Dive into the technical aspects of audio on your device, including codecs, format support, and customization options.

Audio Documentation

Posts under Audio subtopic

Post

Replies

Boosts

Views

Activity

How to use the SpeechDetector Module
I am trying to use SpeechDetector Module in Speech framework along with SpeechTranscriber. and it is giving me an error Cannot convert value of type 'SpeechDetector' to expected element type 'Array.ArrayLiteralElement' (aka 'any SpeechModule') Below is how I am using it let speechDetector = Speech.SpeechDetector() let transcriber = SpeechTranscriber(locale: Locale.current, transcriptionOptions: [], reportingOptions: [.volatileResults], attributeOptions: [.audioTimeRange]) speechAnalyzer = try SpeechAnalyzer(modules: [transcriber,speechDetector])
4
2
491
Aug ’25
ShazamKit Background Operation Broken on iOS 18 - SHManagedSession Stops Working After ~20 Seconds
Your draft looks great! Here's a refined version with the iOS 17 comparison emphasized and slightly better flow: Hi Apple Engineers and fellow developers, I'm experiencing a critical regression with ShazamKit's background operation on iOS 18. ShazamKit's SHManagedSession stops identifying songs in the background after approximately 20 seconds on iOS 18, while the exact same code works perfectly on iOS 17. The behavior is consistent: the app works perfectly in the foreground, but when backgrounded or device is locked, it initially works for about 20 seconds then stops identifying new songs. The microphone indicator remains active suggesting audio access is maintained, but ShazamKit doesn't send identified songs in the background until you open the app again. Detection immediately resumes when bringing the app to foreground. My technical setup uses SHManagedSession for continuous matching with background modes properly configured in Info.plist including audio mode, and Background App Refresh enabled. I've tested this on physical devices running iOS 18.0 through 18.5 with the same results across all versions. The exact same code running on iOS 17 devices works flawlessly in the background. To reproduce: initialize SHManagedSession and start matching, begin song identification in foreground, background the app or lock device, play different songs which are initially detected for about 20 seconds, then after the timeout period new songs are no longer identified until you bring the app to foreground. This regression has impacted my production app as users who rely on continuous background music identification are experiencing a broken feature. I submitted this as Feedback ID FB15255903 last September with no solution so far. I've created a minimal demo project that reproduces this issue: https://github.com/tfmart/ShazamKitBackground Has anyone else experienced this ShazamKit background regression on iOS 18? Are there any known workarounds or alternative approaches? Given the time this issue has persisted, could we please get acknowledgment of this regression, expected timeline for a fix, or any recommended workarounds? Testing environment is Xcode 16.0+ on iOS 18.0-18.5 across multiple physical device models. Any guidance would be greatly appreciated.
1
0
400
Jan ’26
MIDI output form Standalone MIDI Processor Demo App to DAW
I am trying to get MIDI output from the AU Host demo app using the recent MIDI processor example. The processor works correctly in Logic Pro, but I cannot send MIDI from the AUv3 extension in standalone mode using the default host app to another program (e.g., Ableton). The MIDI manager, which is part of the standalone host app, works fine, and I can send MIDI using it directly—Ableton receives it without issues. I have already set the midiOutputNames in the extension, and the midiOutBlock is mapped. However, the MIDI data from the AUv3 extension does not reach Ableton in standalone mode. I suspect the issue is that midiOutBlock might never be called in the plugin, or perhaps an input to the plugin is missing, which prevents it from sending MIDI. I am currently using the default routing. I have modified the MIDI manager such that it works well as described above. Here is a part of my code for SimplePlayEngine.swift and my MIDIManager.swift for reference: @MainActor @Observable public class SimplePlayEngine { private let midiOutBlock: AUMIDIOutputEventBlock = { sampleTime, cable, length, data in return noErr } var scheduleMIDIEventListBlock: AUMIDIEventListBlock? = nil public init() { engine.attach(player) engine.prepare() setupMIDI() } private func setupMIDI() { if !MIDIManager.shared.setupPort(midiProtocol: MIDIProtocolID._2_0, receiveBlock: { [weak self] eventList, _ in if let scheduleMIDIEventListBlock = self?.scheduleMIDIEventListBlock { _ = scheduleMIDIEventListBlock(AUEventSampleTimeImmediate, 0, eventList) } }) { fatalError("Failed to setup Core MIDI") } } func initComponent(type: String, subType: String, manufacturer: String) async -> ViewController? { reset() guard let component = AVAudioUnit.findComponent(type: type, subType: subType, manufacturer: manufacturer) else { fatalError("Failed to find component with type: \(type), subtype: \(subType), manufacturer: \(manufacturer))" ) } do { let audioUnit = try await AVAudioUnit.instantiate( with: component.audioComponentDescription, options: AudioComponentInstantiationOptions.loadOutOfProcess) self.avAudioUnit = audioUnit self.connect(avAudioUnit: audioUnit) return await audioUnit.loadAudioUnitViewController() } catch { return nil } } private func startPlayingInternal() { guard let avAudioUnit = self.avAudioUnit else { return } setSessionActive(true) if avAudioUnit.wantsAudioInput { scheduleEffectLoop() } let hardwareFormat = engine.outputNode.outputFormat(forBus: 0) engine.connect(engine.mainMixerNode, to: engine.outputNode, format: hardwareFormat) do { try engine.start() } catch { isPlaying = false fatalError("Could not start engine. error: \(error).") } if avAudioUnit.wantsAudioInput { player.play() } isPlaying = true } private func resetAudioLoop() { guard let avAudioUnit = self.avAudioUnit else { return } if avAudioUnit.wantsAudioInput { guard let format = file?.processingFormat else { fatalError("No AVAudioFile defined.") } engine.connect(player, to: engine.mainMixerNode, format: format) } } public func connect(avAudioUnit: AVAudioUnit?, completion: @escaping (() -> Void) = {}) { guard let avAudioUnit = self.avAudioUnit else { return } engine.disconnectNodeInput(engine.mainMixerNode) resetAudioLoop() engine.detach(avAudioUnit) func rewiringComplete() { scheduleMIDIEventListBlock = auAudioUnit.scheduleMIDIEventListBlock if isPlaying { player.play() } completion() } let hardwareFormat = engine.outputNode.outputFormat(forBus: 0) engine.connect(engine.mainMixerNode, to: engine.outputNode, format: hardwareFormat) if isPlaying { player.pause() } let auAudioUnit = avAudioUnit.auAudioUnit if !auAudioUnit.midiOutputNames.isEmpty { auAudioUnit.midiOutputEventBlock = midiOutBlock } engine.attach(avAudioUnit) if avAudioUnit.wantsAudioInput { engine.disconnectNodeInput(engine.mainMixerNode) if let format = file?.processingFormat { engine.connect(player, to: avAudioUnit, format: format) engine.connect(avAudioUnit, to: engine.mainMixerNode, format: format) } } else { let stereoFormat = AVAudioFormat(standardFormatWithSampleRate: hardwareFormat.sampleRate, channels: 2) engine.connect(avAudioUnit, to: engine.mainMixerNode, format: stereoFormat) } rewiringComplete() } } and my MIDI Manager @MainActor class MIDIManager: Identifiable, ObservableObject { func setupPort(midiProtocol: MIDIProtocolID, receiveBlock: @escaping @Sendable MIDIReceiveBlock) -> Bool { guard setupClient() else { return false } if MIDIInputPortCreateWithProtocol(client, portName, midiProtocol, &port, receiveBlock) != noErr { return false } for source in self.sources { if MIDIPortConnectSource(port, source, nil) != noErr { print("Failed to connect to source \(source)") return false } } setupVirtualMIDIOutput() return true } private func setupVirtualMIDIOutput() { let virtualStatus = MIDISourceCreate(client, virtualSourceName, &virtualSource) if virtualStatus != noErr { print("❌ Failed to create virtual MIDI source: \(virtualStatus)") } else { print("✅ Created virtual MIDI source: \(virtualSourceName)") } } func sendMIDIData(_ data: [UInt8]) { print("hey") var packetList = MIDIPacketList() withUnsafeMutablePointer(to: &packetList) { ptr in let pkt = MIDIPacketListInit(ptr) _ = MIDIPacketListAdd(ptr, 1024, pkt, 0, data.count, data) if virtualSource != 0 { let status = MIDIReceived(virtualSource, ptr) if status != noErr { print("❌ Failed to send MIDI data: \(status)") } else { print("✅ Sent MIDI data: \(data)") } } } } }
0
0
563
Aug ’25
CoreAudio server plugin gaining write access with SystemConfiguration.framework functions
Hi, our CourAudio server plugin utilizes the SystemConfiguration.framework to store and restore specific shared system wide settings. While our application can authenticate to utilize the SystemConfiguration.framework to gain write access to the shared configuration settings the CoreAudio server plugin obviously can't have any user interaction and therefor does not authenticate. Is it possible to authenticate the CoreAudio server plugin to gain write permissions? Are there any entitlements or other means that would allow this? Thanks!
2
0
192
Apr ’25
Accessory not supported by this device
Hi, I've had a new deck installed in my car for about 1.5 weeks. I'm having compatibility issues with my 15PM. It happens both wired and wirelessly, I get the error "Accessory not supported by this device". It used to happen all the time, now it's 50/50. Sometimes it works. I've removed and added Bluetooth multiple times on phone and deck, I bought a belkin usb-c to usb-a cable today and it seems to fix it but the problem comes back. I've changed the setting "FaceID and passcode-allow access when locked-accessories." The car stereo guy reckons it's definitely an issue with the phone not the deck, I'm inclined to believe him since the error states "by this device". Any advice appreciated.
0
0
223
Aug ’25
Number of songs in the Apple Music Feed
Hello, I'm evaluating the Apple Music Feed dataset and I noticed that the total number of songs available in the feed is too small. As of today, the number of objects returned in each feed is: 51,198,712 albums 23,093,698 artists 173,235,315 songs This gives an average of 3.38 songs per album which is quite low. Also, iterating on the data I see that there are albums referencing songs that don't exist in the songs feed. I would like to know: Is the feed data incomplete? If so, in what situations an object may be missing from the feed? Thank you in advance!
0
0
315
Aug ’25
How to get PID from AudioObjectID on macOS pre Sonoma
3 I am working on an application to get when input audio device is being used. Basically I want to know the application using the microphone (built-in or external) This app runs on macOS. For Mac versions starting from Sonoma I can use this code: int getAudioProcessPID(AudioObjectID process) { pid_t pid; if (@available(macOS 14.0, *)) { constexpr AudioObjectPropertyAddress prop { kAudioProcessPropertyPID, kAudioObjectPropertyScopeGlobal, kAudioObjectPropertyElementMain }; UInt32 dataSize = sizeof(pid); OSStatus error = AudioObjectGetPropertyData(process, &prop, 0, nullptr, &dataSize, &pid); if (error != noErr) { return -1; } } else { // Pre sonoma code goes here } return pid; } which works. However, kAudioProcessPropertyPID was added in macOS SDK 14.0. Does anyone know how to achieve the same functionality on previous versions?
1
0
384
Sep ’25
Potential Documentation Error in kAudioAggregateDevicePropertyTapList Sample Code
Hi, I believe I've found a potential error in the sample code on the documentation page for creating and using a process tap with an aggregate device. The issue is in the section explaining how to add a tap to the aggregate device. I have already filed a Feedback Assistant ticket on this (ID: FB17411663) but haven't heard back for months. Capturing system audio with Core Audio taps The sample code for modifying the kAudioAggregateDevicePropertyTapList incorrectly uses the tapID as the target AudioObjectID when calling AudioObjectSetPropertyData. // (Code to get the list and potentially modify listAsArray) if var listAsArray = list as? [CFString] { // ... (modification logic) ... // Set the list back on the aggregate device. <--- The comment is correct list = listAsArray as CFArray _ = withUnsafeMutablePointer(to: &list) { list in // INCORRECT: This call uses tapID as the target object. AudioObjectSetPropertyData(tapID, &propertyAddress, 0, nil, propertySize, list) } } The kAudioAggregateDevicePropertyTapList is a property that belongs to the aggregate device, not the individual tap. Therefore, to set this property, the AudioObjectSetPropertyData function must target the AudioObjectID of the aggregate device itself. Using tapID as the first argument is logically incorrect for this operation and will not update the aggregate device as intended. Furthermore, the preceding AudioObjectGetPropertyData call to fetch the list also appears to use the incorrect tapID as its target in the sample. The AudioObjectID for both getting and setting this property should be the ID of the aggregate device. _ = AudioObjectGetPropertyData(aggregateDeviceID, &propertyAddress, 0, nil, &propertySize, &list) _ = AudioObjectSetPropertyData(aggregateDeviceID, &propertyAddress, 0, nil, propertySize, newList) Thank you!
0
0
505
Sep ’25
MusicKit - Skipping Forwards or Backwards does not update
Hello everyone, I am working on an app that allows you to review your own music using Apple Music. Currently I am running into an issue with the skipping forwards and backwards outside of the app. How it should work: When skipping forward or backwards on the lock or home screen of an iPhone, the next or previous song on an album should play and the information should change to reflect that in the app. If you play a song in Apple Music, you can see a Now Playing view in the lock screen. When you skip forward or backwards, it will do either action and it would reflect that when you see a little frequency icon on artwork image of a song. What it's doing: When skipping forward or backwards on the lock or home screen of an iPhone, the next or previous song is reflected outside of the app, but not in the app. When skipping a song outside of the app, it works correctly to head to the next song. But when I return to the app, it is not reflected NOTE: I am not using MusicKit variables such as Track, Album to display the songs. Since I want to grab the songs and review them I need a rating so I created my own that grabs the MusicItemID, name, artist(s), etc. NOTE: I am using ApplicationMusicPlayer.shared Is there a way to get the song to reflect in my app? (If its easier, a simple example of it would be nice. No need to create an entire xprod file)
0
0
107
Apr ’25
Play Audio and Recognize Speech in Car
Hello, I'm trying to determine the best/recommended AVAudioSession configuration (i.e category, mode, and options) for the following use-case. Essentially, I'd like to switch between periods of playing an audio file and then recognizing speech. The audio file is typically speech and I don't intend for playback and speech recognition to occur simultaneously. I'd like for the user to sill be able to interact with Siri and I'd like for it to work with CarPlay where navigation prompts can occur. I would assume the category to use is 'playAndRecord', but I'm not sure if it's better to just set that once for the entire lifecycle, or set to 'playback' for audio file playback and then switch to 'playAndRecord' for speech recognition . I'm also not sure on the best 'mode' and 'options' to set. Any suggestions would be appreciated. Thanks.
0
0
615
Sep ’25
iOS 17 camera capture assertions and issues
Hello, Starting in iOS 17, our application started having some issue publishing to our video session. More specifically the video capture seems to be broken in some, but not all sessions. What's troubling is that we're seeing that it fails consistently every 4 sessions. It also fails silently, without reporting any problems to the app. We only notice that there are no frames being rendered or sent to the remote devices. Here's what shows-up in the console: <<<< FigCaptureSourceRemote >>>> Fig assert: "! storage->connectionDied" at bail (FigCaptureSourceRemote.m:235) - (err=0) <<<< FigCaptureSourceRemote >>>> Fig assert: "err == 0 " at bail (FigCaptureSourceRemote.m:253) - (err=-16453) Anyone seeing this? Any idea what could be the cause? Our sessions work perfectly on iOS16 and below. Thanks
3
1
1.4k
Oct ’25
Mac OS Tahoe 26.0 (25A354) Sound Glitches When opening the simulator app
Hey there, I just upgraded to Mac OS Tahoe ,son an apple MacBook Pro 2019 16inch. am using IntellijIDEA and Flutter to develop a mobile app which I test on the simulator app running iOS 18.4 . the issue: when I start the simulator app. ( while in the loading phase and in the operation phase as well ), the audio from an already open YouTube tab on safari (this happens on chrome browser as well). the sound glitches and becomes Noise. a fix I found online is to kill the audio deamon on Mac OS, This works using the command: "sudo killall coreaudiod" this kills the audio process, (while the emulator is operational), then the macOS restarts the audio deamon then the audio works fine alongside with the simulator being open. I just want to ask is there a permanent fix for this? is Apple working on a fix for this in the upcoming update?
3
5
1.3k
Oct ’25
AVSpeechSynthesisVoices available on device
Hello there! Is there any list of voices that are always available on iOS/iPadOS devices? It seems that AVSpeechSynthesisVoice(identifier: "com.apple.voice.compact.en-US.Samantha") is always available on all devices. I thought that AVSpeechSynthesisVoice(identifier: "com.apple.ttsbundle.siri_Nicky_en-US_compact") and AVSpeechSynthesisVoice(identifier: "com.apple.ttsbundle.siri_Aaron_en-US_compact") were available by default on certain newer devices. Is this true? I also noticed that on the same iPad where I was using those 2 voices (Nicky and Aaron) - when I updated to the iPadOS 26 beta, those voices were no longer available. Any information you can share about which voices should be reliably available on which devices would be extremely helpful for our development. Thanks so much!
0
0
193
Jun ’25
Problems recording audio on Tahoe 26.0 (Intel only)
I have some tried-and-tested code that records and plays back audio via AUHAL which breaks on Tahoe on Intel. The same code works fine on Sequioa and also works on Tahoe on Apple Silicon. To start with something simple, the following code to request access to the Microphone doesn't work as it should: bool RequestMicrophoneAccess () { __block AVAuthorizationStatus status = [AVCaptureDevice authorizationStatusForMediaType: AVMediaTypeAudio]; if (status == AVAuthorizationStatusAuthorized) return true; __block bool done = false; [AVCaptureDevice requestAccessForMediaType: AVMediaTypeAudio completionHandler: ^ (BOOL granted) { status = (granted) ? AVAuthorizationStatusAuthorized : AVAuthorizationStatusDenied; done = true; }]; while (!done) CFRunLoopRunInMode (kCFRunLoopDefaultMode, 2.0, true); return status == AVAuthorizationStatusAuthorized; } On Tahoe on Intel, the code runs to completion but granted is always returned as NO. Tellingly, the popup to ask the user to grant microphone access is never displayed, even though the app is not present in the Privacy pane and never appears there. On Apple Silicon, everything works fine. There are some other problems, but I'm hoping they have a common underlying cause and that the Apple guys can figure out what's wrong from the information in this post. I'd be happy to test any potential fix. Thanks.
2
0
456
Oct ’25
Audio session activation occasionally fails from CarPlay
I'm working on adding CarPlay support to an audio app and am running into an issue. Occasionally, when a user opens the app from CarPlay while the main app scene is either not connected or is currently in the background, I will receive an error when attempting to activate the audio session. The code below mimics my setup: do { try AVAudioSession.sharedInstance().setCategory(.playback, mode: .spokenAudio) try AVAudioSession.sharedInstance().setActive(true) } catch { print(error) // NSOSStatusErrorDomain - 560557684: Session activation failed } That error code maps to AVAudioSession.ErrorCode.cannotInterruptOthers. Once in this state, all subsequent attempts to play different pieces of content will fail. However, things will start working normally if the user opens the app on their phone and tries again from CarPlay (while the app is in the foreground on their phone). I'm not sure why it would behave this way and want to note that I do have the audio background mode capability enabled. Has anyone else encountered this? Are there any workarounds or changes I could make to prevent this from happening?
0
1
205
Apr ’25
How to use the SpeechDetector Module
I am trying to use SpeechDetector Module in Speech framework along with SpeechTranscriber. and it is giving me an error Cannot convert value of type 'SpeechDetector' to expected element type 'Array.ArrayLiteralElement' (aka 'any SpeechModule') Below is how I am using it let speechDetector = Speech.SpeechDetector() let transcriber = SpeechTranscriber(locale: Locale.current, transcriptionOptions: [], reportingOptions: [.volatileResults], attributeOptions: [.audioTimeRange]) speechAnalyzer = try SpeechAnalyzer(modules: [transcriber,speechDetector])
Replies
4
Boosts
2
Views
491
Activity
Aug ’25
ShazamKit Background Operation Broken on iOS 18 - SHManagedSession Stops Working After ~20 Seconds
Your draft looks great! Here's a refined version with the iOS 17 comparison emphasized and slightly better flow: Hi Apple Engineers and fellow developers, I'm experiencing a critical regression with ShazamKit's background operation on iOS 18. ShazamKit's SHManagedSession stops identifying songs in the background after approximately 20 seconds on iOS 18, while the exact same code works perfectly on iOS 17. The behavior is consistent: the app works perfectly in the foreground, but when backgrounded or device is locked, it initially works for about 20 seconds then stops identifying new songs. The microphone indicator remains active suggesting audio access is maintained, but ShazamKit doesn't send identified songs in the background until you open the app again. Detection immediately resumes when bringing the app to foreground. My technical setup uses SHManagedSession for continuous matching with background modes properly configured in Info.plist including audio mode, and Background App Refresh enabled. I've tested this on physical devices running iOS 18.0 through 18.5 with the same results across all versions. The exact same code running on iOS 17 devices works flawlessly in the background. To reproduce: initialize SHManagedSession and start matching, begin song identification in foreground, background the app or lock device, play different songs which are initially detected for about 20 seconds, then after the timeout period new songs are no longer identified until you bring the app to foreground. This regression has impacted my production app as users who rely on continuous background music identification are experiencing a broken feature. I submitted this as Feedback ID FB15255903 last September with no solution so far. I've created a minimal demo project that reproduces this issue: https://github.com/tfmart/ShazamKitBackground Has anyone else experienced this ShazamKit background regression on iOS 18? Are there any known workarounds or alternative approaches? Given the time this issue has persisted, could we please get acknowledgment of this regression, expected timeline for a fix, or any recommended workarounds? Testing environment is Xcode 16.0+ on iOS 18.0-18.5 across multiple physical device models. Any guidance would be greatly appreciated.
Replies
1
Boosts
0
Views
400
Activity
Jan ’26
MIDI output form Standalone MIDI Processor Demo App to DAW
I am trying to get MIDI output from the AU Host demo app using the recent MIDI processor example. The processor works correctly in Logic Pro, but I cannot send MIDI from the AUv3 extension in standalone mode using the default host app to another program (e.g., Ableton). The MIDI manager, which is part of the standalone host app, works fine, and I can send MIDI using it directly—Ableton receives it without issues. I have already set the midiOutputNames in the extension, and the midiOutBlock is mapped. However, the MIDI data from the AUv3 extension does not reach Ableton in standalone mode. I suspect the issue is that midiOutBlock might never be called in the plugin, or perhaps an input to the plugin is missing, which prevents it from sending MIDI. I am currently using the default routing. I have modified the MIDI manager such that it works well as described above. Here is a part of my code for SimplePlayEngine.swift and my MIDIManager.swift for reference: @MainActor @Observable public class SimplePlayEngine { private let midiOutBlock: AUMIDIOutputEventBlock = { sampleTime, cable, length, data in return noErr } var scheduleMIDIEventListBlock: AUMIDIEventListBlock? = nil public init() { engine.attach(player) engine.prepare() setupMIDI() } private func setupMIDI() { if !MIDIManager.shared.setupPort(midiProtocol: MIDIProtocolID._2_0, receiveBlock: { [weak self] eventList, _ in if let scheduleMIDIEventListBlock = self?.scheduleMIDIEventListBlock { _ = scheduleMIDIEventListBlock(AUEventSampleTimeImmediate, 0, eventList) } }) { fatalError("Failed to setup Core MIDI") } } func initComponent(type: String, subType: String, manufacturer: String) async -> ViewController? { reset() guard let component = AVAudioUnit.findComponent(type: type, subType: subType, manufacturer: manufacturer) else { fatalError("Failed to find component with type: \(type), subtype: \(subType), manufacturer: \(manufacturer))" ) } do { let audioUnit = try await AVAudioUnit.instantiate( with: component.audioComponentDescription, options: AudioComponentInstantiationOptions.loadOutOfProcess) self.avAudioUnit = audioUnit self.connect(avAudioUnit: audioUnit) return await audioUnit.loadAudioUnitViewController() } catch { return nil } } private func startPlayingInternal() { guard let avAudioUnit = self.avAudioUnit else { return } setSessionActive(true) if avAudioUnit.wantsAudioInput { scheduleEffectLoop() } let hardwareFormat = engine.outputNode.outputFormat(forBus: 0) engine.connect(engine.mainMixerNode, to: engine.outputNode, format: hardwareFormat) do { try engine.start() } catch { isPlaying = false fatalError("Could not start engine. error: \(error).") } if avAudioUnit.wantsAudioInput { player.play() } isPlaying = true } private func resetAudioLoop() { guard let avAudioUnit = self.avAudioUnit else { return } if avAudioUnit.wantsAudioInput { guard let format = file?.processingFormat else { fatalError("No AVAudioFile defined.") } engine.connect(player, to: engine.mainMixerNode, format: format) } } public func connect(avAudioUnit: AVAudioUnit?, completion: @escaping (() -> Void) = {}) { guard let avAudioUnit = self.avAudioUnit else { return } engine.disconnectNodeInput(engine.mainMixerNode) resetAudioLoop() engine.detach(avAudioUnit) func rewiringComplete() { scheduleMIDIEventListBlock = auAudioUnit.scheduleMIDIEventListBlock if isPlaying { player.play() } completion() } let hardwareFormat = engine.outputNode.outputFormat(forBus: 0) engine.connect(engine.mainMixerNode, to: engine.outputNode, format: hardwareFormat) if isPlaying { player.pause() } let auAudioUnit = avAudioUnit.auAudioUnit if !auAudioUnit.midiOutputNames.isEmpty { auAudioUnit.midiOutputEventBlock = midiOutBlock } engine.attach(avAudioUnit) if avAudioUnit.wantsAudioInput { engine.disconnectNodeInput(engine.mainMixerNode) if let format = file?.processingFormat { engine.connect(player, to: avAudioUnit, format: format) engine.connect(avAudioUnit, to: engine.mainMixerNode, format: format) } } else { let stereoFormat = AVAudioFormat(standardFormatWithSampleRate: hardwareFormat.sampleRate, channels: 2) engine.connect(avAudioUnit, to: engine.mainMixerNode, format: stereoFormat) } rewiringComplete() } } and my MIDI Manager @MainActor class MIDIManager: Identifiable, ObservableObject { func setupPort(midiProtocol: MIDIProtocolID, receiveBlock: @escaping @Sendable MIDIReceiveBlock) -> Bool { guard setupClient() else { return false } if MIDIInputPortCreateWithProtocol(client, portName, midiProtocol, &port, receiveBlock) != noErr { return false } for source in self.sources { if MIDIPortConnectSource(port, source, nil) != noErr { print("Failed to connect to source \(source)") return false } } setupVirtualMIDIOutput() return true } private func setupVirtualMIDIOutput() { let virtualStatus = MIDISourceCreate(client, virtualSourceName, &virtualSource) if virtualStatus != noErr { print("❌ Failed to create virtual MIDI source: \(virtualStatus)") } else { print("✅ Created virtual MIDI source: \(virtualSourceName)") } } func sendMIDIData(_ data: [UInt8]) { print("hey") var packetList = MIDIPacketList() withUnsafeMutablePointer(to: &packetList) { ptr in let pkt = MIDIPacketListInit(ptr) _ = MIDIPacketListAdd(ptr, 1024, pkt, 0, data.count, data) if virtualSource != 0 { let status = MIDIReceived(virtualSource, ptr) if status != noErr { print("❌ Failed to send MIDI data: \(status)") } else { print("✅ Sent MIDI data: \(data)") } } } } }
Replies
0
Boosts
0
Views
563
Activity
Aug ’25
CoreAudio server plugin gaining write access with SystemConfiguration.framework functions
Hi, our CourAudio server plugin utilizes the SystemConfiguration.framework to store and restore specific shared system wide settings. While our application can authenticate to utilize the SystemConfiguration.framework to gain write access to the shared configuration settings the CoreAudio server plugin obviously can't have any user interaction and therefor does not authenticate. Is it possible to authenticate the CoreAudio server plugin to gain write permissions? Are there any entitlements or other means that would allow this? Thanks!
Replies
2
Boosts
0
Views
192
Activity
Apr ’25
Accessory not supported by this device
Hi, I've had a new deck installed in my car for about 1.5 weeks. I'm having compatibility issues with my 15PM. It happens both wired and wirelessly, I get the error "Accessory not supported by this device". It used to happen all the time, now it's 50/50. Sometimes it works. I've removed and added Bluetooth multiple times on phone and deck, I bought a belkin usb-c to usb-a cable today and it seems to fix it but the problem comes back. I've changed the setting "FaceID and passcode-allow access when locked-accessories." The car stereo guy reckons it's definitely an issue with the phone not the deck, I'm inclined to believe him since the error states "by this device". Any advice appreciated.
Replies
0
Boosts
0
Views
223
Activity
Aug ’25
Regarding the issue of obtaining input channels for aggregated devices
I found that the aggregated device correctly obtains input channels in the standard microphone mode. However, in voice isolation mode, it only retrieves channels from the first sub-device in the aggregated device's list. If I want to properly obtain channel information in voice isolation mode, how should I do it?
Replies
0
Boosts
0
Views
368
Activity
Jun ’25
Number of songs in the Apple Music Feed
Hello, I'm evaluating the Apple Music Feed dataset and I noticed that the total number of songs available in the feed is too small. As of today, the number of objects returned in each feed is: 51,198,712 albums 23,093,698 artists 173,235,315 songs This gives an average of 3.38 songs per album which is quite low. Also, iterating on the data I see that there are albums referencing songs that don't exist in the songs feed. I would like to know: Is the feed data incomplete? If so, in what situations an object may be missing from the feed? Thank you in advance!
Replies
0
Boosts
0
Views
315
Activity
Aug ’25
(iOS 18) SFSpeechRecognitionResult providing new text after a gap in speaking
Here is the demo from Apple's site This issues is specific to iOS 18. When running this demo, we are getting new text when we have a gap in speaking, the recognitionTask(with:resultHandler:) provides new text which is only spoken after the gap and not the concatenation of old text and the new spoken text.
Replies
6
Boosts
0
Views
1.2k
Activity
May ’25
How to get PID from AudioObjectID on macOS pre Sonoma
3 I am working on an application to get when input audio device is being used. Basically I want to know the application using the microphone (built-in or external) This app runs on macOS. For Mac versions starting from Sonoma I can use this code: int getAudioProcessPID(AudioObjectID process) { pid_t pid; if (@available(macOS 14.0, *)) { constexpr AudioObjectPropertyAddress prop { kAudioProcessPropertyPID, kAudioObjectPropertyScopeGlobal, kAudioObjectPropertyElementMain }; UInt32 dataSize = sizeof(pid); OSStatus error = AudioObjectGetPropertyData(process, &amp;prop, 0, nullptr, &amp;dataSize, &amp;pid); if (error != noErr) { return -1; } } else { // Pre sonoma code goes here } return pid; } which works. However, kAudioProcessPropertyPID was added in macOS SDK 14.0. Does anyone know how to achieve the same functionality on previous versions?
Replies
1
Boosts
0
Views
384
Activity
Sep ’25
Apple Device Sync Backup
When using the Apple Devices to sync Apple Music to iPhone where is the Apple Devices backup being written to? Apple Devices->music->sync. Not trying to backup the iPhone via Apple Devices app.
Replies
0
Boosts
0
Views
87
Activity
Jun ’25
Potential Documentation Error in kAudioAggregateDevicePropertyTapList Sample Code
Hi, I believe I've found a potential error in the sample code on the documentation page for creating and using a process tap with an aggregate device. The issue is in the section explaining how to add a tap to the aggregate device. I have already filed a Feedback Assistant ticket on this (ID: FB17411663) but haven't heard back for months. Capturing system audio with Core Audio taps The sample code for modifying the kAudioAggregateDevicePropertyTapList incorrectly uses the tapID as the target AudioObjectID when calling AudioObjectSetPropertyData. // (Code to get the list and potentially modify listAsArray) if var listAsArray = list as? [CFString] { // ... (modification logic) ... // Set the list back on the aggregate device. <--- The comment is correct list = listAsArray as CFArray _ = withUnsafeMutablePointer(to: &list) { list in // INCORRECT: This call uses tapID as the target object. AudioObjectSetPropertyData(tapID, &propertyAddress, 0, nil, propertySize, list) } } The kAudioAggregateDevicePropertyTapList is a property that belongs to the aggregate device, not the individual tap. Therefore, to set this property, the AudioObjectSetPropertyData function must target the AudioObjectID of the aggregate device itself. Using tapID as the first argument is logically incorrect for this operation and will not update the aggregate device as intended. Furthermore, the preceding AudioObjectGetPropertyData call to fetch the list also appears to use the incorrect tapID as its target in the sample. The AudioObjectID for both getting and setting this property should be the ID of the aggregate device. _ = AudioObjectGetPropertyData(aggregateDeviceID, &propertyAddress, 0, nil, &propertySize, &list) _ = AudioObjectSetPropertyData(aggregateDeviceID, &propertyAddress, 0, nil, propertySize, newList) Thank you!
Replies
0
Boosts
0
Views
505
Activity
Sep ’25
MusicKit - Skipping Forwards or Backwards does not update
Hello everyone, I am working on an app that allows you to review your own music using Apple Music. Currently I am running into an issue with the skipping forwards and backwards outside of the app. How it should work: When skipping forward or backwards on the lock or home screen of an iPhone, the next or previous song on an album should play and the information should change to reflect that in the app. If you play a song in Apple Music, you can see a Now Playing view in the lock screen. When you skip forward or backwards, it will do either action and it would reflect that when you see a little frequency icon on artwork image of a song. What it's doing: When skipping forward or backwards on the lock or home screen of an iPhone, the next or previous song is reflected outside of the app, but not in the app. When skipping a song outside of the app, it works correctly to head to the next song. But when I return to the app, it is not reflected NOTE: I am not using MusicKit variables such as Track, Album to display the songs. Since I want to grab the songs and review them I need a rating so I created my own that grabs the MusicItemID, name, artist(s), etc. NOTE: I am using ApplicationMusicPlayer.shared Is there a way to get the song to reflect in my app? (If its easier, a simple example of it would be nice. No need to create an entire xprod file)
Replies
0
Boosts
0
Views
107
Activity
Apr ’25
Audio Unit logo for website
hi, Is there an Audio Unit logo I can show on my website? I would love to show that my application is able to host Audio Unit plugins. regards, Joël
Replies
0
Boosts
0
Views
471
Activity
Sep ’25
AutoMix Api Available in MusicKit
Is there any way for me to use an AutoMix api in my IOS apps, I would play tracks using the Apple Music api and use AutoMix to attempt to merge tracks. Is this feature/api available to developers.
Replies
0
Boosts
0
Views
136
Activity
Jun ’25
Play Audio and Recognize Speech in Car
Hello, I'm trying to determine the best/recommended AVAudioSession configuration (i.e category, mode, and options) for the following use-case. Essentially, I'd like to switch between periods of playing an audio file and then recognizing speech. The audio file is typically speech and I don't intend for playback and speech recognition to occur simultaneously. I'd like for the user to sill be able to interact with Siri and I'd like for it to work with CarPlay where navigation prompts can occur. I would assume the category to use is 'playAndRecord', but I'm not sure if it's better to just set that once for the entire lifecycle, or set to 'playback' for audio file playback and then switch to 'playAndRecord' for speech recognition . I'm also not sure on the best 'mode' and 'options' to set. Any suggestions would be appreciated. Thanks.
Replies
0
Boosts
0
Views
615
Activity
Sep ’25
iOS 17 camera capture assertions and issues
Hello, Starting in iOS 17, our application started having some issue publishing to our video session. More specifically the video capture seems to be broken in some, but not all sessions. What's troubling is that we're seeing that it fails consistently every 4 sessions. It also fails silently, without reporting any problems to the app. We only notice that there are no frames being rendered or sent to the remote devices. Here's what shows-up in the console: <<<< FigCaptureSourceRemote >>>> Fig assert: "! storage->connectionDied" at bail (FigCaptureSourceRemote.m:235) - (err=0) <<<< FigCaptureSourceRemote >>>> Fig assert: "err == 0 " at bail (FigCaptureSourceRemote.m:253) - (err=-16453) Anyone seeing this? Any idea what could be the cause? Our sessions work perfectly on iOS16 and below. Thanks
Replies
3
Boosts
1
Views
1.4k
Activity
Oct ’25
Mac OS Tahoe 26.0 (25A354) Sound Glitches When opening the simulator app
Hey there, I just upgraded to Mac OS Tahoe ,son an apple MacBook Pro 2019 16inch. am using IntellijIDEA and Flutter to develop a mobile app which I test on the simulator app running iOS 18.4 . the issue: when I start the simulator app. ( while in the loading phase and in the operation phase as well ), the audio from an already open YouTube tab on safari (this happens on chrome browser as well). the sound glitches and becomes Noise. a fix I found online is to kill the audio deamon on Mac OS, This works using the command: "sudo killall coreaudiod" this kills the audio process, (while the emulator is operational), then the macOS restarts the audio deamon then the audio works fine alongside with the simulator being open. I just want to ask is there a permanent fix for this? is Apple working on a fix for this in the upcoming update?
Replies
3
Boosts
5
Views
1.3k
Activity
Oct ’25
AVSpeechSynthesisVoices available on device
Hello there! Is there any list of voices that are always available on iOS/iPadOS devices? It seems that AVSpeechSynthesisVoice(identifier: "com.apple.voice.compact.en-US.Samantha") is always available on all devices. I thought that AVSpeechSynthesisVoice(identifier: "com.apple.ttsbundle.siri_Nicky_en-US_compact") and AVSpeechSynthesisVoice(identifier: "com.apple.ttsbundle.siri_Aaron_en-US_compact") were available by default on certain newer devices. Is this true? I also noticed that on the same iPad where I was using those 2 voices (Nicky and Aaron) - when I updated to the iPadOS 26 beta, those voices were no longer available. Any information you can share about which voices should be reliably available on which devices would be extremely helpful for our development. Thanks so much!
Replies
0
Boosts
0
Views
193
Activity
Jun ’25
Problems recording audio on Tahoe 26.0 (Intel only)
I have some tried-and-tested code that records and plays back audio via AUHAL which breaks on Tahoe on Intel. The same code works fine on Sequioa and also works on Tahoe on Apple Silicon. To start with something simple, the following code to request access to the Microphone doesn't work as it should: bool RequestMicrophoneAccess () { __block AVAuthorizationStatus status = [AVCaptureDevice authorizationStatusForMediaType: AVMediaTypeAudio]; if (status == AVAuthorizationStatusAuthorized) return true; __block bool done = false; [AVCaptureDevice requestAccessForMediaType: AVMediaTypeAudio completionHandler: ^ (BOOL granted) { status = (granted) ? AVAuthorizationStatusAuthorized : AVAuthorizationStatusDenied; done = true; }]; while (!done) CFRunLoopRunInMode (kCFRunLoopDefaultMode, 2.0, true); return status == AVAuthorizationStatusAuthorized; } On Tahoe on Intel, the code runs to completion but granted is always returned as NO. Tellingly, the popup to ask the user to grant microphone access is never displayed, even though the app is not present in the Privacy pane and never appears there. On Apple Silicon, everything works fine. There are some other problems, but I'm hoping they have a common underlying cause and that the Apple guys can figure out what's wrong from the information in this post. I'd be happy to test any potential fix. Thanks.
Replies
2
Boosts
0
Views
456
Activity
Oct ’25
Audio session activation occasionally fails from CarPlay
I'm working on adding CarPlay support to an audio app and am running into an issue. Occasionally, when a user opens the app from CarPlay while the main app scene is either not connected or is currently in the background, I will receive an error when attempting to activate the audio session. The code below mimics my setup: do { try AVAudioSession.sharedInstance().setCategory(.playback, mode: .spokenAudio) try AVAudioSession.sharedInstance().setActive(true) } catch { print(error) // NSOSStatusErrorDomain - 560557684: Session activation failed } That error code maps to AVAudioSession.ErrorCode.cannotInterruptOthers. Once in this state, all subsequent attempts to play different pieces of content will fail. However, things will start working normally if the user opens the app on their phone and tries again from CarPlay (while the app is in the foreground on their phone). I'm not sure why it would behave this way and want to note that I do have the audio background mode capability enabled. Has anyone else encountered this? Are there any workarounds or changes I could make to prevent this from happening?
Replies
0
Boosts
1
Views
205
Activity
Apr ’25