Dear Support Team, ​I am writing to seek technical assistance regarding a persistent issue with Dolby Vision exporting in DaVinci Resolve 20 on my iPad Pro 12.9-inch (2021, M1 chip) running iPadOS 26.0.1. ​The Issue: Despite correctly configuring the project for a Dolby Vision workflow and successfully completing the dynamic metadata analysis, the "Dolby Vision Profile" dropdown menu (and related embedding options) is completely missing from the Advanced Settings in the Deliver page. ​My Current Configuration & Steps Taken: ​Software Version: DaVinci Resolve Studio 20 (Studio features like Dolby Vision analysis are active and functional). ​Project Settings: Color Science: DaVinci YRGB Color Managed. ​Dolby Vision: Enabled (Version 4.0) with Mastering Display set to 1000 nits. ​Output Color Space: Rec.2100 ST2084. ​Color Page: Dynamic metadata analysis has been performed, and "Trim" controls are functional. ​Export Settings: ​Format: QuickTime / MP4. ​Codec: H.265 (HEVC). ​Encoding Profile: Main 10. ​The Problem: Under "Advanced Settings," there is no option to select a Dolby Vision Profile (e.g., Profile 8.4) or to "Embed Dolby Vision Metadata." ​Potential Variables: ​System Version: I am currently running iPadOS 26. ​Apple ID: My iPad is currently not logged into an Apple ID. I suspect this might be preventing the app from accessing certain system-level AVFoundation frameworks or Dolby DRM/licensing certificates required for metadata embedding. ​Could you please clarify if the "Dolby Vision Profile" option is dependent on a signed-in Apple ID for hardware-level encoding authorization, or if this is a known compatibility issue with the current iPadOS 26 build? ​I look forward to your guidance on how to resolve this. ​Best regards, INSOFT_Fred

When printing image/photo files via AirPrint, selected finishing options (e.g., Punch) are not applied unless a preset is chosen. reproduction steps: Select an image on iOS Tap Print → choose printer/server Set Finishing Options → Punch Print Observed: Finishing options not applied IPP trace shows no finisher attributes in the request working scenario: Select any Preset (e.g., Color) before printing Finishing options are then included in IPP and applied Note: Issue does not occur when printing PDFs from iOS; finisher attributes are sent correctly. Is this expected AirPrint behavior for image jobs, or could this be a bug in how iOS constructs the IPP request for photos?

Since macOS 26.4 Beta 1, virtual HID devices created via DriverKit can no longer intercept key events from the built-in MacBook keyboard. External keyboards still work. This is confirmed and tracked here: https://github.com/pqrs-org/Karabiner-Elements/issues/4402 One possible lead (from LLM-assisted analysis of Apple's open-source IOHIDFamily code and cross-referencing community reports): macOS 26.4 Beta may have introduced or modified a security policy referred to as com.apple.iohid.protectedDeviceAccess, which could block IOHIDDeviceOpen for the Apple Internal Keyboard connected via SPI transport (AppleHIDTransportHIDDevice). This appears related to a "GamePolicy" check in IOHIDDeviceClass.m that gates whether processes can open HID devices. This has not been independently verified and may or may not be the root cause. This has far-reaching consequences. Karabiner-Elements alone has over 21,000 GitHub stars and is used by hundreds of thousands of macOS users for keyboard customization, accessibility workflows, ergonomic setups, and multilingual input. This change completely breaks its core functionality on any MacBook. Beyond Karabiner, this affects every developer building keyboard remapping, input customization, or accessibility tooling via DriverKit virtual HID devices — including commercial applications currently in development. I'd argue that the power and flexibility of keyboard customization on macOS is a genuine competitive advantage for the platform. Developers and power users choose Macs partly because tools like this exist. Restricting this capability would be detrimental to the ecosystem and to Apple's appeal among professional users. I'd like to understand: is this an intentional security change or a regression? If intentional, is there a migration path?

I am writing a DriverKit driver for the first that uses the USBSerialDriverKit. The driver its purpose is to expose the device as serial interface (/dev/cu.tetra-pei0 or something like this). My problem: I don't see any logs from that driver in the console and I tried like 40 different approaches and checked everything. The last message I see is that the driver get successfully added to the system it is in the list of active and enabled system driver extensions but when I plug the device in none of my logs appear and it doesn't show up in ioreg. So without my driver the target device looks like this: +-o TETRA PEI interface@02120000 <class IOUSBHostDevice, id 0x10000297d, registered, matched, active, busy 0 (13 ms), retain 30> | { | "sessionID" = 268696051410 | "USBSpeed" = 3 | "UsbLinkSpeed" = 480000000 | "idProduct" = 36886 | "iManufacturer" = 1 | "bDeviceClass" = 0 | "IOPowerManagement" = {"PowerOverrideOn"=Yes,"DevicePowerState"=2,"CurrentPowerState"=2,"CapabilityFlags"=32768,"MaxPowerState"=2,"DriverPowerState"=0} | "bcdDevice" = 9238 | "bMaxPacketSize0" = 64 | "iProduct" = 2 | "iSerialNumber" = 0 | "bNumConfigurations" = 1 | "UsbDeviceSignature" = <ad0c16901624000000ff0000> | "USB Product Name" = "TETRA PEI interface" | "locationID" = 34734080 | "bDeviceSubClass" = 0 | "bcdUSB" = 512 | "USB Address" = 6 | "kUSBCurrentConfiguration" = 1 | "IOCFPlugInTypes" = {"9dc7b780-9ec0-11d4-a54f-000a27052861"="IOUSBHostFamily.kext/Contents/PlugIns/IOUSBLib.bundle"} | "UsbPowerSinkAllocation" = 500 | "bDeviceProtocol" = 0 | "USBPortType" = 0 | "IOServiceDEXTEntitlements" = (("com.apple.developer.driverkit.transport.usb")) | "USB Vendor Name" = "Motorola Solutions, Inc." | "Device Speed" = 2 | "idVendor" = 3245 | "kUSBProductString" = "TETRA PEI interface" | "kUSBAddress" = 6 | "kUSBVendorString" = "Motorola Solutions, Inc." | } | +-o AppleUSBHostCompositeDevice <class AppleUSBHostCompositeDevice, id 0x100002982, !registered, !matched, active, busy 0, retain 5> | { | "IOProbeScore" = 50000 | "CFBundleIdentifier" = "com.apple.driver.usb.AppleUSBHostCompositeDevice" | "IOProviderClass" = "IOUSBHostDevice" | "IOClass" = "AppleUSBHostCompositeDevice" | "IOPersonalityPublisher" = "com.apple.driver.usb.AppleUSBHostCompositeDevice" | "bDeviceSubClass" = 0 | "CFBundleIdentifierKernel" = "com.apple.driver.usb.AppleUSBHostCompositeDevice" | "IOMatchedAtBoot" = Yes | "IOMatchCategory" = "IODefaultMatchCategory" | "IOPrimaryDriverTerminateOptions" = Yes | "bDeviceClass" = 0 | } | +-o lghub_agent <class AppleUSBHostDeviceUserClient, id 0x100002983, !registered, !matched, active, busy 0, retain 7> | { | "IOUserClientCreator" = "pid 1438, lghub_agent" | "IOUserClientDefaultLocking" = Yes | } | +-o IOUSBHostInterface@0 <class IOUSBHostInterface, id 0x100002986, registered, matched, active, busy 0 (5 ms), retain 9> | | { | | "USBPortType" = 0 | | "IOCFPlugInTypes" = {"2d9786c6-9ef3-11d4-ad51-000a27052861"="IOUSBHostFamily.kext/Contents/PlugIns/IOUSBLib.bundle"} | | "USB Vendor Name" = "Motorola Solutions, Inc." | | "bcdDevice" = 9238 | | "USBSpeed" = 3 | | "idProduct" = 36886 | | "IOServiceDEXTEntitlements" = (("com.apple.developer.driverkit.transport.usb")) | | "bInterfaceSubClass" = 0 | | "bConfigurationValue" = 1 | | "locationID" = 34734080 | | "USB Product Name" = "TETRA PEI interface" | | "bInterfaceProtocol" = 0 | | "iInterface" = 0 | | "bAlternateSetting" = 0 | | "idVendor" = 3245 | | "bInterfaceNumber" = 0 | | "bInterfaceClass" = 255 | | "bNumEndpoints" = 2 | | } | | | +-o lghub_agent <class AppleUSBHostInterfaceUserClient, id 0x100002988, !registered, !matched, active, busy 0, retain 6> | { | "UsbUserClientBufferStatistics" = {"IOMemoryDescriptor"=0,"IOBufferMemoryDescriptor"=0,"IOSubMemoryDescriptor"=0} | "IOUserClientCreator" = "pid 1438, lghub_agent" | "UsbUserClientBufferAllocations" = {"Bytes"=0,"Descriptors"=0} | "IOUserClientDefaultLocking" = Yes | } | +-o IOUSBHostInterface@1 <class IOUSBHostInterface, id 0x100002987, registered, matched, active, busy 0 (5 ms), retain 9> | { | "USBPortType" = 0 | "IOCFPlugInTypes" = {"2d9786c6-9ef3-11d4-ad51-000a27052861"="IOUSBHostFamily.kext/Contents/PlugIns/IOUSBLib.bundle"} | "USB Vendor Name" = "Motorola Solutions, Inc." | "bcdDevice" = 9238 | "USBSpeed" = 3 | "idProduct" = 36886 | "IOServiceDEXTEntitlements" = (("com.apple.developer.driverkit.transport.usb")) | "bInterfaceSubClass" = 0 | "bConfigurationValue" = 1 | "locationID" = 34734080 | "USB Product Name" = "TETRA PEI interface" | "bInterfaceProtocol" = 0 | "iInterface" = 0 | "bAlternateSetting" = 0 | "idVendor" = 3245 | "bInterfaceNumber" = 1 | "bInterfaceClass" = 255 | "bNumEndpoints" = 2 | } | +-o lghub_agent <class AppleUSBHostInterfaceUserClient, id 0x10000298a, !registered, !matched, active, busy 0, retain 6> { "UsbUserClientBufferStatistics" = {"IOMemoryDescriptor"=0,"IOBufferMemoryDescriptor"=0,"IOSubMemoryDescriptor"=0} "IOUserClientCreator" = "pid 1438, lghub_agent" "UsbUserClientBufferAllocations" = {"Bytes"=0,"Descriptors"=0} "IOUserClientDefaultLocking" = Yes } more details in my comment.

I have a driver extending IOUserUSBSerial and I want the device to show up as /dev/tty.mycustombasename-123 and /dev/cu. respectively. How can I achieve that?

Hi Everyone, We are currently migrating a mature legacy KEXT to DriverKit for our PCIe SCSI storage controller (connected via Thunderbolt 3). During the DEXT load sequence, we have observed that the system automatically triggers a power state transition from State 0 (Off) to State 2 (On). However, this process results in a Kernel Panic due to a timeout after approximately 21 seconds. We have verified that our implementation of Start_Impl, UserInitializeController_Impl, and SetPowerState_Impl executes extremely fast, with a total execution time of less than one second. Specifically, SetPowerState_Impl returns kIOReturnSuccess immediately upon being called. Furthermore, our current Info.plist does not contain any IOPowerManagement dictionary or related keys. Despite the fast execution and the absence of explicit power management declarations in the plist, the kernel power management state machine (IOServicePM) still generates a 21-second timeout, leading to the following panic: Panic Log: panic(cpu 7 caller 0xfffffe0020be8fec): MySCSIDriver::setPowerState(0xfffffe2fb1a65c00 : 0xfffffe0020bfed88, 0 -> 2) timed out after 21257 ms @IOServicePM.cpp:5609 com.example.driver.dext: ( id: com.example.driver.dext; path: /Library/SystemExtensions/[UUID]/com.example.driver.dext; state: loaded ) Note on Previous Discussion: I would like to express my gratitude to Kevin from Apple DTS for the helpful discussion regarding the implementation of BundleParallelTask on the forums. Since then, we have shifted our development focus toward completing the overall management ecosystem, delivering a comprehensive operational interface for users, and handling specific user environments and behaviors. Our current priority is ensuring system stability—specifically resolving these Thunderbolt-related power management issues (sleep/wake)—to prepare the product for upcoming testing. I remain very grateful for the guidance provided on batch task optimization and intend to resume those optimizations once this critical stability baseline is secured. Technical Guidance Needed for PM Migration In our legacy KEXT, we utilized PMinit(), registerPowerDriver(), and joinPMtree() to precisely control the timing of power management registration. In transitioning to the DriverKit SDK, we have not found clear guidance on several key points: Standardized Migration Path: What is the recommended way to implement equivalent power management initialization (formerly PMinit) within a DriverKit subclass? In DriverKit, how should we replicate the behavior of manually calling registerPowerDriver and joinPMtree to ensure the driver is only monitored once the hardware is ready? Implicit Power Registration: Why does the system enforce a setPowerState(0 -> 2) transition on a subclass of IOUserSCSIParallelInterfaceController even when no IOPowerManagement dictionary is defined in the Info.plist? Is this a default behavior of the SCSI or PCI transport framework? Thunderbolt Specifics: Are there specific power proxying requirements or configurations for PCIe devices over Thunderbolt to avoid conflicts with the default IOPCIFamily power policies? Best Regards, Charles

While I welcome the arrival of a userspace implementation of drivers, DriverKit as it stands has some notable flaws. My main concern is the ability of open-source projects like HoRNDIS being able to access paid developer accounts and the limited entitlement scope (plus the waiting period) for what is essentially a hobbyist free project. Even if the developer is a professional company, some legacy hardware will go unsupported because of a lack of support from the vendor. Providing a way for users who need access to older hardware would be needed. Three concrete requests: A class-level or wildcard VID/PID entitlement for open source projects with a verifiable public repository A free or reduced-cost entitlement path for non-commercial volunteer-maintained drivers Published approval criteria and timelines so projects can plan accordingly Depreciating kexts without providing an accessible successor for community projects isn't security, it is gatekeeping access to hardware that is critically needed. Is this use case on the roadmap at all? Developers deserve a clear answer.

Hi everyone, I observed a behavior with AirPrint from an iPhone and wanted to confirm if this is expected behavior from iOS. Scenario tested: File type: Photo Print-quality selected by the user: Normal Observation (from packet capture): When checking the PCAP for the request sent from the iPhone, the print-quality attribute is always sent as high, even though the user selected Normal in the UI. Question: Is this an expected behavior in iOS/AirPrint where photos are always sent with print-quality=high regardless of the user-selected print quality? Or could this be a bug?

I have a custom hardware board that I want to communicate serially with from an iPad. Should I use the DriverKit route or the MFi route?

I have two Macbook Pros: 14" M4 Pro (company) 16" M4 Max (personal) I work remote full-time and recently purchased 2 of the new Studio Display XDRs. Everything works perfectly however I chose to connect them to the M4 Max. I have a caldigit Element TB5 hub and can daisy chain both monitors through that perfectly. With that said, no matter how I plug them into the M4 Pro I can only ever get one to light up at a time. What I have tried to resolve it: Plug them in individually to the m4 pro Plug them in one at a time, force them to 60hz and then plug them both in. Daisy Chaining the displays Daisy Chaining the displays through the TB5 Hub Nothing works. Only one display comes on and its whichever is plugged in first. I have even tried lowering the refresh to as low as it goes on both manually then plugging them back in. Still nothing. From what I am reading it appears to be that the M4 Pro has 3 display lanes and when I plug the first studio display XDR it is using 2 lanes. If I go down to 60hz which is what the original studio display was, then it should theoretically go down to 1 display lane allowing a second to be plugged in. A bunch of people had the older studio display running 2x 5k ASD monitors on the M4 Pro. Now with the latest Studio Display XDR I am stuck. I was researching possibly editing the EDID of each to mimic the older studio display, but I don't know how to do that easily without BetterDisplay and right now I have no ability to install that. There is a chance I can get approval to run commands / BetterDisplay to get this working if a solution can be found. What I think the ultimate fix is for the firmware / macOS to realize the limitation, force the studio display XDR to 60hz when a second monitor is plugged in and they both would work. A single Studio Display XDR could run 120hz, but immediately upon plugging a second one it swaps to 60hz. I am completely fine with that scenario. I have found a few discussions about this topic with the main one being on apple discussions: https://discussions.apple.com/thread/256262701?sortBy=rank&answerId=261888577022 Someone sort of gave me this idea on Mac because they were trying to use the studio display XDR on windows and it appears to have worked with cloning an older ASD EDID on the new model: https://www.reddit.com/r/mac/comments/1s3ani5/got_studio_display_xdr_working_on_windows_pc_5k/ I don't really know what else to do. I opened a ticket with support. Case # 102853480566, but it went no where. I got disconnected during the first call after describing everything and when they reached back out they didn't even give me 2 seconds to pick up and they hung up and closed the ticket. I really don't want to return the displays because they are beautiful and work beautifully on the m4 max. They should work with 60hz on the m4 pro. Who / How / When can we get this resolved? I would be happy to work with an Apple dev / engineer to help resolve this.

How does VMWare access USB devices without have any specifics of the USB device? Does it use the same profile/entitlement process or does it take a different approach?

Investigating a kernel panic, I discovered that Apple Silicon Panic traces are not working with how I know to symbolicate the panic information. I have not found proper documentation that corrects this situation. Attached file is an indentity-removed panic, received from causing an intentional panic (dereferencing nullptr), so that I know what functions to expect in the call stack. This is cut-and-pasted from the "Report To Apple" dialog that appears after the reboot: panic_1_4_21_b.txt To start, I download and install the matching KDK (in this case KDK_14.6.1_23G93.kdk), identified from this line: OS version: 23G93 Kernel version: Darwin Kernel Version 23.6.0: Mon Jul 29 21:14:04 PDT 2024; root:xnu-10063.141.2~1/RELEASE_ARM64_T8122 Then start lldb from Terminal, using this command: bash_prompt % lldb -arch arm64e /Library/Developer/KDKs/KDK_14.6.1_23G93.kdk/System/Library/Kernels/kernel.release.t8122 Next I load the remaining scripts per the instructions from lldb: (lldb) settings set target.load-script-from-symbol-file true I need to know what address to load my kext symbols to, which I read from this line of the panic log, after the @ symbol: com.company.product(1.4.21d119)[92BABD94-80A4-3F6D-857A-3240E4DA8009]@0xfffffe001203bfd0->0xfffffe00120533ab I am using a debug build of my kext, so the DWARF symbols are part of the binary. I use this line to load the symbols into the lldb session: (lldb) addkext -F /Library/Extensions/KextName.kext/Contents/MacOS/KextName 0xfffffe001203bfd0 And now I should be able to use lldb image lookup to identify pointers on the stack that land within my kext. For example, the current PC at the moment of the crash lands within the kext (expected, because it was intentional): (lldb) image lookup -a 0xfffffe001203fe10 Which gives the following incorrect result: Address: KextName[0x0000000000003e40] (KextName.__TEXT.__cstring + 14456) Summary: "ffer has %d retains\n" That's not even a program instruction - that's within a cstring. No, that cstring isn't involved in anything pertaining to the intentional panic I am expecting to see. Can someone please explain what I'm doing wrong and provide instructions that will give symbol information from a panic trace on an Apple Silicon Mac? Disclaimers: Yes I know IOPCIFamily is deprecated, I am in process of transitioning to DriverKit Dext from IOKit kext. Until then I must maintain the kext. Terminal command "atos" provides similar incorrect results, and seems to not work with debug-built-binaries (only dSYM files) Yes this is an intentional panic so that I can verify the symbolicate process before I move on to investigating an unexpected panic I have set nvram boot-args to include keepsyms=1 I have tried (lldb) command script import lldb.macosx but get a result of error: no images in crash log (after the nvram settings)

We are looking for a solution (API, Frameworks) that would allow us to block any type of external device, including storage devices, HIDs, network adapters, and Bluetooth devices according with dynamic rules that comes from management server . This feature is important for endpoint security solutions vendors, and it can be implemented on other platforms and older versions of macOS using the IOKit framework and kexts. I have found one solution that can control the usage only of "storage" devices with the EndpointSecurity framework in conjunction with the DiskArbitration framework. This involves monitoring the MOUNT and OPEN events for /dev/disk files, checking for devices as they appear, and ejecting them if they need to be blocked.. Also, I have found the ES_EVENT_TYPE_AUTH_IOKIT_OPEN event in EndpointSecurity.framework, but it doesn't seem to be useful, at least not for my purposes, because ES doesn't provide AUTH events for some system daemons, such as configd (it only provides NOTIFY events). Furthermore, there are other ways to communicate with devices and their drivers apart from IOKit. DriverKit.framework does not provide the necessary functionality either, as it requires specific entitlements that are only available to certain vendors and devices. Therefore, it cannot be used to create universal drivers for all devices, which should be blocked. Any advice would be greatly appreciated!

I am trying to add a few properties to an IOUSBHostDevice but the SetProperties is returning kIOReturnUnsupported. The reason I am trying to modify the IOUSBHostDevice's properties is so we can support a MacBook Air SuperDrive when it is attached to our docking station devices. The MacBook Air SuperDrive needs a high powered port to run and this driver will help the OS realize that our dock can support it. I see that the documentation for SetProperties says: The default implementation of this method returns kIOReturnUnsupported. You can override this method and use it to modify the set of properties and values as needed. The changes you make apply only to the current service. Do I need to override IOUSBHostDevice? This is my current Start implementation (you can also see if in the Xcode project): kern_return_t IMPL(MyUserUSBHostDriver, Start) { kern_return_t ret = kIOReturnSuccess; OSDictionary * prop = NULL; OSDictionary * mergeProperties = NULL; bool success = true; os_log(OS_LOG_DEFAULT, "&gt; %s", __FUNCTION__); os_log(OS_LOG_DEFAULT, "%s:%d", __FUNCTION__, __LINE__); ret = Start(provider, SUPERDISPATCH); __Require(kIOReturnSuccess == ret, Exit); os_log(OS_LOG_DEFAULT, "%s:%d", __FUNCTION__, __LINE__); ivars-&gt;host = OSDynamicCast(IOUSBHostDevice, provider); __Require_Action(NULL != ivars-&gt;host, Exit, ret = kIOReturnNoDevice); os_log(OS_LOG_DEFAULT, "%s:%d", __FUNCTION__, __LINE__); ret = ivars-&gt;host-&gt;Open(this, 0, 0); __Require(kIOReturnSuccess == ret, Exit); os_log(OS_LOG_DEFAULT, "%s:%d", __FUNCTION__, __LINE__); ret = CopyProperties(&amp;prop); __Require(kIOReturnSuccess == ret, Exit); __Require_Action(NULL != prop, Exit, ret = kIOReturnError); os_log(OS_LOG_DEFAULT, "%s:%d", __FUNCTION__, __LINE__); mergeProperties = OSDynamicCast(OSDictionary, prop-&gt;getObject("IOProviderMergeProperties")); mergeProperties-&gt;retain(); __Require_Action(NULL != mergeProperties, Exit, ret = kIOReturnError); os_log(OS_LOG_DEFAULT, "%s:%d", __FUNCTION__, __LINE__); OSSafeReleaseNULL(prop); ret = ivars-&gt;host-&gt;CopyProperties(&amp;prop); __Require(kIOReturnSuccess == ret, Exit); __Require_Action(NULL != prop, Exit, ret = kIOReturnError); os_log(OS_LOG_DEFAULT, "%s:%d", __FUNCTION__, __LINE__); os_log(OS_LOG_DEFAULT, "%s : %s", "USB Product Name", ((OSString *) prop-&gt;getObject("USB Product Name"))-&gt;getCStringNoCopy()); os_log(OS_LOG_DEFAULT, "%s : %s", "USB Vendor Name", ((OSString *) prop-&gt;getObject("USB Vendor Name"))-&gt;getCStringNoCopy()); os_log(OS_LOG_DEFAULT, "%s:%d", __FUNCTION__, __LINE__); success = prop-&gt;merge(mergeProperties); __Require_Action(success, Exit, ret = kIOReturnError); os_log(OS_LOG_DEFAULT, "%s:%d", __FUNCTION__, __LINE__); ret = ivars-&gt;host-&gt;SetProperties(prop); // this is no working __Require(kIOReturnSuccess == ret, Exit); Exit: OSSafeReleaseNULL(mergeProperties); OSSafeReleaseNULL(prop); os_log(OS_LOG_DEFAULT, "err ref %d", kIOReturnUnsupported); os_log(OS_LOG_DEFAULT, "&lt; %s %d", __FUNCTION__, ret); return ret; }

Trying to use IOLog to print out a message from a dext. When I try to use IOLog, I get , though I did not or thought I did not tag it as private. I have tried to update the info.plist file for the dext according to https://developer.apple.com/forums/thread/705810, but that has not helped, or perhaps I am not defining it correctly since it's a dext. Anyone else had this issue, and how did you fix it?

Hello every one good day :) My project uses a mouse driver handling all events from the mouse produced by our company. In the past the driver is a kext, which implement acceleration by HIDPointerAccelerationTable, we prepare data in the driver's info.plist, while our app specifies a value to IOHIDSystem with key kIOHIDPointerAccelerationKey, the driver will call copyAccelerationTable() to lookup the HIDPointerAccelerationTable and return a value. In current DriverKit area, the process above is deprecated. Now I don't know to do. I've read some document: https://developer.apple.com/documentation/hiddriverkit/iohidpointereventoptions/kiohidpointereventoptionsnoacceleration?changes=__7_8 https://developer.apple.com/documentation/hiddriverkit/kiohidmouseaccelerationtypekey?changes=__7_8 https://developer.apple.com/documentation/hiddriverkit/kiohidpointeraccelerationkey?changes=__7_8 but no any description in those articles. Please help!

Hi Everyone! I want to block the USB wired mouse from accessing my machine. Which framework is used to implement ? PS: I have already tried DriverKit Framework but it requires Apple's paid developer account. What will be alternative ?

Hello, I recently created an app with the Calldirectory Extension. It worked all good as long as I was on my development iphone. I tried to install the app on my privat iphone (same phone/same os version), but then I faced an issue. I couldn't enable the Calldirectory Extension with an error (Error Enabling Extension Failed to request data for APPNAME. You may try enabling the extension again, and if the problem persists, conatact the application developer.)

Hi, our virtual CoreAudio server plugin creates and removes dynamically CoreAudio devices. Each time it does so it leaves traces in /Library/Preferences/Audio com.apple.audio.DeviceSettings.plist com.apple.audio.SystemSettings.plist The files on the test machine now have become >1Mb and the system keeps recreating them. How can I manually remove/cleanup these files? (This is for development only. It already became pretty tedious to evaluate current device settings for debugging purposes.) How can the CoreAudio server plugin make sure once a device has been removed also its entries are removed from the .plist (It already removes it's storage, but the system still keeps other settings.) Is there some documentation about what gets stored and how the settings are organized in these preferences? (This is also for development and debugging only. We are not intending to access these settings directly ) Thanks!

Hello everyone. I have been developing PCIe device driver through Thunderbolt. However, it was confirmed that up to three devices connected to the daisy chain worked normally, but the fourth device failed to operate the _CopyDeviceMemoryWithIndex() function for connection with the BAR0 App and did not work properly. The standard specification of Thunderbolt 3/4 is said to be supported by daisy chain connection up to 6-device, but in reality, it is only 3 units, so I ask the forum for technical confirmation. Of course total 4 device by 2-port x 2-device daisy chain connecting has working well. The PCI entry in System information indicates that all devices have normal load of the PCIe device driver. Thank you.