ASAuthorizationController. Anyone else seeing this problem ? Are there any workarounds ?
Replies
207
Boosts
5
Views
104k
Activity
Feb ’26
New South Korea Account Notification Requirement
https://developer.apple.com/news/?id=j9zukcr6 starting from Jan 2026 there is change in requirements for account notifications for Sign in with Apple. Does this apply only to developers based in South Korea or all apps which are avai via the korean App Store?
Replies
1
Boosts
0
Views
668
Activity
Jan ’26
Sign in with Apple: Token status after app deletion in App Store Connect
Hello, I have a question regarding the lifecycle of user consent and tokens in "Sign in with Apple." Specifically, I would like to understand the behavior of the auth/revoke API in relation to App Store Connect status changes. Impact of App Status Changes If an app is "Removed from Sale" or "Deleted" from App Store Connect, does Apple automatically revoke all associated user tokens and consent? Or is it still the developer's responsibility to programmatically revoke each user's token via the REST API to ensure the app is removed from the user’s "Apps Using Apple ID" list? API Availability after Removal Once an app is no longer available on the App Store (or its record is deleted in App Store Connect), is the auth/revoke REST API still accessible? I want to ensure that a developer can still perform necessary privacy clean-up tasks (revoking consent) even if the app is not currently distributed. Specific User Impacts of Non-Revocation If we do not call the revocation API, besides the app remaining in the "Sign in with Apple" list, what are the specific consequences for the user? Thank you for your guidance.
Replies
0
Boosts
0
Views
384
Activity
Jan ’26
How to handle Sign in with Apple Server to server Notifications?
Hello. When a user revokes Apple Login authorization, I am expecting a webhook to be delivered to our configured endpoint, but I currently not receiving any at all. So I have some questions: Should the revoke event webhook be delivered in real-time? If it is not real-time, when is the webhook supposed to be sent? If my server fails to respond to the webhook request, does Apple retry the delivery? (Actually I couldn't find how to response in this scenario, but if I can) Thanks in advance.
Replies
1
Boosts
0
Views
483
Activity
Jan ’26
AKAuthenticationError Code=-7026
I want to add the "Sign In with Apple" feature to my iPadOS application. I've already done the following: Include com.apple.developer.applesignin in mobileprovision Include com.apple.developer.applesignin in entitlements However, I'm getting the following errors: `Authorization failed: Error Domain=AKAuthenticationError Code=-7026 "(null)" UserInfo={AKClientBundleID=xxxx} LaunchServices: store (null) or url (null) was nil: Error Domain=NSOSStatusErrorDomain Code=-54 "process may not map database" UserInfo={_LSLine=72, _LSFunction=_LSServer_GetServerStoreForConnectionWithCompletionHandler, _LSFile=LSDReadService.mm, NSDebugDescription=process may not map database} Attempt to map database failed: permission was denied. This attempt will not be retried. Failed to initialize client context with error Error Domain=NSOSStatusErrorDomain Code=-54 "process may not map database" UserInfo={_LSLine=72, _LSFunction=_LSServer_GetServerStoreForConnectionWithCompletionHandler, _LSFile=LSDReadService.mm, NSDebugDescription=process may not map database} Failed to get application extension record: Error Domain=NSOSStatusErrorDomain Code=-54 "(null)" ASAuthorizationController credential request failed with error: Error Domain=com.apple.AuthenticationServices.AuthorizationError Code=1000 "(null)" ` What is this problem? How can I solve it? Hoping someone can help, thank you!
Replies
1
Boosts
0
Views
430
Activity
Jan ’26
Missing "is_private_email" claim in ID Token for Hide My Email users
Hello, I am implementing "Sign in with Apple" on my backend and validating the Identity Token (JWT) received from the client. I noticed that for some users who choose the "Hide My Email" option, the is_private_email claim is missing from the ID Token payload, even though the email address clearly belongs to the private relay domain (@privaterelay.appleid.com). Here is an example of the decoded payload I received: { "iss": "https://appleid.apple.com", "aud": "com.platform.elderberry.new.signinwithapple", "exp": 1764402438, "iat": 1764316038, "sub": "000851.86193ef81ad247feb673746c19424f28.0747", "c_hash": "3FAJNf4TILzUgo_YFe4E0Q", "email": "x8sqp2dgvv@privaterelay.appleid.com", "email_verified": true, "auth_time": 1764316038, "nonce_supported": true // "is_private_email": true <-- This field is missing } My Questions: Is the is_private_email claim considered optional in the ID Token? Is it safe and recommended to rely solely on the email domain suffix (@privaterelay.appleid.com) to identify if a user is using a private email? Any insights or official references would be appreciated. Thanks.
Replies
1
Boosts
0
Views
653
Activity
Jan ’26
Missing "is_private_email" claim in ID Token for Hide My Email users
Hello, I am implementing "Sign in with Apple" on my backend and validating the Identity Token (JWT) received from the client. I noticed that for some users who choose the "Hide My Email" option, the is_private_email claim is missing from the ID Token payload, even though the email address clearly belongs to the private relay domain (@privaterelay.appleid.com). Here is an example of the decoded payload I received: { "iss": "https://appleid.apple.com", "aud": "xxx", "exp": 1764402438, "iat": 1764316038, "sub": "xxxxxxxx", "c_hash": "3FAJNf4TILzUgo_YFe4E0Q", "email": "xxx@privaterelay.appleid.com", "email_verified": true, "auth_time": 1764316038, "nonce_supported": true // "is_private_email": true <-- This field is missing } My Questions: Is the is_private_email claim considered optional in the ID Token? Is it safe and recommended to rely solely on the email domain suffix (@privaterelay.appleid.com) to identify if a user is using a private email? Any insights or official references would be appreciated. Thanks.
Replies
1
Boosts
0
Views
355
Activity
Jan ’26
Apple Login using Firebase on EXPO(fro android and ios)
Hello I am trying to release an application using EXPO ROUTER + EXPO RN WEB. I am trying to implement Apple Login using Firebase. I have already put necessary info in both App Store Connect and Firebas console. Now I am so confused what I have to do next. What are some resource I could use or tips you could possibly give me when making apple login available using firebase. Pleas all helps are welcomed and needed
Replies
1
Boosts
0
Views
303
Activity
Jan ’26
Discrepancy in Sign in with Apple Notification Type: account-deleted vs account-delete
Hi everyone, I am currently implementing Server-to-Server Notifications for Sign in with Apple. I’ve encountered a discrepancy between the official documentation and the actual payload I received, and I would like to clarify which one is correct. The Situation: I triggered an account deletion event via privacy.apple.com to test the notification flow. When my server received the notification, the type field in the JSON payload was account-deleted (past tense). The Issue: According to the official Apple documentation, the event type is listed as account-delete (present tense). Here is the discrepancy I am observing: Documentation: account-delete Actual Payload: account-deleted My Question: Is the documentation outdated, or is this a known inconsistency? Should I handle both strings (account-delete and account-deleted) in my backend logic to be safe, or is account-deleted the new standard? Any insights or confirmation from those who have implemented this would be greatly appreciated. Thanks!
Replies
2
Boosts
0
Views
483
Activity
Jan ’26
Not receiving Sign in with Apple Server-to-Server Notifications despite correct configuration
I received a notification stating that we need to register a server-to-server notification endpoint to handle the following three events: Changes in email forwarding preferences. Account deletions in your app. Permanent Apple Account deletions. However, even though we have registered the API endpoint under our Identifier configuration, it appears that we are not receiving any API calls when these events trigger. I honestly have no idea what’s going wrong. I’ve checked our WAF logs and there’s no trace of any incoming traffic at all. Is it possible that Apple hasn't started sending these notifications yet, or is there something I might be missing? I’m stuck and don’t know how to resolve this. I would really appreciate any help or insights you could share. Thank you.
Replies
0
Boosts
0
Views
259
Activity
Jan ’26
Not receiving Sign in with Apple Server-to-Server Notifications despite correct configuration
I received a notification stating that we need to register a server-to-server notification endpoint to handle the following three events: Changes in email forwarding preferences. Account deletions in your app. Permanent Apple Account deletions. However, even though we have registered the API endpoint under our Identifier configuration, it appears that we are not receiving any API calls when these events trigger. I honestly have no idea what’s going wrong. I’ve checked our WAF logs and there’s no trace of any incoming traffic at all. Is it possible that Apple hasn't started sending these notifications yet, or is there something I might be missing? I’m stuck and don’t know how to resolve this. I would really appreciate any help or insights you could share. Thank you.
Replies
0
Boosts
0
Views
166
Activity
Jan ’26
Apple Sign-In Fails with Mysterious 404 Error on Non-Existent /appleauth/auth/federate Endpoint
I'm implementing Apple Sign-In in my Next.js application with a NestJS backend. After the user authenticates with Apple, instead of redirecting to my configured callback URL, the browser makes a POST request to a mysterious endpoint /appleauth/auth/federate that doesn't exist in my codebase, resulting in a 404 error. Tech Stack Frontend: Next.js 16.0.10, React 19.2.0 Backend: NestJS with Passport (using @arendajaelu/nestjs-passport-apple) Frontend URL: https://myapp.example.com Backend URL: https://api.example.com Apple Developer Configuration Service ID: (configured correctly in Apple Developer Console) Return URL (only one configured): https://api.example.com/api/v1/auth/apple/callback Domains verified in Apple Developer Console: myapp.example.com api.example.com example.com Backend Configuration NestJS Controller (auth.controller.ts): typescript @Public() @Get('apple') @UseGuards(AuthGuard('apple')) async appleAuth() { // Initiates Apple OAuth flow } @Public() @Post('apple/callback') // Changed from @Get to @Post for form_post @UseGuards(AuthGuard('apple')) async appleAuthCallback(@Req() req: any, @Res() res: any) { const result = await this.authService.socialLogin(req.user, ipAddress, userAgent); // Returns HTML with tokens that uses postMessage to send to opener window } Environment Variables: typescript APPLE_CLIENT_ID=<service_id> APPLE_TEAM_ID=<team_id> APPLE_KEY_ID=<key_id> APPLE_PRIVATE_KEY_PATH=./certs/AuthKey_XXX.p8 APPLE_CALLBACK_URL=https://api.example.com/api/v1/auth/apple/callback FRONTEND_URL=https://myapp.example.com The passport-apple strategy uses response_mode: 'form_post', so Apple POSTs the authorization response to the callback URL. Frontend Implementation Next.js API Route (/src/app/api/auth/apple/route.js): javascript export async function GET(request) { const backendUrl = new URL(`${API_URL}/auth/apple`); const response = await fetch(backendUrl.toString(), { method: "GET", headers: { "Content-Type": "application/json", }, }); const responseText = await response.text(); return new NextResponse(responseText, { status: response.status, headers: { "Content-Type": contentType || "text/html" }, }); } Frontend Auth Handler: javascript export const handleAppleLogin = (router, setApiError) => { const frontendUrl = window?.location?.origin; // Opens popup to /api/auth/apple window.open( `${frontendUrl}/api/auth/apple`, "appleLogin", "width=500,height=600" ); }; The Problem Expected Flow: User clicks "Login with Apple" Frontend opens popup → https://myapp.example.com/api/auth/apple Frontend proxies to → https://api.example.com/api/v1/auth/apple Backend redirects to Apple's authentication page User authenticates with Apple ID Apple POSTs back to → https://api.example.com/api/v1/auth/apple/callback Backend processes and returns success HTML Actual Behavior: After step 5 (user authentication with Apple), instead of Apple redirecting to my callback URL, the browser makes this unexpected request: POST https://myapp.example.com/appleauth/auth/federate?isRememberMeEnabled=false Status: 404 Not Found Request Payload: json { "accountName": "user@example.com", "rememberMe": false } Network Tab Analysis From Chrome DevTools, the call stack shows: send @ app.js:234 ajax @ app.js:234 (anonymous) @ app.js:10 Ee.isFederated @ app.js:666 _callAuthFederate @ app.js:666 The Ee.isFederated and _callAuthFederate functions appear to be minified library code, but I cannot identify which library. What I've Verified ✅ The /appleauth/auth/federate endpoint does not exist anywhere in my codebase: bash grep -r "appleauth" src/ # No results grep -r "federate" src/ # No results ✅ Apple Developer Console shows only ONE Return URL configured (verified multiple times) ✅ Changed callback route from @Get to @Post to handle form_post response mode ✅ Rebuilt frontend completely multiple times: bash rm -rf .next npm run build ✅ Tested in: Incognito/Private browsing mode Different browsers (Chrome, Firefox, Safari) Different devices After clearing all cache and cookies ✅ No service workers registered in the application ✅ No external <script> tags or CDN libraries loaded ✅ package.json contains no AWS Amplify, Auth0, Cognito, or similar federated auth libraries ✅ Checked layout.js and all root-level files - no external scripts Additional Context Google Sign-In works perfectly fine using the same approach The mysterious endpoint uses a different path structure (/appleauth/ vs /api/auth/) The call appears to originate from client-side JavaScript (based on the call stack) The app.js file with the mysterious functions is the built Next.js bundle Questions Where could this /appleauth/auth/federate endpoint be coming from? Why is the browser making this POST request instead of following Apple's redirect to my configured callback URL? Could this be related to the response_mode: 'form_post' in the Apple Passport strategy? Is there something in the Apple Developer Primary App ID configuration that could trigger this behavior? Could this be a Next.js build artifact or some hidden dependency? The mysterious call stack references (Ee.isFederated, _callAuthFederate) suggest some library is intercepting the Apple authentication flow, but I cannot identify what library or where it's being loaded from. The minified function names suggest federated authentication, but I have no such libraries in my dependencies. Has anyone encountered similar issues with Apple Sign-In where an unexpected endpoint is being called?
Replies
0
Boosts
0
Views
533
Activity
Jan ’26
Sign in with Apple Server to Server Notification Documentation
Is there any documentation about the server to server notification, specifically what sort of data Apple servers send to our server when there is an update to users who used Sign in with Apple?
Replies
9
Boosts
2
Views
7.6k
Activity
Dec ’25
Questions about user impact and best practices for rotating the private key used for Sign in with Apple
Hi, We are operating a service that uses Sign in with Apple for user registration and login. As part of our security incident response and periodic security improvements, we are planning to rotate the private key used to generate the client secret (JWT) for Sign in with Apple. I have read the Human Interface Guidelines and the AuthenticationServices documentation, but I could not find a clear description of the behavior and user impact when rotating this private key. I would like to ask the following questions: Background: We issue a Sign in with Apple private key (with a Key ID) in our Apple Developer account. Our server uses this private key to generate the client secret (JWT). This is used for Sign in with Apple login on our web / mobile app. We are planning to invalidate the existing private key and switch to a newly issued one. Questions: Impact on existing logged-in sessions Will rotating the private key force already logged-in users (who previously signed in with Apple) to be logged out from our service? Can the user identifier (such as the "sub" claim) for existing Sign in with Apple users change due to key rotation? Recommended frequency and best practices Does Apple recommend rotating this private key only when it is compromised, or on a regular basis? If there are any official documents or examples that describe how to safely perform key rotation in production, we would appreciate a pointer. Impact on marketing / analytics We are using user IDs (linked via Sign in with Apple) for analytics and marketing attribution. Is there any expected impact on such use cases caused by rotating the private key? For example, is there any possibility that user identifiers change as a result of key rotation, or anything we should be careful about from a data linkage perspective? Our goal is to rotate the private key in a secure way without causing service downtime, mass logouts, or loss of account linkage. If there is already an official document that covers this, please let me know the URL. Thank you in advance.
Replies
0
Boosts
0
Views
136
Activity
Dec ’25
How to collect a user's real email address when using Sign in with Apple and Private Relay?
I’m using Sign in with Apple in my iOS app. When a user chooses “Hide My Email”, I receive the @privaterelay.appleid.com relay address. For marketing reasons, I would prefer to have the user’s real email address instead of the relay email. I want to stay compliant with App Store Review and the Sign in with Apple design/UX requirements. My questions are: Is it allowed to force the user (as part of the registration process) to provide their real email address, even if they chose “Hide My Email” during Sign in with Apple? Are there any specific App Store Review guidelines that forbid: Blocking sign up or access to features if the user keeps the relay email, or Showing a strong prompt like “We can’t log you in unless you share your real email”? What is the recommended, compliant pattern for collecting a “real” email when using Sign in with Apple + Private Relay? I’d appreciate any official clarification or examples of what App Review considers acceptable vs. reject-worthy here.
Replies
1
Boosts
0
Views
207
Activity
Nov ’25
App Transfer and User Migration - Questions on Apple Sign-In Token Behavior and Testing Process
Hi Apple Developer Community, We have carefully reviewed the documentation on App Transfer and User Migration, but we still have a few unresolved questions regarding Apple Sign-In token behavior and testing strategies. Would appreciate any guidance! Token Behavior for Pre-Transfer App Versions After the app transfer: If a user logs in via an existing pre-transfer version of the app (published under Team A before transfer), will the Apple Sign-In token’s sub (or private email) switch to new value tie to Team B, or unchanged? This is critical for our user migration plan. Preserving sub Across Transfers (Internal Team Transfer) Since our app-transfer is an internal transfer (no change in app ownership outside our organization), is there a way to retain the original sub value(or private email) for users after the transfer? We are concerned that Apple Sign-In errors during the app transfer process may negatively impact user experience. Testing the Transfer Process Safely We’d like to simulate the app transfer and user migration process in a sandbox/test environment before executing it in production. Is there a way to test app transfers without affecting live users? (e.g., a staging mode for transfers) Thank you for your expertise! Any insights would be invaluable.
Replies
1
Boosts
0
Views
375
Activity
Nov ’25
Migrating Sign in with Apple users for an app transfer
Question detail Dear Apple Developer Technical Support, We are currently following the official Apple documentation “TN3159: Migrating Sign in with Apple users for an app transfer” to carry out a Sign in with Apple user migration after successfully transferring several apps to a new developer account. Here is a summary of our situation: Under the original Apple developer account, we had five apps using Sign in with Apple, grouped under a shared primary app using App Grouping. Recently, we transferred three of these apps to our new Apple developer account via App Store Connect. After the transfer, these three apps are no longer associated with the original primary App ID. We reconfigured individual Services IDs for each app in the new account and enabled Sign in with Apple for each. More than 24 hours have passed since the app transfer was completed. Now we are attempting to follow the migration process to restore user access via the user.migration flow. Specifically, we are using the following script to request an Apple access token: url = "https://appleid.apple.com/auth/token" headers = {"Content-Type": "application/x-www-form-urlencoded"} data = { "grant_type": "client_credentials", "scope": "user.migration", "client_id": "com.game.friends.ios.xxxx", # New Primary ID in the new account "client_secret": "<JWT signed with new p8 key>" } response = requests.post(url, headers=headers, data=data) However, the API response consistently returns: { "error": "invalid_client" } We have verified that the following configurations are correct: The client_secret is generated using the p8 key from the new account, signed with ES256 and correct key_id, team_id, and client_id. The client_id corresponds to the Services ID created in the new account and properly associated with the migrated app. The scope is set to user.migration. The JWT payload contains correct iss, sub, and aud values as per Apple documentation. The app has been fully transferred and reconfigured more than 24 hours ago. Problem Summary & Request for Support: According to Apple’s official documentation: “After an app is transferred, Apple updates the Sign in with Apple configuration in the background. This can take up to 24 hours. During this time, attempts to authenticate users or validate tokens may fail.” However, we are still consistently receiving invalid_client errors after the 24-hour waiting period. We suspect one of the following issues: The transferred apps may still be partially associated with the original App Grouping or primary App ID. Some Sign in with Apple configuration in Apple’s backend may not have been fully updated after the transfer. Or the Services ID is not yet fully operational for the transferred apps in the new account. We kindly request your assistance to: Verify whether the transferred apps have been completely detached from the original App Grouping and primary App ID. Confirm whether the new Services IDs under the new account are fully functional and eligible for Sign in with Apple with user.migration scope. Help identify any remaining configuration or migration issues that may cause the invalid_client error. If necessary, assist in manually ungrouping or clearing any residual App Grouping relationships affecting the new environment. We have also generated and retained the original transfer_sub identifiers and are fully prepared to complete the sub mapping once the user.migration flow becomes functional. Thank you very much for your time and support!
Replies
2
Boosts
0
Views
580
Activity
Nov ’25
Sending email to private.email from transferred app
Goal I want to reply to feedback from customers who signed up using a private.relay account. Problem I am getting this error when sending an email: Reporting-MTA: dns; mailfout.stl.internal X-Postfix-Queue-ID: B87481D0015B X-Postfix-Sender: rfc822; hello@mydomain.com Arrival-Date: Fri, 7 Nov 2025 03:37:29 -0500 (EST) Final-Recipient: rfc822; xxxx@privaterelay.appleid.com Original-Recipient: rfc822;xxxx@privaterelay.appleid.com Action: failed Status: 5.1.1 Remote-MTA: dns; smtp3.privaterelay.appleid.com Diagnostic-Code: smtp; 550 5.1.1 <hello@mydomain.com>: unauthorized sender What have I done? I have configured mydomain.com in the Email Configuration Service inside of apple, as well as the email hello@mydomain.com. Using https://www.mail-tester.com/, I could confirm that the - [SPF] Your server 202.12.124.158 is authorized to use hello@mydomain.com - Your DKIM signature is valid - Your message passed the DMARC test My hunch This app was transferred and the previous owner did not have the email configuration set up. The emails I am writing messages to signed up at that time. Questions: If I rescue the old account and set up the email configuration, would it work? Is there any other tip I could try to apply?
Replies
1
Boosts
0
Views
150
Activity
Nov ’25