Delve into the world of built-in app and system services available to developers. Discuss leveraging these services to enhance your app's functionality and user experience.

Posts under General subtopic

Post

Replies

Boosts

Views

Activity

Launching an apple watch app from the companion app
Hi, as stated in the title I'm trying to launch a watchOS app from its companion iOS app. My issue is very similar to this post: https://developer.apple.com/forums/thread/734362 The response from apple in that post says that it is not possible, but I have found it to be possible for media apps. Specifically if you turn Settings > General > Auto-Launch > Live Activities > Media Apps and turn Auto-Launch to "App". My app is for medical research and having this available would be very helpful for our testing. I need the app to be fully in the foreground. Is there a way to get specific permissions for our app to do this? Am I missing something? I've tried starting a workout session to accomplish this, but it only seems to work when the watch is charging. Any feedback is appreciated, thank you.
1
0
173
Jun ’25
Is it possible to open the Settings app programatically in watchOS?
I'm currently using Swift to write an independent Apple Watch app for watchOS 7+. My app uses Location Services, and in case the user doesn't allow that at first, I'd like to have a button inside my watchOS app to send my user to the part of the Settings app (inside watchOS) where he can give the appropriate permissions for the app. I know that in iOS/macOS you can use the openSettingsURLString string from UIApplication to do what I want, but it's not available in watchOS and I haven't found any equivalent resource inside the WKExtension class (normally the equivalent for UIApplication in the watchOS environment). Does anyone know if there's any way to programatically open the Apple Watch Settings app from my watchOS app? I'm asking since as far as I understand asking for Location permissions again would not work since the user has already refused to allow the permissions before, making the authorization status "denied". I understand as well that there's the possibility of showing a modal and directing the user to go to Settings and allow the use of location services (as in "Please go to Settings > Privacy > Location Services > [AppName] to allow the use of location services") but I'd like if I could direct the user there instead as one might do in iOS. The code below is what I'm trying to do - but (of course) it crashes since I'm not actually passing any system URL. .alert(isPresented: $alertVisible) { Alert (title: Text("Please allow our app to use location services in order to get Weather Data"), message: Text("Go to Settings?"), primaryButton: .default(Text("Settings"), action: { WKExtension.shared().openSystemURL(URL(string: "")!) //UIApplication.shared.open(URL(string: UIApplication.openSettingsURLString)!) }),
1
3
1.1k
Feb ’26
Crashes with Rosetta after Sonoma update (crash reports).
Hello. We have an app and a custom dylib hat seems to be crashing only when Rosetta is involved. I believe it's the custom DYLIB that crashes. Here are some observations. The issue happens on the older 2022 built DYLIB (Intel only) And the newer DYLIB built (Universal) The universal DYLIB works fine natively on both Intel and M1 machines. It's only when we access it through an Intel only .app and it's running with Rosetta that we see the crash. The older Intel only .DYLIB worked perfectly with the same testing .app in versions before Sonoma, now they crash with the same .app, same build. Crash reports have been all over the place, they vary but repeat themselves. It has been a little confusing as to how to approach this issue and would appreciate any input that can help us understand what is going wrong and how to move forward. Crash reports are attached Crash Report 1 Crash Report 2 Crash Report 3 The crash occurs as SIGSEGV Version: 2.0 (1) Code Type: X86-64 (Translated) Parent Process: launchd [1] User ID: 501 Date/Time: 2025-04-14 19:55:06.0103 +0200 OS Version: macOS 14.6 (23G5075b) Report Version: 12 Anonymous UUID: A08ECCFA-BF01-8636-7453-E4476586D3A8 Time Awake Since Boot: 3900 seconds System Integrity Protection: enabled Notes: PC register does not match crashing frame (0x0 vs 0x102920144) Crashed Thread: 10 Exception Type: EXC_BAD_ACCESS (SIGSEGV) Exception Codes: KERN_INVALID_ADDRESS at 0x000000011d052840 Exception Codes: 0x0000000000000001, 0x000000011d052840 Termination Reason: Namespace SIGNAL, Code 11 Segmentation fault: 11 Terminating Process: exc handler [3174] VM Region Info: 0x11d052840 is not in any region. Thank you so much for all the attention and effort.
1
0
153
Apr ’25
How to debug a CoreSpotlight extension?
My CoreSpotlight extension seems to exceed the 6 MB memory limit. What’s the best way to debug this? I've tried to attach the debugger on the Simulator but the extension seems to be never launched when I trigger the reindex from Developer settings. Is this supposed to work? On device, I am able to attach the debugger. However, I can neither transfer the debug session to Instruments, nor display the memory graph. So I've no idea how the memory is used. Any recommendations how to move forward? Is there a way to temporarily disable the memory limit since even with LLDB attached, the extension is killed.
0
1
208
Apr ’25
ShieldConfigurationExtension not working
I created a ShieldConfigurationExtension in Xcode 14.3 with File > New > Target > ShieldConfigurationExtension. This created the extension with all the necessary Info.plist values (correct NSExtensionPrincipalClass, etc.), with the extension included in embedded content in the host app target. No matter what I try, the extension is not getting invoked when I shield applications from my host app. The custom UI does not show as the shield, and looking at the debugger, an extension process is never invoked. I am shielding categories like this: let managedSettings = ManagedSettingsStore() ... managedSettings.shield.applicationCategories = .all() And my extension code overrides all the ShieldConfigurationDataSource functions. class ShieldConfigurationExtension: ShieldConfigurationDataSource { override func configuration(shielding application: Application) -> ShieldConfiguration { return ShieldConfiguration( backgroundBlurStyle: UIBlurEffect.Style.systemThickMaterial, backgroundColor: UIColor.white, icon: UIImage(systemName: "stopwatch"), title: ShieldConfiguration.Label(text: "You are in a Present Session", color: .yellow) ) } override func configuration(shielding application: Application, in category: ActivityCategory) -> ShieldConfiguration { return ShieldConfiguration( backgroundBlurStyle: UIBlurEffect.Style.systemThickMaterial, backgroundColor: UIColor.white, icon: UIImage(systemName: "stopwatch"), title: ShieldConfiguration.Label(text: "You are in a Present Session", color: .yellow) ) } override func configuration(shielding webDomain: WebDomain) -> ShieldConfiguration { return ShieldConfiguration( backgroundBlurStyle: UIBlurEffect.Style.systemThickMaterial, backgroundColor: UIColor.white, icon: UIImage(systemName: "stopwatch"), title: ShieldConfiguration.Label(text: "You are in a Present Session", color: .yellow) ) } override func configuration(shielding webDomain: WebDomain, in category: ActivityCategory) -> ShieldConfiguration { return ShieldConfiguration( backgroundBlurStyle: UIBlurEffect.Style.systemThickMaterial, backgroundColor: UIColor.white, icon: UIImage(systemName: "stopwatch"), title: ShieldConfiguration.Label(text: "You are in a Present Session", color: .yellow) ) } } What am I missing?
5
2
2.9k
Jun ’25
Can reproduce in SpeakerBox that CallKit doesn't activate audiosession when call finished by remote caller
I can reproduce the bug that CallKit doesn't active audiosession after the outgoing call put on hold because of an incoming call. VoIP calling with CallKit Steps to reproduce: Download SpeakerBox example app from the link above and start it with XCode Start a new outgoing call Call your phone from other phone Hold and Accept the call After a few secs finish the call from the other phone The outgoing call will be still on hold Click on the call and click Toggle Hold The call won't be active again because the audiosession is activated. Logs: Received provider(_:didDeactivate:) Received provider(_:didDeactivate:) Received provider(_:didDeactivate:) Received provider(_:didDeactivate:) Received provider(_:didDeactivate:) Requested transaction successfully Starting audio Type: stdio AURemoteIO.cpp:1162 failed: 561017449 (enable 3, outf< 1 ch, 44100 Hz, Float32> inf< 1 ch, 44100 Hz, Float32>) Type: Error | Timestamp: 2024-08-15 12:20:29.949437+02:00 | Process: Speakerbox | Library: libEmbeddedSystemAUs.dylib | Subsystem: com.apple.coreaudio | Category: aurioc | TID: 0x19540d AVAEInternal.h:109 [AVAudioEngineGraph.mm:1344:Initialize: (err = PerformCommand(*outputNode, kAUInitialize, NULL, 0)): error 561017449 Type: Error | Timestamp: 2024-08-15 12:20:29.949619+02:00 | Process: Speakerbox | Library: AVFAudio | Subsystem: com.apple.avfaudio | Category: avae | TID: 0x19540d Couldn't start Apple Voice Processing IO: Error Domain=com.apple.coreaudio.avfaudio Code=561017449 "(null)" UserInfo={failed call=err = PerformCommand(*outputNode, kAUInitialize, NULL, 0)} Type: Notice | Timestamp: 2024-08-15 12:20:29.949730+02:00 | Process: Speakerbox | Library: Speakerbox | TID: 0x19540d Route change: Type: Notice | Timestamp: 2024-08-15 12:20:30.167498+02:00 | Process: Speakerbox | Library: Speakerbox | TID: 0x19540d ReasonUnknown Type: Notice | Timestamp: 2024-08-15 12:20:30.167549+02:00 | Process: Speakerbox | Library: Speakerbox | TID: 0x19540d Previous route: Type: Notice | Timestamp: 2024-08-15 12:20:30.167568+02:00 | Process: Speakerbox | Library: Speakerbox | TID: 0x19540d <AVAudioSessionRouteDescription: 0x302c00bc0, inputs = ( "<AVAudioSessionPortDescription: 0x302c01330, type = MicrophoneBuiltIn; name = iPhone Mikrofon; UID = Built-In Microphone; selectedDataSource = (null)>" ); outputs = ( "<AVAudioSessionPortDescription: 0x302c004d0, type = Receiver; name = Vev\U0151; UID = Built-In Receiver; selectedDataSource = (null)>" )> Type: Notice | Timestamp: 2024-08-15 12:20:30.167626+02:00 | Process: Speakerbox | Library: Speakerbox | TID: 0x19540d
11
1
900
Jan ’26
WatchOS app not downloaded from appstore
This is a bit of a headscratcher. Xcode 16 fyi. I've written a standalone watchos app (with a stub ios app). Distributes and works perfectly over Testflight. I've submitted for app store and it passed the checks an I've released it for sale. Told my brother to use a promo code to download it and show me how it looks and report me any nuisances. He tells me there's no app neither on phone (expected) nor in watch. And he checked both the Watch ios app list and the watch. I've gone through various GPTs and they've all told me the basic troubleshooting. That his watch might not be supported (wrong, it's a watch 10 ultra with latest updates and my min supported versions are hilariously low). They've suggested that I might not have the right keys for making it standalone set, also no. They suggested that skip_install shouldn't be set to no; also wrong I think they're thinking xcode 13 and below. The stub ios app has a dependency on watchos app and also has an embed directive. I also checked the archive and saw the watchos app embedded indeed. Again, the app works perfectly fine when distributed over testflight. And AFAIK that's a release build which I know for a fact because I had a problem with not giving healthkit entitlements to release (that was another but minor headscratcher at the time, when it was working over direct xcode upload). Minor detail, I've written, test(flight)ed the app in UK and in English, my brother is in Turkey. Of course now I immediately pulled the app out of sale because I don't want people paying and getting nothing, that's gonna cause a lot of trouble. So I need any help I can get to How to debug this without exposing the app and myself: is it possible to limit the release? Obviously: what could be going wrong? How the hell did I even pass app review? Is this maybe isolated to my brother's watch? I'm more than happy to share project files and/or info.plist files(end products of them, because my plists are generated from project file).
4
0
226
Apr ’25
Call directory extension name not localised in settings iOS 15.3
I have two call directory extensions, each with InfoPlist.strings in en.lproj and nb.lproj directories. In these files I've defined CFBundleDisplayName for both locales. These names are displayed under Settings -> Phone -> Call Blocking & Identification. On iOS 12.2 the names are displayed correctly in both Norwegian and English. Testing on iOS 15.3 the English names are displayed even when device language is set to Norwegian. Worth noting: When updating the English versions of CFBundleDisplayName this is immediately reflected in Call Blocking & Identification page with Norwegian device language. As this feature requires a real device, I'm unable to test on iOS 13 and 14.
7
0
2.3k
May ’25
How is Security Delay still so broken?
I'm sitting at my house and trying to sign my test device out of my apple ID so I can sign into a Sandbox user, but now I have an hour to kill because of this terribly broken "security" feature that thinks it's in an unfamiliar location, despite being at the only location it's ever known. Looks like I'll just be disabling this feature all together. Especially as a device with Developer Mode enabled, which gets reset regularly, there should be additional options here. Come on!
0
0
74
Apr ’25
Speech Recognition Problem in iOS 18.0
It looks like Apple has added some new API(s) to SFSpeechRecognition My app, which is currently listed on App Store does feature speech recognition. Yet, trying to use it under iOS 18.0 throws errors: -[SFSpeechRecognitionTask localSpeechRecognitionClient:speechRecordingDidFail:]_block_invoke Ignoring subsequent local speech recording error: Error Domain=kAFAssistantErrorDomain Code=1101 "(null)" What happens is that after several words are transcribed and displayed, the next sentence results in previous words disappearance. That's probably what that portion of the error text - "Ignoring subsequent local speech recording error: Error Domain=kAFAssistantErrorDomain Code=1101 "(null)" means. The problem occurs ONLY when the app is running under iOS 18.0 Even when it's compiled in Xcode 16.0 using iOS 17.5 everything works fine. Any suggestions?
40
9
8.6k
Oct ’25
In Core Spotlight, it requires four consecutive characters to index the content. Only through title or displayName can the content be indexed.
In Core Spotlight, one can only index content by using title or displayName, and it requires four consecutive characters for indexing. These situations occurred in iOS 17 and 18. In iOS 16, I could not only index content by title or displayName, but also by keyword. Moreover, there was no restriction of requiring four consecutive characters. I could index my app content by simply inputting one character. Here is my code.https://github.com/kritto1/corespotlight-bug-test/tree/main @available(iOS 14, *) func addItemToIndex(_ item: QSpotlightItem) { let attributeSet = CSSearchableItemAttributeSet(contentType: .item) attributeSet.title = item.title attributeSet.displayName = item.title attributeSet.contentDescription = item.contentDescription attributeSet.keywords = item.keywords attributeSet.thumbnailData = item.thumbnailImage attributeSet.contactKeywords = item.keywords attributeSet.supportsNavigation = true let searchableItem = CSSearchableItem(uniqueIdentifier: item.id, domainIdentifier: "com.qunar.iphone.spotlight", attributeSet: attributeSet) searchableItem.expirationDate = .distantFuture CSSearchableIndex.default().indexSearchableItems([searchableItem]) { error in if let error = error { } else { } } } @available(iOS 14, *) func addToSpotlightIndex() { let spotlightHotel = QSpotlightItem( id: "corespotlight_1", title: "查询酒店住宿", contentDescription: "", thumbnailImage: UIImage(named: "img2")?.pngData(), keywords: ["酒店", "住宿"] ) addItemToIndex(spotlightHotel) let spotlightFlight = QSpotlightItem( id: "corespotlight_2", title: "查询和预订机票", contentDescription: "", thumbnailImage: UIImage(named: "img2")?.pngData(), keywords: ["查询", "预订", "机票"] ) addItemToIndex(spotlightFlight) let spotlightSight = QSpotlightItem( id: "corespotlight_3", title: "查询预订门票", contentDescription: "", thumbnailImage: UIImage(named: "img2")?.pngData(), keywords: ["查询", "预订", "门票"] ) addItemToIndex(spotlightSight) }
1
1
187
Apr ’25
Issue with DeviceActivityMonitor - eventDidReachThreshold Callback Not Triggering Properly
Hello, I'm currently experiencing an issue with the DeviceActivityMonitor extension in my code, specifically with the eventDidReachThreshold callback. I'm hoping to get some insights into why this problem occurs and how to resolve it. Problem: Issue 1: The eventDidReachThreshold callback is not triggering as expected. It appears that the callback is not being invoked when the threshold is reached. Issue 2: After a few seconds, the eventDidReachThreshold callback starts to trigger multiple times. This unexpected behavior is causing problems in my code, as it results in incorrect actions being taken. iOS version: iOS16.7.2 and iOS17.1 Xcode version: 15.0.1 Swift version: 5.9 Here is my code to start the monitoring: func startMonitoring() { var startTime : DateComponents = DateComponents(hour: 0, minute: 0) let endTime : DateComponents = DateComponents(hour: 23, minute: 59) /// Creates the schedule for the activity, specifying the start and end times, and setting it to repeat. let schedule = DeviceActivitySchedule(intervalStart: startTime, intervalEnd: endTime, repeats: true, warningTime: nil) /// Defines the event that should trigger the encouragement. let event = DeviceActivityEvent(applications: socialActivitySelection.applicationTokens, categories: socialActivitySelection.categoryTokens, webDomains: socialActivitySelection.webDomainTokens, threshold: DateComponents(minute: 2)) let events: [DeviceActivityEvent.Name: DeviceActivityEvent] = [.socialScreenTimeEvent : event] do { activityCenter.stopMonitoring([.socialScreenTime]) /// Tries to start monitoring the activity using the specified schedule and events. try activityCenter.startMonitoring(.socialScreenTime, during: schedule, events: events) } catch { /// Prints an error message if the activity could not be started. print("Could not start monitoring: \(error)") } } If there are any known workarounds or potential solutions, please share them. Thank you for your help in resolving this problem.
1
3
1.1k
Nov ’25
identitylookup needed for ILMessageFilterQueryHandling?
My iOS app uses a Message Filter extension (via ILMessageFilterQueryHandling) and works only when run directly as the extension target. When installed normally (via TestFlight), the filter does not trigger at all — which I now believe is because iOS enforces the com.apple.developer.identitylookup entitlement at runtime. Anyone know anything about this? I put in a request for the entitlement last week but heard nothing back. Called Apple "technical" support and they had no idea what I was talking about. The documentation around this is EXTREMELY lacking in my opinion...
4
0
116
Apr ’25
Universal link doesn't work after install right away
Hi! We are having a hard time with the universal link, help is appreciated! Thanks in advance! The universal link doesn't work after installation for some time. A user has to wait for from 5 to a couple of hours after the app is installed on the device. This has also affected App reviewers since we need the universal link to work for successful login. Each submission will receive a rejection of we cannot login and it will be approved until we kindly ask them to try again. I believe the JSON is delivered to devices by Apple's CDN system and the fact that it works on most devices most of the time should imply that we have a valid apple-app-site-association setup. So I am really confused about the wait time, which is giving us trouble with app review and a bad user experience
1
0
537
Apr ’25
Problem setting up AASA file (paths with queries)
In a project having both an app and a website, the following two website urls are to be handed over to the corresponding app: https://www.example.com/search?plus https://www.example.com/search?query=something In AASA file, this becomes: "components": [ { "/": "/search", "?": { "plus": "", "query": "?*" } } However, finally it does not work for both urls. Only the one with "query" works by hand over to app. For investigation, I have tried this for the problematic link: "components": [ { "/": "/search", "?": "plus" } and this works. How can I get both to work? (note that for the sake of brevity, only a portion of the AASA files are shown)
4
0
197
May ’25
Translation API & Download Language Sheet
Using Apple SwiftUI Translate library: when calling: try await session.prepareTranslation() the first time, the API's Language Download sheet does not show (or shows briefly and dismisses immediately) Even when the sheet doesn't show, the keyboard is lowered, as though the sheet would be appearing, but then the keyboard raises as though the sheet was dismissed. The following Errors are printed in the console dozens of times; but on all subsequent executions, the API Language Download sheet shows as expected. The trigger code is in a function which is executed when a Translate button is tapped. Any ideas would be welcome! Console Error on first execution only LaunchServices: store (null) or url (null) was nil: Error Domain=NSOSStatusErrorDomain Code=-54 "process may not map database" UserInfo={NSDebugDescription=process may not map database, _LSLine=72, _LSFunction=_LSServer_GetServerStoreForConnectionWithCompletionHandler} Attempt to map database failed: permission was denied. This attempt will not be retried. Failed to initialize client context with error Error Domain=NSOSStatusErrorDomain Code=-54 "process may not map database" UserInfo={NSDebugDescription=process may not map database, _LSLine=72, _LSFunction=_LSServer_GetServerStoreForConnectionWithCompletionHandler} LaunchServices: store (null) or url (null) was nil: Error Domain=NSOSStatusErrorDomain Code=-54 "process may not map database" UserInfo={NSDebugDescription=process may not map database, _LSLine=72, _LSFunction=_LSServer_GetServerStoreForConnectionWithCompletionHandler} Attempt to map database failed: permission was denied. This attempt will not be retried. Failed to initialize client context with error Error Domain=NSOSStatusErrorDomain Code=-54 "process may not map database" UserInfo={NSDebugDescription=process may not map database, _LSLine=72, _LSFunction=_LSServer_GetServerStoreForConnectionWithCompletionHandler} LaunchServices: store (null) or url (null) was nil: Error Domain=NSOSStatusErrorDomain Code=-54 "process may not map database" UserInfo={NSDebugDescription=process may not map database, _LSLine=72, _LSFunction=_LSServer_GetServerStoreForConnectionWithCompletionHandler} Attempt to map database failed: permission was denied. This attempt will not be retried. Failed to initialize client context with error Error Domain=NSOSStatusErrorDomain Code=-54 "process may not map database" UserInfo={NSDebugDescription=process may not map database, _LSLine=72, _LSFunction=_LSServer_GetServerStoreForConnectionWithCompletionHandler} Error returned from iconservicesagent image request: <ISBundleIdentifierIcon: 0x300df3c30> BundleID: (null) digest: 7749FEEE-F663-39B4-AD68-A18CFF762CCC - <ISImageDescriptor: 0x3033b26c0> - (64.00, 64.00)@2x v:4 l:5 a:0:0:0:0 t:() b:0 s:2 ps:0 digest: DF83A970-D4C9-3D90-BB7D-0BC21FC22E03 error: Error Domain=NSOSStatusErrorDomain Code=-609 "Client is disallowed from making such an icon request" UserInfo={NSLocalizedDescription=Client is disallowed from making such an icon request} Error returned from iconservicesagent image request: <ISTypeIcon: 0x300d0fb70>,Type: com.apple.appprotection.badge.faceid - <ISImageDescriptor: 0x3033ad0e0> - (32.00, 32.00)@2x v:0 l:5 a:0:0:0:0 t:() b:0 s:2 ps:0 digest: 648D7A72-90CB-3858-9409-5C554BB43B8E error: Error Domain=NSOSStatusErrorDomain Code=-609 "Client is disallowed from making such an icon request" UserInfo={NSLocalizedDescription=Client is disallowed from making such an icon request} Connection interrupted, finishing translation with error Error Domain=TranslationErrorDomain Code=14 "(null)" Got response from extension with error: Error Domain=TranslationErrorDomain Code=14 "(null)" Reported that remote UI finished but didn't get finished configuration, reporting the error as: Error Domain=TranslationErrorDomain Code=20 "(null)" VS terminated with error: Error Domain=_UIViewServiceErrorDomain Code=1 "(null)" UserInfo={Terminated=disconnect method} Reported that remote UI finished but didn't get finished configuration, reporting the error as: Error Domain=TranslationErrorDomain Code=14 "(null)" VS terminated with error: Error Domain=_UIViewServiceErrorDomain Code=1 "(null)" UserInfo={Terminated=disconnect method} VS terminated with error: Error Domain=_UIViewServiceErrorDomain Code=1 "(null)" UserInfo={Terminated=disconnect method} VS terminated with error: Error Domain=_UIViewServiceErrorDomain Code=1 "(null)" UserInfo={Terminated=disconnect method} VS terminated with error: Error Domain=_UIViewServiceErrorDomain Code=1 "(null)" UserInfo={Terminated=disconnect method} Trigger the Translation: // check if we need to create a translation configuration if configuration == nil { configuration = TranslationSession.Configuration.init( source: Locale.Language(identifier: sourceLanguageCode), target: Locale.Language(identifier: targetLanguageCode) ) } else { // or just update the target code then invalidate the config to re-trigger the refresh of .translationTask() configuration?.source = Locale.Language(identifier: sourceLanguageCode) configuration?.target = Locale.Language(identifier: targetLanguageCode) configuration?.invalidate() } Prepare and check if Download sheet should be presented: .translationTask(configuration) { session in do { // prepare translation & present API download sheet if lanugage download needed. try await session.prepareTranslation() } catch { print("Translate failed: \(error)") } }
4
0
199
May ’25
Launching an apple watch app from the companion app
Hi, as stated in the title I'm trying to launch a watchOS app from its companion iOS app. My issue is very similar to this post: https://developer.apple.com/forums/thread/734362 The response from apple in that post says that it is not possible, but I have found it to be possible for media apps. Specifically if you turn Settings > General > Auto-Launch > Live Activities > Media Apps and turn Auto-Launch to "App". My app is for medical research and having this available would be very helpful for our testing. I need the app to be fully in the foreground. Is there a way to get specific permissions for our app to do this? Am I missing something? I've tried starting a workout session to accomplish this, but it only seems to work when the watch is charging. Any feedback is appreciated, thank you.
Replies
1
Boosts
0
Views
173
Activity
Jun ’25
Is it possible to open the Settings app programatically in watchOS?
I'm currently using Swift to write an independent Apple Watch app for watchOS 7+. My app uses Location Services, and in case the user doesn't allow that at first, I'd like to have a button inside my watchOS app to send my user to the part of the Settings app (inside watchOS) where he can give the appropriate permissions for the app. I know that in iOS/macOS you can use the openSettingsURLString string from UIApplication to do what I want, but it's not available in watchOS and I haven't found any equivalent resource inside the WKExtension class (normally the equivalent for UIApplication in the watchOS environment). Does anyone know if there's any way to programatically open the Apple Watch Settings app from my watchOS app? I'm asking since as far as I understand asking for Location permissions again would not work since the user has already refused to allow the permissions before, making the authorization status "denied". I understand as well that there's the possibility of showing a modal and directing the user to go to Settings and allow the use of location services (as in "Please go to Settings > Privacy > Location Services > [AppName] to allow the use of location services") but I'd like if I could direct the user there instead as one might do in iOS. The code below is what I'm trying to do - but (of course) it crashes since I'm not actually passing any system URL. .alert(isPresented: $alertVisible) { Alert (title: Text("Please allow our app to use location services in order to get Weather Data"), message: Text("Go to Settings?"), primaryButton: .default(Text("Settings"), action: { WKExtension.shared().openSystemURL(URL(string: "")!) //UIApplication.shared.open(URL(string: UIApplication.openSettingsURLString)!) }),
Replies
1
Boosts
3
Views
1.1k
Activity
Feb ’26
AlarmKit - How many fixed-date alarms can I schedule in my app at most?
My scenario is to help users set up a full year's alarms at once. The dates for the alarms follow a specific pattern, but not fixed weekdays, so the fixed-date type is needed.
Replies
1
Boosts
2
Views
124
Activity
Jun ’25
Crashes with Rosetta after Sonoma update (crash reports).
Hello. We have an app and a custom dylib hat seems to be crashing only when Rosetta is involved. I believe it's the custom DYLIB that crashes. Here are some observations. The issue happens on the older 2022 built DYLIB (Intel only) And the newer DYLIB built (Universal) The universal DYLIB works fine natively on both Intel and M1 machines. It's only when we access it through an Intel only .app and it's running with Rosetta that we see the crash. The older Intel only .DYLIB worked perfectly with the same testing .app in versions before Sonoma, now they crash with the same .app, same build. Crash reports have been all over the place, they vary but repeat themselves. It has been a little confusing as to how to approach this issue and would appreciate any input that can help us understand what is going wrong and how to move forward. Crash reports are attached Crash Report 1 Crash Report 2 Crash Report 3 The crash occurs as SIGSEGV Version: 2.0 (1) Code Type: X86-64 (Translated) Parent Process: launchd [1] User ID: 501 Date/Time: 2025-04-14 19:55:06.0103 +0200 OS Version: macOS 14.6 (23G5075b) Report Version: 12 Anonymous UUID: A08ECCFA-BF01-8636-7453-E4476586D3A8 Time Awake Since Boot: 3900 seconds System Integrity Protection: enabled Notes: PC register does not match crashing frame (0x0 vs 0x102920144) Crashed Thread: 10 Exception Type: EXC_BAD_ACCESS (SIGSEGV) Exception Codes: KERN_INVALID_ADDRESS at 0x000000011d052840 Exception Codes: 0x0000000000000001, 0x000000011d052840 Termination Reason: Namespace SIGNAL, Code 11 Segmentation fault: 11 Terminating Process: exc handler [3174] VM Region Info: 0x11d052840 is not in any region. Thank you so much for all the attention and effort.
Replies
1
Boosts
0
Views
153
Activity
Apr ’25
How to debug a CoreSpotlight extension?
My CoreSpotlight extension seems to exceed the 6 MB memory limit. What’s the best way to debug this? I've tried to attach the debugger on the Simulator but the extension seems to be never launched when I trigger the reindex from Developer settings. Is this supposed to work? On device, I am able to attach the debugger. However, I can neither transfer the debug session to Instruments, nor display the memory graph. So I've no idea how the memory is used. Any recommendations how to move forward? Is there a way to temporarily disable the memory limit since even with LLDB attached, the extension is killed.
Replies
0
Boosts
1
Views
208
Activity
Apr ’25
ShieldConfigurationExtension not working
I created a ShieldConfigurationExtension in Xcode 14.3 with File > New > Target > ShieldConfigurationExtension. This created the extension with all the necessary Info.plist values (correct NSExtensionPrincipalClass, etc.), with the extension included in embedded content in the host app target. No matter what I try, the extension is not getting invoked when I shield applications from my host app. The custom UI does not show as the shield, and looking at the debugger, an extension process is never invoked. I am shielding categories like this: let managedSettings = ManagedSettingsStore() ... managedSettings.shield.applicationCategories = .all() And my extension code overrides all the ShieldConfigurationDataSource functions. class ShieldConfigurationExtension: ShieldConfigurationDataSource { override func configuration(shielding application: Application) -> ShieldConfiguration { return ShieldConfiguration( backgroundBlurStyle: UIBlurEffect.Style.systemThickMaterial, backgroundColor: UIColor.white, icon: UIImage(systemName: "stopwatch"), title: ShieldConfiguration.Label(text: "You are in a Present Session", color: .yellow) ) } override func configuration(shielding application: Application, in category: ActivityCategory) -> ShieldConfiguration { return ShieldConfiguration( backgroundBlurStyle: UIBlurEffect.Style.systemThickMaterial, backgroundColor: UIColor.white, icon: UIImage(systemName: "stopwatch"), title: ShieldConfiguration.Label(text: "You are in a Present Session", color: .yellow) ) } override func configuration(shielding webDomain: WebDomain) -> ShieldConfiguration { return ShieldConfiguration( backgroundBlurStyle: UIBlurEffect.Style.systemThickMaterial, backgroundColor: UIColor.white, icon: UIImage(systemName: "stopwatch"), title: ShieldConfiguration.Label(text: "You are in a Present Session", color: .yellow) ) } override func configuration(shielding webDomain: WebDomain, in category: ActivityCategory) -> ShieldConfiguration { return ShieldConfiguration( backgroundBlurStyle: UIBlurEffect.Style.systemThickMaterial, backgroundColor: UIColor.white, icon: UIImage(systemName: "stopwatch"), title: ShieldConfiguration.Label(text: "You are in a Present Session", color: .yellow) ) } } What am I missing?
Replies
5
Boosts
2
Views
2.9k
Activity
Jun ’25
Cannot submit App with "Default Translation Extension"
We developed a "Default Translation App" following the guide: https://developer.apple.com/documentation/translationuiprovider/preparing-your-app-to-be-the-default-translation-app. I have already configured everything that needs to be configured according to the document, but there is still this problem
Replies
0
Boosts
0
Views
44
Activity
Apr ’25
Can reproduce in SpeakerBox that CallKit doesn't activate audiosession when call finished by remote caller
I can reproduce the bug that CallKit doesn't active audiosession after the outgoing call put on hold because of an incoming call. VoIP calling with CallKit Steps to reproduce: Download SpeakerBox example app from the link above and start it with XCode Start a new outgoing call Call your phone from other phone Hold and Accept the call After a few secs finish the call from the other phone The outgoing call will be still on hold Click on the call and click Toggle Hold The call won't be active again because the audiosession is activated. Logs: Received provider(_:didDeactivate:) Received provider(_:didDeactivate:) Received provider(_:didDeactivate:) Received provider(_:didDeactivate:) Received provider(_:didDeactivate:) Requested transaction successfully Starting audio Type: stdio AURemoteIO.cpp:1162 failed: 561017449 (enable 3, outf< 1 ch, 44100 Hz, Float32> inf< 1 ch, 44100 Hz, Float32>) Type: Error | Timestamp: 2024-08-15 12:20:29.949437+02:00 | Process: Speakerbox | Library: libEmbeddedSystemAUs.dylib | Subsystem: com.apple.coreaudio | Category: aurioc | TID: 0x19540d AVAEInternal.h:109 [AVAudioEngineGraph.mm:1344:Initialize: (err = PerformCommand(*outputNode, kAUInitialize, NULL, 0)): error 561017449 Type: Error | Timestamp: 2024-08-15 12:20:29.949619+02:00 | Process: Speakerbox | Library: AVFAudio | Subsystem: com.apple.avfaudio | Category: avae | TID: 0x19540d Couldn't start Apple Voice Processing IO: Error Domain=com.apple.coreaudio.avfaudio Code=561017449 "(null)" UserInfo={failed call=err = PerformCommand(*outputNode, kAUInitialize, NULL, 0)} Type: Notice | Timestamp: 2024-08-15 12:20:29.949730+02:00 | Process: Speakerbox | Library: Speakerbox | TID: 0x19540d Route change: Type: Notice | Timestamp: 2024-08-15 12:20:30.167498+02:00 | Process: Speakerbox | Library: Speakerbox | TID: 0x19540d ReasonUnknown Type: Notice | Timestamp: 2024-08-15 12:20:30.167549+02:00 | Process: Speakerbox | Library: Speakerbox | TID: 0x19540d Previous route: Type: Notice | Timestamp: 2024-08-15 12:20:30.167568+02:00 | Process: Speakerbox | Library: Speakerbox | TID: 0x19540d <AVAudioSessionRouteDescription: 0x302c00bc0, inputs = ( "<AVAudioSessionPortDescription: 0x302c01330, type = MicrophoneBuiltIn; name = iPhone Mikrofon; UID = Built-In Microphone; selectedDataSource = (null)>" ); outputs = ( "<AVAudioSessionPortDescription: 0x302c004d0, type = Receiver; name = Vev\U0151; UID = Built-In Receiver; selectedDataSource = (null)>" )> Type: Notice | Timestamp: 2024-08-15 12:20:30.167626+02:00 | Process: Speakerbox | Library: Speakerbox | TID: 0x19540d
Replies
11
Boosts
1
Views
900
Activity
Jan ’26
WatchOS app not downloaded from appstore
This is a bit of a headscratcher. Xcode 16 fyi. I've written a standalone watchos app (with a stub ios app). Distributes and works perfectly over Testflight. I've submitted for app store and it passed the checks an I've released it for sale. Told my brother to use a promo code to download it and show me how it looks and report me any nuisances. He tells me there's no app neither on phone (expected) nor in watch. And he checked both the Watch ios app list and the watch. I've gone through various GPTs and they've all told me the basic troubleshooting. That his watch might not be supported (wrong, it's a watch 10 ultra with latest updates and my min supported versions are hilariously low). They've suggested that I might not have the right keys for making it standalone set, also no. They suggested that skip_install shouldn't be set to no; also wrong I think they're thinking xcode 13 and below. The stub ios app has a dependency on watchos app and also has an embed directive. I also checked the archive and saw the watchos app embedded indeed. Again, the app works perfectly fine when distributed over testflight. And AFAIK that's a release build which I know for a fact because I had a problem with not giving healthkit entitlements to release (that was another but minor headscratcher at the time, when it was working over direct xcode upload). Minor detail, I've written, test(flight)ed the app in UK and in English, my brother is in Turkey. Of course now I immediately pulled the app out of sale because I don't want people paying and getting nothing, that's gonna cause a lot of trouble. So I need any help I can get to How to debug this without exposing the app and myself: is it possible to limit the release? Obviously: what could be going wrong? How the hell did I even pass app review? Is this maybe isolated to my brother's watch? I'm more than happy to share project files and/or info.plist files(end products of them, because my plists are generated from project file).
Replies
4
Boosts
0
Views
226
Activity
Apr ’25
Call directory extension name not localised in settings iOS 15.3
I have two call directory extensions, each with InfoPlist.strings in en.lproj and nb.lproj directories. In these files I've defined CFBundleDisplayName for both locales. These names are displayed under Settings -> Phone -> Call Blocking & Identification. On iOS 12.2 the names are displayed correctly in both Norwegian and English. Testing on iOS 15.3 the English names are displayed even when device language is set to Norwegian. Worth noting: When updating the English versions of CFBundleDisplayName this is immediately reflected in Call Blocking & Identification page with Norwegian device language. As this feature requires a real device, I'm unable to test on iOS 13 and 14.
Replies
7
Boosts
0
Views
2.3k
Activity
May ’25
How is Security Delay still so broken?
I'm sitting at my house and trying to sign my test device out of my apple ID so I can sign into a Sandbox user, but now I have an hour to kill because of this terribly broken "security" feature that thinks it's in an unfamiliar location, despite being at the only location it's ever known. Looks like I'll just be disabling this feature all together. Especially as a device with Developer Mode enabled, which gets reset regularly, there should be additional options here. Come on!
Replies
0
Boosts
0
Views
74
Activity
Apr ’25
Speech Recognition Problem in iOS 18.0
It looks like Apple has added some new API(s) to SFSpeechRecognition My app, which is currently listed on App Store does feature speech recognition. Yet, trying to use it under iOS 18.0 throws errors: -[SFSpeechRecognitionTask localSpeechRecognitionClient:speechRecordingDidFail:]_block_invoke Ignoring subsequent local speech recording error: Error Domain=kAFAssistantErrorDomain Code=1101 "(null)" What happens is that after several words are transcribed and displayed, the next sentence results in previous words disappearance. That's probably what that portion of the error text - "Ignoring subsequent local speech recording error: Error Domain=kAFAssistantErrorDomain Code=1101 "(null)" means. The problem occurs ONLY when the app is running under iOS 18.0 Even when it's compiled in Xcode 16.0 using iOS 17.5 everything works fine. Any suggestions?
Replies
40
Boosts
9
Views
8.6k
Activity
Oct ’25
In Core Spotlight, it requires four consecutive characters to index the content. Only through title or displayName can the content be indexed.
In Core Spotlight, one can only index content by using title or displayName, and it requires four consecutive characters for indexing. These situations occurred in iOS 17 and 18. In iOS 16, I could not only index content by title or displayName, but also by keyword. Moreover, there was no restriction of requiring four consecutive characters. I could index my app content by simply inputting one character. Here is my code.https://github.com/kritto1/corespotlight-bug-test/tree/main @available(iOS 14, *) func addItemToIndex(_ item: QSpotlightItem) { let attributeSet = CSSearchableItemAttributeSet(contentType: .item) attributeSet.title = item.title attributeSet.displayName = item.title attributeSet.contentDescription = item.contentDescription attributeSet.keywords = item.keywords attributeSet.thumbnailData = item.thumbnailImage attributeSet.contactKeywords = item.keywords attributeSet.supportsNavigation = true let searchableItem = CSSearchableItem(uniqueIdentifier: item.id, domainIdentifier: "com.qunar.iphone.spotlight", attributeSet: attributeSet) searchableItem.expirationDate = .distantFuture CSSearchableIndex.default().indexSearchableItems([searchableItem]) { error in if let error = error { } else { } } } @available(iOS 14, *) func addToSpotlightIndex() { let spotlightHotel = QSpotlightItem( id: "corespotlight_1", title: "查询酒店住宿", contentDescription: "", thumbnailImage: UIImage(named: "img2")?.pngData(), keywords: ["酒店", "住宿"] ) addItemToIndex(spotlightHotel) let spotlightFlight = QSpotlightItem( id: "corespotlight_2", title: "查询和预订机票", contentDescription: "", thumbnailImage: UIImage(named: "img2")?.pngData(), keywords: ["查询", "预订", "机票"] ) addItemToIndex(spotlightFlight) let spotlightSight = QSpotlightItem( id: "corespotlight_3", title: "查询预订门票", contentDescription: "", thumbnailImage: UIImage(named: "img2")?.pngData(), keywords: ["查询", "预订", "门票"] ) addItemToIndex(spotlightSight) }
Replies
1
Boosts
1
Views
187
Activity
Apr ’25
Issue with DeviceActivityMonitor - eventDidReachThreshold Callback Not Triggering Properly
Hello, I'm currently experiencing an issue with the DeviceActivityMonitor extension in my code, specifically with the eventDidReachThreshold callback. I'm hoping to get some insights into why this problem occurs and how to resolve it. Problem: Issue 1: The eventDidReachThreshold callback is not triggering as expected. It appears that the callback is not being invoked when the threshold is reached. Issue 2: After a few seconds, the eventDidReachThreshold callback starts to trigger multiple times. This unexpected behavior is causing problems in my code, as it results in incorrect actions being taken. iOS version: iOS16.7.2 and iOS17.1 Xcode version: 15.0.1 Swift version: 5.9 Here is my code to start the monitoring: func startMonitoring() { var startTime : DateComponents = DateComponents(hour: 0, minute: 0) let endTime : DateComponents = DateComponents(hour: 23, minute: 59) /// Creates the schedule for the activity, specifying the start and end times, and setting it to repeat. let schedule = DeviceActivitySchedule(intervalStart: startTime, intervalEnd: endTime, repeats: true, warningTime: nil) /// Defines the event that should trigger the encouragement. let event = DeviceActivityEvent(applications: socialActivitySelection.applicationTokens, categories: socialActivitySelection.categoryTokens, webDomains: socialActivitySelection.webDomainTokens, threshold: DateComponents(minute: 2)) let events: [DeviceActivityEvent.Name: DeviceActivityEvent] = [.socialScreenTimeEvent : event] do { activityCenter.stopMonitoring([.socialScreenTime]) /// Tries to start monitoring the activity using the specified schedule and events. try activityCenter.startMonitoring(.socialScreenTime, during: schedule, events: events) } catch { /// Prints an error message if the activity could not be started. print("Could not start monitoring: \(error)") } } If there are any known workarounds or potential solutions, please share them. Thank you for your help in resolving this problem.
Replies
1
Boosts
3
Views
1.1k
Activity
Nov ’25
identitylookup needed for ILMessageFilterQueryHandling?
My iOS app uses a Message Filter extension (via ILMessageFilterQueryHandling) and works only when run directly as the extension target. When installed normally (via TestFlight), the filter does not trigger at all — which I now believe is because iOS enforces the com.apple.developer.identitylookup entitlement at runtime. Anyone know anything about this? I put in a request for the entitlement last week but heard nothing back. Called Apple "technical" support and they had no idea what I was talking about. The documentation around this is EXTREMELY lacking in my opinion...
Replies
4
Boosts
0
Views
116
Activity
Apr ’25
Universal link doesn't work after install right away
Hi! We are having a hard time with the universal link, help is appreciated! Thanks in advance! The universal link doesn't work after installation for some time. A user has to wait for from 5 to a couple of hours after the app is installed on the device. This has also affected App reviewers since we need the universal link to work for successful login. Each submission will receive a rejection of we cannot login and it will be approved until we kindly ask them to try again. I believe the JSON is delivered to devices by Apple's CDN system and the fact that it works on most devices most of the time should imply that we have a valid apple-app-site-association setup. So I am really confused about the wait time, which is giving us trouble with app review and a bad user experience
Replies
1
Boosts
0
Views
537
Activity
Apr ’25
Apple watch 天气问题
在watchOS11.5下,Apple watch无法加载天气。无论是否连接自己的iPhone均无法加载
Replies
0
Boosts
0
Views
237
Activity
May ’25
Problem setting up AASA file (paths with queries)
In a project having both an app and a website, the following two website urls are to be handed over to the corresponding app: https://www.example.com/search?plus https://www.example.com/search?query=something In AASA file, this becomes: "components": [ { "/": "/search", "?": { "plus": "", "query": "?*" } } However, finally it does not work for both urls. Only the one with "query" works by hand over to app. For investigation, I have tried this for the problematic link: "components": [ { "/": "/search", "?": "plus" } and this works. How can I get both to work? (note that for the sake of brevity, only a portion of the AASA files are shown)
Replies
4
Boosts
0
Views
197
Activity
May ’25
CallKit-linked Caller not displayed on iOS 18 CarPlay.
Since I updated to iOS 18, CallKit-linked caller not display on screen of CarPlay. CarPlay display only "{App Name} Caller ID". When iOS version was 17.x, CarPlay displayed caller name of CallKit-linked contact. I think CarPlay should perform the same function as iOS 17. Please review it.
Replies
4
Boosts
2
Views
521
Activity
Nov ’25
Translation API & Download Language Sheet
Using Apple SwiftUI Translate library: when calling: try await session.prepareTranslation() the first time, the API's Language Download sheet does not show (or shows briefly and dismisses immediately) Even when the sheet doesn't show, the keyboard is lowered, as though the sheet would be appearing, but then the keyboard raises as though the sheet was dismissed. The following Errors are printed in the console dozens of times; but on all subsequent executions, the API Language Download sheet shows as expected. The trigger code is in a function which is executed when a Translate button is tapped. Any ideas would be welcome! Console Error on first execution only LaunchServices: store (null) or url (null) was nil: Error Domain=NSOSStatusErrorDomain Code=-54 "process may not map database" UserInfo={NSDebugDescription=process may not map database, _LSLine=72, _LSFunction=_LSServer_GetServerStoreForConnectionWithCompletionHandler} Attempt to map database failed: permission was denied. This attempt will not be retried. Failed to initialize client context with error Error Domain=NSOSStatusErrorDomain Code=-54 "process may not map database" UserInfo={NSDebugDescription=process may not map database, _LSLine=72, _LSFunction=_LSServer_GetServerStoreForConnectionWithCompletionHandler} LaunchServices: store (null) or url (null) was nil: Error Domain=NSOSStatusErrorDomain Code=-54 "process may not map database" UserInfo={NSDebugDescription=process may not map database, _LSLine=72, _LSFunction=_LSServer_GetServerStoreForConnectionWithCompletionHandler} Attempt to map database failed: permission was denied. This attempt will not be retried. Failed to initialize client context with error Error Domain=NSOSStatusErrorDomain Code=-54 "process may not map database" UserInfo={NSDebugDescription=process may not map database, _LSLine=72, _LSFunction=_LSServer_GetServerStoreForConnectionWithCompletionHandler} LaunchServices: store (null) or url (null) was nil: Error Domain=NSOSStatusErrorDomain Code=-54 "process may not map database" UserInfo={NSDebugDescription=process may not map database, _LSLine=72, _LSFunction=_LSServer_GetServerStoreForConnectionWithCompletionHandler} Attempt to map database failed: permission was denied. This attempt will not be retried. Failed to initialize client context with error Error Domain=NSOSStatusErrorDomain Code=-54 "process may not map database" UserInfo={NSDebugDescription=process may not map database, _LSLine=72, _LSFunction=_LSServer_GetServerStoreForConnectionWithCompletionHandler} Error returned from iconservicesagent image request: <ISBundleIdentifierIcon: 0x300df3c30> BundleID: (null) digest: 7749FEEE-F663-39B4-AD68-A18CFF762CCC - <ISImageDescriptor: 0x3033b26c0> - (64.00, 64.00)@2x v:4 l:5 a:0:0:0:0 t:() b:0 s:2 ps:0 digest: DF83A970-D4C9-3D90-BB7D-0BC21FC22E03 error: Error Domain=NSOSStatusErrorDomain Code=-609 "Client is disallowed from making such an icon request" UserInfo={NSLocalizedDescription=Client is disallowed from making such an icon request} Error returned from iconservicesagent image request: <ISTypeIcon: 0x300d0fb70>,Type: com.apple.appprotection.badge.faceid - <ISImageDescriptor: 0x3033ad0e0> - (32.00, 32.00)@2x v:0 l:5 a:0:0:0:0 t:() b:0 s:2 ps:0 digest: 648D7A72-90CB-3858-9409-5C554BB43B8E error: Error Domain=NSOSStatusErrorDomain Code=-609 "Client is disallowed from making such an icon request" UserInfo={NSLocalizedDescription=Client is disallowed from making such an icon request} Connection interrupted, finishing translation with error Error Domain=TranslationErrorDomain Code=14 "(null)" Got response from extension with error: Error Domain=TranslationErrorDomain Code=14 "(null)" Reported that remote UI finished but didn't get finished configuration, reporting the error as: Error Domain=TranslationErrorDomain Code=20 "(null)" VS terminated with error: Error Domain=_UIViewServiceErrorDomain Code=1 "(null)" UserInfo={Terminated=disconnect method} Reported that remote UI finished but didn't get finished configuration, reporting the error as: Error Domain=TranslationErrorDomain Code=14 "(null)" VS terminated with error: Error Domain=_UIViewServiceErrorDomain Code=1 "(null)" UserInfo={Terminated=disconnect method} VS terminated with error: Error Domain=_UIViewServiceErrorDomain Code=1 "(null)" UserInfo={Terminated=disconnect method} VS terminated with error: Error Domain=_UIViewServiceErrorDomain Code=1 "(null)" UserInfo={Terminated=disconnect method} VS terminated with error: Error Domain=_UIViewServiceErrorDomain Code=1 "(null)" UserInfo={Terminated=disconnect method} Trigger the Translation: // check if we need to create a translation configuration if configuration == nil { configuration = TranslationSession.Configuration.init( source: Locale.Language(identifier: sourceLanguageCode), target: Locale.Language(identifier: targetLanguageCode) ) } else { // or just update the target code then invalidate the config to re-trigger the refresh of .translationTask() configuration?.source = Locale.Language(identifier: sourceLanguageCode) configuration?.target = Locale.Language(identifier: targetLanguageCode) configuration?.invalidate() } Prepare and check if Download sheet should be presented: .translationTask(configuration) { session in do { // prepare translation & present API download sheet if lanugage download needed. try await session.prepareTranslation() } catch { print("Translate failed: \(error)") } }
Replies
4
Boosts
0
Views
199
Activity
May ’25