First time working with DEXT, so I'm trying to make "Communicating between a DriverKit extension and a client app" sample project to work and I'm having trouble. I'm following the steps for "Automatically manage signing". It seems that the step “Sign to Run Locally” is wrong now, so I let it to Apple Developer. Now I have a Provisioning Profile error that says it doesn't include the com.apple.developer.driverkit.allow-any-userclient-access entitlement. If I go to Certificates, Identifiers and Profiles for this AppID and go to Capability Requests and select DriverKit Allow Any UserClient Access, this bring me to a page where I select DriverKit Entitlement but Any UserClient Access is not a choice. I tried asking for UserClient Access but the request has been denied saying that the engineering team does not think these entitlements are necessary for testing locally. So I removed com.apple.developer.driverkit.allow-any-userclient-access from NullDriver.entitlements. I can now install the DEXT but when I try "Communicate with Dext" button, I received the error: Failed opening connection to dext with error: 0xe00002e2. Looking in the console, I see this error message: DK: NullDriverUserClient-0x10000ad6a:UC failed userclient-access check, needed bundle ID com.example.apple-samplecode.dext-to-user-client-2-TEST.driver I tried many things, but I can't seem to be able to pass through the check to allow the application to communicate with the dext. What am I missing? Note that I'm focusing only on macOS, not iOS. Thanks.

Hello, I'm trying to make a DEXT for a thunderbolt device. I started from the DriverKit template that does a very simple Hello World. I added the DriverKit PCI (development) entitlement in the developer portal. The dext is installed and activated but when I connect my thunderbolt device this is what I see in the console log: kernel DK: mydrv-0x100010a85 waiting for server com.mycompany.mydrvApp.mydrv-100010a85 kernel Driver com.mycompany.mydrvApp.mydrv has crashed 0 time(s) kernelmanagerd Launching dext com.mycompany.mydrvApp.mydrv com.mycompany.mydrvApp.mydrv 0x100010a81 e675cb5ca6b6650163cc231c6af2f7e730b56b0bf394b857ce76f8e3105eb0f1 kernel DK: mydrv-0x100010a89 waiting for server com.mycompany.mydrvApp.mydrv-100010a89 kernelmanagerd Launching driver extension: Dext com.mycompany.mydrvApp.mydrv v1 in executable dext bundle com.mycompany.mydrvApp.mydrv at /Library/SystemExtensions/DC2F3964-043D-445E-A6CF-A9D7C529B39A/com.mycompany.mydrvApp.mydrv.dext default 16:52:31.551867-0500 kernel /Library/SystemExtensions/DC2F3964-043D-445E-A6CF-A9D7C529B39A/com.mycompany.mydrvApp.mydrv.dext/com.mycompany.mydrvApp.mydrv[15788] ==> com.apple.dext kernelmanagerd Found 1 dexts with bundle identifier com.mycompany.mydrvApp.mydrv kernelmanagerd Using unique id e675cb5ca6b6650163cc231c6af2f7e730b56b0bf394b857ce76f8e3105eb0f1 to pick dext matching bundle identifier com.mycompany.mydrvApp.mydrv kernelmanagerd Picked matching dext for bundle identifier com.mycompany.mydrvApp.mydrv: Dext com.mycompany.mydrvApp.mydrv v1 in executable dext bundle com.mycompany.mydrvApp.mydrv at /Library/SystemExtensions/DC2F3964-043D-445E-A6CF-A9D7C529B39A/com.mycompany.mydrvApp.mydrv.dext kernelmanagerd Launching dext com.mycompany.mydrvApp.mydrv com.mycompany.mydrvApp.mydrv 0x100010a85 e675cb5ca6b6650163cc231c6af2f7e730b56b0bf394b857ce76f8e3105eb0f1 kernel DK: com.mycompany.mydrvApp.mydrv[15788] has team identifier L86BQ63GK2 kernelmanagerd Launching driver extension: Dext com.mycompany.mydrvApp.mydrv v1 in executable dext bundle com.mycompany.mydrvApp.mydrv at /Library/SystemExtensions/DC2F3964-043D-445E-A6CF-A9D7C529B39A/com.mycompany.mydrvApp.mydrv.dext kernel kernel DK: mydrv-0x100010a81: provider entitlements check failed kernel DK: IOUserServer(com.mycompany.mydrvApp.mydrv-0x100010a81)-0x100010a8a::exit(Entitlements check failed) What am I missing for the check to pass? Here is my mydrv.entitlements file: I tried adding IOPCIPrimaryMatch with my vendor id in info.plist, but with same result. Developer mode is on and SIP is disabled. Thanks

I am developing a DriverKit driver with the goal of sending vendor-specific commands to a USB storage device. I have successfully created the DriverKit driver, and when I connect the USB storage device, it appears correctly in IORegistryExplorer. My driver class inherits from IOUserSCSIPeripheralDeviceType00 in the SCSIPeripheralsDriverKit framework. I also created a UserClient class that inherits from IOUserClient, and from its ExternalMethod I tried sending an INQUIRY command as a basic test to confirm that command transmission works. However, the device returns an ILLEGAL REQUEST (Sense Key 0x5 / ASC 0x20). Could someone advise what I might be doing wrong? Below are the logs output from the driver: 2025-11-14 21:00:43.573730+0900 0x26e9 Default 0x0 0 0 kernel: (SampleDriverKitApp.SampleDriverKitDriver.dext) [DEBUG] Driver - NewUserClient() - Finished. 2025-11-14 21:00:43.573733+0900 0x26e9 Default 0x0 0 0 kernel: (SampleDriverKitApp.SampleDriverKitDriver.dext) [DEBUG] UserClient - Start() 2025-11-14 21:00:43.573807+0900 0x26e9 Default 0x0 0 0 kernel: (SampleDriverKitApp.SampleDriverKitDriver.dext) [DEBUG] UserClient - Start() - Finished. 2025-11-14 21:00:43.574249+0900 0x26e9 Default 0x0 0 0 kernel: (SampleDriverKitApp.SampleDriverKitDriver.dext) [DEBUG] UserClient - ExternalMethod() called 2025-11-14 21:00:43.574258+0900 0x26e9 Default 0x0 0 0 kernel: (SampleDriverKitApp.SampleDriverKitDriver.dext) [DEBUG] UserClient - ----- SCSICmdINQUIRY ----- 2025-11-14 21:00:43.574268+0900 0x26e9 Default 0x0 0 0 kernel: (SampleDriverKitApp.SampleDriverKitDriver.dext) [DEBUG] UserClient - command.fRequestedByteCountOfTransfer = 512 2025-11-14 21:00:43.575980+0900 0x26e9 Default 0x0 0 0 kernel: (SampleDriverKitApp.SampleDriverKitDriver.dext) [DEBUG] UserClient - SCSICmdINQUIRY() UserSendCDB fCompletionStatus = 0x0 2025-11-14 21:00:43.575988+0900 0x26e9 Default 0x0 0 0 kernel: (SampleDriverKitApp.SampleDriverKitDriver.dext) [DEBUG] UserClient - SCSICmdINQUIRY() UserSendCDB fServiceResponse = 0x2 2025-11-14 21:00:43.575990+0900 0x26e9 Default 0x0 0 0 kernel: (SampleDriverKitApp.SampleDriverKitDriver.dext) [DEBUG] UserClient - SCSICmdINQUIRY() UserSendCDB fSenseDataValid = 0x1 2025-11-14 21:00:43.575992+0900 0x26e9 Default 0x0 0 0 kernel: (SampleDriverKitApp.SampleDriverKitDriver.dext) [DEBUG] UserClient - SCSICmdINQUIRY() UserSendCDB VALID_RESPONSE_CODE = 0x70 2025-11-14 21:00:43.575994+0900 0x26e9 Default 0x0 0 0 kernel: (SampleDriverKitApp.SampleDriverKitDriver.dext) [DEBUG] UserClient - SCSICmdINQUIRY() UserSendCDB SENSE_KEY = 0x5 2025-11-14 21:00:43.575996+0900 0x26e9 Default 0x0 0 0 kernel: (SampleDriverKitApp.SampleDriverKitDriver.dext) [DEBUG] UserClient - SCSICmdINQUIRY() UserSendCDB ADDITIONAL_SENSE_CODE = 0x20 2025-11-14 21:00:43.575998+0900 0x26e9 Default 0x0 0 0 kernel: (SampleDriverKitApp.SampleDriverKitDriver.dext) [DEBUG] UserClient - SCSICmdINQUIRY() UserSendCDB ADDITIONAL_SENSE_CODE_QUALIFIER = 0x0 Here is the UserClient class: class SampleDriverKitUserClient: public IOUserClient { public: virtual bool init(void) override; virtual kern_return_t Start(IOService* provider) override; virtual kern_return_t Stop(IOService* provider) override; virtual void free(void) override; virtual kern_return_t ExternalMethod( uint64_t selector, IOUserClientMethodArguments* arguments, const IOUserClientMethodDispatch* dispatch, OSObject* target, void* reference) override; void SCSICmdINQUIRY(SampleDriverKitDriver *driver) LOCALONLY; }; Here is the part that sends the INQUIRY command: void SampleDriverKitUserClient::SCSICmdINQUIRY(SampleDriverKitDriver *driver) { kern_return_t kr = KERN_SUCCESS; SCSIType00OutParameters command = {}; UInt8 dataBuffer[512] = {0}; SCSI_Sense_Data senseData = {0}; Log("----- SCSICmdINQUIRY -----"); SetCommandCDB(&command.fCommandDescriptorBlock, 0x12, 0x00, 0x00, 0x24, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00); command.fLogicalUnitNumber = 0; command.fTimeoutDuration = 10000; // milliseconds command.fRequestedByteCountOfTransfer = sizeof(dataBuffer); Log("command.fRequestedByteCountOfTransfer = %lld", command.fRequestedByteCountOfTransfer); command.fBufferDirection = kIOMemoryDirectionIn; command.fDataTransferDirection = kSCSIDataTransfer_FromTargetToInitiator; command.fDataBufferAddr = reinterpret_cast<uint64_t>(dataBuffer); command.fSenseBufferAddr = reinterpret_cast<uint64_t>(&senseData); command.fSenseLengthRequested = sizeof(senseData); if( driver ) { SCSIType00InParameters response = {}; kr = driver->UserSendCDB(command, &response); if( kr != KERN_SUCCESS ) { Log("SCSICmdINQUIRY() UserSendCDB failed (0x%x)", kr); return; } Log("SCSICmdINQUIRY() UserSendCDB fCompletionStatus = 0x%x", response.fCompletionStatus); Log("SCSICmdINQUIRY() UserSendCDB fServiceResponse = 0x%x", response.fServiceResponse); Log("SCSICmdINQUIRY() UserSendCDB fSenseDataValid = 0x%x", response.fSenseDataValid); Log("SCSICmdINQUIRY() UserSendCDB VALID_RESPONSE_CODE = 0x%x", senseData.VALID_RESPONSE_CODE); Log("SCSICmdINQUIRY() UserSendCDB SENSE_KEY = 0x%x", senseData.SENSE_KEY); Log("SCSICmdINQUIRY() UserSendCDB ADDITIONAL_SENSE_CODE = 0x%x", senseData.ADDITIONAL_SENSE_CODE); Log("SCSICmdINQUIRY() UserSendCDB ADDITIONAL_SENSE_CODE_QUALIFIER = 0x%x", senseData.ADDITIONAL_SENSE_CODE_QUALIFIER); if( response.fServiceResponse == kSCSIServiceResponse_TASK_COMPLETE ) { Log("SCSICmdINQUIRY() UserSendCDB complete success!!"); } for( int i=0; i < 5; i++ ) { Log("data [%04d]=0x%x [%04d]=0x%x [%04d]=0x%x [%04d]=0x%x [%04d]=0x%x [%04d]=0x%x [%04d]=0x%x [%04d]=0x%x", i*8+0, dataBuffer[i*8+0], i*8+1, dataBuffer[i*8+1], i*8+2, dataBuffer[i*8+2], i*8+3, dataBuffer[i*8+3], i*8+4, dataBuffer[i*8+4], i*8+5, dataBuffer[i*8+5], i*8+6, dataBuffer[i*8+6], i*8+7, dataBuffer[i*8+7] ); } char vendorID[9] = {0}; memcpy(vendorID, &dataBuffer[8], 8); Log("vendorID = %s",vendorID); char productID[17] = {0}; memcpy(productID, &dataBuffer[16], 16); Log("productID = %s",productID); } } My environment is: MacBook Pro (M2), macOS 15.6 If anyone has insight into what causes the ILLEGAL REQUEST, or what I am missing when using IOUserSCSIPeripheralDeviceType00 and UserSendCDB, I would greatly appreciate your help. Thank you.

Dear Apple CS, I’m working with NFC ISO15693 tags using NFCTagReaderSession / NFCISO15693Tag, and I’d like to read these tags in the background if possible. Is there any way to read this tag type without triggering the system NFC popup that iOS normally shows? Please note it will not be a public app, the app is meant for internal use for our employees only. is there an option to submit a special request for this use case? Thank you in advance!

I'm developing a CarPlay app and encountered an inconsistent behavior with template detection. When I present a CPActionSheetTemplate and then print the presentedTemplate property, it returns nil. However, when I present a CPAlertTemplate, the presentedTemplate property correctly returns the template object. This inconsistency is causing issues in my app where I need to check if there's already a presented template before showing another one to avoid conflicts. Why does CPActionSheetTemplate not get detected in presentedTemplate while CPAlertTemplate does? Is this intended behavior or a bug? Any guidance on how to properly detect if a CPActionSheetTemplate is currently presented would be greatly appreciated.

Hello I'm testing an 'age range sharing' feature using the AgeRangeService API in an app we service. I approved 'Age Sharing' during testing. (For your information, my account is an adult account.) For repeat testing, I would like to delete the our app from 'Apps that requested user age information' or cancel the sharing status. However, there doesn't seem to be such a feature. Is there a way I can't find, or is this a feature that Apple doesn't offer?

We are developing a DriverKit driver on Apple M1. We use the following code to prepare DMA buffer: IODMACommandSpecification dmaSpecification; bzero(&dmaSpecification, sizeof(dmaSpecification)); dmaSpecification.options = kIODMACommandSpecificationNoOptions; dmaSpecification.maxAddressBits = p_dma_mgr->maxAddressBits; kret = IODMACommand::Create(p_dma_mgr->device, kIODMACommandCreateNoOptions, &dmaSpecification, &impl->dma_cmd ); if (kret != kIOReturnSuccess) { os_log(OS_LOG_DEFAULT, "Error: IODMACommand::Create failed! ret=0x%x\n", kret); impl->user_mem.reset(); IOFree(impl, sizeof(*impl)); return ret; } uint64_t flags = 0; uint32_t segmentsCount = 32; IOAddressSegment segments[32]; kret = impl->dma_cmd->PrepareForDMA(kIODMACommandPrepareForDMANoOptions, impl->user_mem.get(), 0, 0, // 0 for entire memory &flags, &segmentsCount, segments ); if (kret != kIOReturnSuccess) { OSSafeReleaseNULL(impl->dma_cmd); impl->user_mem.reset(); IOFree(impl, sizeof(*impl)); os_log(OS_LOG_DEFAULT, "Error: PrepareForDMA failed! ret=0x%x\n", kret); return kret; } I allocated several 8K BGRA video frames, each with a size of 141557760 bytes, and prepared the DMA according to the method mentioned above. The process was successful when the number of frames was 15 or fewer. However, issues arose when allocating 16 frames: Error: PrepareForDMA failed! ret=0xe00002bd By calculating, I found that the total size of 16 video frames exceeds 2GB. Is there such a limitation in DriverKit that the total DMA size cannot exceed 2GB? Are there any methods that would allow me to bypass this restriction so I can use more video frame buffers?

Just wanted to check here to see if anyone else is running into the issue of CarPlay not working at all on iOS 26 Beta 1, even with the update on Friday. I plug my phone in (wired) and CarPlay never shows up. I've seen a Reddit thread where other folks are seeing the same thing.

Hi all, We are migrating a SCSI HBA driver from KEXT to DriverKit (DEXT), with our DEXT inheriting from IOUserSCSIParallelInterfaceController. We've encountered a data corruption issue that is reliably reproducible under specific conditions and are hoping for some assistance from the community. Hardware and Driver Configuration: Controller: LSI 3108 DEXT Configuration: We are reporting our hardware limitations to the framework via the UserReportHBAConstraints function, with the following key settings: // UserReportHBAConstraints... addConstraint(kIOMaximumSegmentAddressableBitCountKey, 0x20); // 32-bit addConstraint(kIOMaximumSegmentCountWriteKey, 129); addConstraint(kIOMaximumByteCountWriteKey, 0x80000); // 512KB Observed Behavior: Direct I/O vs. Buffered I/O We've observed that the I/O behavior differs drastically depending on whether it goes through the system file cache: 1. Direct I/O (Bypassing System Cache) -> 100% Successful When we use fio with the direct=1 flag, our read/write and data verification tests pass perfectly for all file sizes, including 20GB+. 2. Buffered I/O (Using System Cache) -> 100% Failure at >128MB Whether we use the standard cp command or fio with the direct=1 option removed to simulate buffered I/O, we observe the exact same, clear failure threshold: Test Results: File sizes ≤ 128MB: Success. Data checksums match perfectly. File sizes ≥ 256MB: Failure. Checksums do not match, and the destination file is corrupted. Evidence of failure reproduced with fio (buffered_integrity_test.fio, with direct=1 removed): fio --size=128M buffered_integrity_test.fio -> Test Succeeded (err=0). fio --size=256M buffered_integrity_test.fio -> Test Failed (err=92), reporting the following error, which proves a data mismatch during the verification phase: verify: bad header ... at file ... offset 1048576, length 1048576 fio: ... error=Illegal byte sequence Our Analysis and Hypothesis The phenomenon of "Direct I/O succeeding while Buffered I/O fails" suggests the problem may be related to the cache synchronization mechanism at the end of the I/O process: Our UserProcessParallelTask_Impl function correctly handles READ and WRITE commands. When cp or fio (buffered) runs, the WRITE commands are successfully written to the LSI 3108 controller's onboard DRAM cache, and success is reported up the stack. At the end of the operation, to ensure data is flushed to disk, the macOS file system issues an fsync, which is ultimately translated into a SYNCHRONIZE CACHE SCSI command (Opcode 0x35 or 0x91) and sent to our UserProcessParallelTask_Impl. We hypothesize that our code may not be correctly identifying or handling this SYNCHRONIZE CACHE opcode. It might be reporting "success" up the stack without actually commanding the hardware to flush its cache to the physical disk. The OS receives this "success" status and assumes the operation is safely complete. In reality, however, the last batch of data remains only in the controller's volatile DRAM cache and is eventually lost. This results in an incomplete or incorrect file tail, and while the file size may be correct, the data checksum will inevitably fail. Summary Our DEXT driver performs correctly when handling Direct I/O but consistently fails with data corruption when handling Buffered I/O for files larger than 128MB. We can reliably reproduce this issue using fio with the direct=1 option removed. The root cause is very likely the improper handling of the SYNCHRONIZE CACHE command within our UserProcessParallelTask. P.S. This issue did not exist in the original KEXT version of the driver. We would appreciate any advice or guidance on this issue. Thank you.

I have been working on a multi-platform multi-touch HID-standard digitizer clickpad device. The device uses Bluetooth Low Energy (BLE) as its connectivity transport and advertises HID over GATT. To date, I have the device working successfully on Windows 11 as a multi-touch, gesture-capable click pad with no custom driver or app on Windows. However, I have been having difficulty getting macOS to recognize and react to it as a HID-standard multi-touch click pad digitizer with either the standard Apple HID driver (AppleUserHIDEventDriver) or with a custom-coded driver extension (DEXT) modeled, based on the DTS stylus example and looking at the IOHIDFamily open source driver(s). The trackpad works with full-gesture support on Windows 11 and the descriptors seem to be compliant with the R23 Accessory Guidelines document, §15. With the standard, matching Apple AppleUserHIDEventDriver HID driver, when enumerating using stock-standard HID mouse descriptors, the device works fine on macOS 14.7 "Sonoma" as a relative pointer device with scroll wheel capability (two finger swipe generates a HID scroll report) and a single button. With the standard, matching Apple AppleUserHIDEventDriver HID driver, when enumerating using stock-standard HID digitizer click/touch pad descriptors (those same descriptors used successfully on Windows 11), the device does nothing. No button, no cursor, no gestures, nothing. Looking at ioreg -filtb, all of the key/value pairs for the driver match look correct. Because, even with the Apple open source IOHIDFamily drivers noted above, we could get little visibility into what might be going wrong, I wrote a custom DriverKit/HIDDriverKit driver extension (DEXT) (as noted above, based on the DTS HID stylus example and the open source IOHIDEventDriver. With that custom driver, I can get a single button click from the click pad to work by dispatching button events to dispatchRelativePointerEvent; however, when parsing, processing, and dispatching HID digitizer touch finger (that is, transducer) events via IOUserHIDEventService::dispatchDigitizerTouchEvent, nothing happens. If I log with: % sudo log stream --info --debug --predicate '(subsystem == "com.apple.iohid")' either using the standard AppleUserHIDEventDriver driver or our custom driver, we can see that our input events are tickling the IOHIDNXEventTranslatorSessionFilter HID event filter, so we know HID events are getting from the device into the macOS HID stack. This was further confirmed with the DTS Bluetooth PacketLogger app. Based on these events flowing in and hitting IOHIDNXEventTranslatorSessionFilter, using the standard AppleUserHIDEventDriver driver or our custom driver, clicks or click pad activity will either wake the display or system from sleep and activity will keep the display or system from going to sleep. In short, whether with the stock driver or our custom driver, HID input reports come in over Bluetooth and get processed successfully; however, nothing happens—no pointer movement or gesture recognition. STEPS TO REPRODUCE For the standard AppleUserHIDEventDriver: Pair the device with macOS 14.7 "Sonoma" using the Bluetooth menu. Confirm that it is paired / bonded / connected in the Bluetooth menu. Attempt to click or move one or more fingers on the touchpad surface. Nothing happens. For the our custom driver: Pair the device with macOS 14.7 "Sonoma" using the Bluetooth menu. Confirm that it is paired / bonded / connected in the Bluetooth menu. Attempt to click or move one or more fingers on the touchpad surface. Clicks are correctly registered. With transducer movement, regardless of the number of fingers, nothing happens.

Why hasn't the watchOS app updated immediately after the iPhone app was updated? It remains stuck in "Installing" status on the Apple Watch.

Hello everyone, We are migrating a KEXT storage driver to DriverKit. In our KEXT, we use a "one LUN = one Target" model and successfully create multiple targets in a loop during initialization. We are now trying to replicate this architecture in our DEXT. The issue is that only Target 0 is fully probed and mounted. For Target 1, the lifecycle silently stops after the first TEST UNIT READY command is successfully acknowledged. The macOS SCSI layer never sends any subsequent probe commands (like INQUIRY) to this target. The failure sequence for Target 1, observed from our logs (regardless of whether Target 0 is created), is as follows: AsyncCreateTargetForID(1) -> UserInitializeTargetForID(1) (Succeeds) UserProcessParallelTask(Target: 1, Opcode: TUR) (Succeeds) The DEXT correctly acknowledges the TUR command for Target 1 by returning kSCSITaskStatus_CHECK_CONDITION with UNIT ATTENTION in the Sense Data (Succeeds) <-- Breakpoint --> UserProcessParallelTask(Target: 1, Opcode: INQUIRY) (Never happens) Through log comparison, we have confirmed that the DEXT's response to the TUR command for Target 1 is identical to the successful KEXT's response. We have tried creating only Target 1 (skipping Target 0 entirely), but the behavior is exactly the same -> the probe still stalls after the TUR. We initially suspected a race condition caused by consecutive calls to AsyncCreateTargetForID(). We attempted several methods to ensure that targets are created sequentially, such as trying to build a "creation chain" using OSAction completion handlers. However, these attempts were unsuccessful due to various compilation errors and API misunderstandings. In any case, this "race condition" theory was ultimately disproven by our experiment where creating only Target 1 still resulted in failure. We would like to ask two questions: Is our inability to have a Target ID greater than 0 fully probed by macOS a bug in our own code, or could there be another reason we are unaware of? If we do indeed need a "one-after-another" creation mechanism for AsyncCreateTargetForID, what is the correct way to implement a "chained creation" using OSAction completion handlers in DriverKit? Thank you for any help or guidance. Best Regards, Charles

I created a custom class that inherits from IOUserSCSIPeripheralDeviceType00 in the DriverKit SCSIPeripheralsDriverKit framework. When I attempted to send a vendor-specific command to a USB storage device using the UserSendCDB function of this class instance, the function returned the error: kIOReturnNotPrivileged (iokit_common_err(0x2c1)) // privilege violation However, when using UserSendCDB in the same way to issue standard SCSI commands such as INQUIRY or Test Unit Ready, no error occurred and the returned sense data was valid. Why is UserSendCDB able to send standard SCSI commands successfully, but vendor-specific commands return kIOReturnNotPrivileged? Is there any required entitlement, DriverKit capability, or implementation detail needed to allow vendor-specific CDBs? Below are the entitlements of my DriverKit extension: <dict> <key>com.apple.developer.driverkit.transport.usb</key> <array> <dict> <key>idVendor</key> <integer>[number of vendorid]</integer> </dict> </array> <key>com.apple.developer.driverkit</key> <true/> <key>com.apple.developer.driverkit.allow-any-userclient-access</key> <true/> <key>com.apple.developer.driverkit.allow-third-party-userclients</key> <true/> <key>com.apple.developer.driverkit.communicates-with-drivers</key> <true/> <key>com.apple.developer.driverkit.family.scsicontroller</key> <true/> </dict> If there is any additional configuration or requirement to enable vendor-specific SCSI commands, I would appreciate your guidance. Environment: macOS15.6 M2 MacBook Pro

I am developing a macOS virtual audio device using an Audio Server Plug-In (HAL). I want the virtual device to be visible to all applications only when my main app is running, and completely hidden from all apps when the app is closed. The goal is to dynamically control device visibility based on app state without reinstalling the driver.What is the recommended way for the app to notify the HAL plug-in about its running or closed state ? Any guidance on best-practice architecture for this scenario would be appreciated.

在Developer app中现在注册按钮时置灰等,无法点击,我发送的联系邮件也没有得到回应,有什么办法解决吗

Hi! Following this ticket: https://developer.apple.com/forums/thread/808764?page=1#868010022 Is there any way to use the hardware RFID reading capabilities of an iPhone to read ISO15693 RF tags silently, and without a UI pop-up? Perhaps using other native iOS libraries than the NFC library? If not, is there a way for a business to request this feature be allowed in internally used apps only?

Hello! We develop a SAS driver and a service application for DAS devices. When users in our application create a RAID array on the device: On the 1st step, our dext driver mounts a new volume. At this step DiskUtil automatically tries to mount it. As there is no file system on the new volume - the MacOS system popup appears "The disk you attached was not readable by the computer" On the 2nd step our application creates the file system on this new volume. So we do not need this MacOS system popup to appear (as it may frustrate our users). We found a way to disable the global auto mount but this solution also impacts on other devices (which is not good). Are there any other possibilities to prevent the popup "The disk you attached was not readable by the computer" from appearing?

1. 环境描述 (Environment) OS: macOS 26.2 Hardware: Apple Silicon (M1/M2/M3) DriverKit SDK: DriverKit 19.0 / 20.0 Arch: Universal (x86_64, arm64, arm64e) SIP Status: Enabled (Works perfectly when Disabled) 2. 问题现象 (Problem Description) 在开启 SIP 的环境下，USB 驱动扩展（Dext）能安装，但插入设备时无法连接设备（驱动的Start方法未被调用）。 驱动状态： MacBook-Pro ~ % systemextensionsctl list 1 extension(s) --- com.apple.system_extension.driver_extension (Go to 'System Settings > General > Login Items & Extensions > Driver Extensions' to modify these system extension(s)) enabled active teamID bundleID (version) name [state] * * JK9U78YRLU com.ronganchina.usbapp.MyUserUSBInterfaceDriver (1.3/4) com.ronganchina.usbapp.MyUserUSBInterfaceDriver [activated enabled] 关键日志证据 (Key Logs) KernelManagerd: Error Domain=NSPOSIXErrorDomain Code=8 "Exec format error" Syspolicyd: failed to fetch ... /_CodeSignature/CodeRequirements-1 error=-10 AppleSystemPolicy: ASP: Security policy would not allow process DriverKit Kernel: DK: MyUserUSBInterfaceDriver user server timeout dext的 embedded.provisionprofile 已包含： com.apple.developer.driverkit com.apple.developer.driverkit.transport.usb (idVendor: 11977)

I am trying to add a few properties to an IOUSBHostDevice but the SetProperties is returning kIOReturnUnsupported. The reason I am trying to modify the IOUSBHostDevice's properties is so we can support a MacBook Air SuperDrive when it is attached to our docking station devices. The MacBook Air SuperDrive needs a high powered port to run and this driver will help the OS realize that our dock can support it. I see that the documentation for SetProperties says: The default implementation of this method returns kIOReturnUnsupported. You can override this method and use it to modify the set of properties and values as needed. The changes you make apply only to the current service. Do I need to override IOUSBHostDevice? This is my current Start implementation (you can also see if in the Xcode project): kern_return_t IMPL(MyUserUSBHostDriver, Start) { kern_return_t ret = kIOReturnSuccess; OSDictionary * prop = NULL; OSDictionary * mergeProperties = NULL; bool success = true; os_log(OS_LOG_DEFAULT, "&gt; %s", __FUNCTION__); os_log(OS_LOG_DEFAULT, "%s:%d", __FUNCTION__, __LINE__); ret = Start(provider, SUPERDISPATCH); __Require(kIOReturnSuccess == ret, Exit); os_log(OS_LOG_DEFAULT, "%s:%d", __FUNCTION__, __LINE__); ivars-&gt;host = OSDynamicCast(IOUSBHostDevice, provider); __Require_Action(NULL != ivars-&gt;host, Exit, ret = kIOReturnNoDevice); os_log(OS_LOG_DEFAULT, "%s:%d", __FUNCTION__, __LINE__); ret = ivars-&gt;host-&gt;Open(this, 0, 0); __Require(kIOReturnSuccess == ret, Exit); os_log(OS_LOG_DEFAULT, "%s:%d", __FUNCTION__, __LINE__); ret = CopyProperties(&amp;prop); __Require(kIOReturnSuccess == ret, Exit); __Require_Action(NULL != prop, Exit, ret = kIOReturnError); os_log(OS_LOG_DEFAULT, "%s:%d", __FUNCTION__, __LINE__); mergeProperties = OSDynamicCast(OSDictionary, prop-&gt;getObject("IOProviderMergeProperties")); mergeProperties-&gt;retain(); __Require_Action(NULL != mergeProperties, Exit, ret = kIOReturnError); os_log(OS_LOG_DEFAULT, "%s:%d", __FUNCTION__, __LINE__); OSSafeReleaseNULL(prop); ret = ivars-&gt;host-&gt;CopyProperties(&amp;prop); __Require(kIOReturnSuccess == ret, Exit); __Require_Action(NULL != prop, Exit, ret = kIOReturnError); os_log(OS_LOG_DEFAULT, "%s:%d", __FUNCTION__, __LINE__); os_log(OS_LOG_DEFAULT, "%s : %s", "USB Product Name", ((OSString *) prop-&gt;getObject("USB Product Name"))-&gt;getCStringNoCopy()); os_log(OS_LOG_DEFAULT, "%s : %s", "USB Vendor Name", ((OSString *) prop-&gt;getObject("USB Vendor Name"))-&gt;getCStringNoCopy()); os_log(OS_LOG_DEFAULT, "%s:%d", __FUNCTION__, __LINE__); success = prop-&gt;merge(mergeProperties); __Require_Action(success, Exit, ret = kIOReturnError); os_log(OS_LOG_DEFAULT, "%s:%d", __FUNCTION__, __LINE__); ret = ivars-&gt;host-&gt;SetProperties(prop); // this is no working __Require(kIOReturnSuccess == ret, Exit); Exit: OSSafeReleaseNULL(mergeProperties); OSSafeReleaseNULL(prop); os_log(OS_LOG_DEFAULT, "err ref %d", kIOReturnUnsupported); os_log(OS_LOG_DEFAULT, "&lt; %s %d", __FUNCTION__, ret); return ret; }

I'm developing a DriverKit USB driver for iPadOS that needs to communicate with a vendor-class USB device (bInterfaceClass = 0xFF) as I need to communicate with a USB device using a custom protocol over IOUSBHostPipe for bulk transfers. Current Configuration: Info.plist: IOProviderClass = IOUSBHostDevice Device: bDeviceClass = 0, bInterfaceClass = 0xFF (vendor-specific) What Works: Driver matches and loads successfully Start_Impl() executes device->Open() succeeds device->SetConfiguration() succeeds The Problem: uintptr_t iterRef = 0; kern_return_t ret = device->CreateInterfaceIterator(&iterRef); Result: ret = kIOReturnSuccess (0x0), but iterRef = 0 (empty iterator) What I've Tried: Matching IOUSBHostInterface directly - Driver is loaded, but extension never executed Current approach (IOUSBHostDevice) - Driver extension loads and starts, but CreateInterfaceIterator returns empty Question: Does iPadOS allow third-party DriverKit extensions to access vendor-class (0xFF) USB devices? That is, iPadOS, is there a way for a third-party DriverKit extension to access IOUSBHostInterface objects for vendor-class (0xFF) USB devices?