StoreKit

RSS for tag

Support in-app purchases and interactions with the App Store using StoreKit.

StoreKit Documentation

Posts under StoreKit subtopic

Post

Replies

Boosts

Views

Activity

Mac OS 15.4 breaks receipt Validation
I'm using Swift to verify receipts in myObjective C Mac Application using the following code: @objc class MyAppTransaction: NSObject{ @objc class func checkReceipt() async -> String { do { let verificationResult = try await AppTransaction.shared switch verificationResult { case .verified(_): return "VERIFIED" case .unverified(_, _): return "NO RECEIPT" } } catch { return "ERROR" //(StoreKit.StoreKitError) unknown } } } Starting today with my upgrade to Sequoia 15.4 and XCode 16.3 receipt validation is broken. The function is going to the catch and returning "ERROR" I can't set a break point in the do {} but if I set one at the return "ERROR", in the debugger error = (StoreKit.StoreKitError) unknown. the Compiler logs an error:Failed to parse AppTransaction: missingValue(for: [StoreKit.AppTransaction.Key.appTransactionID], expected: StoreKit.BackingValue). Reading the developer documentation I can't find anything about these struct members. I tried to use refresh() to get a receipt like I used to with exit(173) but the compiler says refresh () not found. This is extremely troubling because I can't debug my receipt validation code and I don't know if this will happen to my users. Do I just have to trust Apple that my users will have an application with a receipt attached? What can I do?
8
0
321
Apr ’25
不正利用された場合、Apple ID不正利用時とクレジットカード不正利用時で、アプリ側が行う標準的な対応プロセスは変わるのか
アプリに課金を実装しようと思うのですが、もし不正利用された場合、アプリ側は基本的にApp Storeを通じて対応するよう案内するのが一般的と思いますが、Apple ID不正利用時とクレジットカード不正利用時で、アプリ側が行う標準的な対応プロセスは変わるのか教えていただきたいです。 また下記内容は標準的な対応プロセスとして問題ないでしょうか?
 ■Apple ID不正利用時 → ユーザー自身がAppleサポートに連絡し、パスワード変更・二段階認証の設定・不正購入の返金申請などを行うよう案内する。 ■クレジットカード不正利用時 → まずカード会社への連絡を促すが、アプリ内決済に関してはAppleのカスタマーサポート経由で返金や調査手続きを案内する 不正利用されたユーザーへの対応に備えて、アプリ側が考慮すべきことがあれば教えてください。
0
0
128
May ’25
Subscription Unavailable - Strange Behavior with StoreKit
I added my first subscription to my app using StoreKit's SubscriptionStoreView. Everything worked as expected in the debug environment and also in TestFlight. So I submitted my app and subscriptions to App Store Connect, got everything Approved and released. After updating my app through App Store and checking the Subscription View, it just says "Subscription Unavailable. The subscription is unavailable in the current storefront." I waited around 3 days and still getting the same message. Now the very strange behavior starts. I went to App Store Connect, I made and edit to the subscription description, saved, removed the edit, saved, and submitted to review. 15 minutes later the subscriptions appear in my app and everything works as expected. After getting the edit approved, the Subscription View in my app again only showed the message "Subscription Unavailable. The subscription is unavailable in the current storefront." No user is able to see the subscriptions anymore, even though it worked as expected before the edit was approved. So I did the same as before. Again, make an edit to the subscription description, save, remove the edit, save, submit to review. 15 minutes later the subscriptions are again available in my app and it works as expected. This is definitely not the expected behavior and submitting the subscription edits every day is wasting the App Review Team's time as well as mine. I contacted Apple Developer Support but I didn't get any reply back (at least yet). I am not the only one experiencing this. I found a friend online who has the exact same issue, and is able to temporarily solve it by making an edit to the subscription description as well. So far it has been a huge headache, and we are losing customers this way. Please if anyone has experience with this problem, or has any suggestions, they will be greatly appreciated. Thank you so much, Tomas
32
19
7.2k
Feb ’26
Does scheduling a price change of a subscription while keeping the original price for existing subscribers trigger messaging to those users?
We're planning on increasing the price of our ios in-app subscription. We will select the option "Keep the current price for existing subscribers" Reading this https://developer.apple.com/help/app-store-connect/manage-subscriptions/manage-pricing-for-auto-renewable-subscriptions/, it's not clear if existing subscribers will be notified of the change in pricing (even though that change won't impact them) or not?
0
0
115
May ’25
Invalid currency symbol
Strange issue with currency display in subscription products Hi everyone, I'm facing a strange issue in my app where I use a subscription-based in-app purchase model. The products I created in App Store Connect are all in "Approved" status. I've tested with both RevenueCat and StoreKit, but the result is the same. Here are the products being loaded: Product loaded: weekly_product_id Display name: Weekly Pro Description: Weekly Pro Subscription Price: ₺229,99 Product loaded: annual_product_id Display name: Annual Pro Description: Annual Pro Subscription Price: ₺1.799,99 Even though I can see the correct prices and currency (Turkish Lira) in the Xcode debug console, on my real device the currency appears as Philippine Peso, as shown in the attached screenshot. Interestingly, in the iOS simulator, it's displayed in USD. I've double-checked and my device's region settings are set to Turkey. Any ideas on what could be causing this? And more importantly, how can I fix it? Thanks in advance!
3
0
115
Apr ’25
AppTransactionId support in Get Transaction Info endpoint — documentation change and actual behavior?
Hello, I have a question regarding the App Store Server API's getTransactionInfo endpoint. Previously, the official documentation for getTransactionInfo mentioned that: “This endpoint doesn’t support an app transaction. To get information about an app transaction, decode the signed app transaction received from the device.” However, as of June 2025, I can no longer find this sentence in the current documentation (link). Now, the docs state that all in-app purchase transaction IDs are supported (consumable, non-consumable, auto-renewable subscriptions, etc.). But in practice, when I call getTransactionInfo with an AppTransactionId (extracted from a signed App Transaction JWS), I receive this error: apiErrorCode: 4000048 “Invalid request. App transactions aren’t supported by this endpoint.” Is this endpoint supposed to support AppTransactionId now, or is the restriction still in place (but not mentioned in the docs)? Is there any official statement about when this restriction was added/removed? Can you clarify if only in-app purchase transaction IDs (and not AppTransactionIds) are supported for this endpoint, or has the policy changed recently? Any clarification or historical context would be greatly appreciated. Additionally, I would like to know about the behavior of an App Transaction in the event of a refund. If a user receives a refund for the app itself (not an in-app purchase), how can changes to the AppTransaction be detected? Does the App Store Server Notification v2 provide notifications for app-level refunds, or are such events only visible by decoding the latest App Transaction JWS on the device? Is there any way to receive app-level refund information server-side, or must we always rely on the device to provide the updated signed app transaction? Any clarification on this refund flow and notification coverage would also be appreciated. Thank you!
0
0
167
Jun ’25
Help: IAP Works in Xcode but Not in TestFlight – Cannot Link IAP to Version for Review
Hi everyone, I've been going back and forth with Apple’s review team for over 10 days now, and I'm still unable to get my first In-App Purchase (IAP) working correctly. Here's what’s happening: ✅ The IAP works perfectly when I build and run directly from Xcode. ❌ However, when I test the app via TestFlight, tapping the purchase buttons does nothing—the IAP sheet doesn't appear. Key issue (I think): I believe the IAP hasn't been submitted properly for review. On App Store Connect, I cannot select the IAP under the “In-App Purchases” section of the version submission page. It's grayed out or not listed at all. As a result, Apple keeps rejecting my binary due to the IAP not being included in the review. What I’ve already done: Created the IAP (non-consumable) Set pricing and cleared all errors Checked Bundle ID, Product ID, and entitlements Added In-App Purchase capability to the app target Uploaded the binary via Xcode Waited multiple times for status updates My questions: What’s the correct process to link the IAP to a specific app version if it doesn't show up in the version page? Could this be an issue with App Store Connect metadata or approval timing, or am I missing something in Xcode/build settings? Is there any way to force re-sync the IAP so it appears when submitting the build? Has anyone resolved a similar issue recently? This process has been incredibly frustrating, and the feedback from the review team so far has been very vague. I would really appreciate any detailed insight or steps to ensure the IAP is submitted correctly and works on TestFlight. Thank you in advance!
1
0
128
Jun ’25
StoreKit 2 Fails to Load Subscription Products
We are experiencing a critical issue where StoreKit 2 is returning empty products when using Product.products(for:), specifically on devices running iOS 18.4.

 This issue does not occur on iOS 18.3 or earlier.

 Steps:

 Created a subscription product (e.g. "upm1") in App Store Connect
 Confirmed the product is active, localised, and part of a valid subscription group
 Call the following Swift code using StoreKit 2:
 Task { do { let products = try await Product.products(for: ["upm1"]) print(products) } catch { print("Error: (error)") } } 4. Result: products is an empty list.

 This regression is blocking subscription testing on iOS 18.4. 

 Kindly someone please advise on a potential fix or workaround.
2
2
288
Sep ’25
Why does a purchase result in success unverified?
A purchase can result in success with verificationResult .unverified. Is there a list of reasons for which the transaction might be unverified and how should i handle it in my app? From my understanding, a successful unverified transaction means the user has already paid for the purchase. So, do i just ignore the unverified transaction or do i provide content to the user anyways?
1
2
131
Jul ’25
StoreKit beginRefundRequest issue
I'm developing storekitV2, my app is providing the way to refund some product, and I use method below. func beginRefundRequest(in scene: UIWindowScene) async throws -> Transaction.RefundRequestStatus however when i call the method, the modal view presented but the view shows error with message 'cannot connect'. when I select retry button, something done with indicator and get same result. how can I solve this problem?
3
0
485
May ’25
StoreKit payment return error
this error occurred during the StoreKit1 payment process. Could you please tell me the reason? SKErrorDomain Code=0 "发生未知错误\" UserInfo= {NSLocalizedDescription=发生未知错误,NSUnderlyingError=0x17652ee50 {Error Domain=ASDErrorDomain Code=500"(null)\"Userlnfo={NSUnderlyingError=0x17652d530 {Error Domain=AMSErrorDomain Code=203 "(null)" Userlnfo= {NSUnderlyingError=0x17652c3c0 {Error Domain=AMSErrorDomain Code=203"(null)\"UserInfo=0x1663e5940(not displayed)}}}
1
0
105
Jun ’25
StoreKitV2 重新购买新的产品但是返回的是上次的支付凭证,提示用户已经购买了。
代码块 让购买结果=尝试等待购买(产品,选项:[选项]) //处理支付结果 开关购买结果{ 案例让.success(验证结果): 如果案例让.verified(交易)=验证结果{ await transaction.finish()case .userCancelled: 自我.取消回调?() 案例.pending: /// 交易可能在未来成功,通过Transaction.updates进行通知。 打印(“苹果支付中待定”) 默认: 打破 } } 抓住 { 自我失败回电话?(”产品购买失败:\(错误)") 打印(“产品购买失败:\(错误)”) } 凭证相关信息如下: transactionid:1230000065994257 appAccountToken:D613C126-4142-4BFF-9960-00AE3F5A6F83 "jwsInfo": ["header": "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", "payload": "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", "signature": "SXieZGabBt6xHoSaBsZ1k4AexqkNYzwZel0BEhGqc3mxrd4kzOR5wERRATXySqbqfT3WJzkDAsr9jmCdoz_7-g"], "status": "normal", "transactionId": "1230000065994257"]","Band_Phone_Num":"18653588566","Platform":"124","Oper_Time":"1745823519","verification_time":"1745823519115"},"ISP":"移动","OETM":"1745823519116","CLIENTID":"","CPURATE":"0.257","AMBERUDID":"1f72113ecc704ce4a4cc135e8af71ee6","ANAME":"","MEMRATE":"0.02346919","CITY":"北京","PROMOTION":"\\","CLIENTIP":"192.168.31.74","CLIENTIPV6":"fe80::4e3:40a8:51c3:dbf5","DB":"Apple","APN":"com.migu.cloudavp","ETM":"2025-04-28 14:58:39 116"} 请帮我查一下 是这个订单没关闭成功吗?为什么出现购买新的产品 返回的永远是这个支付凭证。
2
0
154
Apr ’25
Regarding the pattern of multiple original transaction IDs being linked
In the app we're distributing, we've identified a user where the Get All Subscription Statuses API returns two original transaction IDs in the data response. This user has gone through cancellations and re-subscriptions since their initial purchase. Meanwhile, despite maintaining a continuous subscription, a notification suddenly arrives on the renewal date with original_transaction_id2. +---------------------------+---------------------------+---------------------+ | original_transaction_id | notification_type | subtype | +---------------------------+---------------------------+---------------------+ | original_transaction_id1 | SUBSCRIBED | INITIAL_BUY | ~ Repeated cancellations and re-subscriptions ~ | original_transaction_id1 | SUBSCRIBED | RESUBSCRIBE | | original_transaction_id2 | SUBSCRIBED | INITIAL_BUY | +---------------------------+---------------------------+---------------------+ Although it can be inferred from the interface definition of the API itself that multiple original transaction IDs may be returned, what causes multiple original transaction IDs to be returned? Furthermore, is it possible to reproduce the case where multiple original transaction IDs are returned in the sandbox environment provided by Apple? As for this app, it: Uses subscriptions through in-app purchases. Does not offer upgrades, downgrades, or crossgrades, having only one product. Has never undergone price increases or decreases. Is distributed exclusively in Japan.
0
0
91
Jun ’25
How to cancel Auto-renewable subscription bought in TestFlight?
I've read several topics on cancelling subscriptions in sandbox environment, but it seems to me that it could not be applied to TestFlight. I can cancel sandbox subscriptions through Settings > App Store > Sandbox account But since TestFlight does not use sandbox account I cannot cancel a sub from there. Also, TF purchase does not appear in the list of regular subscriptions (Settings > Profile > Media & Purchases). So my question is: is there any way to manually cancel auto-renewable subscription bought in TestFlight build of the app?
6
6
7.0k
3w
Unable to retrieve data from In App Purchase
I want to add in-app purchasing to my app, but I can't figure out what part of my workflow is wrong. I created a product for my app in iTunes Connect (the product ID is com.mycompany.products.***) and it's in "Ready to submit" status. I created a sandbox test user for this app. I connected to iTunes on a real device using the sandbox AppleID. I went back to XCode and added in-app purchasing to my app. I turned on developer mode on the real device and logged in as the sandbox user. I built the app and ran it on a real device (not the simulator). I tried to get product information (com.mycompany.products.***) but nothing was returned. In-app purchasing is registered in App Store Connect and the status is "Ready to submit". The code only retrieves product information in a simple way, so I don't think there's a problem. inAppPurchase.getProducts(["com.mycompany.products.***"]).then(console.log).catch(console.error); But it only returns an empty array. What could be wrong? Any help would be much appreciated.
2
1
74
Jul ’25
TestFlight Subscription Upgrade Handling
Looking for assistance in managing subscription upgrades for TestFlight users. I have a few monthly subscriptions, 30days, each with a different set of available features, 1 with all, and 1 with fewer. (All are in proper order and grouped in App Store connection subscriptions) subscribing seems to be working fine, and purchasing an upgrade is going ok. what is not: reflecting the upgraded plan in app (currently reflects it will start in 30days when current subscription expires) I’m lead to believe this will be resolved with a live app in App Store, that will then handle prorating, terminate the old plan and immediately start the new one. looking for help getting TestFlight to show immediate upgrades.
0
0
148
May ’25
Transactions Finish does not work on iOS 26 beta3
On iOS 26 beta 3, after a user purchases an item, initiating a second order for the same product fails to process payment. The system returns the same transaction ID and displays an interface message stating: "You've already purchased this In-App Purchase. It will be restored for free."​​ ​​I’ve tested this – not only did the legacy StoreKit finishTransaction method fail to work, but StoreKit2 finish method also malfunctioned.​​ ​​When will Apple fix this issue? If unresolved, it will prevent a large number of users from making purchases normally, leading to disastrous consequences.​
4
5
599
Jul ’25
【iOS18.2~18.3.2 bug】After switching sandbox accounts in Settings, the value of SKStorefront.countryCode is not synchronized
Problem Description: 1、I have two sandbox accounts from different countries. Account A is from Mainland China (CHN), and Account B is from the United States (USA). When I switch the sandbox account from Account A (CHN) to Account B (USA) in the system settings and restart the app, the value of SKPaymentQueue.defaultQueue.storefront.countryCode always returns "CHN" instead of the expected "USA". 2、This issue only occurs on iOS 18.2 and above. 3、On the same device running iOS 17.5.1, the behavior is correct. However, after upgrading the system to iOS 18.3.2, the error occurs. 4、In the sandbox environment, although SKStorefront.countryCode returns the wrong value, the currency type for Apple's in-app purchase is correct when initiating the payment. 5、The issue only exists in the sandbox environment and does not occur in the App Store-downloaded package. Demo Code: - (IBAction)clickButton:(id)sender { NSString *appStoreCountryCode3 = SKPaymentQueue.defaultQueue.storefront.countryCode; NSLog(@"%@",appStoreCountryCode3); } Demo Testing Steps and Results: 1、Sandbox Account A (China) will print "CHN". 2、Go to Settings - Developer - (at the bottom) SANDBOX APPLE ACCOUNT, and switch to another sandbox account B (USA). 3、Restart the Demo App. 4、Print results: iOS 17.5.1: "USA" ✅ → Upgrade the system of the same device to iOS 18.3.2 → "CHN" ❌ iOS 18.2.1: "CHN" ❌ iOS 18.3.1: "CHN" ❌ iOS 18.3.2: "CHN" ❌ Possible Clues: Starting with iOS 18.2, Apple changed the entry point for setting up sandbox accounts, which introduced this bug. It seems that when users switch sandbox accounts on iOS 18.2, Apple engineers forgot to notify the SKStorefront class to update the countryCode value. Before iOS 18.2: Settings - App Store - Sandbox Account iOS 18.2 and later: Settings - Developer - (at the bottom) Sandbox Account Although it doesn't affect the App Store package, it does impact our development and testing process. We hope this issue can be fixed in future versions. Thank you!
5
2
997
Oct ’25
Production review failed because IAP products cannot be loaded
My app has a couple of consumable IAP items. I have tested this extensively and it works in all test scenarios including loads of beta testers using testflight. However, Apple's production reviewer reports that loading of the products hangs in their setup. This is very frustrating as I have no means of recreating the problem. My first product was tested ok an all my IAP items are approved for release. However, I did not explicitly assign them to my build. I read somewhere that you need to do that but could not find in App Store Connect after my first product was approved. Below is the relevant code section. What am I missing? class DonationManager: NSObject, ObservableObject, SKProductsRequestDelegate, SKPaymentTransactionObserver { @Published var products: [SKProduct] = [] // This is observed by a view. But apparently that view never gets populated in Apple's production review setup @Published var isPurchasing: Bool = false @Published var purchaseMessage: String? = nil let productIDs: Set<String> = ["Donation_5", "Donation_10", "Donation_25", "Donation_50"] override init() { super.init() SKPaymentQueue.default().add(self) fetchProducts() } deinit { SKPaymentQueue.default().remove(self) } func fetchProducts() { print("Attempting to fetch products with IDs: \(productIDs)") let request = SKProductsRequest(productIdentifiers: productIDs) request.delegate = self request.start() } func productsRequest(_ request: SKProductsRequest, didReceive response: SKProductsResponse) { DispatchQueue.main.async { self.products = response.products.sorted { $0.price.compare($1.price) == .orderedAscending } print("Successfully fetched \(self.products.count) products.") if !response.invalidProductIdentifiers.isEmpty { print("Invalid Product Identifiers: \(response.invalidProductIdentifiers)") self.purchaseMessage = NSLocalizedString("Some products could not be loaded. Please check App Store Connect.", comment: "") } else if self.products.isEmpty { print("No products were fetched. This could indicate a problem with App Store Connect configuration or network.") self.purchaseMessage = NSLocalizedString("No products available. Please try again later.", comment: "") } } } ...and the view showing the items: @StateObject private var donationManager = DonationManager() var body: some View { VStack(spacing: 24) { Spacer() // Donation options ------------------- if donationManager.products.isEmpty { ProgressView(NSLocalizedString("Loading donation options...", comment: "")) .foregroundColor(DARK_BROWN) .italic() .font(.title3) .padding(.top, 16) } else { ForEach(donationManager.products, id: \.self) { product in Button(action: { donationManager.buy(product: product) }) { HStack { Image(systemName: "cup.and.saucer.fill") .foregroundColor(.pink) Text("\(product.localizedTitle) \(product.priceLocale.currencySymbol ?? "$")\(product.price)") } .buttonStyle() } .disabled(donationManager.isPurchasing) } }
2
0
218
Jul ’25
AppStore response times for the store test environment to make purchases is very long.
I enter the payment wall, there it takes more or less 3 to 4 minutes to show the plans, when I select the monthly plan the loader is shown and from there the pop up to make the purchase in sandbox does not appear, I have waited until a maximum of 50 minutes and it is not shown, I go back and close the app I do the same steps and I am still there, without showing the pop up. Doing this same process in xcode, everything happens immediately without any interruption.
0
1
135
May ’25
Mac OS 15.4 breaks receipt Validation
I'm using Swift to verify receipts in myObjective C Mac Application using the following code: @objc class MyAppTransaction: NSObject{ @objc class func checkReceipt() async -> String { do { let verificationResult = try await AppTransaction.shared switch verificationResult { case .verified(_): return "VERIFIED" case .unverified(_, _): return "NO RECEIPT" } } catch { return "ERROR" //(StoreKit.StoreKitError) unknown } } } Starting today with my upgrade to Sequoia 15.4 and XCode 16.3 receipt validation is broken. The function is going to the catch and returning "ERROR" I can't set a break point in the do {} but if I set one at the return "ERROR", in the debugger error = (StoreKit.StoreKitError) unknown. the Compiler logs an error:Failed to parse AppTransaction: missingValue(for: [StoreKit.AppTransaction.Key.appTransactionID], expected: StoreKit.BackingValue). Reading the developer documentation I can't find anything about these struct members. I tried to use refresh() to get a receipt like I used to with exit(173) but the compiler says refresh () not found. This is extremely troubling because I can't debug my receipt validation code and I don't know if this will happen to my users. Do I just have to trust Apple that my users will have an application with a receipt attached? What can I do?
Replies
8
Boosts
0
Views
321
Activity
Apr ’25
不正利用された場合、Apple ID不正利用時とクレジットカード不正利用時で、アプリ側が行う標準的な対応プロセスは変わるのか
アプリに課金を実装しようと思うのですが、もし不正利用された場合、アプリ側は基本的にApp Storeを通じて対応するよう案内するのが一般的と思いますが、Apple ID不正利用時とクレジットカード不正利用時で、アプリ側が行う標準的な対応プロセスは変わるのか教えていただきたいです。 また下記内容は標準的な対応プロセスとして問題ないでしょうか?
 ■Apple ID不正利用時 → ユーザー自身がAppleサポートに連絡し、パスワード変更・二段階認証の設定・不正購入の返金申請などを行うよう案内する。 ■クレジットカード不正利用時 → まずカード会社への連絡を促すが、アプリ内決済に関してはAppleのカスタマーサポート経由で返金や調査手続きを案内する 不正利用されたユーザーへの対応に備えて、アプリ側が考慮すべきことがあれば教えてください。
Replies
0
Boosts
0
Views
128
Activity
May ’25
Subscription Unavailable - Strange Behavior with StoreKit
I added my first subscription to my app using StoreKit's SubscriptionStoreView. Everything worked as expected in the debug environment and also in TestFlight. So I submitted my app and subscriptions to App Store Connect, got everything Approved and released. After updating my app through App Store and checking the Subscription View, it just says "Subscription Unavailable. The subscription is unavailable in the current storefront." I waited around 3 days and still getting the same message. Now the very strange behavior starts. I went to App Store Connect, I made and edit to the subscription description, saved, removed the edit, saved, and submitted to review. 15 minutes later the subscriptions appear in my app and everything works as expected. After getting the edit approved, the Subscription View in my app again only showed the message "Subscription Unavailable. The subscription is unavailable in the current storefront." No user is able to see the subscriptions anymore, even though it worked as expected before the edit was approved. So I did the same as before. Again, make an edit to the subscription description, save, remove the edit, save, submit to review. 15 minutes later the subscriptions are again available in my app and it works as expected. This is definitely not the expected behavior and submitting the subscription edits every day is wasting the App Review Team's time as well as mine. I contacted Apple Developer Support but I didn't get any reply back (at least yet). I am not the only one experiencing this. I found a friend online who has the exact same issue, and is able to temporarily solve it by making an edit to the subscription description as well. So far it has been a huge headache, and we are losing customers this way. Please if anyone has experience with this problem, or has any suggestions, they will be greatly appreciated. Thank you so much, Tomas
Replies
32
Boosts
19
Views
7.2k
Activity
Feb ’26
Does scheduling a price change of a subscription while keeping the original price for existing subscribers trigger messaging to those users?
We're planning on increasing the price of our ios in-app subscription. We will select the option "Keep the current price for existing subscribers" Reading this https://developer.apple.com/help/app-store-connect/manage-subscriptions/manage-pricing-for-auto-renewable-subscriptions/, it's not clear if existing subscribers will be notified of the change in pricing (even though that change won't impact them) or not?
Replies
0
Boosts
0
Views
115
Activity
May ’25
Invalid currency symbol
Strange issue with currency display in subscription products Hi everyone, I'm facing a strange issue in my app where I use a subscription-based in-app purchase model. The products I created in App Store Connect are all in "Approved" status. I've tested with both RevenueCat and StoreKit, but the result is the same. Here are the products being loaded: Product loaded: weekly_product_id Display name: Weekly Pro Description: Weekly Pro Subscription Price: ₺229,99 Product loaded: annual_product_id Display name: Annual Pro Description: Annual Pro Subscription Price: ₺1.799,99 Even though I can see the correct prices and currency (Turkish Lira) in the Xcode debug console, on my real device the currency appears as Philippine Peso, as shown in the attached screenshot. Interestingly, in the iOS simulator, it's displayed in USD. I've double-checked and my device's region settings are set to Turkey. Any ideas on what could be causing this? And more importantly, how can I fix it? Thanks in advance!
Replies
3
Boosts
0
Views
115
Activity
Apr ’25
AppTransactionId support in Get Transaction Info endpoint — documentation change and actual behavior?
Hello, I have a question regarding the App Store Server API's getTransactionInfo endpoint. Previously, the official documentation for getTransactionInfo mentioned that: “This endpoint doesn’t support an app transaction. To get information about an app transaction, decode the signed app transaction received from the device.” However, as of June 2025, I can no longer find this sentence in the current documentation (link). Now, the docs state that all in-app purchase transaction IDs are supported (consumable, non-consumable, auto-renewable subscriptions, etc.). But in practice, when I call getTransactionInfo with an AppTransactionId (extracted from a signed App Transaction JWS), I receive this error: apiErrorCode: 4000048 “Invalid request. App transactions aren’t supported by this endpoint.” Is this endpoint supposed to support AppTransactionId now, or is the restriction still in place (but not mentioned in the docs)? Is there any official statement about when this restriction was added/removed? Can you clarify if only in-app purchase transaction IDs (and not AppTransactionIds) are supported for this endpoint, or has the policy changed recently? Any clarification or historical context would be greatly appreciated. Additionally, I would like to know about the behavior of an App Transaction in the event of a refund. If a user receives a refund for the app itself (not an in-app purchase), how can changes to the AppTransaction be detected? Does the App Store Server Notification v2 provide notifications for app-level refunds, or are such events only visible by decoding the latest App Transaction JWS on the device? Is there any way to receive app-level refund information server-side, or must we always rely on the device to provide the updated signed app transaction? Any clarification on this refund flow and notification coverage would also be appreciated. Thank you!
Replies
0
Boosts
0
Views
167
Activity
Jun ’25
Help: IAP Works in Xcode but Not in TestFlight – Cannot Link IAP to Version for Review
Hi everyone, I've been going back and forth with Apple’s review team for over 10 days now, and I'm still unable to get my first In-App Purchase (IAP) working correctly. Here's what’s happening: ✅ The IAP works perfectly when I build and run directly from Xcode. ❌ However, when I test the app via TestFlight, tapping the purchase buttons does nothing—the IAP sheet doesn't appear. Key issue (I think): I believe the IAP hasn't been submitted properly for review. On App Store Connect, I cannot select the IAP under the “In-App Purchases” section of the version submission page. It's grayed out or not listed at all. As a result, Apple keeps rejecting my binary due to the IAP not being included in the review. What I’ve already done: Created the IAP (non-consumable) Set pricing and cleared all errors Checked Bundle ID, Product ID, and entitlements Added In-App Purchase capability to the app target Uploaded the binary via Xcode Waited multiple times for status updates My questions: What’s the correct process to link the IAP to a specific app version if it doesn't show up in the version page? Could this be an issue with App Store Connect metadata or approval timing, or am I missing something in Xcode/build settings? Is there any way to force re-sync the IAP so it appears when submitting the build? Has anyone resolved a similar issue recently? This process has been incredibly frustrating, and the feedback from the review team so far has been very vague. I would really appreciate any detailed insight or steps to ensure the IAP is submitted correctly and works on TestFlight. Thank you in advance!
Replies
1
Boosts
0
Views
128
Activity
Jun ’25
StoreKit 2 Fails to Load Subscription Products
We are experiencing a critical issue where StoreKit 2 is returning empty products when using Product.products(for:), specifically on devices running iOS 18.4.

 This issue does not occur on iOS 18.3 or earlier.

 Steps:

 Created a subscription product (e.g. "upm1") in App Store Connect
 Confirmed the product is active, localised, and part of a valid subscription group
 Call the following Swift code using StoreKit 2:
 Task { do { let products = try await Product.products(for: ["upm1"]) print(products) } catch { print("Error: (error)") } } 4. Result: products is an empty list.

 This regression is blocking subscription testing on iOS 18.4. 

 Kindly someone please advise on a potential fix or workaround.
Replies
2
Boosts
2
Views
288
Activity
Sep ’25
Why does a purchase result in success unverified?
A purchase can result in success with verificationResult .unverified. Is there a list of reasons for which the transaction might be unverified and how should i handle it in my app? From my understanding, a successful unverified transaction means the user has already paid for the purchase. So, do i just ignore the unverified transaction or do i provide content to the user anyways?
Replies
1
Boosts
2
Views
131
Activity
Jul ’25
StoreKit beginRefundRequest issue
I'm developing storekitV2, my app is providing the way to refund some product, and I use method below. func beginRefundRequest(in scene: UIWindowScene) async throws -> Transaction.RefundRequestStatus however when i call the method, the modal view presented but the view shows error with message 'cannot connect'. when I select retry button, something done with indicator and get same result. how can I solve this problem?
Replies
3
Boosts
0
Views
485
Activity
May ’25
StoreKit payment return error
this error occurred during the StoreKit1 payment process. Could you please tell me the reason? SKErrorDomain Code=0 "发生未知错误\" UserInfo= {NSLocalizedDescription=发生未知错误,NSUnderlyingError=0x17652ee50 {Error Domain=ASDErrorDomain Code=500"(null)\"Userlnfo={NSUnderlyingError=0x17652d530 {Error Domain=AMSErrorDomain Code=203 "(null)" Userlnfo= {NSUnderlyingError=0x17652c3c0 {Error Domain=AMSErrorDomain Code=203"(null)\"UserInfo=0x1663e5940(not displayed)}}}
Replies
1
Boosts
0
Views
105
Activity
Jun ’25
StoreKitV2 重新购买新的产品但是返回的是上次的支付凭证,提示用户已经购买了。
代码块 让购买结果=尝试等待购买(产品,选项:[选项]) //处理支付结果 开关购买结果{ 案例让.success(验证结果): 如果案例让.verified(交易)=验证结果{ await transaction.finish()case .userCancelled: 自我.取消回调?() 案例.pending: /// 交易可能在未来成功,通过Transaction.updates进行通知。 打印(“苹果支付中待定”) 默认: 打破 } } 抓住 { 自我失败回电话?(”产品购买失败:\(错误)") 打印(“产品购买失败:\(错误)”) } 凭证相关信息如下: transactionid:1230000065994257 appAccountToken:D613C126-4142-4BFF-9960-00AE3F5A6F83 "jwsInfo": ["header": "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", "payload": "eyJ0cmFuc2FjdGlvbklkIjoiMTIzMDAwMDA2NTk5NDI1NyIsIm9yaWdpbmFsVHJhbnNhY3Rpb25JZCI6IjEyMzAwMDAwNjU5OTQyNTciLCJidW5kbGVJZCI6ImNvbS5taWd1LmNsb3VkYXZwIiwicHJvZHVjdElkIjoibWlndS52aXNpb24uTW92aWUuOCIsInB1cmNoYXNlRGF0ZSI6MTc0NDgwNzYzMjAwMCwib3JpZ2luYWxQdXJjaGFzZURhdGUiOjE3NDQ4MDc2MzIwMDAsInF1YW50aXR5IjoxLCJ0eXBlIjoiTm9uLVJlbmV3aW5nIFN1YnNjcmlwdGlvbiIsImRldmljZVZlcmlmaWNhdGlvbiI6IjdIdUtPRUhRdVd2L0hKZjdLdlBzQnJOWUNoc2V3c3k3enpPZ2k1YjE3UW8wVnd2clhhQ3B5TTNmZTN3cFBqRUwiLCJkZXZpY2VWZXJpZmljYXRpb25Ob25jZSI6ImQ3YzgwOWI2LTFjNDMtNDIwOC1iZWVmLWVhZDUwYzY1ZGIwZCIsImFwcEFjY291bnRUb2tlbiI6ImQ2MTNjMTI2LTQxNDItNGJmZi05OTYwLTAwYWUzZjVhNmY4MyIsImluQXBwT3duZXJzaGlwVHlwZSI6IlBVUkNIQVNFRCIsInNpZ25lZERhdGUiOjE3NDU4MjM1MTU5OTUsImVudmlyb25tZW50IjoiUHJvZHVjdGlvbiIsInRyYW5zYWN0aW9uUmVhc29uIjoiUFVSQ0hBU0UiLCJzdG9yZWZyb250IjoiQ0hOIiwic3RvcmVmcm9udElkIjoiMTQzNDY1IiwicHJpY2UiOjgwMDAsImN1cnJlbmN5IjoiQ05ZIiwiYXBwVHJhbnNhY3Rpb25JZCI6IjcwNDQxMzM2NTEzNjUyNzAzMyJ9", "signature": "SXieZGabBt6xHoSaBsZ1k4AexqkNYzwZel0BEhGqc3mxrd4kzOR5wERRATXySqbqfT3WJzkDAsr9jmCdoz_7-g"], "status": "normal", "transactionId": "1230000065994257"]","Band_Phone_Num":"18653588566","Platform":"124","Oper_Time":"1745823519","verification_time":"1745823519115"},"ISP":"移动","OETM":"1745823519116","CLIENTID":"","CPURATE":"0.257","AMBERUDID":"1f72113ecc704ce4a4cc135e8af71ee6","ANAME":"","MEMRATE":"0.02346919","CITY":"北京","PROMOTION":"\\","CLIENTIP":"192.168.31.74","CLIENTIPV6":"fe80::4e3:40a8:51c3:dbf5","DB":"Apple","APN":"com.migu.cloudavp","ETM":"2025-04-28 14:58:39 116"} 请帮我查一下 是这个订单没关闭成功吗?为什么出现购买新的产品 返回的永远是这个支付凭证。
Replies
2
Boosts
0
Views
154
Activity
Apr ’25
Regarding the pattern of multiple original transaction IDs being linked
In the app we're distributing, we've identified a user where the Get All Subscription Statuses API returns two original transaction IDs in the data response. This user has gone through cancellations and re-subscriptions since their initial purchase. Meanwhile, despite maintaining a continuous subscription, a notification suddenly arrives on the renewal date with original_transaction_id2. +---------------------------+---------------------------+---------------------+ | original_transaction_id | notification_type | subtype | +---------------------------+---------------------------+---------------------+ | original_transaction_id1 | SUBSCRIBED | INITIAL_BUY | ~ Repeated cancellations and re-subscriptions ~ | original_transaction_id1 | SUBSCRIBED | RESUBSCRIBE | | original_transaction_id2 | SUBSCRIBED | INITIAL_BUY | +---------------------------+---------------------------+---------------------+ Although it can be inferred from the interface definition of the API itself that multiple original transaction IDs may be returned, what causes multiple original transaction IDs to be returned? Furthermore, is it possible to reproduce the case where multiple original transaction IDs are returned in the sandbox environment provided by Apple? As for this app, it: Uses subscriptions through in-app purchases. Does not offer upgrades, downgrades, or crossgrades, having only one product. Has never undergone price increases or decreases. Is distributed exclusively in Japan.
Replies
0
Boosts
0
Views
91
Activity
Jun ’25
How to cancel Auto-renewable subscription bought in TestFlight?
I've read several topics on cancelling subscriptions in sandbox environment, but it seems to me that it could not be applied to TestFlight. I can cancel sandbox subscriptions through Settings > App Store > Sandbox account But since TestFlight does not use sandbox account I cannot cancel a sub from there. Also, TF purchase does not appear in the list of regular subscriptions (Settings > Profile > Media & Purchases). So my question is: is there any way to manually cancel auto-renewable subscription bought in TestFlight build of the app?
Replies
6
Boosts
6
Views
7.0k
Activity
3w
Unable to retrieve data from In App Purchase
I want to add in-app purchasing to my app, but I can't figure out what part of my workflow is wrong. I created a product for my app in iTunes Connect (the product ID is com.mycompany.products.***) and it's in "Ready to submit" status. I created a sandbox test user for this app. I connected to iTunes on a real device using the sandbox AppleID. I went back to XCode and added in-app purchasing to my app. I turned on developer mode on the real device and logged in as the sandbox user. I built the app and ran it on a real device (not the simulator). I tried to get product information (com.mycompany.products.***) but nothing was returned. In-app purchasing is registered in App Store Connect and the status is "Ready to submit". The code only retrieves product information in a simple way, so I don't think there's a problem. inAppPurchase.getProducts(["com.mycompany.products.***"]).then(console.log).catch(console.error); But it only returns an empty array. What could be wrong? Any help would be much appreciated.
Replies
2
Boosts
1
Views
74
Activity
Jul ’25
TestFlight Subscription Upgrade Handling
Looking for assistance in managing subscription upgrades for TestFlight users. I have a few monthly subscriptions, 30days, each with a different set of available features, 1 with all, and 1 with fewer. (All are in proper order and grouped in App Store connection subscriptions) subscribing seems to be working fine, and purchasing an upgrade is going ok. what is not: reflecting the upgraded plan in app (currently reflects it will start in 30days when current subscription expires) I’m lead to believe this will be resolved with a live app in App Store, that will then handle prorating, terminate the old plan and immediately start the new one. looking for help getting TestFlight to show immediate upgrades.
Replies
0
Boosts
0
Views
148
Activity
May ’25
Transactions Finish does not work on iOS 26 beta3
On iOS 26 beta 3, after a user purchases an item, initiating a second order for the same product fails to process payment. The system returns the same transaction ID and displays an interface message stating: "You've already purchased this In-App Purchase. It will be restored for free."​​ ​​I’ve tested this – not only did the legacy StoreKit finishTransaction method fail to work, but StoreKit2 finish method also malfunctioned.​​ ​​When will Apple fix this issue? If unresolved, it will prevent a large number of users from making purchases normally, leading to disastrous consequences.​
Replies
4
Boosts
5
Views
599
Activity
Jul ’25
【iOS18.2~18.3.2 bug】After switching sandbox accounts in Settings, the value of SKStorefront.countryCode is not synchronized
Problem Description: 1、I have two sandbox accounts from different countries. Account A is from Mainland China (CHN), and Account B is from the United States (USA). When I switch the sandbox account from Account A (CHN) to Account B (USA) in the system settings and restart the app, the value of SKPaymentQueue.defaultQueue.storefront.countryCode always returns "CHN" instead of the expected "USA". 2、This issue only occurs on iOS 18.2 and above. 3、On the same device running iOS 17.5.1, the behavior is correct. However, after upgrading the system to iOS 18.3.2, the error occurs. 4、In the sandbox environment, although SKStorefront.countryCode returns the wrong value, the currency type for Apple's in-app purchase is correct when initiating the payment. 5、The issue only exists in the sandbox environment and does not occur in the App Store-downloaded package. Demo Code: - (IBAction)clickButton:(id)sender { NSString *appStoreCountryCode3 = SKPaymentQueue.defaultQueue.storefront.countryCode; NSLog(@"%@",appStoreCountryCode3); } Demo Testing Steps and Results: 1、Sandbox Account A (China) will print "CHN". 2、Go to Settings - Developer - (at the bottom) SANDBOX APPLE ACCOUNT, and switch to another sandbox account B (USA). 3、Restart the Demo App. 4、Print results: iOS 17.5.1: "USA" ✅ → Upgrade the system of the same device to iOS 18.3.2 → "CHN" ❌ iOS 18.2.1: "CHN" ❌ iOS 18.3.1: "CHN" ❌ iOS 18.3.2: "CHN" ❌ Possible Clues: Starting with iOS 18.2, Apple changed the entry point for setting up sandbox accounts, which introduced this bug. It seems that when users switch sandbox accounts on iOS 18.2, Apple engineers forgot to notify the SKStorefront class to update the countryCode value. Before iOS 18.2: Settings - App Store - Sandbox Account iOS 18.2 and later: Settings - Developer - (at the bottom) Sandbox Account Although it doesn't affect the App Store package, it does impact our development and testing process. We hope this issue can be fixed in future versions. Thank you!
Replies
5
Boosts
2
Views
997
Activity
Oct ’25
Production review failed because IAP products cannot be loaded
My app has a couple of consumable IAP items. I have tested this extensively and it works in all test scenarios including loads of beta testers using testflight. However, Apple's production reviewer reports that loading of the products hangs in their setup. This is very frustrating as I have no means of recreating the problem. My first product was tested ok an all my IAP items are approved for release. However, I did not explicitly assign them to my build. I read somewhere that you need to do that but could not find in App Store Connect after my first product was approved. Below is the relevant code section. What am I missing? class DonationManager: NSObject, ObservableObject, SKProductsRequestDelegate, SKPaymentTransactionObserver { @Published var products: [SKProduct] = [] // This is observed by a view. But apparently that view never gets populated in Apple's production review setup @Published var isPurchasing: Bool = false @Published var purchaseMessage: String? = nil let productIDs: Set<String> = ["Donation_5", "Donation_10", "Donation_25", "Donation_50"] override init() { super.init() SKPaymentQueue.default().add(self) fetchProducts() } deinit { SKPaymentQueue.default().remove(self) } func fetchProducts() { print("Attempting to fetch products with IDs: \(productIDs)") let request = SKProductsRequest(productIdentifiers: productIDs) request.delegate = self request.start() } func productsRequest(_ request: SKProductsRequest, didReceive response: SKProductsResponse) { DispatchQueue.main.async { self.products = response.products.sorted { $0.price.compare($1.price) == .orderedAscending } print("Successfully fetched \(self.products.count) products.") if !response.invalidProductIdentifiers.isEmpty { print("Invalid Product Identifiers: \(response.invalidProductIdentifiers)") self.purchaseMessage = NSLocalizedString("Some products could not be loaded. Please check App Store Connect.", comment: "") } else if self.products.isEmpty { print("No products were fetched. This could indicate a problem with App Store Connect configuration or network.") self.purchaseMessage = NSLocalizedString("No products available. Please try again later.", comment: "") } } } ...and the view showing the items: @StateObject private var donationManager = DonationManager() var body: some View { VStack(spacing: 24) { Spacer() // Donation options ------------------- if donationManager.products.isEmpty { ProgressView(NSLocalizedString("Loading donation options...", comment: "")) .foregroundColor(DARK_BROWN) .italic() .font(.title3) .padding(.top, 16) } else { ForEach(donationManager.products, id: \.self) { product in Button(action: { donationManager.buy(product: product) }) { HStack { Image(systemName: "cup.and.saucer.fill") .foregroundColor(.pink) Text("\(product.localizedTitle) \(product.priceLocale.currencySymbol ?? "$")\(product.price)") } .buttonStyle() } .disabled(donationManager.isPurchasing) } }
Replies
2
Boosts
0
Views
218
Activity
Jul ’25
AppStore response times for the store test environment to make purchases is very long.
I enter the payment wall, there it takes more or less 3 to 4 minutes to show the plans, when I select the monthly plan the loader is shown and from there the pop up to make the purchase in sandbox does not appear, I have waited until a maximum of 50 minutes and it is not shown, I go back and close the app I do the same steps and I am still there, without showing the pop up. Doing this same process in xcode, everything happens immediately without any interruption.
Replies
0
Boosts
1
Views
135
Activity
May ’25